scholarly journals Behavior of Normal Concrete Reinforced with Fiber

2021 ◽  
Vol 4 (2) ◽  
pp. 123
Author(s):  
Prabowo Setiyawan
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fiber Length ◽  
Flexural Modulus ◽  
Compressive Test ◽  
Normal Concrete ◽  
Split Tensile Strength ◽  
Concrete Blocks ◽  
Concrete Materials ◽  
Average Compressive Strength

Concrete is a material with the ability to withstand a fairly high pressure, yet it has a low ability to withstand tension. To be utilized as a structure material, improvements need to be made to increase its tensile strength. Addition of fiber in the concrete mixture is recognized to be one among the existing methods to increase the tensile strength. Considering its high tensile strength, This study aimed to examine the compressive strength, the split tensile strength, the flexural and elastic modulus of the normal concrete with Menjalin fibers. The examination was conducted using a cylinder with the diameter of 15 cm and the height of 30 cm and a beam with the size of 15x15x60 cm. Fiber addition was 0.65% of the total concrete materials with various fiber lengths ranging from 2.5 cm, 5 cm, 7.5 cm to 10 cm. The experiment was made by the means of a concrete cylinder compressive test and a flexural test of unreinforced concrete blocks. Results of the study showed, at the age of 21 days, the highest average compressive strength value of 194.37 kg/cm2 and the split tensile strength of 30.43 kg/cm2 in the concrete with fiber of 5 cm long were obtained. The highest flexural modulus value of concrete occurred in the specimen with the fiber length of 7.5 cm (55.7 kg/cm2), while the highest elasticity of concrete occurred in the specimen with the fiber length of 5 cm (2.45x105 kg/cm2).

scholarly journals Sifat Mekanik Beton Serat Ijuk yang Terendam Air Laut

2019 ◽  
Vol 5 (2) ◽  
pp. 102
Author(s):  
Chaeril Anwar ◽  
Erniati Bachtiar ◽  
Nur Khaerat Nur
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Fiber Length ◽  
Sea Water ◽  
Optimum Length ◽  
Normal Concrete ◽  
Split Tensile Strength ◽  
Fiber Concrete ◽  
Research Challenge

This research aims to determine the value of mechanical properties in fiber fibers which are submerged in seawater and to find out the optimum length of fiber fibers to the mechanical properties of fiber fibers which are submerged in sea water. The method used is an experimental method carried out in the laboratory by varying the length of the fibers, which is 25 mm; 50 mm; 75 mm; and 100 mm with 4% fiber addition. Tests of mechanical properties carried out in the form of compressive strength, split tensile strength, and flexural strength. The results of the research challenge the palm fiber-concrete that the longer the fibers used in the concrete, the mechanical properties decrease. Fiber concrete submerged in seawater has higher mechanical properties than normal concrete. Optimum fiber length length in fiber concrete from the results of this study is 25 mm.

scholarly journals Tests on workability and strength of high strength-flowable concrete containing PET waste fiber

2020 ◽  
Vol 7 (3) ◽  
pp. 115-139
Author(s):  
Sarkawt Karim ◽  
◽  
Azad Mohammed ◽  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fiber Length ◽  
High Strength ◽  
Fiber Reinforced Concrete ◽  
Time Increase ◽  
Fiber Volume ◽  
Split Tensile Strength ◽  
Pet Waste ◽  
Strength Tests

This study describes two workability tests, compressive strength and tensile strength tests of high strength flowable concrete containing plastic fiber prepared from polyethylene terephthalate (PET) waste bottles. For the high fluidity mix Vebe time and V-funnel time tests were carried out. Results show that there is a Vebe time increase with PET fiber addition to concrete being increased with increasing fiber volume and fiber length. V-funnel time was found to reduce when up to 0.75% fiber volume is added to concrete, followed by an increase for larger fiber volumes. When fiber length is increase, there is more time increase, but in general, V-funnel time increase was lower than that of Vebe time, indicating a different influence of PET fiber on the compatibility and flowability. The measured V-funnel time for all mixes was found to conform to the limits of European specifications on the flowability of self compacting concrete. Small descending in compressive strength was recorded for RPET fiber reinforced concrete that reached 15.74 % for 1.5 percent fiber content with 10 mm fiber length. Attractive results was recorded in split tensile strength of RPET fibrous samples which resulted in improvement up to 63.3 % for 1.5 percent of 40 mm fiber length content.

scholarly journals An Integrated Evaluation of Manufactured Sand and Metakaolin Impacts on Concrete Properties

