scholarly journals МОДЕЛЮВАННЯ ЕНЕРГЕТИЧНИХ ПРОЦЕСІВ В ГІБРИДНІЙ ФОТОЕЛЕКТРИЧНІЙ СИСТЕМІ З АКУМУЛЯТОРОМ ДЛЯ ПОТРЕБ ЛОКАЛЬНОГО ОБ’ЄКТУ

2022 ◽  
pp. 28-38
Author(s):  
OLEXANDER SHAVOLKIN ◽  
YEVHEN STANOVSKYI ◽  
MYKOLA PIDHAINYI ◽  
RUSLAN MARCHENKO ◽  
HENNADII KRUHLIAK
Keyword(s):  
System Development ◽  
General Structure ◽  
Rechargeable Battery ◽  
Photoelectric System ◽  
Power Limit ◽  
Control Reconfiguration ◽  
The Cost ◽  
Energy Processes ◽  
Block Structures ◽  
The Mathematical Model

Purpose. Improving the efficiency of a hybrid photoelectric system with a rechargeable battery for the needs of the local object by improving the management of the forecast with simulation of energy processes in the system, development of principles for the implementation of energy management systems.Methodology. Analysis of energy processes in the electrical circuits of the photoelectric system with the formalization of the principles of control reconfiguration and the use of computer modeling based on archival data of photoelectric battery generation to evaluate the efficiency of energy management.Findings. Block structures and the general structure of the model of energy processes in the system for the daily cycle of work with an estimation of the cost of electricity consumed from the grid have been developed. The principles of control modes and power consumption of the system according to the forecast of photoelectric battery generation were formalized.Originality. The principles of setting the battery current according to the forecast of photoelectric energy generation, the state of battery charge and the power limit consumed from the grid have been improved. It will help to make better use of the energy of the photoelectric battery and reduce the consumption of electricity from the grid. The mathematical model of the rechargeable battery, built on the manufacturer's catalog data has been improved. The formalization of energy processes in the system with the use of additional variables, which provide reconfiguration of work with regulation of photoelectric battery generation or battery current and taking into account the power limit consumed from the grid is substantiated.Practical value. The obtained solutions are the basis for designing photoelectric control systems to meet the needs of local objects.

scholarly journals ВИЗНАЧЕННЯ ПАРАМЕТРІВ ФОТОЕЛЕКТРИЧНОЇ СИСТЕМИ З АКУМУЛЯТОРОМ ДЛЯ ПОТРЕБ ЛОКАЛЬНОГО ОБ’ЄКТУ

2022 ◽  
pp. 41-50
Author(s):  
OLEXANDER SHAVOLKIN ◽  
RUSLAN MARCHENKO ◽  
YEVHEN STANOVSKYI ◽  
MYKOLA PIDHAINYI ◽  
HENNADII KRUHLIAK
Keyword(s):  
Archival Data ◽  
Time Intervals ◽  
Average Value ◽  
Cost Of Energy ◽  
Photoelectric System ◽  
Local Facility ◽  
Load Schedule ◽  
The Cost ◽  
Energy Processes ◽  
Generation Power

Purpose. Improving the methodology for determining the parameters of a photoelectric system with a battery for the needs of a local object using archival data of the generation of a photoelectric battery with planning the cost of energy consumption from the network for all seasons of the year.Methodology. Using an archive of data on the power generation of a photoelectric battery and analysis of energy processes in a photoelectric system with a battery using computer simulation.Findings. Calculated according to the archive data for five years, the average monthly values of photoelectric battery generation power for time intervals during the day determined according to tariff zones. Dependencies to determine the recommended average value load power of a local object at time intervals.Originality. It is proposed to determine the base schedule of the local facility and the parameters of the photoelectric system based on the average monthly values of photoelectric battery generation in the transition seasons – October, March and the expected cost of energy consumed from the grid during the year. The recalculation of the base value of power during the year is substantiated taking into account the duration of daylight. A method for determining the recommended load schedule of a local object with the formation of the battery charge according to the average monthly value of the photoelectric battery generation power at time intervals during the day, which are determined by archival data for the object location.Practical value. The obtained solutions are the basis for designing photoelectric systems with a battery to meet the needs of local objects.

