The dominant frequency analysis of interfacial wave in wet-gas pipeline transportation based on NIR absorption

2021 ◽  
pp. 1-10
Author(s):  
Zhiyue Zhao ◽  
Ning Zhao ◽  
Lide Fang ◽  
Xiaoting Li
Keyword(s):  
Liquid Film ◽  
Predictive Accuracy ◽  
Film Surface ◽  
Dominant Frequency ◽  
Wave Frequency ◽  
Interfacial Wave ◽  
Long Distance ◽  
Wet Gas ◽  
The Mean ◽  
Predictive Correlation

During the long-distance transportation of wet-gas, the dominant frequency is of great significance for the study of pipeline fatigue and damage, and the safety production. Therefore, the theoretical and experimental researches for dominant frequency are carried out increasingly. However, most of the current prediction correlation of dominant frequency are mainly applicable to atmospheric pressure conditions (0.1 MPa), and the prediction accuracy is not accurate enough. The paper obtains the time series signal of liquid film thickness by near-infrared (NIR) sensor, and then calculates the wave frequency by the power spectrum density (PSD). The performance of typical predictive correlation is evaluated and analyzed by utilizing the experimental data at different flow and pressure conditions (0.1–0.8) MPa. The structure of Strouhal number and Lockhart-Martinelli (L-M) parameter are optimized reasonably, the mean velocity of the liquid film surface, the density increment of gas core, the gas core mass flow and average liquid film velocity are considered in the L-M parameter, a modified interfacial wave frequency correlation is proposed. The results indicate that the mean absolute error of the predictive correlation is 9.06% (current data) and 25.64% (literature data). The new correlation has a better predictive accuracy.

An Experimental Study on Liquid Film Dynamics and Interfacial Wave of Air-Water Two-Phase Flow in a Horizontal Channel

2013 ◽  
Author(s):  
Youjia Zhang ◽  
Weimin Ma ◽  
Shengjie Gong
Keyword(s):  
Liquid Film ◽  
Two Phase Flow ◽  
Rectangular Channel ◽  
Research Work ◽  
Water Film ◽  
Test Facility ◽  
Phase Flow ◽  
Interfacial Wave ◽  
Film Rupture ◽  
Two Phase

This study is concerned with liquid film dynamics and stability of annular flow, which plays an important role in understanding film rupture and dryout in boiling heat transfer. The research work starts from designing and making a test facility which enables the visualization and measurement of liquid film dynamics. A confocal optical sensor is applied to track the evolution of film thickness. A horizontal rectangular channel made of glass is used as the test section. Deionized water and air are supplied into that channel in such a way that an initial stratified flow forms, with the liquid film on the bottom wall. The present study is focused on characterization of liquid film profile and dynamics in term of interfacial wave and shear force induced film rupture under adiabatic condition. Based on the experimental data and analysis, it is found that given a constant water flowrate, the average thickness of water film decreases with increasing air flowrate, while the interfacial wave of the two-phase flow is intensified. As the air flowrate reaches a critical value, a localized rupture of the water film occurs.

scholarly journals Stress Fracture Influences Bone Resorption marker (u-NTX) in Female Long Distance Runners

2017 ◽  
Vol 38 (14) ◽  
pp. 1070-1075 ◽  
Author(s):  
Shimpei Fujita ◽  
Keishoku Sakuraba ◽  
Atsushi Kubota ◽  
Kenta Wakamatsu ◽  
Natsue Koikawa
Keyword(s):  
Bone Resorption ◽  
Stress Fracture ◽  
Premenopausal Women ◽  
Mean Value ◽  
Bone Resorption Marker ◽  
Distance Runners ◽  
Survey Period ◽  
Long Distance ◽  
Bone Resorption Markers ◽  
The Mean

