scholarly journals Кормление длиннопалого речного рака корневой растительной биомассой высших растений в качестве монодиеты

2013 ◽  
pp. 49-53
Author(s):  
О. А. Пальчик ◽  
Е. А. Дехтярева ◽  
М. А. Панчишный
Keyword(s):  
Root Biomass ◽  
Mixed Type ◽  
Higher Plants ◽  
Chemical Properties ◽  
Root Mass ◽  
Test Results ◽  
Terrestrial Plants ◽  
Trial Testing

У статті наведено результати пробного тесту-вання корму для ракоподібних у вигляді кореневої рос-линної біомаси вищих наземних рослин у якості моно-дієти. Результати тестування свідчать про те, що годівля кореневою біомасою вищих наземних рослин є більш ефективною, ніж змішаний тип харчування. Серед дослідних варіантів найкращі біометричні по-казники річкових раків зафіксовані в разі годівлі коре-невою масою салату. У ході дослідження встановле-но, що за розміщення в акваріумі кореневої частини вищих рослин, хімічні показники води поступово по-кращуються, тобто наземні вищі рослини, як і водні, здатні очищувати воду. The article contains results of trial testing fodder for crustaceans in the form of the root biomass of higher terrestrial plants as a mono-diet. Test results indicate that the feeding of root biomass of higher terrestrial plants is more efficient than the mixed type of food. Among the studied variants the best biometrics of crayfish was recorded during feeding by the root mass of lettuce. The study has found that when you place in an aquarium the root of higher plants, the chemical properties of water are gradually improving, that is, terrestrial higher plants as well as water can purify the water.

Bioprospecting Cryptogams as Potential Source of Unique Biodynamic Phytochemicals with Diverse Pharmaceutical Applications

2016 ◽  
Vol 1 (1) ◽  
Author(s):  
Brahma N. Singh ◽  
Garima Pandey ◽  
Prateeksha ◽  
J. Kumar
Keyword(s):  
Secondary Metabolites ◽  
Higher Plants ◽  
New Drugs ◽  
Terrestrial Plants ◽  
Pharmacological Activities ◽  
Therapeutic Drugs ◽  
Potential Source ◽  
Therapeutic Value ◽  
Wide Range ◽  
Novel Structures

With the advent of green pharmaceuticals, the secondary metabolites derived from plants have provided numerous leads for the development of a wide range of therapeutic drugs; however the discovery of new drugs with novel structures has declined in the past few years. Cryptogams including lichens, bryophytes, and pteridophytes represent a group of small terrestrial plants that remain relatively untouched in the drug discovery process though some have been used as ethnomedicines by various tribes worldwide. Studies of their secondary metabolites are recent but reveal unique secondary metabolites which are not synthesized by higher plants. These compounds can have the potential to develop more potential herbal drugs for prevention and treatment of diseases The present article . deals with the secondary metabolites and pharmacological activities of cryptogams with an objective to bring them forth as potential source of biodynamic compounds of therapeutic value.

scholarly journals Performance Study of Grass-Derived Nano-Cellulose and Polycaprolactone Composites for 3D Printing

2021 ◽  
Vol 11 (3) ◽  
pp. 1273
Author(s):  
Chen Feng ◽  
Jiping Zhou ◽  
Xiaodong Xu ◽  
Yani Jiang ◽  
Hongcan Shi ◽  
...  
Keyword(s):  
3D Printing ◽  
Mechanical Test ◽  
Chemical Properties ◽  
Test Results ◽  
Performance Study ◽  
Compression Process ◽  
Ansys Fluent ◽  
Nano Cellulose ◽  
Physical And Chemical ◽  
And Chemical Properties

In recent years, 3D printing has received increasing attention from researchers. This technology overcomes the limitations of traditional technologies by printing precise and personalized scaffold with arbitrary shapes, pore structures, and porosities for the applications in various tissues. The cellulose nanocrystal (CNC) is extracted from Humulus Japonicus (HJS) and mixed with poly(ε-caprolactone) (PCL) to prepare a series of CNC/PCL composites for printing. Based on the analysis of the physical and chemical properties of the series of the CNC/PCL composites, an optimal mass ratio of CNC to PCL was obtained. The Solidworks was used to simulate the stretching and compression process of the scaffolds with three different patterns under an external force. The flow of nutrient solution in the scaffolds with different patterns was simulated by ANSYS FLUENT, and then a new optimization scaffold pattern with a concave hexagon shape was advised based on the simulation results. Collectively, the mechanical test results of the material and scaffold confirmed that the optimal filling amount of the CNC was 5%, and the scaffold pattern with concave hexagon shape exhibited better mechanical properties and suitable for the transport of cells and nutrients, which is expected to be more widely used in 3D printing.

