scholarly journals Application of Fenton reagent and adsorption as advanced treatment processes for removal of Maxilon Red GRL

2017 ◽  
Vol 20 (1) ◽  
pp. 1-6 ◽  
Keyword(s):  
Batch Reactor ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Advanced Treatment ◽  
Fenton Process ◽  
Optimum Conditions ◽  
Fenton Reagent ◽  
Treatment Processes ◽  
Experimental Parameters ◽  
Adsorbent Dose

<p>In this paper, the removal of Maxilon Red GRL by adsorption onto raw soil sample known as Niğde (Bor) grape molasses soil and Fe+2/H2O2 reagent as advanced treatment processes were investigated. The effects of various experimental parameters such as initial Fe+2 and H2O2 concentrations, pH, temperature, contact time, initial adsorbent dose, and initial dye concentration on adsorption and Fenton process efficiencies were studied in a batch reactor. The adsorption experimental data were modeled by Langmuir and Freundlich isotherm models. The data fitted well with the Langmuir isotherm (R2&gt;0.99). The optimum conditions had been determined and found that efficiency of decolorization obtained after 20 min of reaction, was about 99.4% for Fenton process.</p>

scholarly journals Phenol adsorption from wastewater using cashew nut shells as adsorbent

2018 ◽  
Vol 7 (3) ◽  
pp. 966
Author(s):  
Kartik Kulkarni ◽  
Varsha Sudheer ◽  
C R Girish
Keyword(s):  
Agricultural Waste ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Multilayer Adsorption ◽  
Phenol Adsorption ◽  
Cashew Nut ◽  
Experimental Parameters ◽  
Order Kinetic Model

The potential of agricultural waste cashew nut shells as an adsorbent for removing phenol from wastewater is presented in this paper. The adsorbent was treated with 3M sulphuric acid in order to improve the properties. The experimental parameters such as adsorbent dosage, concentration and temperature were optimized with response surface methodology (RSM). The isotherm data were tested with different isotherm models and it obeyed Freundlich Isotherm showing the multilayer adsorption. The kinetic data satisfied pseudo-first order kinetic model. The maximum adsorption capacity was calculated to be 35.08 mg/g proving the capability of cashew nut shells for removing phenol from wastewater.  

scholarly journals Uptake of p-Nitrophenol (PNP) from model aqueous solutions using raw and quaternised Afromomum melegueta peels

2020 ◽  
Vol 1 (1) ◽  
pp. 1-8
Author(s):  
J. Ndiritu ◽  
I W. Mwangi ◽  
J. I. Murungi ◽  
R. N. Wanjau
Keyword(s):  
Quaternary Ammonium ◽  
Anthropogenic Activities ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Ammonium Compound ◽  
Cellulose Structure ◽  
Experimental Parameters ◽  
Ftir Technique ◽  
Design Simplicity ◽  
The Impact

 Anthropogenic activities contribute large amounts of pollutants to the environment which threaten animal and human health. There is increased realization of the effect of these toxins on surface and ground water, consequently, their elimination is vital in rendering secure water for drinking as well as culpable release of effluents to our habitats. Phenolic compounds cause serious health effects to both humans and animals; a p-Nitrophenol concentration of 1 ppb changes the taste and odour of water as well as meat and fish quality. In humans, exposure to PNP causes eye and skin burns while its interaction with blood leads to confusion, cyanosis and unconsciousness. It is imperative therefore to find ways for removing PNP from water. Among the available techniques for removing PNP from water, adsorption is more convenient and offers more advantages because of its design, simplicity, and operating flexibility. The present study involved application of peels of raw Afromomum melegueta (RAM) and quaternised Afromomum melegueta (QAM) to remove PNP from water through adsorption. The raw adsorbents were modified with a quaternary ammonium salt to improve their uptake efficiency. The impact of experimental parameters; contact time, pH, sorbent dose, temperature and concentration were investigated. Attenuated FTIR technique was employed to characterize the adsorbent materials. It was established that the quaternary ammonium compound was anchored chemically within the cellulose structure of Afromomum melegueta peels. The behavior of adsorption of PNP was investigated using Langmuir and Freundlich isotherm models. The physical sorption load was 8.70 and 106.38 mg/g for RAM and QAM peels respectively from Langmuir adsorption equation. Uptake of PNP is high at the first 30 mins of contact and at sorbent dosage of 0.01 g and 0.03 g for RAM and QAM respectively. Quantity of PNP removed increases as the initial concentration rises however, adsorption decreases after a concentration exceeding 30 mg/L. The ideal pH and temperature for PNP removal is at pH 3 and 25 ˚C respectively. In conclusion, the findings suggest that Afromomum melegueta peels can be friendly to the environment, cheap biosorbents and efficient which can be applied for the uptake of PNP from drinking water