Design for Maintenance: How Kms Document Linking Decisions Affect Maintenance Effort and Use

2014 ◽  
Vol 29 (4) ◽  
pp. 312-326 ◽  
Author(s):  
Alan R Dennis ◽  
Binny M Samuel ◽  
Kelly McNamara
Keyword(s):  
Information System ◽  
System Development ◽  
Management Systems ◽  
Information System Development ◽  
Web Based ◽  
Useful Knowledge ◽  
Design Considerations ◽  
Dynamic Content ◽  
System Maintenance ◽  
The Cost

Information system maintenance is an important aspect of information system development, especially in systems that provide dynamic content, such as Web-based systems and Knowledge Management Systems (KMS). Design for Maintenance (DFM) is an approach that argues that maintenance effort should be considered during the design of information systems in addition to the usual system design considerations. This research examines how the design of links among knowledge documents in a KMS affects both their maintenance and use. We argue that providing links among knowledge documents increases the cost of maintenance because when a document changes, the documents that link to and from that document are more likely to need changes. At the same, linking knowledge documents makes it easier to locate useful knowledge and thus increases use. We examine this tension between use and maintenance using 10 years of data from a well-established KMS. Our results indicate that as the number of links among documents increases, both maintenance effort and use for these documents increase. Our analyses suggest two DFM principles for dynamic content in practice. First, knowledge coupling (i.e., linking) to documents internal to the KMS rather than sources external to the KMS better balances maintenance effort and use. Second, designing small, knowledge cohesive documents (e.g., 250-350 words) leads to the best balance between maintenance effort and use.

scholarly journals An Optimized Mathematical Model for Items Supplies Planning of a Logistic System

2016 ◽  
Vol 10 (10) ◽  
pp. 133
Author(s):  
Mohammad Ali Nasiri Khalili ◽  
Mostafa Kafaei Razavi ◽  
Morteza Kafaee Razavi
Keyword(s):  
Mathematical Model ◽  
Mixed Integer ◽  
Logistics System ◽  
Proposed Model ◽  
Multiple Objective Decision Making ◽  
System Requirements ◽  
Purchasing Logistics ◽  
The Cost ◽  
The Mathematical Model ◽  
First Time

Items supplies planning of a logistic system is one of the major issue in operations research. In this article the aim is to determine how much of each item per month from each supplier logistics system requirements must be provided. To do this, a novel multi objective mixed integer programming mathematical model is offered for the first time. Since in logistics system, delivery on time is very important, the first objective is minimization of time in delivery on time costs (including lack and maintenance costs) and the cost of purchasing logistics system. The second objective function is minimization of the transportation supplier costs. Solving the mathematical model shows how to use the Multiple Objective Decision Making (MODM) can provide the ensuring policy and transportation logistics needed items. This model is solved with CPLEX and computational results show the effectiveness of the proposed model.

The Design and Implementation of Code Generation Based on J2EE in the Development of JBPM Workflow System

2012 ◽  
Vol 263-266 ◽  
pp. 1961-1968
Author(s):  
Yong Chao Song ◽  
Bu Dan Wu ◽  
Jun Liang Chen
Keyword(s):  
Software Development ◽  
Code Generation ◽  
System Development ◽  
Source Code ◽  
Design And Implementation ◽  
Workflow System ◽  
Development Cycle ◽  
The Cost ◽  
Static Form

According to the feature of the JBPM workflow system development, the target code generated is determined by analyzing the process of JBPM workflow development and the architecture of J2EE. The code generation tool generates code by parsing the static form source code and loading the code generation template. The code generation tool greatly shortens the JBPM workflow system development cycle and reduces the cost of software development which has the good practicality and scalability.

scholarly journals Test Case Reduction Using Ant Colony Optimization for Object Oriented Program

2015 ◽  
Vol 5 (6) ◽  
pp. 1424
Author(s):  
Sudhir Kumar Mohapatra ◽  
Srinivas Prasad
Keyword(s):  
Ant Colony Optimization ◽  
System Development ◽  
Object Oriented ◽  
Ant Colony ◽  
Test Suite ◽  
Test Case ◽  
Test Cases ◽  
Reduction Techniques ◽  
Maintenance Stage ◽  
The Cost