AbstractIn this study, we aim to clarify the influence based on bone resorption markers at onset of stress fracture. Also, we will clarify the state of the bone resorption markers of female long distance runners who have a history of stress fracture and also ones who routinely practices running long distances. Participants comprised 19 female long distance athletes. The survey period was 2011–2014, and we measured u-NTX as a bone resorption marker at least twice a year, taking the mean±SD of the periodic measured values without stress fracture as the mean value. Measurements were collected sample when stress fractures developed. 132 u-NTX measurements were taken from 19 participants. As a result, the average was 41.03±12.31 nmolBCE/mmolCRE (Q1: 33.15, Q2: 40.55, Q3: 47.95). In six of the 19 participants, u-NTX could be measured following a stress fracture. The mean value of u-NTX for those participants was 40.16±9.10 nmolBCE/mmolCRE, increasing to 64.08±16.07 nmolBCE/mmol CRE with the stress fracture (p<0.01). The findings showed that, in adult female long distance runners, u-NTX values when there was no stress fracture were within the standard value for mean premenopausal women, but increased when the athletes suffered from a stress fracture.

On the drag-out problem in liquid film theory

2008 ◽  
Vol 617 ◽  
pp. 283-299 ◽  
Author(s):  
E. S. BENILOV ◽  
V. S. ZUBKOV
Keyword(s):  
Surface Tension ◽  
Liquid Film ◽  
Constant Velocity ◽  
Stokes Equations ◽  
Film Theory ◽  
Infinite Plate ◽  
Self Similar Solution ◽  
Self Similar ◽  
The Mean ◽  
Steady Solutions

We consider an infinite plate being withdrawn (at an angle α to the horizontal, with a constant velocity U) from an infinite pool of viscous liquid. Assuming that the effects of inertia and surface tension are weak, Derjaguin (C. R. Dokl. Acad. Sci. URSS, vol. 39, 1943, p. 13.) conjectured that the ‘load’ l, i.e. the thickness of the liquid film clinging to the plate, is l=(μU/ρgsinα)1/2, where ρ and μ are the liquid's density and viscosity, and g is the acceleration due to gravity.In the present work, the above formula is derived from the Stokes equations in the limit of small slopes of the plate (without this assumption, the formula is invalid). It is shown that the problem has infinitely many steady solutions, all of which are stable – but only one of these corresponds to Derjaguin's formula. This particular steady solution can only be singled out by matching it to a self-similar solution describing the non-steady part of the film between the pool and the film's ‘tip’.Even though the near-pool region where the steady state has been established expands with time, the upper, non-steady part of the film (with its thickness decreasing towards the tip) expands faster and, thus, occupies a larger portion of the plate. As a result, the mean thickness of the film is 1.5 times smaller than the load.

scholarly journals Assessment of Dietary Intake of Long-Distance Race Car Drivers—A Pilot Study

Sports ◽  
2018 ◽  
Vol 6 (4) ◽  
pp. 118
Author(s):  
Edem Appiah-Dwomoh ◽  
Anja Carlsohn ◽  
Frank Mayer
Keyword(s):  
Dietary Intake ◽  
Adult Population ◽  
Dietary Recommendations ◽  
Long Distance ◽  
Dietary Recall ◽  
Race Car ◽  
Race Car Drivers ◽  
The Mean ◽  
And Performance ◽  
Long Distance Race

Long-distance race car drivers are classified as athletes. The sport is physically and mentally demanding, requiring long hours of practice. Therefore, optimal dietary intake is essential for health and performance of the athlete. The aim of the study was to evaluate dietary intake and to compare the data with dietary recommendations for athletes and for the general adult population according to the German Nutrition Society (DGE). A 24-h dietary recall during a competition preparation phase was obtained from 16 male race car drivers (28.3 ± 6.1 years, body mass index (BMI) of 22.9 ± 2.3 kg/m2). The mean intake of energy, nutrients, water and alcohol was recorded. The mean energy, vitamin B2, vitamin E, folate, fiber, calcium, water and alcohol intake were 2124 ± 814 kcal/day, 1.3 ± 0.5 mg/day, 12.5 ± 9.5 mg/day, 231.0 ± 90.9 ug/day, 21.4 ± 9.4 g/day, 1104 ± 764 mg/day, 3309 ± 1522 mL/day and 0.8 ± 2.5 mL/day respectively. Our study indicated that many of the nutrients studied, including energy and carbohydrate, were below the recommended dietary intake for both athletes and the DGE.

scholarly journals The predictive accuracy of hypoxic scoring for prediction of adverse outcome in neonates born with asphyxia