scholarly journals Removal of Fluoride from Drinking Water by Sorption Using Diatomite Modified with Aluminum Hydroxide

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Tesfaye Akafu ◽  
Achalu Chimdi ◽  
Kefyalew Gomoro
Keyword(s):  
Aluminum Hydroxide ◽  
Contact Time ◽  
Fluoride Concentration ◽  
Freundlich Isotherm ◽  
Intraparticle Diffusion ◽  
Fluoride Removal ◽  
Contaminated Water ◽  
Optimum Conditions ◽  
Intraparticle Diffusion Model ◽  
Adsorbent Dose

Exposure to fluoride beyond the recommended level for longer duration causes both dental and skeletal fluorosis. Thus, the development of cost-effective, locally available, and environmentally benign adsorbents for fluoride removal from contaminated water sources is absolutely required. In the present study, diatomaceous earth (diatomite) locally available in Ethiopia, modified by treating it with an aluminum hydroxide solution, was used as an adsorbent for fluoride removal from aqueous solutions. Adsorption experiments were carried out by using batch contact method. The adsorbent was characterized using FT-IR spectroscopy. Effects of different parameters affecting efficiency of fluoride removal such as adsorbent dose, contact time, initial fluoride concentration, and pH were investigated and optimized. The optimum adsorbent dose, contact time, initial fluoride concentration, and pH values were 25 g/L, 180 min, 10 mg/L, and 6.7, respectively. The performance of the adsorbent was also tested under optimum conditions using groundwater samples taken from Hawassa and Ziway. Langmuir and Freundlich isotherm models were applied to describe the equilibrium data. Compared to Langmuir isotherm (R2 = 0.888), the Freundlich isotherm (R2 = 0.985) model was better fitted to describe the adsorption characteristics of fluoride on Al-diatomite. The Langmuir maximum adsorption capacity was 1.67 mg/g. The pseudosecond-order model was found to be more suitable than the pseudofirst-order to describe the adsorption kinetics. The low correlation coefficient value of R2 = 0.596 for the intraparticle diffusion model indicates that the intraparticle diffusion model does not apply to the present studied adsorption system. The maximum fluoride removal was observed to be 89.4% under the optimum conditions which indicated that aluminum hydroxide-modified diatomite can be used as efficient, cheap, and ecofriendly adsorbents for the removal of fluoride from contaminated water.

scholarly journals Uptake of Cationic Dyes from Aqueous Solution by Biosorption onto GranularMuntingia calabura

2009 ◽  
Vol 6 (3) ◽  
pp. 737-742 ◽  
Author(s):  
T. Santhi ◽  
S. Manonmani ◽  
S. Ravi
Keyword(s):  
Aqueous Solution ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Cationic Dyes ◽  
Isotherm Models ◽  
Experimental Conditions ◽  
Experimental Parameters ◽  
Initial Ph ◽  
Rate Kinetics ◽  
Muntingia Calabura

A new, low cost, locally available biomaterial was tested for its ability to remove cationic dyes from aqueous solution. A granule prepared from a mixture of leafs, fruits and twigs ofMuntingia calaburahad been utilized as a sorbent for uptake of three cationic dyes, methylene blue (MB), methylene red (MR) and malachite green (MG). The effects of various experimental parameters (e.g.,contact time, dye concentration, adsorbent dose and pH) were investigated and optimal experimental conditions were ascertained. Above the value of initial pH 6, three dyes studied could be removed effectively. The isothermal data fitted the Langmuir and Freundlich isotherm models for all three dyes sorption. The biosorption processes followed the pseudo-first order rate kinetics. The results in this study indicated thatMuntingia calaburawas an attractive candidate for removing cationic dyes from the dye wastewater.