scholarly journals The Influence Of NO/O2 On The NOx Storage Properties Over A Pt-Ba-Ce/γ-Al2O3 Catalyst

2019 ◽  
Vol 17 (1) ◽  
pp. 1459-1465
Author(s):  
Xuedong Feng ◽  
Jing Yi ◽  
Peng Luo
Keyword(s):  
Sol Gel ◽  
Chemical Properties ◽  
No Oxidation ◽  
Test Results ◽  
X Ray Diffraction ◽  
Storage Performance ◽  
Transmission Electron ◽  
Temperature Programmed ◽  
Physical And Chemical ◽  
Al2o3 Catalyst

AbstractWith the purpose of studying the influence of NO/O2 on the NOx storage activity, a Pt-Ba-Ce/γ-Al2O3 catalyst was synthesized by an acid-aided sol-gel method. The physical and chemical properties of the catalyst were characterized by X-ray diffraction (XRD) and Transmission Electron Microscope (TEM) methods. The results showed that the composition of the catalyst was well-crystallized and the crystalline size of CeO2 (111) was about 5.7 nm. The mechanism of NO and NO2 storage and NOx temperature programmed desorption (NO-TPD) experiments were investigated to evaluate the NOx storage capacity of the catalyst. Pt-Ba-Ce/γ-Al2O3 catalyst presented the supreme NOx storage performance at 350℃, and the maximum value reached to 668.8 μmol / gcat. Compared with O2-free condition, NO oxidation to NO2 by O2 had a beneficial effect on the storage performance of NOx. NO-TPD test results showed that the NOx species stored on the catalyst surface still kept relatively stable even below 350℃.

Fine root biomass and nutrient content in a black spruce peat soil with and without alder

1998 ◽  
Vol 78 (1) ◽  
pp. 163-169 ◽  
Author(s):  
J. S. Bhatti ◽  
N. W. Foster ◽  
P. W. Hazlett
Keyword(s):  
Fine Roots ◽  
Root Biomass ◽  
Fine Root ◽  
Black Spruce ◽  
Peat Soil ◽  
Chemical Properties ◽  
Nutrient Content ◽  
Fine Root Biomass ◽  
Boreal Peatlands ◽  
Strong Positive Relationship

Vertical distribution of fine root biomass and nutrient content was examined within a black spruce (Picea mariana) stand growing on a boreal peat soil in northeastern Ontario. The influence of site physical and chemical properties on fine root biomass production was assessed. More then 80% of the fine roots were present in moss plus the top 10 cm of peat where nutrients and aeration are most favourable. The fine root biomass (W/V) was significantly higher with alder (5.9 kg m−3) (Alnus rugosa) as understory vegetation compared to non-alder locations (2.9 kg m−3). Total nutrient content in fine roots was 54, 3.2, 5.4, 63 and 5.7 kg ha−1 on the alder site and 20, 1.4, 2.3, 28 and 4.2 kg ha−1 of N, P, K, Ca, and Mg on the non-alder site, respectively. The mass (W/V) of nutrients in fine roots was strongly dependent upon the availability of nutrients in the peat. Fine root content had a strong positive relationship with peat available P and exchangeable K contents suggesting that P and K may be limiting nutrients for black spruce in this peat soil. Key words: Nitrogen, phosphorus, potassium, boreal peatlands, aeration, water table

scholarly journals Effect of Nano Charcoal Ash Coconut Shell in Bitumen as Alternative Binder

2019 ◽  
Vol 8 (3S3) ◽  
pp. 517-523
Keyword(s):  
Softening Point ◽  
Performance Test ◽  
Chemical Properties ◽  
Coconut Shell ◽  
Size Analysis ◽  
Test Results ◽  
Median Particle ◽  
Physical And Chemical ◽  
Grinding Time ◽  
And Chemical Properties

The effect of Nano charcoal ash (NCA) from coconut shell on the physical and chemical properties of bitumen as alternative binder was evaluated in this study. Six different Nano grades of charcoal ash were examined. The charcoal ash ground for the optimum grinding time had a median particle size of 148 nm. NCA dosage of 30% by weight of binder was used throughout the experiments. Nanoparticle size analysis and X-ray fluorescence were performed to determine the size and chemical properties of material. Dynamic shear rheometer, penetration, softening point, and penetration index were used to characterize the physical properties of NCA. Thirty hours of grinding time produced the optimum NCA, which could enhance the binder performance. Test results indicated that adding NCA from coconut shell to bitumen improved the binder stiffness up to 47% and significantly increased the softening point up to 12% compared with virgin binder.

