scholarly journals Physical Properties of Rice Husk-Pine Wood Particleboard

2021 ◽  
Vol 1 (1) ◽  
Author(s):  
Z. Z. Low ◽  
◽  
T. C. Lee ◽  
M. A. Selimin ◽  
N. A. Pagan ◽  
...  
Keyword(s):  
Rice Husk ◽  
Urea Formaldehyde ◽  
Solid Wood ◽  
Agricultural Wastes ◽  
Biomass Waste ◽  
Pine Wood ◽  
Significant Difference ◽  
Wood Shaving ◽  
Density Values ◽  
Fibre Loading

Rice husk is one types of sustainable and economical agricultural wastes that could produce particleboard as the substitute for solid wood. The problems that encourage this research are due to the increasing of deforestation and the increment demand for solid wood in various industries. Malaysia produces a significant amount of agricultural biomass waste every year. It is noteworthy to mention that agricultural wastes can be fully used in an environmentally friendly way. This study aims to evaluate the properties of particleboard made from rice husk at different fibre loading and mixture. Different formulated composition of rice husk and pine wood shaving was prepared for the production of particleboard by hot pressing at temperature 160 °C for 6 min using Urea-Formaldehyde (UF) resin with additional of ammonium chloride (NH4Cl) as a hardener. The results showed the density values and moisture content of particleboards ranging from 0.547 to 0.660 g/cm3 and 8.072 to 8.929 %, respectively. The thickness swelling and water absorption were increased as the increment of soaking time. Besides, the colour of the rice husk-pine particleboards has no significant difference and changes except for particleboard made from 100% rice husk. While the more proportion of pine wood shaving has the better compaction of particleboards, and the addition of grinded rice husk also make the particleboards have fewer voids. This study is expected to reduce deforestation activities and to maximize the usage of agricultural wastes.

Laccase-catalyzed functionalization with 4-hydroxy-3-methoxybenzylurea significantly improves internal bond of particle boards

Holzforschung ◽  
2008 ◽  
Vol 62 (2) ◽  
pp. 223-229 ◽  
Author(s):  
Karin Fackler ◽  
Thomas Kuncinger ◽  
Thomas Ters ◽  
Ewald Srebotnik
Keyword(s):  
Internal Bond ◽  
Treatment Time ◽  
Urea Formaldehyde ◽  
Treated Wood ◽  
Untreated Wood ◽  
Strength Properties ◽  
Positive Interactions ◽  
Formaldehyde Resin ◽  
Significant Difference ◽  
Wood Particles

Abstract Enzymatic functionalization is an attractive tool to provide a reactive interface for further processing of lignocellulosic materials, such as wood particles and fibers. Here, spruce wood particles have been functionalized by fungal laccase combined with 4-hydroxy-3-methoxy-benzylamine (HMBA) or 4-hydroxy-3-methoxybenzylurea (HMBU). The expectation was crosslinking with resins in subsequent glueing processes, which should improve strength properties of particle boards. Essential process parameters, such as liquid to solid mass ratio and treatment time, were optimized on a laboratory scale resulting in HMBA and HMBU binding yields of 90% and above as determined by radiochemical mass balance analysis. We employed a multifactorial experimental design for board production from treated wood particles and urea/formaldehyde resin. Mechanical testing and multivariate data analysis revealed, for the first time, an increase of internal bond (IB) as a result of functionalization with HMBU. HMBA was not successful. Variance analysis of relevant parameters and their interactions demonstrated a highly significant difference (P>99.99%) between boards treated with laccase/HMBU versus untreated wood particles. Due to positive interactions, functionalization was most effective at high bulk density (750 kg m-3) and high resin content (10%) resulting in a calculated IB improvement of 0.12 N m-2 (21%).

scholarly journals Effect of wood vinegar and rice husk biochar on soil properties and growth performances of immature kenaf (Hibiscus cannabinus) planted on BRIS soil

