scholarly journals Clinical Profile and Cost of Treatment among Patients with Lymphedema in Philippine Heart Center from 2018-2020

2020 ◽  
Vol 29 (1) ◽  
pp. 14-18
Author(s):  
Bryan Rene F. Toledano ◽  
Catherine V. Sta Monica ◽  
Gertie May B. Plameras

PURPOSE This is a local study conducted that describes the clinical profile and cost incurred of patients with lymphedema among Filipinos seen in our institution. METHODS A descriptive study using the data from the Philippine Heart Center Lymphedema clinic from 2018-2020. It consists of the patient’s name, age, sex, lymphedema onset, classification, type, stage, affected site, treatment modality, and the number of sessions. The cost incurred was based on the clinic’s costing list, treatment modality, and the number of sessions rendered. RESULTS The analysis included a total of 97 patients. The mean age was 60.3 (± 14.3) years old, with female predominance (74.2% versus 25.8%). The majority is classified as secondary (91.8%) versus primary (8.2%). The classification of primary lymphedema are praecox (62.5%), congenital (25%) and tarda (12.5%) while for secondary it is cancer related (53.9%), phlebolymphedema (34.8%), lipolymphedema (3.4%), obesity induced 3.4%, trauma related, infection (3.4%) and iatrogenic (1.1). The stage of severity is stage IIA (60.8%), III (17.6%), IIB (13.4%), and I (8.2%). The most affected site is bilateral lower extremities (30%), followed by left (18.5%) and right (17.5%) lower extremities. The right and left upper extremities showed equal (16.5%) with no bilateral upper extremities affectation. The majority of treatment is unilateral (68.8%) versus bilateral (31.2%) decompressive lymphatic therapy. The total cost incurred was an average of P17,753 per patient and mostly came from the private section (89.7%) versus (10.3%). CONCLUSION Lymphedema is a chronic and recurrent disease that carries a substantial cost to patients. Its exact incidence, treatment outcomes, and quality of life among Filipinos are yet to be explored. A clinical profile will be the first step to raise awareness and to identify the different subset of populations for prevention, support, and treatment. Keywords Clinical profile, Cost of treatment, Lymphedema

2020 ◽  
Vol 13 (3) ◽  
pp. 289-293
Author(s):  
Bartosz J. Sapilak

Resistance to antibiotics is becoming a serious clinical problem. It increases the cost of treatment and is the reason for the failure of therapy. It cannot be eliminated, but the principles of prevention must be respected. First, do not prescribe chemotherapeutics in the therapy of viral infections and symptomatic treatment, after the second care to the selection of a sufficiently high dose, recommend regular intake of the drug and do not shorten the time of therapy. It is also important to choose the right active substance, which should be conditioned by the expected sensitivity of bacteria, the localization of inflammation and the age of the patient. Do not forget about the accompanying therapy, including the ordination of the probiotic and antifungal protection.


2018 ◽  
Vol 11 (1) ◽  
pp. e227112
Author(s):  
Benjamin Olano Sosa ◽  
Jean Anne Balajadia Toral

A 20-year-old primigravid experienced sudden stiffening of the neck, upper and lower extremities and trunk associated with joint pains. She was generally well before hospital admission with no history of attacks, except for her inflammatory bowel disease that was treated more than a year ago. During physical examination, the patient manifested neck flexion deviated to the right, deviation of the eyes downward and to the right, spooning of the upper extremities, exhibition of milkmaid’s grip, extension of both lower extremities and jerky speech. She also showed uncontrollable tremors of the neck and occasional flailing of upper extremities. Her preliminary laboratory tests were within normal range. It was worth noting here that her family’s medical history was unremarkable. In this article, the process of arriving at the final diagnosis and treatment would be discussed.