scholarly journals Chloroplasts in C3 grasses move in response to blue-light

2020 ◽  
Vol 39 (10) ◽  
pp. 1331-1343 ◽  
Author(s):  
Weronika Krzeszowiec ◽  
Maria Novokreshchenova ◽  
Halina Gabryś
Keyword(s):  
Blue Light ◽  
Higher Plants ◽  
Brachypodium Distachyon ◽  
Photosynthetic Apparatus ◽  
Light Signaling ◽  
Terrestrial Plants ◽  
Energy Capture ◽  
Chloroplast Movements ◽  
C3 Grasses ◽  
The One

Abstract Key message Brachypodium distachyonis a good model for studying chloropla st movements in the crop plants, wheat, rye and barley. The movements are activated only by blue light, similar to Arabidopsis. Abstract Chloroplast translocations are ubiquitous in photosynthetic organisms. On the one hand, they serve to optimize energy capture under limiting light, on the other hand, they minimize potential photodamage to the photosynthetic apparatus in excess light. In higher plants chloroplast movements are mediated by phototropins (phots), blue light receptors that also control other light acclimation responses. So far, Arabidopsis thaliana has been the main model for studying the mechanism of blue light signaling to chloroplast translocations in terrestrial plants. Here, we propose Brachypodium distachyon as a model in research into chloroplast movements in C3 cereals. Brachypodium chloroplasts respond to light in a similar way to those in Arabidopsis. The amino acid sequence of Brachypodium PHOT1 is 79.3% identical, and that of PHOT2 is 73.6% identical to the sequence of the corresponding phototropin in Arabidopsis. Both phototropin1 and 2 are expressed in Brachypodium, as shown using quantitative real-time PCR. Intriguingly, the light-expression pattern of BradiPHOT1 and BradiPHOT2 is the opposite of that for Arabidopsis phototropins, suggesting potential unique light signaling in C3 grasses. To investigate if Brachypodium is a good model for studying grass chloroplast movements we analyzed these movements in the leaves of three C3 crop grasses, namely wheat, rye and barley. Similarly to Brachypodium, chloroplasts only respond to blue light in all these species.

scholarly journals A Silent Exonic Mutation in a Rice Integrin-α FG-GAP Repeat-Containing Gene Causes Male-Sterility by Affecting mRNA Splicing

2020 ◽  
Vol 21 (6) ◽  
pp. 2018 ◽  
Author(s):  
Ting Zou ◽  
Dan Zhou ◽  
Wenjie Li ◽  
Guoqiang Yuan ◽  
Yang Tao ◽  
...  
Keyword(s):  
Pollen Development ◽  
Molecular Mapping ◽  
Higher Plants ◽  
Donor Site ◽  
Splice Junction ◽  
Splice Donor Site ◽  
Terrestrial Plants ◽  
Male Sterile ◽  
Intron Splice ◽  
Rice Mutant

Pollen development plays crucial roles in the life cycle of higher plants. Here we characterized a rice mutant with complete male-sterile phenotype, pollen-less 1 (pl1). pl1 exhibited smaller anthers with arrested pollen development, absent Ubisch bodies, necrosis-like tapetal hypertrophy, and smooth anther cuticular surface. Molecular mapping revealed a synonymous mutation in the fourth exon of PL1 co-segregated with the mutant phenotype. This mutation disrupts the exon-intron splice junction in PL1, generating aberrant mRNA species and truncated proteins. PL1 is highly expressed in the tapetal cells of developing anther, and its protein is co-localized with plasma membrane (PM) and endoplasmic reticulum (ER) signal. PL1 encodes an integrin-α FG-GAP repeat-containing protein, which has seven β-sheets and putative Ca2+-binding motifs and is broadly conserved in terrestrial plants. Our findings therefore provide insights into both the role of integrin-α FG-GAP repeat-containing protein in rice male fertility and the influence of exonic mutation on intronic splice donor site selection.

Structural Thermodynamic Model for the Durability and Viscosity of Nuclear Waste Glasses

1987 ◽  
Vol 112 ◽  
Author(s):  
Xiangdong Feng ◽  
Aaron Barkatt
Keyword(s):  
Nuclear Waste ◽  
Composition Dependence ◽  
Glass Composition ◽  
Chemical Properties ◽  
Test Results ◽  
Structural Rules ◽  
Predominant Factor ◽  
Alkali Oxides ◽  
Bond Strengths ◽  
And Chemical Properties

AbstractA model based upon structural thermodynamic considerations has been proposed for both chemical durability and viscosity of nuclear waste glasses. This model assumes the bond strength between atoms in the glass to be the predominant factor in controlling the composition dependence of physical properties such as viscosity and chemical properties like durability. These characteristic bond strengths in the glass are obtained from known heats of formation of the constituent oxides with a few simple structural rules deduced by distinguishing the structural roles of the various oxides, i.e., separating those components that are clearly “network-formers” (e.g. SiO2, Al2O3, ZrO2) from those that are clearly “network-breakers” (e.g. alkali oxides). This model has been successfully applied to the correlation of glass composition with modified MCC-3 leach test results on nuclear waste glasses measured at various laboratories on one hand and with the viscosities of numerous glasses over a temperature range of 850°C to 1600°C with remarkable accuracy on the other hand.

