Joint Seal Practices in the United States: Observations and Considerations

1998 ◽  
Vol 1627 (1) ◽  
pp. 7-12 ◽  
Author(s):  
Dennis A. Morian ◽  
Shelley Stoffels
Keyword(s):  
The United States ◽  
Coarse Grained ◽  
Pavement Performance ◽  
Joint Movement ◽  
Rigid Pavement ◽  
Fine Grained ◽  
Rigid Pavements ◽  
Naturally Occurring ◽  
Local Experience ◽  
Performance Results

In recent years, states have adopted a wide variety of joint sealing practices for jointed rigid pavements, based on local experience. Over time, the adoption of quality control/quality assurance practices has resulted in decreased inspection and attention that ensure compliance with good joint seal installation practices. At this time, several agencies have adopted or are considering a policy of providing for rigid pavement joints by using a single 3-mm (1/8-in.) saw cut. Agencies are either leaving this saw cut unfilled or filling it with hot-poured sealant, recognizing that it is not effectively sealed. This practice may prove acceptable where positive drainage features are naturally occurring (coarse-grained subgrade) or where climates are very hot and dry, resulting in minimal joint movement. Other agencies continue to use established joint-sealing practices with good pavement performance results. This approach continues to be a prudent one, particularly in wet climates with fine-grained subgrade materials. Here slab-support erosion has been shown to result in accelerated deterioration of jointed rigid pavements.

Correlation between dislocation, grain boundary and interface of duplex SS in stress corrosion cracking(SCC)

1990 ◽  
Vol 48 (4) ◽  
pp. 928-929
Author(s):  
Wang Zheng-fang ◽  
Z.F. Wang
Keyword(s):  
Stainless Steel ◽  
Thermal Cycle ◽  
Secondary Phase ◽  
Corrosion Cracking ◽  
Coarse Grained ◽  
Test Environment ◽  
Fine Grained ◽  
Evaluation Test ◽  
Welding Thermal Cycle ◽  
Micro Analysis

The main purpose of this study highlights on the evaluation of chloride SCC resistance of the material,duplex stainless steel,OOCr18Ni5Mo3Si2 (18-5Mo) and its welded coarse grained zone(CGZ).18-5Mo is a dual phases (A+F) stainless steel with yield strength:512N/mm2 .The proportion of secondary Phase(A phase) accounts for 30-35% of the total with fine grained and homogeneously distributed A and F phases(Fig.1).After being welded by a specific welding thermal cycle to the material,i.e. Tmax=1350°C and t8/5=20s,microstructure may change from fine grained morphology to coarse grained morphology and from homogeneously distributed of A phase to a concentration of A phase(Fig.2).Meanwhile,the proportion of A phase reduced from 35% to 5-10°o.For this reason it is known as welded coarse grained zone(CGZ).In association with difference of microstructure between base metal and welded CGZ,so chloride SCC resistance also differ from each other.Test procedures:Constant load tensile test(CLTT) were performed for recording Esce-t curve by which corrosion cracking growth can be described, tf,fractured time,can also be recorded by the test which is taken as a electrochemical behavior and mechanical property for SCC resistance evaluation. Test environment:143°C boiling 42%MgCl2 solution is used.Besides, micro analysis were conducted with light microscopy(LM),SEM,TEM,and Auger energy spectrum(AES) so as to reveal the correlation between the data generated by the CLTT results and micro analysis.

Civil sphere and democracy in Latin America

2020 ◽  
pp. 23-40
Author(s):  
Jeffrey Ch. Alexander ◽  
Carlo Tognato
Keyword(s):  
Latin America ◽  
Social Relations ◽  
Political Institutions ◽  
The United States ◽  
Way Of Life ◽  
Global Context ◽  
Fine Grained ◽  
Class Stratification ◽  
Civil Sphere ◽  
The Everyday