2017 ◽  
Vol 22 (2) ◽  
pp. 3-5
Author(s):  
James B. Talmage ◽  
Jay Blaisdell

Abstract Physicians use a variety of methodologies within the AMA Guides to the Evaluation of Permanent Impairment (AMA Guides), Sixth Edition, to rate nerve injuries depending on the type of injury and location of the nerve. Traumatic injuries that cause impairment to the peripheral or brachial plexus nerves are rated using Section 15.4e, Peripheral Nerve and Brachial Plexus Impairment, for upper extremities and Section 16.4c, Peripheral Nerve Rating Process, for lower extremities. Verifiable nerve lesions that incite the symptoms of complex regional pain syndrome, type II (similar to the former concept of causalgia), also are rated in these sections. Nerve entrapments, which are not isolated traumatic events, are rated using the methodology in Section 15.4f, Entrapment Neuropathy. Type I complex regional pain syndrome is rated using Section 15.5, Complex Regional Pain Syndrome for upper extremities or Section 16.5, Complex Regional Pain Syndrome for lower extremities. The method for grading the sensory and motor deficits is analogous to the method described in previous editions of AMA Guides. Rating the permanent impairment of the peripheral nerves or brachial plexus is similar to the methodology used in the diagnosis-based impairment scheme with the exceptions that the physical examination grade modifier is never used to adjust the default rating and the names of individual nerves or plexus trunks, as opposed to the names of diagnoses, appear in the far left column of the rating grids.


2018 ◽  
Vol 4 (2) ◽  
pp. 43-55
Author(s):  
Ika Yulianti ◽  
Endah Masrunik ◽  
Anam Miftakhul Huda ◽  
Diana Elvianita

This study aims to find a comparison of the calculation of the cost of goods manufactured in the CV. Mitra Setia Blitar uses the company's method and uses the Job Order Costing (JOC) method. The method used in this study is quantitative. The types of data used are quantitative and qualitative. Quantitative data is in the form of map production cost data while qualitative data is in the form of information about map production process. The result of calculating the cost of production of the map between the two methods results in a difference of Rp. 306. Calculation using the company method is more expensive than using the Job Order Costing method. Calculation of cost of goods manufactured using the company method is Rp. 2,205,000, - or Rp. 2,205, - each unit. While using the Job Order Costing (JOC) method is Rp. 1,899,000, - or Rp 1,899, - each unit. So that the right method used in calculating the cost of production is the Job Order Costing (JOC) method


2015 ◽  
Vol 43 (1) ◽  
pp. 147-176
Author(s):  
Andrew J Serpell

Payday loans are small-amount, short-term, unsecured, high-cost credit contracts provided by non-mainstream credit providers. Payday loans are usually taken out to help the consumer pay for essential items, such as food, rent, electricity, petrol, broken-down appliances or car registration or repairs. These consumers take out payday loans because they cannot — or believe that they cannot — obtain a loan from a mainstream credit provider such as a bank. In recent years there has been a protracted debate in Australia — and in several overseas jurisdictions — about how to regulate the industry. Recent amendments to the National Consumer Credit Protection Act 2009 (Cth) — referred to in this article as the 2013 reforms — are designed to better protect payday loan consumers. While the 2013 reforms provide substantially improved protection for payday loan consumers, further changes to the law may be warranted. This article raises several law reform issues which should be considered as part of the 2015 review into small amount credit contracts, including whether the caps on the cost of credit are set at the right level, whether the required content and presentation of the consumer warnings needs to be altered, whether more needs to be done to protect consumers who are particularly disadvantaged or vulnerable and whether a general anti-avoidance provision should be included in the credit legislation.


2020 ◽  
Vol 67 (1) ◽  
pp. 28-34
Author(s):  
Aleksandr V. Vinogradov ◽  
Aleksey V. Bukreev

When repairing and replacing electrical wiring in enterprises, the main difficulty is the lack or poor quality of documentation, plans for conductors laying. Distinguishing wires (cables) and their cores by the color of the shells or using tags attached to the ends is difficult if the shells have the same color and there are no tags. Devices and technical solutions used to identify wires and cables do not allow recognizing conductors without breaking the electrical circuit, removing insulation, and de-energizing the network. Searching for the right conductor is a time-consuming operation. (Research purpose) The research purpose is developing a new microcontroller device for identifying wires using an acoustic signal. (Materials and methods) Literature sources has been searched for devices for conductors identifying. (Results and discussion) The article proposes a method that involves feeding an acoustic signal to a wire at one point and capturing it at another, in order to recognize the desired wire. The article presents results of comparison of the developed microcontroller device for identifying conductors using an acoustic signal with known devices and methods for conductors recognizing. (Conclusions) The article reveals the shortcomings of existing methods and means of identifying wires and cables. Authors performed a theoretical calculation of the sound pressure in the conductor at a given distance. The article presents the calculation of speed of acoustic waves in conductors with different types of insulation. Authors designed a microcontroller device for identifying conductors using an acoustic signal and tested it. It was determined that the device increases the safety of work, reduces the cost of operating internal wiring and identification time; eliminates the violation of wire insulation, the need to disable electrical receivers. The convergence of theoretical calculations and experimental data was shown.