scholarly journals Yellow 2G dye degradation by electro-Fenton process using steel electrode as catalysis and its phytotoxicity effect

2020 ◽  
Author(s):  
Amel Benhadji ◽  
Mourad Taleb Ahmed
Keyword(s):  
Dye Degradation ◽  
Batch Reactor ◽  
Reaction Times ◽  
Fenton Process ◽  
Optimum Conditions ◽  
Germination Test ◽  
Solution Ph ◽  
Steel Electrode ◽  
Initial Ph ◽  
Current Densities

Abstract The heterogeneous electro-Fenton process degradation of Yellow 2G from wastewater was studied using a batch reactor. The COD of the wastewater used in treatment experiments was 163 mg O2·L−1 and the BOD5 was 17 mg O2·L−1 (hardly biodegradable). The treatment of the wastewater at different current densities (2.5 mA·cm−2–12.5 mA·cm−2), solution pH (3 and 6.6), reaction times (5–25 min), electrolyte nature (NaCl, Na2SO4) and electrolyte concentrations (0.15 g·L−1–1 g·L−1) was investigated. According to the results, the heterogeneous electro-Fenton process was suitable for the decolorization of wastewater containing Yellow 2G. The optimum conditions were current density of 12.5 mA·cm−2, initial pH of the wastewater neutral, 25 min of electrolysis treatment using an additive steel electrode as a source of catalysis and in the presence of 1 g NaCl·L−1. We obtained easily biodegradable water with a mineralization rate equal to 85% and non-toxicity confirmed by the pea grain germination test.

The Study of Copper (II) Removal from Aqueous Solutions by Adsorption Using Corn Stalk Material

2012 ◽  
Vol 610-613 ◽  
pp. 1950-1953
Author(s):  
Zheng Jun Gong ◽  
Wenbo Zhou ◽  
Zhong Ping Qiu
Keyword(s):  
Aqueous Solutions ◽  
Contact Time ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Corn Stalk ◽  
Absorption Process ◽  
Optimum Conditions ◽  
Batch Mode ◽  
Langmuir Adsorption ◽  
Initial Ph

In this study, removal of copper(Ⅱ) from aqueous solutions was examined using corn stalk. In the batch mode adsorption studies, the effects of initial pH and contact time on the copper(Ⅱ) adsorption by the corn stalk have been studied. The results show that: the pH 6.0 and contact time 8 hrs is optimum conditions of this absorption process when the dosage of corn stalk is 0.1g. In the isotherm studies, the Langmuir and Freundlich isotherm models were applied. The R2 of the Langmuir and Freundlich isotherm are 0.981 and 0.944 respectively. The Langmuir adsorption capacity Qmax is 54.05 mg/g. The goodness of fitness was obtained with the Langmuir and Freundlich adsorption isotherms.

scholarly journals Removal of lead (II) from aqueous solutions using rice straw

2017 ◽  
Vol 76 (5) ◽  
pp. 1011-1021 ◽  
Author(s):  
Hayam Amer ◽  
Ahmed El-Gendy ◽  
Salah El-Haggar
Keyword(s):  
Rice Straw ◽  
Low Cost ◽  
Research Work ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Optimum Conditions ◽  
Optimum Parameters ◽  
Removal Of Heavy Metals ◽  
Maximum Removal

Lead (Pb2+) is a heavy metal which is utilized in several industries and can have severe impact on the environment and human health. Research work has been carried out lately on the feasibility of using various low cost materials in the removal of heavy metals from wastewater. In this study, the feasibility of utilizing raw rice straw for removal of Pb2+ from water through biosorption was investigated using batch equilibrium experiments. The effect of several operating parameters on the removal of Pb2+ using rice straw was studied, revealing the optimum parameters at an initial Pb2+ concentration of 40 mg/l were: 30 min contact time at a pH of 5.5, particle size 75–150 μm and a dose of 4 g/l. A maximum removal of 94% was achieved under optimum conditions. Langmuir and Freundlich isotherm models were used for the evaluation of the equilibrium experimental data. The maximum adsorption capacity of rice straw calculated using the Langmuir isotherm was 42.55 mg/g.