2021 ◽  
Vol 9 (1) ◽  
pp. 48-57
Author(s):  
Mohd Fauzie Jusoh Jusoh ◽  
Lai Jai Xin ◽  
Ch'ng Huck Ywih ◽  
Palsan Sannasi Abdullah ◽  
Noraida Mohd Radzi ◽  
...  
Keyword(s):  
Soil Properties ◽  
Rice Husk ◽  
Hibiscus Cannabinus ◽  
Wood Vinegar ◽  
Growth Performances ◽  
Significant Difference ◽  
Number Of Leaves ◽  
Rice Husk Biochar ◽  
Positive Effect ◽  
Problematic Soil

Beach ridges interspersed with swales (BRIS) soil is identified as one of Malaysia's problematic soil since this type of soil contains a plethora portion of sand texture that contributes to water and nutrient leaching causes infertile soil. A polybag trial was conducted to evaluate the effects of wood vinegar and rice husk biochar on soil properties and growth performances of immature kenaf. The plant was arranged in a completely randomised design with four treatments and three replications. The factors taken for the experiment were four different media compositions, i.e., T1(control), T2(BRIS soil amended with wood vinegar, WV), T3(BRIS soil amended with rice husk biochar, RHB) and T4(BRIS soil amended with wood vinegar and rice husk biochar, WV+RHB). Rice husk biochar and a combination of wood vinegar with rice husk biochar significantly improved soil properties in terms of soil moisture content, organic matter, water retention and soil porosity, as well as significantly increased the kenaf stem diameter. However, there was no significant difference in plant height, number of leaves, leaves area and chlorophyll content on different treatments medium. In conclusion, the application of rice husk biochar and wood vinegar in this study enhanced BRIS soil properties and showed a positive effect on the growth of immature kenaf.

scholarly journals The effect of feeding behavior of Monochamus alternatus (Coleoptera: Cerambycidae) on the departure of pine wood nematode, Bursaphelenchus xylophilus (Nematoda: Aphelenchoididae)

2019 ◽  
Author(s):  
Yang Wang ◽  
Fengmao Chen ◽  
Lichao Wang ◽  
Lifeng Zhou ◽  
Juan Song
Keyword(s):  
Oxidative Phosphorylation ◽  
Feeding Behavior ◽  
Bursaphelenchus Xylophilus ◽  
Pine Wood Nematode ◽  
Monochamus Alternatus ◽  
Pine Wood ◽  
Start Date ◽  
Significant Difference ◽  
Departure Date ◽  
Effect Of Feeding

AbstractIn order to study the causes of pine wood nematode (PWN) departure from Monochamus alternatus, the effects of the feeding behavior of M. alternatus on the start date of the departure of PWN were studied. The start date of the departure of PWN carried by the directly fed M. alternatus was 5—13 d after beetle emergence, mainly concentrated within 6—10 d, with a mean (±SD) of 8.02 ± 1.96 d. The start date of the departure of PWN carried by the M. alternatus fed after starvation was 5—14 d after beetle emergence, mainly concentrated within 6—9 d, with a mean of 7.76 ± 2.28 d. The results show that there was no significant difference in the start departure date of PWN between the two treatments. This shows that the feeding behavior of M. alternatus is not the trigger for PWN departure. At the same time, it was found that the motility of the PWN carried by M. alternatus at 8 d after emergence was significantly greater than that of the PWN carried by the newly emerged M. alternatus. And the PWN carried by M. alternatus at 8 d after emergence was extracted more easily than the PWN carried by newly emerged beetles. These results show that greater motility was associated with easier departure of PWN from M. alternatus. In addition, transcriptome sequencing found that the level of oxidative phosphorylation metabolism of PWN carried by beetles at 8 d after emergence was significantly higher than that in the PWN carried by newly emerged beetle. High oxidative phosphorylation was associated with increased energy production and motility by the PWN and were the internal cause of the start of nematode departure.

scholarly journals KUALITAS PAPAN PARTIKEL BERDASARKAN KOMPOSISI SEKAM PADI DAN KAYU SENGON DENGAN VARIASI KADAR PEREKAT

2019 ◽  
Vol 7 (2) ◽  
Author(s):  
Dendi Prayoga ◽  
. Dirhamsyah ◽  
. Nurhaida
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Rice Husk ◽  
Raw Materials ◽  
Urea Formaldehyde ◽  
Physical And Mechanical Properties ◽  
Solid Content ◽  
Particle Board ◽  
Rice Husks ◽  
Wood Processing

