Conventional electron microscope TEM -100 (Made by “ELECTRON”, Sumy, USSR; Fig. 1) was presented at the XI Int. Congress on Electron Microscopy (Kyoto) by I.S. Lyalko et al. (1,2). The purpose of the microscope constructors were to design a small-sized general conventional TEM for various application fields. The microscope have mini lenses, which winding is placed in closed casing and soaked in working liquid (low boiling temperature) but upper part of the casing being water cooled.In this communication we gave our first experience and impression as a customer, beginning from the montage, the instruction and the testing of the microscope to our application in the field of biological specimens. Just after montage of the microscope on the second floor, the test of the point resolution power was performed by Ir specimen. It was achieved 0.5 nm (Fig. 2 and 3) on the roll film (ORWO 22 DIN) with 300 OOOx magnification and anticontamination device. The ultimate vacuum (about 10exp-6 mm Hg, ion discharge pump) also achieved using large trap cooled by liquid nitrogen.