scholarly journals Advanced Treatment of Pesticide-Containing Wastewater Using Fenton Reagent Enhanced by Microwave Electrodeless Ultraviolet

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Gong Cheng ◽  
Jing Lin ◽  
Jian Lu ◽  
Xi Zhao ◽  
Zhengqing Cai ◽  
...  
Keyword(s):  
Organic Contaminants ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Advanced Treatment ◽  
Order Kinetic ◽  
Fenton Process ◽  
Optimal Conditions ◽  
Fenton Reagent ◽  
Doc Concentration ◽  
Initial Ph

The photo-Fenton reaction is a promising method to treat organic contaminants in water. In this paper, a Fenton reagent enhanced by microwave electrodeless ultraviolet (MWEUV/Fenton) method was proposed for advanced treatment of nonbiodegradable organic substance in pesticide-containing biotreated wastewater. MWEUV lamp was found to be more effective for chemical oxygen demand (COD) removal than commercial mercury lamps in the Fenton process. The pseudo-first order kinetic model can well describe COD removal from pesticide-containing wastewater by MWEUV/Fenton, and the apparent rate constant (k) was 0.0125 min−1. The optimal conditions for MWEUV/Fenton process were determined as initial pH of 5, Fe2+dosage of 0.8 mmol/L, and H2O2dosage of 100 mmol/L. Under the optimal conditions, the reaction exhibited high mineralization degrees of organics, where COD and dissolved organic carbon (DOC) concentration decreased from 183.2 mg/L to 36.9 mg/L and 43.5 mg/L to 27.8 mg/L, respectively. Three main pesticides in the wastewater, as Dimethoate, Triazophos, and Malathion, were completely removed by the MWEUV/Fenton process within 120 min. The high degree of pesticides decomposition and mineralization was proved by the detected inorganic anions.

Box–Behnken Design for Optimizing the Synthesis Condition and Adsorption Capability of Covalently Crosslinked Chitosan/coal Fly Ash Composite

2021 ◽  
Author(s):  
Ibrahim Awad Mohammed ◽  
Nurul Najwa Abd Malek ◽  
Ali H. Jawad ◽  
Mohd Sufri Mastuli ◽  
Zeid A. Al-Othman
Keyword(s):  
Fly Ash ◽  
Coal Fly Ash ◽  
Freundlich Isotherm ◽  
Polluted Water ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Box Behnken Design ◽  
Crosslinked Chitosan ◽  
Adsorbent Dose

Abstract The growing concern regarding the environmental protection has encouraged researchers to focus their efforts on developing better and more effective possibilities of removing pollutants. In this research, a biocomposite adsorbent of covalently crosslinked chitosan-epichlorohydrin/coal fly ash (CHT-ECH/CFA) was synthesized and applied for reactive red 120 dye (RR120) removal. The CHT-ECH/CFA was characterized by BET, pH potentiometric, pHpzc, XRD, FTIR and SEM-EDX. Box–Behnken Design (BBD) was employed to assess the effects of the adsorption key parameters such as CFA loading into CTH-ECH matrix, adsorbent dose, solution pH, working temperature and contact time. The optimized CFA loading, adsorbent dose, temperature, time, and pH were observed to be 50 %, 0.07 g, 45 °C, 60 min, and pH 4 respectively. From BBD, the highest removal of RR120 removal at optimum conditions was found to be 90.2%. The results showed that adsorption performance can be modelled perfectly by both Langmuir and Freundlich isotherm models with maximum adsorption capacity of 237.7 mg/g at 45 °C. Moreover, the adsorption kinetics were well fitted to the pseudo-second order model. Based on the findings from the experiments conducted, the hybrid biocomposite adsorbent offers adequate potential for the treatment of anionic dye-polluted water.

Sign in / Sign up

Export Citation Format

Share Document