Fine root growth dynamics in teak (Tectonagrandis Linn. F.)

1986 ◽  
Vol 16 (6) ◽  
pp. 1360-1364 ◽  
Author(s):  
S. K. Srivastava ◽  
K. P. Singh ◽  
R. S. Upadhyay
Keyword(s):  
Root Growth ◽  
Root Biomass ◽  
Fine Root ◽  
Growth Dynamics ◽  
Temporal Variations ◽  
Fine Root Biomass ◽  
Tropical Region ◽  
Root Bark ◽  
Root Mass ◽  
Root Dynamics

Temporal variations in the spatial distribution of fine root mass were studied in a 19-year-old teak plantation in a dry tropical region. The soil block method was used to investigate fine root dynamics. Quantification of fine root mass was achieved in terms of live teak roots (separated by diameter), dead teak roots, teak root bark, herb roots, and fragmented soil organic matter. The annual mean fine root biomass was 5420 kg•ha−1 and the net production was 5460 kg•ha−1•year−1. The bulk of the root mass was distributed at a depth of 10–30 cm and roots ≤2 mm constituted one-half or more of the total root biomass. Maximum live root growth occurred during the rainy season. All root sizes showed similar bimodal seasonal patterns, but the maximum:minimum ratio generally declined with greater root size.

Root mass for oilseed and pulse crops: Growth and distribution in the soil profile

2009 ◽  
Vol 89 (5) ◽  
pp. 883-893 ◽  
Author(s):  
Y T Gan ◽  
C A Campbell ◽  
H H Janzen ◽  
R Lemke ◽  
L P Liu ◽  
...  
Keyword(s):  
Root Growth ◽  
Soil Profile ◽  
Root Biomass ◽  
Rooting Depth ◽  
Growth Stages ◽  
Root Mass ◽  
Distribution Profile ◽  
Brassica Napus L ◽  
Organic C ◽  
Pulse Crops

Crop roots transport water and nutrients to the plants, produce nutrients when they decompose in soil, and provide organic C to facilitate the process of C sequestration in the soil. Many studies on these subjects have been published for cereal crops, but little is known for oilseed and pulse crops. This study was conducted at Swift Current, Saskatchewan, in 2006 and 2007 to characterize the root growth and distribution profile in soil for selected oilseed and pulse crops. Three oilseed [canola (Brassica napus L.), mustard (Brassica juncea L.), flax (Linum usitatissimum L.)], three pulse crops [chickpea (Cicer arietinum L), dry pea (Pisum sativum L.) lentil (Lens culinaris Medik.)], and spring wheat (Triticum aestivum L.) were grown in 100 cm deep × 15 cm diameter lysimeters pushed into a silt loam soil. Crops were studied under rainfed and irrigated conditions. Lysimeters were removed from the field and sampled for above-ground (AG) and root mass at different depths at five growth stages. Root mass was highest for canola (1470 kg ha-1) and wheat (1311 kg ha-1), followed by mustard (893 kg ha-1) and chickpea (848 kg ha-1), and was lowest for dry pea (524 kg ha-1) and flax (440 kg ha-1). The root mass of oilseeds and pulses reached a maximum between late-flowering and late-pod stages and then decreased to maturity, while wheat root mass decreased to maturity after reaching a maximum at boot stage. On average, about 77 to 85% of the root mass was located in the 0-40 cm depth. Canola, mustard, and wheat rooted to 100 cm, while the pulses and flax had only 4 to 7% of the root mass beyond the 60 cm depth. Irrigation only increased root mass in the 0-20 cm depth. Roots developed more rapidly than AG biomass initially, but the ratio of root biomass to AG biomass decreased with plant maturity. At maturity, the ratio of root biomass to AG biomass was 0.11 for dry pea, and between 0.20 and 0.22 for the other crops tested. Our findings on rooting depths and root mass distribution in the soil profile should be useful for modelling water and nutrient uptake by crops, estimating C inputs into soil from roots, and developing diverse cropping systems with cereals, oilseeds and pulses for semiarid environments.Key words: Root growth, root biomass, rooting depth, chickpea, lentil, pea, canola, mustard, flax, root:shoot ratio

Sign in / Sign up

Export Citation Format

Share Document