This research aimed to examine the physical and mechanical properties of particle boards based on the composition of raw materials and adhesive content and know the treatment of the composition of raw materials and the best adhesive content and meet the standard JIS A 5908-2003. The research was conducted at Wood Workshop Laboratory, Wood Processing Laboratory Faculty of Forestry,Tanjungpura University and Laboratory of PT. Duta Pertiwi Nusantara Pontianak. The adhesive used is Urea Formaldehyde with 52% Solid Content. Comparison of the composition of rice husks and sengon varies namely rice husk 50%: sengon 50%, rice husk 60%: sengon 40% and rice husk 70%: sengon 30%  and variations in the levels of UF adhesives, namely 14% and 16%, with target density 0,7 gr/cm3. The particleboard was 30 cm x 30 cm x 1 cm Pressing at temperature 140oC for 8 minutes, with  pressure of 25 kg/cm2. The research results of the study of density and moisture content meet the standards JIS A 5908-2003. The best particle values of rice husk and sengon  with composition a ratio of  rice husk 50%: sengon 50% , 16% adhesive content  16%, with density value of  0,7072 gr/cm3, moisture content 9,1949 %, thick development 12,3210 %, water absorption 68,8270 %, MOE 12110,7273 kg/cm2, MOR 161,0025 kg/cm2, firmness sticky 1,9320 kg/cm2, screw holding strength 62,3124 kg.Keywords : adhesive, composition, particle board, rice husk, sengon

scholarly journals Feasibility of using fallen tea leaves as litter in broiler rearing

2012 ◽  
Vol 41 (1) ◽  
pp. 52-54
Author(s):  
S Chakma ◽  
MY Miah ◽  
A Ara ◽  
MH Kawsar
Keyword(s):  
Body Weight ◽  
Moisture Content ◽  
Rice Husk ◽  
The Body ◽  
Tea Leaves ◽  
Saw Dust ◽  
Wood Shavings ◽  
Wood Shaving ◽  
Ad Libitum ◽  
The Cost

One hundred eighty straight run day old Cobb-500 broilers were reared on rice husk, sawdust, wood shaving and chopped tea leaves litter up to 35 days of age. The broilers were fed ad libitum. At 35 days the body weight of chicken reared on sawdust attained the highest body weight (p<0.01) than other litters. FCR was the best on saw dust. The moisture content of different litters did not differ significantly. Oocyst population in rice husk was found to be higher (p<0.01) than those on other litters, except those reared on wood shaving. Moisture content of litters and oocyst population were positively correlated at 14 and 35 days and negatively correlated at 21 and 28 days of age. The litter cost per broiler and per kg broiler was the highest on rice husk (RH), intermediate on sawdust (SD), Wood shavings (WS) and the lowest on chopped fallen tea leaves (CFTL). It was concluded that it may be possible to minimize the cost of litter by using CFTL.http://dx.doi.org/10.3329/bjas.v41i1.11978

scholarly journals Effects of Foliar Application of Urea and Urea-Formaldehyde/Triazone on Soybean and Corn Crops

Agronomy ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1549
Author(s):  
Bruno Maia Abdo Rahmen Cassim ◽  
Antonio Pedro Martins Machado ◽  
Daniel Fortune ◽  
Fernando Rodrigues Moreira ◽  
Éder Júnior De Oliveira Zampar ◽  
...  
Keyword(s):  
Slow Release ◽  
Foliar Application ◽  
Block Design ◽  
Urea Formaldehyde ◽  
Nitrogen Fertilizers ◽  
Urea Solution ◽  
Corn Yield ◽  
Nitrogen Release ◽  
Randomized Block Design ◽  
Significant Difference