The purpose of the article is to demonstrate that the civil spheres of Latin America remain in force, even when under threat, and to expand the method of theorizing democracy, understanding it not only as a state form, but also as a way of life. Moreover, the task of the authors goes beyond the purely application of the theory of the civil sphere in order to emphasize the relevance not only in practice, but also in the theory of democratic culture and institutions of Latin America. This task requires decolonizing the arrogant attitude of North theorists towards democratic processes outside the United States and Europe. The peculiarities of civil spheres in Latin America are emphasized. It is argued that over the course of the nineteenth century the non-civil institutions and value spheres that surrounded civil spheres deeply compromised them. The problems of development that pockmarked Latin America — lagging economies, racial and ethnic and class stratification, religious strife — were invariably filtered through the cultural aspirations and institutional patterns of civil spheres. The appeal of the theory of the civil sphere to the experience of Latin America reveals the ambitious nature of civil society and democracy on new and stronger foundations. Civil spheres had extended significantly as citizens confronted uncomfortable facts, collectively searched for solutions, and envisioned new courses of collective action. However when populism and authoritarianism advance, civil understandings of legitimacy come under pressure from alternative, anti-democratic conceptions of motives, social relations, and political institutions. In these times, a fine-grained understanding of the competitive dynamics between civil, non-civil, and anti-civil becomes particularly critical. Such a vision is constructively applied not only to the realities of Latin America, but also in a wider global context. The authors argue that in order to understand the realities and the limits of populism and polarization, civil sphere scholars need to dive straight into the everyday life of civil communities, setting the civil sphere theory (CST) in a more ethnographic, “anthropological” mode.

How Artefacts Do Leadership: A Ventriloquial Analysis

2021 ◽  
pp. 089331892199807
Author(s):  
Jonathan Clifton ◽  
Fernando Fachin ◽  
François Cooren
Keyword(s):  
Organizational Communication ◽  
Recent Work ◽  
Distributed Leadership ◽  
Network Theory ◽  
Actor Network Theory ◽  
Fine Grained ◽  
Naturally Occurring ◽  
Human Actors

To date there has been little work that uses fine-grained interactional analyses of the in situ doing of leadership to make visible the role of non-human as well as human actants in this process. Using transcripts of naturally-occurring interaction as data, this study seeks to show how leadership is co-achieved by artefacts as an in-situ accomplishment. To do this we situate this study within recent work on distributed leadership and argue that it is not only distributed across human actors, but also across networks that include both human and non-human actors. Taking a discursive approach to leadership, we draw on Actor Network Theory and adopt a ventriloquial approach to sociomateriality as inspired by the Montreal School of organizational communication. Findings indicate that artefacts “do” leadership when a hybrid presence is made relevant to the interaction and when this presence provides authoritative grounds for influencing others to achieve the group’s goals.

scholarly journals Balanced Sparsity for Efficient DNN Inference on GPU

2019 ◽  
Vol 33 ◽  
pp. 5676-5683 ◽  
Author(s):  
Zhuliang Yao ◽  
Shijie Cao ◽  
Wencong Xiao ◽  
Chen Zhang ◽  
Lanshun Nie
Keyword(s):  
Deep Neural Networks ◽  
General Purpose ◽  
Coarse Grained ◽  
Efficient Computation ◽  
Model Accuracy ◽  
Sparse Model ◽  
Model Inference ◽  
Fine Grained ◽  
Practical Inference ◽  
Speed Up

In trained deep neural networks, unstructured pruning can reduce redundant weights to lower storage cost. However, it requires the customization of hardwares to speed up practical inference. Another trend accelerates sparse model inference on general-purpose hardwares by adopting coarse-grained sparsity to prune or regularize consecutive weights for efficient computation. But this method often sacrifices model accuracy. In this paper, we propose a novel fine-grained sparsity approach, Balanced Sparsity, to achieve high model accuracy with commercial hardwares efficiently. Our approach adapts to high parallelism property of GPU, showing incredible potential for sparsity in the widely deployment of deep learning services. Experiment results show that Balanced Sparsity achieves up to 3.1x practical speedup for model inference on GPU, while retains the same high model accuracy as finegrained sparsity.

scholarly journals Submarine lava deltas of the 2018 eruption of Kīlauea volcano

2021 ◽  
Vol 83 (4) ◽  
Author(s):  
S. Adam Soule ◽  
Michael Zoeller ◽  
Carolyn Parcheta
Keyword(s):  
Grain Size ◽  
Pore Pressure ◽  
Mechanistic Model ◽  
Large Fraction ◽  
Volcanic Hazards ◽  
Lava Flows ◽  
Coarse Grained ◽  
Fine Grained ◽  
Fine Grain ◽  
Delta Formation