Software testing is one in all the vital stages of system development. In software development, developers continually depend upon testing to reveal bugs. Within the maintenance stage test suite size grow due to integration of new functionalities. Addition of latest technique force to make new test case which increase the cost of test suite. In regression testing new test case could also be added to the test suite throughout the entire testing process. These additions of test cases produce risk of presence of redundant test cases. Because of limitation of time and resource, reduction techniques should be accustomed determine and take away. Analysis shows that a set of the test case in a suit should satisfy all the test objectives that is named as representative set. Redundant test case increase the execution price of the test suite, in spite of NP-completeness of the problem there are few sensible reduction techniques are available. During this paper the previous GA primarily based technique proposed is improved to search out cost optimum representative set using ant colony optimization.

Design of down-Hole Oil-Water Separation and Reinjection in the same Well System with Surface Driving Single Screw Pump

2011 ◽  
Vol 339 ◽  
pp. 595-602 ◽  
Author(s):  
Chuan Wei Zhao ◽  
Zeng Liang Li
Keyword(s):  
General Structure ◽  
Environmental Benefits ◽  
Screw Pump ◽  
Water Separation ◽  
Single Screw ◽  
Innovative System ◽  
Oil Water Separation ◽  
Oil Water ◽  
Oil Production Technology ◽  
The Cost

Down-hole oil-water separation and reinjection in the same well system can reduce the cost of lifting the water and the ground pollution due to the treatment of production water, which can bring good economic and environmental benefits. By combining down-hole oil-water separation technology with surface driving single screw pump oil production technology, the author designed an innovative system of down-hole oil-water separation and reinjection in the same well. In this paper, the general structure, working principle and structure characteristics of the system are introduced. The structure composition and the connection method of each part are described, and the calculation method of basic parameters of the single screw pump in the system is given.

MATHEMATICAL MODELLING FOR FISH FEED FORMULATION OF MYSTUS NEMURUS SP. CATFISH: OPTIMIZING GROWTH AND NUTRIENTS REQUIREMENTS

2018 ◽  
Vol 80 (6) ◽  
Author(s):  
Nur Aidya Hanum Aizam ◽  
Rabiatul Adawiyah Ibrahim ◽  
Raphael Lee Kuok Lung ◽  
Pang Yen Ling ◽  
Aidilla Mubarak
Keyword(s):  
Mathematical Model ◽  
Nutrient Composition ◽  
Future Research ◽  
Fish Feed ◽  
Research Directions ◽  
Feed Formulation ◽  
Future Research Directions ◽  
The Cost ◽  
The Mathematical Model ◽  
Mystus Nemurus

This study integrates mathematical model in the plan of producing a fish feed formulation by reducing the total cost without neglecting the nutrient requirements. This study focuses on producing the perfect combination of fish feed for Mystus nemurus sp. catfish in different stages of life. The mathematical model developed will consider their required nutrients in each stage, the cost of each ingredient and the amount of nutrients to be consumed (nutrient composition of fish feed ingredients). This research employs AIMMS mathematical software to assist with the computation. The results from this study obtain a much better combination of different ingredients compared to available commercial pellets in terms of nutrient composition and production cost. The combinations yield much cheaper costs yet boosts up the nutrient consumptions, which is an eye-opener for independent local fish farmers. Thorough discussion on utilizing the results with future research directions will also be included.

The Application of Ground Conductivity and Offset Wenner Resistivity Soundings to Optimise the Investigation of a 300 ha Site in the West Midlands

1986 ◽  
Vol 2 (1) ◽  
pp. 241-245
Author(s):  
F. B. Frost ◽  
J. P. Dumble
Keyword(s):  
General Structure ◽  
The West ◽  
Geological Surveys ◽  
Buried Channel ◽  
West Midlands ◽  
Geophysical Techniques ◽  
Sand And Gravel ◽  
The Cost ◽  
Surface Geology ◽  
Ground Conductivity