Games ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 23
Author(s):  
Alexander Arguchintsev ◽  
Vasilisa Poplevko

This paper deals with an optimal control problem for a linear system of first-order hyperbolic equations with a function on the right-hand side determined from controlled bilinear ordinary differential equations. These ordinary differential equations are linear with respect to state functions with controlled coefficients. Such problems arise in the simulation of some processes of chemical technology and population dynamics. Normally, general optimal control methods are used for these problems because of bilinear ordinary differential equations. In this paper, the problem is reduced to an optimal control problem for a system of ordinary differential equations. The reduction is based on non-classic exact increment formulas for the cost-functional. This treatment allows to use a number of efficient optimal control methods for the problem. An example illustrates the approach.


2021 ◽  
pp. 097275312199849
Author(s):  
Raghuram Nagarathna ◽  
M Madhava ◽  
Suchitra S Patil ◽  
Amit Singh ◽  
K. Perumal ◽  
...  

Background: Diabetes mellitus is a major noncommunicable disease. While mortality rates are increasing, the costs of managing the disease are also increasing. The all-India average monthly expenditure per person (pppm) is reported to be ₹ 1,098.25, which translates to an annual expenditure of ₹13,179 per person. Purpose: While a number of studies have gone into the aspect of the cost of disease management, we do not find any study which has pan-India reach. We also do not find studies that focus on differences (if any) between rural and urban areas, age or on the basis of gender. We planned to report the cost of illness (COI) in diabetes individuals as compared to others from the data of a pan-India trial. Methods: Government of India commissioned the Indian Yoga Association to study the prevalence of diabetes mellitus in India in 2017. As part of the questionnaire, the cost of treatment was also captured. Data collected from 25 states and union territories were analyzed using the analysis of covriance (ANCOVA) test on SPSS version 21. Results: There was a significant difference ( P < .05) between the average expenses per person per month (pppm) of individuals with self-reported known diabetes (₹1,357.65 pppm) and others (unknown and/or nondiabetes individuals–₹ 999.91 pppm). Similarly, there was a significant difference between rural (₹2,893 pppm) and urban (₹4,162 pppm) participants and between those below (₹1,996 pppm) and above 40 years (₹5,059 pppm) of age. Conclusion: This preliminary report has shown that the COI because of diabetes is significantly higher than others pointing to an urgent need to promote disease-preventive measures.


Informatics ◽  
2021 ◽  
Vol 8 (2) ◽  
pp. 30
Author(s):  
Mansoor Ahmed Soomro ◽  
Mohd Hizam-Hanafiah ◽  
Nor Liza Abdullah ◽  
Mohd Helmi Ali ◽  
Muhammad Shahar Jusoh

Industry 4.0 revolution, with its cutting-edge technologies, is an enabler for businesses, particularly in reducing the cost and improving the productivity. However, a large number of organizations are still too in their infancy to leverage the true potential of Industry 4.0 and its technologies. This paper takes a quantitative approach to reveal key insights from the companies that have implemented Industry 4.0 technologies. For this purpose, 238 technology companies in Malaysia were studied through a survey questionnaire. As technology companies are usually the first in line to adopt new technologies, they can be studied better as leaders in adopting the latest technologies. The findings of this descriptive study surfaced an array of insights in terms of Industry 4.0 readiness, Industry 4.0 technologies, leadership, strategy, and innovation. This research paper contributes by providing 10 key empirical insights on Industry 4.0 that can be utilized by managers to pace up their efforts towards digital transformation, and can help the policymakers in drafting the right policy to drive the digital revolution.


Sign in / Sign up

Export Citation Format

Share Document