AbstractHawaiian and other ocean island lava flows that reach the coastline can deposit significant volumes of lava in submarine deltas. The catastrophic collapse of these deltas represents one of the most significant, but least predictable, volcanic hazards at ocean islands. The volume of lava deposited below sea level in delta-forming eruptions and the mechanisms of delta construction and destruction are rarely documented. Here, we report on bathymetric surveys and ROV observations following the Kīlauea 2018 eruption that, along with a comparison to the deltas formed at Pu‘u ‘Ō‘ō over the past decade, provide new insight into delta formation. Bathymetric differencing reveals that the 2018 deltas contain more than half of the total volume of lava erupted. In addition, we find that the 2018 deltas are comprised largely of coarse-grained volcanic breccias and intact lava flows, which contrast with those at Pu‘u ‘Ō‘ō that contain a large fraction of fine-grained hyaloclastite. We attribute this difference to less efficient fragmentation of the 2018 ‘a‘ā flows leading to fragmentation by collapse rather than hydrovolcanic explosion. We suggest a mechanistic model where the characteristic grain size influences the form and stability of the delta with fine grain size deltas (Pu‘u ‘Ō‘ō) experiencing larger landslides with greater run-out supported by increased pore pressure and with coarse grain size deltas (Kīlauea 2018) experiencing smaller landslides that quickly stop as the pore pressure rapidly dissipates. This difference, if validated for other lava deltas, would provide a means to assess potential delta stability in future eruptions.

scholarly journals A cooperative DDoS attack detection scheme based on entropy and ensemble learning in SDN

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Shanshan Yu ◽  
Jicheng Zhang ◽  
Ju Liu ◽  
Xiaoqing Zhang ◽  
Yafeng Li ◽  
...  
Keyword(s):  
Ensemble Learning ◽  
Denial Of Service ◽  
Attack Detection ◽  
Coarse Grained ◽  
Communication Overhead ◽  
Detection Scheme ◽  
Fine Grained ◽  
Ddos Attack ◽  
Network Status ◽  
Ddos Attack Detection

AbstractIn order to solve the problem of distributed denial of service (DDoS) attack detection in software-defined network, we proposed a cooperative DDoS attack detection scheme based on entropy and ensemble learning. This method sets up a coarse-grained preliminary detection module based on entropy in the edge switch to monitor the network status in real time and report to the controller if any abnormality is found. Simultaneously, a fine-grained precise attack detection module is designed in the controller, and a ensemble learning-based algorithm is utilized to further identify abnormal traffic accurately. In this framework, the idle computing capability of edge switches is fully utilized with the design idea of edge computing to offload part of the detection task from the control plane to the data plane innovatively. Simulation results of two common DDoS attack methods, ICMP and SYN, show that the system can effectively detect DDoS attacks and greatly reduce the southbound communication overhead and the burden of the controller as well as the detection delay of the attacks.

Rheology of hydrocarbon gels

1950 ◽  
Vol 200 (1061) ◽  
pp. 183-188 ◽  
Keyword(s):  
Mechanical Properties ◽  
Experimental Measurement ◽  
Theoretical Basis ◽  
Continuous Media ◽  
Point Of View ◽  
Coarse Grained ◽  
Testing Instrument ◽  
Fine Grained ◽  
Mineral Oils ◽  
Space And Time

Hydrocarbon gels contain a number of materials, such as rubber, greases, saponified mineral oils, etc., of great interest for various engineering purposes. Specific requirements in mechanical properties have been met by producing gels in appropriately chosen patterns of constituent components of visible, colloidal, molecular and atomic sizes, ranging from coarse-grained aggregates, represented by sponges, foams, emulsions, etc.; to fine-grained and apparently homogeneous ones, represented by optically clear compounds. The engineer who has to deal with the whole range of such materials will adopt a macroscopic point of view, based on an apparent continuity of all the material structures and of the distributions in space and time of the displacements and forces occurring under mechanical actions. It has been possible to determine these distributions in the framework of a comprehensive scheme in which the fundamental principles of the mechanics of continuous media provide the theoretical basis, and a testing instrument of new design, termed Rheogoniometer, the means of experimental measurement (Weissenberg 1931, 1934, 1946, 1947, 1948).