2019 ◽  
Vol 8 (12) ◽  
pp. 188-192
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Normal Concrete ◽  
Split Tensile Strength ◽  
Natural Sand ◽  
Manufactured Sand ◽  
Concrete Properties ◽  
Concrete Mix

This paper deals with M25 Concrete mix in which replacing Natural Sand by the Manufacturing Sand of 35% and 65% at Cement by Metakaolin of 0, 5, 10, 15 and 20 percentages is compared with concrete had cement with Metakaolin at different percentages without replacement of natural sand .Workability is determined for Concrete and Cylindrical specimens of 150mm*300mm of size are casted to test Concrete properties such as Split Tensile strength(STS) and Compressive Strength(CS) of Concrete. These specimens are placed under curing of 7days, 28days and 60days; after that time placed under testing and compared the results with Normal Concrete.

scholarly journals Sifat Mekanis Beton Normal dengan Campuran Tepung Marmer

2018 ◽  
Vol 24 (1) ◽  
pp. 71
Author(s):  
Widodo Kushartomo ◽  
Dewi Permata Sari
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Cylindrical Specimen ◽  
Concrete Mixture ◽  
Beam Specimen ◽  
Test Results ◽  
Normal Concrete ◽  
Split Tensile Strength ◽  
Made In

This study is describe about the mechanical properties of normal concrete by adding of marble flour based on the mixed plan made. The compressive strength of the planned test object fc '20.0 and fc' 30.0 MPa was prepared by using the ACI method. The addition of marble flour in a concrete mixture varies from 0%, 5%, 10%, 15%, 20% and 25% to the weight of the cement used. Concrete test specimens were made in the form of cylinders 15.0 cm in diameter, 30.0 cm in height and made in the form of concrete beams measuring 15.0 cm x 15.0 cm x 75.0 cm, the type of mechanical testing performed in the form of compressive strength tests on cylindrical specimen, split tensile strength test on cylindrical specimen and flexure test on beam specimen. Curing is done by immersion technique at 25ºC and the test is done when the concrete is 28 days old. The test results show that the addition of marble flour to the normal concrete mixture can increase its mechanical properties by 26% for compressive strength, 24% for split tensile strength, and 17% for flexural strength. 

scholarly journals The Effect on Strength of Concrete by Partial Replacement of Cement and Fine Aggregate with Flyash, Granite Powder and Plastic Fibres

2019 ◽  
Vol 8 (4) ◽  
pp. 3516-3519
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Power Plants ◽  
Thermal Power ◽  
Raw Material ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Normal Concrete ◽  
Split Tensile Strength ◽  
Granite Powder

The rapid growth of the population leads to a requirement of infrastructure this leads to scarcity of raw material for construction such as cement and sand. The other hand pollution growing due to thermal power plants, granite polishing unit and plastic waste this need to be removed. This gives an idea of using this compound as a raw material in concrete making. This concept found to effective minimizes disposal of fly, granite power and plastic wastes, and leads towards Green Building Concepts. In this investigation of M25 grade normal concrete is made by cement, sand, and aggregate which is tested and compared by special concrete. The concrete mix is prepared as per 10262 -2019 by adding replacing small amount of Fly ash in place of cement OPC 53 grade, and fine aggregate is prepared by partial replacing with granite powder (0%,10%,20%,30%)and another mix is prepared by adding 0.5 nylon fiber, partial replacement of fine aggregate with granite powder (0%,10%,20%,30%)specimens are casted . The casted specimens are tested for split tensile strength and compressive strength 7, 14 and 28 day’s respectively and these results also compared with each other. I t is observed that compressive strength and split tensile of concrete at 28days of curing show max value when compared with normal concrete. When the percentage of granite powder increases to 30% it shows that a decrease in both split tensile strength of concrete and compressive strength. When we added fiber to the concrete there is an increase in compressive strength and split tensile strength but there is a not much increase in compressive strength but increase in split tensile strength

scholarly journals STUDI PEMANFAATAN ABU TERBANG LIMBAH HASIL PEMBAKARAN CAMPURAN CANGKANG DAN SERABUT KELAPA SAWIT SEBAGAI SUBSTITUSI SEMEN PADA PEMBUATAN BETON NORMAL DI LAHAN BASAH

INFO-TEKNIK ◽  
2020 ◽  
Vol 21 (2) ◽  
pp. 227
Author(s):  
Fauzi Rahman ◽  
Gawit Hidayat ◽  
Novita Bertiani
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fly Ash ◽  
Oil Palm ◽  
Combustion Process ◽  
Strength Test ◽  
Strength Analysis ◽  
Normal Concrete ◽  
Split Tensile Strength ◽  
Tensile Strength Test

