scholarly journals ОЦІНЮВАННЯ ФОРМОСТІЙКОСТІ ШКІРЯНИХ МАТЕРІАЛІВ ДЛЯ ВЕРХУ ВЗУТТЯ

2019 ◽  
Vol 134 (3) ◽  
pp. 62-72
Author(s):  
Н. В. Первая
Keyword(s):  
Processing Conditions ◽  
Chrome Tanning ◽  
Production Conditions

The  influence  of  the  processing  conditions  of  leather  for  upper  to  keep  the  shape  after molding by the example of leather for uppers made from pigs' skins using different (vegetable, dialdehyde, syntan, chrome) tanning methods was studied to simulate the process of molding and process of keep the shape after molding on a last under real production conditions

Powder Metallurgy Aluminum Alloys: Structure and Porosity

2019 ◽  
Author(s):  
Will Judge ◽  
Georges Kipouros
Keyword(s):  
Powder Metallurgy ◽  
Aluminum Alloys ◽  
Material Properties ◽  
Cost Effective ◽  
High Reactivity ◽  
Commercial Production ◽  
Processing Conditions ◽  
Near Net Shape ◽  
And Performance ◽  
Production Conditions

The production of aluminum alloys through powder metallurgy (PM) processes allows for the manufacture of net- or near-net-shape components in a cost-effective and sustainable manner. The high reactivity of aluminum metal, however, complicates PM processing, and special attention must be given to certain steps during production, particularly sintering. PM processing conditions strongly affect the structure and porosity of aluminum PM alloys, which ultimately determine their material properties and performance. In this article, the fundamental aspects of the commercial production of aluminum PM alloys are presented, along with the effects of production conditions on the structure and porosity of aluminum PM alloys. The properties and performance of aluminum PM alloys are then analyzed and interpreted with respect to their structure and porosity.

scholarly journals Investigations on the general properties of biomass-based aldehyde tanned sheep fur for its selective post-tanning processing

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Wei Ding ◽  
Ya-nan Wang ◽  
Jianfei Zhou ◽  
Haiteng Liu ◽  
Xiaoyan Pang ◽  
...  
Keyword(s):  
Schiff Base ◽  
Collagen Fiber ◽  
Processing Conditions ◽  
Covalent Bonds ◽  
Acid Sensitivity ◽  
General Properties ◽  
Dyeing Process ◽  
Chrome Tanning ◽  
Ionic Bonds ◽  
Base Structure

Abstract Dialdehyde sodium alginate (DSA) is an alternative chrome-free tanning material for fur production. To obtain satisfactory resultant fur and provide suggestions for the usage of DSA in fur making, the general properties of DSA tanned sheep fur were systematically investigated. The tanning mechanism of DSA was analyzed and it was verified that DSA was mainly combined with collagen fiber by forming Schiff base covalent bonds while supplemented by a small number of hydrogen bonds and ionic bonds. Due to the acid sensitivity of Schiff base structure, DSA tanned fur had poor resistance to acid rinsing but had excellent resistance to washing and good fatliquoring performance. Also, it had good resistances to yellowing and reductant. After being retanned by chrome tanning agent, the fur was capable of enduring a high-temperature dyeing process (68 °C for 8 h). Overall, DSA tanned sheep fur had favorable properties under appropriate post-tanning processing conditions to manufacture light-colored or dark-colored fur products with desirable physical properties. Graphical abstract

Formation of defects in implanted hipox-structures

1992 ◽  
Vol 50 (2) ◽  
pp. 1406-1407
Author(s):  
Peter Pegler ◽  
N. David Theodore ◽  
Ming Pan
Keyword(s):  
High Pressure ◽  
Cross Section ◽  
Semiconductor Devices ◽  
Silicon Substrates ◽  
Processing Conditions ◽  
Pressure Oxidation ◽  
Deep Trench ◽  
Local Oxidation ◽  
Trench Isolation ◽  
And Behavior