AbstractIn order to evaluate quickly and cost effectively the detailed shallow sub-surface geology of a 300 ha area in the West Midlands, geophysical techniques were used in conjunction with shell and auger drilling. Since the area contains one of the largest landfill sites of its type in Europe and is crossed by a river which is abstracted for drinking water within a short distance downstream, it was important to determine the geology and hydrogeology in some detail.Previous geological surveys of the area, which included the drilling of over 80 boreholes for sand and gravel extraction, indicated the presence of up to 5 m of highly variable sandy overburden overlying Keuper Marl. It was apparent from an initial desk study that despite the large number of boreholes the geology had been completely misinterpreted.A ground conductivity map was produced using a Geonics EM-31 which rapidly gave a picture of the general structure and identified targets for drilling and Offset Wenner resistivity soundings. The geophysics revealed the presence of a major buried channel cutting deeply into the marl, which was later confirmed in several places by drilling. Surface outcrops of clay or marl could be identified using the ground conductivity values alone.The use of the geophysical techniques has considerably reduced the cost and time of the investigation and has allowed the major effort to be concentrated in problem areas.

The Effect of Temperature and Composition on Spinel Concentration and Crystal Size in High-Level Waste Glass

2001 ◽  
Author(s):  
Martin Mika ◽  
Milan Patek ◽  
Jaroslav Maixner ◽  
Simona Randakova ◽  
Pavel Hrma
Keyword(s):  
Crystal Size ◽  
Equilibrium Concentration ◽  
Effect Of Temperature ◽  
High Level Waste ◽  
Huge Number ◽  
Aluminoborosilicate Glass ◽  
High Level ◽  
The Cost ◽  
Different Content ◽  
The Mathematical Model

Abstract High-level radioactive wastes can be safely immobilized in alkali-aluminoborosilicate glass. To reduce the cost of the vitrification process, the waste loading should be maximized. This can be done by optimizing the process using mathematical modeling. The main objective of our work was to determine one of the necessary inputs for the mathematical model, which is the effect of temperature and composition on the concentration of spinel crystals and their size. We prepared six glasses with a different content of Li+, Na+, Mg2+, Ni2+, Cr3+, and SiIV and studied the effect of composition on the temperature dependence of spinel equilibrium concentration in glass by X-ray powder diffraction. The size of crystals was determined using optical microscopy. It was found that the temperature effect on spinel concentration significantly increased as the content of Ni2+ or Mg2+ in glass increased and slightly decreased as the content of Cr3+ increased and Li+ and Na+ content decreased. Both Ni2+ and Cr3+ acted as nucleating agents, producing a huge number of tiny spinel crystals (∼2 μm). In particular, Ni2+ seems to very significantly facilitate spinel crystallization.

A deterministic inventory model in reverse supply chain

2019 ◽  
Vol 15 (1) ◽  
pp. 318-338 ◽  
Author(s):  
Sasmita Mohapatra ◽  
Ajay Kumar Behera ◽  
Rabindra Mahapatra ◽  
Harish Das
Keyword(s):  
Design Methodology ◽  
Current Model ◽  
Environmental Damage ◽  
Reverse Supply Chain ◽  
Retail Outlet ◽  
Present Value ◽  
Content Type ◽  
Unique Model ◽  
The Cost ◽  
The Mathematical Model

Purpose The purpose of this paper is to present a unique model for the production–recycling–reuse of aluminium refreshment cans. It is presumed that disposed-off 250-ml aluminium cans are collected from the retail outlet. The cans are thereafter arranged into non-tainted and tainted categories. Design/methodology/approach The current model considers all the factors, i.e. producing, recycling and remanufacturing, whereas the previous models provide emphasis only one factor. Six procedures were considered in the improvement of the mathematical model. Findings In this paper, a recycling–reuse model that remanufactures non-tainted aluminium beverage cans and uses regrind from damaged non-tainted aluminium beverage cans mixed with parent aluminium material in the production of new cans was developed and analysed to reduce the amount of aluminium beverage cans that are disposed off in a scrapyard. The model is assumed to have no shortcomings, and the different percentages regarding the classes of cans are taken to be deterministic. Originality/value The model incorporates several unique aspects, including accounting for the cost of land use and associated environmental damage through the calculation of a present value that is charged to the manufacturer.

Sign in / Sign up

Export Citation Format

Share Document