According to the Badan Pusat Statistik data in 2018, the total area of oil palm plantations in Indonesia currently reaches around 12.3 million hectares. Solid waste is the most waste, which is around 35-40% of the total Fresh Fruit Bunches (FFB) which is processed in the form of empty fruit bunches, fiber, fruit shells, and burnt ash. PT. Hasnur Citra Terpadu in Rantau, Tapin Regency, South Kalimantan is one of the Palm Oil Mill which in the combustion process of a boiler engine using oil palm shells and fibers is burned simultaneously. The result of the combustion process produces waste in the form of boiler crust ash which is fine textured (fly ash) and coarse textured (bottom ash). This study uses fly ash as a cement substitution for concrete mixtures. The making of mortar specimens was varied with fly ash with a percentage of 0%, 10%, 15%, 20% and 25% which will be tested for compressive strength at the age of 3 days, 7 days, 14 days, 21 days, and 28 days. Then the making of concrete specimens is planned with a quality of 25 MPa and the concrete compressive strength is tested at the age of 3 days, 7 days, 14 days, 28 days and 56 days and the split tensile strength test of the concrete at 28 days. Based on the results of the mortar compressive strength analysis, the optimum mixture of fly ash is 10% which is used for making concrete. The average compressive strength of normal concrete at 28 days is 26.33 MPa and the compressive strength of concrete with 10% fly ash (optimum concrete) is 26.14 MPa exceeding the design compressive strength of 25 MPa. Based on the results of the split tensile strength test of concrete at the age of 28 days, it was obtained 3,914 MPa for normal concrete and 3,466 MPa for optimum concrete.

Variasi Penambahan Sika Cim Dan Fiber Kawat Pada Beton Mutu Fc’ 30 Mpa

2018 ◽  
Vol 9 (2) ◽  
pp. 67-73
Author(s):  
M Zainul Arifin
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Curing Temperature ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Astm Method ◽  
Additive Type ◽  
Composition Variation ◽  
Compressive Strength Of Concrete

This research was conducted to determine the value of the highest compressive strength from the ratio of normal concrete to normal concrete plus additive types of Sika Cim with a composition variation of 0.25%, 0.50%, 0.75%, 1.00%, 1.25%, 1 , 50% and 1.75% of the weight of cement besides that in this study also aims to find the highest tensile strength from the ratio of normal concrete to normal concrete in the mixture of sika cim composition at the highest compressive strength above and after that added fiber wire with a size diameter of 1 mm in length 100 mm with a ratio of 1% of material weight. The concrete mix plan was calculated using the ASTM method, the matrial composition of the normal concrete mixture as follows, 314 kg / m3 cement, 789 kg / m3 sand, 1125 kg / m3 gravel and 189 liters / m3 of water at 10 cm slump, then normal concrete added variations of the composition of sika cim 0.25%, 0.50%, 0.75%, 1.00%, 1.25%, 1.5%, 1.75% by weight of cement and fiber, the tests carried out were compressive strength of concrete and tensile strength of concrete, normal maintenance is soaked in fresh water for 28 days at 30oC. From the test results it was found that the normal concrete compressive strength at the age of 28 days was fc1 30 Mpa, the variation in the addition of the sika cim additive type mineral was achieved in composition 0.75% of the cement weight of fc1 40.2 Mpa 30C. Besides that the tensile strength test results were 28 days old with the addition of 1% fiber wire mineral to the weight of the material at a curing temperature of 30oC of 7.5%.

Analysis of Sound Reduction and Strong Drag Composite Concrete Fibers Gedebok Banana Results Delignification with Sodium Hydroxide Solvent (Naoh)

2018 ◽  
Vol 6 (02) ◽  
pp. 105-120
Author(s):  
Muhammad Rouf Suprayogi ◽  
Annisa Mufida ◽  
Edwin Azwar
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Lignin Content ◽  
Sound Intensity ◽  
Cellulose Fiber ◽  
Cellulose Content ◽  
Cellulose Powder ◽  
Drying Method ◽  
Normal Concrete ◽  
Sound Reduction