High-pressure oxidation of silicon (HIPOX) is one of various techniques used for electrical-isolation of semiconductor-devices on silicon substrates. Other techniques have included local-oxidation of silicon (LOCOS), poly-buffered LOCOS, deep-trench isolation and separation of silicon by implanted oxygen (SIMOX). Reliable use of HIPOX for device-isolation requires an understanding of the behavior of the materials and structures being used and their interactions under different processing conditions. The effect of HIPOX-related stresses in the structures is of interest because structuraldefects, if formed, could electrically degrade devices.This investigation was performed to study the origin and behavior of defects in recessed HIPOX (RHIPOX) structures. The structures were exposed to a boron implant. Samples consisted of (i) RHlPOX'ed strip exposed to a boron implant, (ii) recessed strip prior to HIPOX, but exposed to a boron implant, (iii) test-pad prior to HIPOX, (iv) HIPOX'ed region away from R-HIPOX edge. Cross-section TEM specimens were prepared in the <110> substrate-geometry.

On visions and promises — ethical aspects of in vitro meat

2019 ◽  
Vol 3 (6) ◽  
pp. 753-758
Author(s):  
Silvia Woll
Keyword(s):  
Animal Welfare ◽  
Environmental Issues ◽  
Meat Production ◽  
Ethical Aspects ◽  
Existing Problems ◽  
In Vitro Meat ◽  
Production And Consumption ◽  
Production Conditions

Innovators of in vitro meat (IVM) are convinced that this approach is the solution for problems related to current meat production and consumption, especially regarding animal welfare and environmental issues. However, the production conditions have yet to be fully clarified and there is still a lack of ethical discourses and critical debates on IVM. In consequence, discussion about the ethical justifiability and desirability of IVM remains hypothetical and we have to question those promises. This paper addresses the complex ethical aspects associated with IVM and the questions of whether, and under what conditions, the production of IVM represents an ethically justifiable solution for existing problems, especially in view of animal welfare, the environment, and society. There are particular hopes regarding the benefits that IVM could bring to animal welfare and the environment, but there are also strong doubts about their ethical benefits.

Insecticidal bait development for control of Musca Domestica L.

2020 ◽  
pp. 28-30
Author(s):  
Mikhail A. Levchenko ◽  
Keyword(s):  
Musca Domestica ◽  
Poultry Farm ◽  
Laboratory Studies ◽  
Scientific Center ◽  
Insecticidal Effect ◽  
Invasive Diseases ◽  
Previous Level ◽  
Group Feeding ◽  
Livestock Building ◽  
Production Conditions

The control of houseflies (Musca domestica L.) in veterinary surveillance premises is an important measure for the welfare of animals against infectious and invasive diseases. For this purpose, the most effective chemical insecticides are used. To prevent possible resistance to them, bait insecticides with two active binary ingredients from different chemical classes are used. The work was carried out in the laboratory of the Tyumen Scientific Center and in the production conditions of ZAO Pyshminskaya Poultry Farm. This material presents the main stages in the development of a prototype of the insecticidal bait Mukhnet AX containing two insecticides: 1.5% acetamiprid and 6% chlorfenapir. For this purpose, adults of houseflies Musca domestica L. 3-5 days old were used. Under laboratory conditions, effective rational doses of the above insecticides were determined by group feeding, feeding and by the method of assessing food insecticidal baits when fighting flies from 0.00002 to 4% concentrations. According to the results of laboratory studies, it was found that the optimal doses causing 100% death of insects were 0.5% for acetamiprid and 2% for chlorfenapir. The insecticidal efficiency of the developed bait Mukhnet AH against flies in production conditions on the first day after the treatment of the livestock building was 91.25%. The insecticidal effect of the measures taken lasted for at least 6 days. The restoration of the number to the previous level of the number of insects occurred after 10 days. Based on the results obtained, the Method of using the composition of an insecticidal bait agent in the fight against Musca domestica was proposed and patented.