The objective of the study was to evaluate the effect of foliar application of urea and urea-formaldehyde, triazone-based fertilizers on soybean and corn crops. Four experiments were carried out, two on soybeans, one on first season corn, and the other on second season corn. The experiments were conducted using a randomized block design, with 5 treatments studied: T1—control without application of foliar nitrogen (N); T2—foliar application of conventional urea solution and three treatments with Hexion foliar fertilizers based on urea-formaldehyde and triazone (N-Hexion®), with varying levels of N and slow-release components; T3—Hexion 1; T4—Hexion 2; and T5—Hexion 3. The foliar application of conventional urea showed no statistically significant difference in relation to the control for the yield components and grain yield for the soybean crops in seasons 2018–2019 and 2019–2020. Urea-formaldehyde/triazone treatments showed a significant increase in yield for soybeans in the 2018–2019 season compared to the control and to conventional urea. Nitrogen fertilizers with high percentages of slow-release compounds promote nitrogen release more slowly, which led to no significant increase in yield for Hexion 1. No statistical differences were observed in the corn yield for the first and second crop.

scholarly journals Recycling Waste of Rice Husk to Improve Entrepreneurship Motivation

2016 ◽  
Vol 5 (1) ◽  
pp. 75
Author(s):  
Fatwa Tentama ◽  
Surahma Asti Mulasari ◽  
Muchsin Maulana ◽  
Rini Anggraeni
Keyword(s):  
Rice Husk ◽  
T Test ◽  
Control Group ◽  
Control Groups ◽  
Control Group Design ◽  
Paired Sample ◽  
Growing Medium ◽  
Significant Difference ◽  
Before And After ◽  
And Control

The farmers in Indonesia have not maximally taken advantage of the existence of rice husk; therefore the huge number of the husk becomes disturbing waste, which spoils environment. The waste of rice husk is potentially capable of improving the farmers’ economy amidst the people’s lack of knowledge about its potential to commercially produce charcoal briquettes from it, make it a plant growing medium, and change it into manure. This research aims at knowing if the training of recycling waste of rice husk can improve the farmers’ entrepreneurship motivation. The subjects of the research were farmers in groups at Bimomartani village, Ngemplak district, Sleman regency. They were 60 participants divided into experintal and control groups. The planned experiment used <em>untreated control group design with dependent pretest and posttest samples.</em> The <em>paired sample t-test</em> and <em>independent sample t-test</em> were used as the techniques of analysis in this research. The result of t-test on <em>paired sample t-test</em> for the experimental group resulted in the value of t = -6.659 with p = 0.000 (p&lt;0.01), which means there was a significant difference of entrepreneurship motivation before and after the training of recycling rice husk. The analysis for <em>Independent sample t-test</em> resulted in the value of t = 7.411 with p = 0.000 (p&lt;0.01), which means there was a significant difference of entrepreneurship motivation between experimental and control groups. It can be concluded that the training of recycling waste of rice husk was effective in improving the farmers’ entrepreneurship motivation.

scholarly journals Chemical and Structural Characterization of Poplar and Black Pine Wood Exposed to Short Thermal Modification

2021 ◽  
Vol 72 (2) ◽  
pp. 155-167
Author(s):  
Vasiliki Kamperidou
Keyword(s):  
Raw Materials ◽  
Solid Wood ◽  
Thermal Modification ◽  
Moisture Loss ◽  
Black Pine ◽  
Pine Wood ◽  
Application Range ◽  
Ft Ir ◽  
And Performance ◽  
Wood Based Composite

In this study, poplar and black pine wood was exposed to short thermal treatments, aiming to improve some crucial properties. Using wet chemical analyses and Fourier-transform infrared spectroscopy (FT-IR), the influence of these treatments on the chemical composition of the modified species was investigated, as well as on the wood structure, using scanning electron microscopy. With the increase of heat treatment intensity, a mass loss of both species was recorded, attributed to the moisture loss and degradation of volatile compounds, as well as thermally less stable components. In the first treatment stages, the extractives presented a decrease, whereas with the duration and temperature increase, new extractives were formed. Lignin increased its network through ramification, especially at 200 ºC, while holocellulose was found lower in all modified wood categories of both species than in unmodified wood due to the intense decomposition of hemicelluloses. The findings of FT-IR analyses were in line with the chemical analysis results. The thermal modification process made wood materials more hydrophobic and dimensionally stable, providing protection against decomposing factors. At the same time, they were not intensively thermo-degraded, which increased their utilization perspectives and application range as solid wood of enhanced properties, or as wood particles/fibers participating as raw materials in wood-based composite products, wood-polymers composites etc., enhancing their materials compatibility, properties and performance.

Sign in / Sign up

Export Citation Format

Share Document