In composite science, desirable materials that are lighter but have the power and quality that can match or even exceed the material that has been there before. The purpose of this study was to investigate the effect of cellulose fiber addition from banana gedebok to tensile strength, compressive strength and damping of concrete composite sound. To achieve this objective, mixing of cellulose fibers with K-275 quality concrete mix with variation of 0% and 5% substitution in which the cellulose is varied in powder and wicker form. Delignification of lignin content from banana gedebok was done by soaking and drying method without any variation and yielding powder having cellulose content of 13,0388%, hemicellulose 18,2796% and lignin 0,6684%. This study produces concrete composites that have a tensile strength and a compressive strength lower than that of normal concrete. Normally reinforced concrete tensile strength value 94.5 kg / cm2, 71.4 kg / cm2 cellulose powder concrete and 90.3 kg / cm2 cellulose woven concrete. Normal concrete compressive strength value 334,22 kg / cm2, cellulose powder concrete 215,7 kg / cm2, and cellulose webbing concrete 157,98 kg / cm2. As for the power damping sound of cellulose webbing concrete has the highest damping power compared to other concrete with the absorbed sound intensity that is 52-68 dB

scholarly journals Effect of Recycled Coarse Aggregates in Properties of Concrete

2008 ◽  
Vol 3 (4) ◽  
pp. 130-137 ◽  
Author(s):  
R Kumutha ◽  
K Vijai
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Modulus Of Elasticity ◽  
Coarse Aggregate ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Split Tensile Strength ◽  
Coarse Aggregates ◽  
The Cost

The properties of concrete containing coarse recycled aggregates were investigated. Laboratory trials were conducted to investigate the possibility of using recycled aggregates from the demolition wastes available locally as the replacement of natural coarse aggregates in concrete. A series of tests were carried out to determine the density, compressive strength, split tensile strength, flexural strength and modulus of elasticity of concrete with and without recycled aggregates. The water cement ratio was kept constant for all the mixes. The coarse aggregate in concrete was replaced with 0%, 20%, 40%, 60%, 80% and 100% recycled coarse aggregates. The test results indicated that the replacement of natural coarse aggregates by recycled aggregates up to 40% had little effect on the compressive strength, but higher levels of replacement reduced the compressive strength. A replacement level of 100% causes a reduction of 28% in compressive strength, 36% in split tensile strength and 50% in flexural strength. For strength characteristics, the results showed a gradual decrease in compressive strength, split tensile strength, flexural strength and modulus of elasticity as the percentage of recycled aggregate used in the specimens increased. 100% replacement of natural coarse aggregate by recycled aggregate resulted in 43% savings in the cost of coarse aggregates and 9% savings in the cost of concrete.

scholarly journals PENGARUH PENGGUNAAN TANAH MEDITERAN SEBAGAI BAHAN SUBSTITUSI SEMEN TERHADAP KUAT TEKAN DAN TARIK BETON

2020 ◽  
Vol 5 (2) ◽  
pp. 59-71
Author(s):  
Sri Devi Nilawardani
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Coarse Aggregate ◽  
Comparative Method ◽  
Fine Aggregate ◽  
Main Ingredient ◽  
Normal Concrete ◽  
Long Run ◽  
Cement Manufacture ◽  
Initial Idea

Title: The Effect of Using Mediteran Soil as Cement Substitution Materials in Compressive Strength and Tensile Strength of Concrete Concrete is a composite material (mixture) of cement, fine aggregate, coarse aggregate, and water. The potential of limestone in Indonesia is very large, reaching 28.678 billion tons which is the main ingredient in the cement manufacture. In the long run it will be depleted because it is a non-renewable natural resources. So to reduce the use of limestone the utilization of Mediteran soil as a substitution for some cement in the manufacture of concrete is required. The initial idea is based on the chemical composition contained in the Mediteran soil almost identical to the cement, which is carbonate (CaO) and silica (SiO2). The purpose of this research is to reveal the influence of substitution of Mediteran soil by 20% and 40% in the compressive strength and tensile of the concrete at age 3, 7, 14, and 28 days with the number of test specimen each 3 pieces on each variation in 10cm x20cm cylinder with planning of concrete mixture refers to SK SNI method T-15-1900-03. The type of research used is quantitative with the experimental method of laboratory test and data analysis of comparative method and regression. The results show that compressive strength and tensile strength of concrete using Mediteran soil substitution comparable to  the strength of normal concrete with dry treatment. In the composition of 20% Mediteran soils decreased by 51.35% or 7.9 MPa (compressive strength) and 30.60% or 0.93 MPa (tensile strength). While the composition of 40% Mediteran soil decreased by 43.78% or 9.13 MPa (compressive strength) and 2.24% or 1.31 MPa (tensile strength).  

Sign in / Sign up

Export Citation Format

Share Document