Progressive Debonding of Multilayer Interconnect Structures

1997 ◽  
Vol 473 ◽  
Author(s):  
Michael Lane ◽  
Robert Ware ◽  
Steven Voss ◽  
Qing Ma ◽  
Harry Fujimoto ◽  
...  
Keyword(s):  
Thin Films ◽  
Crack Growth ◽  
Driving Force ◽  
Adhesion Energy ◽  
Time Dependent ◽  
Multilayer Thin Films ◽  
Processing Conditions ◽  
Interface Morphology ◽  
Entire Sample ◽  
Crack Growth Velocity

ABSTRACTProgressive (or time dependent) debonding of interfaces poses serious problems in interconnect structures involving multilayer thin films stacks. The existence of such subcriticai debonding associated with environmentally assisted crack-growth processes is examined for a TiN/SiO2 interface commonly encountered in interconnect structures. The rate of debond extension is found to be sensitive to the mechanical driving force as well as the interface morphology, chemistry, and yielding of adjacent ductile layers. In order to investigate the effect of interconnect structure, particularly the effect of an adjacent ductile Al-Cu layer, on subcriticai debonding along the TiN/SiO2 interface, a set of samples was prepared with Al-Cu layer thicknesses varying from 0.2–4.0 μm. All other processing conditions remained the same over the entire sample run. Results showed that for a given crack growth velocity, the debond driving force scaled with Al-Cu layer thickness. Normalizing the data by the critical adhesion energy allowed a universal subcriticai debond rate curve to be derived.

Optimization of well product pumpless transportation under offshore oil production conditions

2017 ◽  
pp. 140-142
Author(s):  
A.G. Akhmadeev ◽  
◽  
Pham Thanh Vinh ◽  
Bui Trong Han ◽  
Le Huu Toan ◽  
...  
Keyword(s):  
Oil Production ◽  
Offshore Oil Production ◽  
Offshore Oil ◽  
Production Conditions

Positive effect of preparations with antiviral properties on potato productivity

2020 ◽  
Author(s):  
M.S. Kolychikhina ◽  
Keyword(s):  
Acid Ethyl Ester ◽  
Comparative Assessment ◽  
Marketable Yield ◽  
Potato Plants ◽  
Russian State ◽  
Causative Agents ◽  
Small Plot ◽  
Positive Effect ◽  
Production Conditions ◽  
Chitosan Lactate

In the small-plot experiment of the Russian State Agrarian University - Moscow Timiryazev Agricultural Academy against potato viruses in 2014-2019 were tested some kinds of preparations with antiviral activity: Pharmayod, GS (100 g/l of iodine); Immunocytophyte, TAB (20 g/kg arachidonic acid ethyl ester); Ecogel, WS (30 g/l of chitosan lactate); Amulet, TAB (composition of linear polyaminosaccharides (chitosan) in succinic acid solution); Zerox, WS (3000 mg /l colloidal silver); Viron, WS (biostimulant based on urea and citric acid with the addition of essential oils). According to the results of the studies, it was found that, in addition to the effect on the causative agents of viral diseases of potatoes, all tested preparations had a stable tendency to maintain or increase the yield of tubers of infected plants. The increase in the yield of tubers ranged from 0.5 to 1.3 kg/m2. In 2016 under the production conditions of Astrakhan region on the potato variety Impala infected with the PVM + PVS and PVM + PVS + PVY virus complexes a comparative assessment of the effect of Pharmayod and Immunocytophyte revealed a significant increase in the gross and marketable yield of potato plants in the areas with the use of these preparations compared to with control.

Characteristics of ethanol yeast strains in production conditions under higher mash solids concentration conditions

2019 ◽  
Vol 7 (12) ◽  
pp. 121-127
Author(s):  
Taras Lysak ◽  
◽  
Serhii Oliinichuk ◽  
Olha Koval ◽  
◽  
...  
Keyword(s):  
Yeast Strains ◽  
Solids Concentration ◽  
Production Conditions
Sign in / Sign up

Export Citation Format

Share Document