Microstructural Refinement in a Commercial Aluminum Alloy Processed by ECAP Using a Die Channel Angle of 110 Degrees

2015 ◽  
Vol 1114 ◽  
pp. 3-8
Author(s):  
Nicolae Şerban ◽  
Doina Răducanu ◽  
Nicolae Ghiban ◽  
Vasile Dănuţ Cojocaru
Keyword(s):  
Grain Refinement ◽  
Cross Section ◽  
High Strength ◽  
Secondary Phase ◽  
Coarse Grained ◽  
Metallographic Analysis ◽  
Second Phase ◽  
Channel Angle ◽  
Ambient Temperatures ◽  
Fine Grained

The properties of ultra-fine grained materials are superior to those of corresponding conventional coarse grained materials, being significantly improved as a result of grain refinement. Equal channel angular pressing (ECAP) is an efficient method for modifying the microstructure by refining grain size via severe plastic deformation (SPD) in producing ultra-fine grained materials (UFG) and nanomaterials (NM). The grain sizes produced by ECAP processing are typically in the submicrometer range and this leads to high strength at ambient temperatures. ECAP is performed by pressing test samples through a die containing two channels, equal in cross-section and intersecting at a certain angle. The billet experiences simple shear deformation at the intersection, without any precipitous change in the cross-section area because the die prevents lateral expansion and therefore the billet can be pressed more than once and it can be rotated around its pressing axis during subsequent passes. After ECAP significant grain refinement occurs together with dislocation strengthening, resulting in a considerable enhancement in the strength of the alloys. A commercial AlMgSi alloy (AA6063) was investigated in this study. The specimens were processed for a number of passes up to nine, using a die channel angle of 110°, applying the ECAP route BC. After ECAP, samples were cut from each specimen and prepared for metallographic analysis. The microstructure of the ECAP-ed and as-received material was investigated using optical (OLYMPUS – BX60M) and SEM microscopy (TESCAN VEGA II – XMU). It was determined that for the as-received material the microstructure shows a rough appearance, with large grains of dendritic or seaweed aspect and with a secondary phase at grain boundaries (continuous casting structure). For the ECAP processed samples, the microstructure shows a finished aspect, with refined, elongated grains, also with crumbled and uniformly distributed second phase particles after a typical ECAP texture.

Impact of Diamond Grinding on Rigid Pavement Performance

2015 ◽  
Author(s):  
Syed Waqar Haider ◽  
Karim Chatti ◽  
Imen Zaabar ◽  
Ronell Joseph Eisma ◽  
Tyler Frederick
Keyword(s):  
Pavement Performance ◽  
Rigid Pavement ◽  
Diamond Grinding

Conditional Belief and the Ramsey Test

2002 ◽  
Vol 51 ◽  
pp. 215-232
Author(s):  
Scott Sturgeon
Keyword(s):  
Everyday Life ◽  
Common Sense ◽  
The Other ◽  
Coarse Grained ◽  
Degrees Of Belief ◽  
Conditional Belief ◽  
Ramsey Test ◽  
Fine Grained

Consider the frameS believes that—.Fill it with a conditional, sayIf you eat an Apple, you'll drink a Coke.what makes the result true? More generally, what facts are marked by instances ofS believes (A→C)?In a sense the answer is obious: beliefs are so marked. Yet that bromide leads directly to competing schools of thought. And the reason is simple.Common-sense thinks of belief two ways. Sometimes it sees it as a three-part affair. When so viewed either you believe, disbelieve, or suspend judgment. This take on belief is coarse-grained. It says belief has three flavours: acceptance, rejection, neither. But it's not the only way common-sense thinks of belief. Sometimes it's more subtle: ‘How strong is your faith?’ can be apposite between believers. That signals an important fact. Ordinary practice also treats belief as a fine-grained affair. It speaks of levels of confidence. It admits degrees of belief. It contains a fine-grained take as well. There are two ways belief is seen in everyday life. One is coarse-grained. The other is fine-grained.

Sign in / Sign up

Export Citation Format

Share Document