2020 ◽  
Vol 7 (2) ◽  
pp. 333
Author(s):  
Muhammad Saqib ◽  
Safeer A. Jamil ◽  
Usman Arif ◽  
Zubda Anwar ◽  
Sarosh Waheed ◽  
...  
Keyword(s):  
Predictive Accuracy ◽  
Adverse Outcome ◽  
Birth Asphyxia ◽  
Major Contributor ◽  
Fetal Hypoxia ◽  
Negative Data ◽  
Term Infants ◽  
Study Objective ◽  
The Mean ◽  
Sensitivity Specificity

Background: Birth asphyxia is a major contributor to neonatal mortality. Fetal hypoxia followed by asphyxia is common cause of brain injury in term infants. Hypoxia score has shown to be accurate enough to predict adverse outcome in asphyxiated neonates. But controversies exist regarding predictive accuracy of hypoxia score. So we conducted this study. Objective to assess the predictive accuracy of hypoxic scoring for prediction of adverse outcome in neonates born with asphyxia.Methods: 170 neonates were screed for hypoxia score. Neonates were labelled as positive or negative. Then all neonates were followed-up for 7 days. If neonate died within 7days, then case was confirmed as positive or negative. Data was analysed by using SPSS 20. 2x2 table was developed to calculate sensitivity, specificity, PPV, NPV and predictive accuracy of hypoxia score.Results: The mean Apgar score at birth was 5.01±0.83. The sensitivity of hypoxia score was 87.8%, specificity was 90.9%, PPV was 90%, NPV was 88.9% while predictive accuracy was 89.4% taking actual adverse outcome as gold standard.Conclusions: The predictive accuracy of hypoxia score was high for prediction of adverse outcome in asphyxiated neonates.

scholarly journals A biochemical profile of cardiac involvement in perinatal asphyxia

2018 ◽  
Vol 5 (2) ◽  
pp. 328 ◽  
Author(s):  
Senthil Kumar P. ◽  
Durai Arasan G.
Keyword(s):  
Creatine Kinase ◽  
Cardiac Involvement ◽  
Predictive Accuracy ◽  
Perinatal Asphyxia ◽  
P Value ◽  
Perinatal Hypoxia ◽  
Specific Enzyme ◽  
Mortality And Morbidity ◽  
Significant Difference ◽  
The Mean

Background: Perinatal hypoxia is one of the leading causes of mortality and morbidity in developing countries like India, and even in developed countries. Perinatal hypoxia can result in Transient myocardial ischemia, tricuspid and mitral regurgitation, myocardial infarction, cardiac failure. The measurement of Creatine kinase -MB isoenzyme a cardiac specific enzyme helps in assessing the degree of myocardial involvement in asphyxiated infants.Methods: A Prospective case-control study was done in a Tertiary care centre serving rural areas predominantly, to determine the cardiac involvement by measuring serum MB isoenzyme of creatine kinase in perinatally asphyxiated inborn term babies for a period of six months.Results: There was a significant difference in the CK-MB values with regard to weight in both cases and controls. The mean CK-MB levels were higher in babies who had assisted delivery (forceps and breech) than those delivered by labour natural and LSCS. Mean CK-MB values of asphyxiated and controls were 133.8u/l and 27.12 u/l respectively with a p value of < 0.01. There was a significant difference between HIE1 and 3 with a p value of<0.02. Out of 60 cases 28 had abnormal ECG findings (46.6%). Statistically significant difference was found in the mean CK-MB between the normal and Grade4 ECG changes group. The overall predictive accuracy of CK-MB is high in Perinatal asphyxia (88%), Cardiac involvement (83%), Mortality (83%) and a moderate predictive accuracy for HIE (75%).Conclusions: Cardiac abnormalities in asphyxiated neonates are often underdiagnosed and requires high index of suspicion. Cardiac specific enzyme CK-MB helps in early recognition of myocardial damage and better management of cases, would reduce the neonatal mortality and morbidity. An expectant eye can be kept for complications in babies with markedly elevated CK-MB enzyme. 

Induction of voluntary prolonged running by rats

1987 ◽  
Vol 63 (6) ◽  
pp. 2549-2553 ◽  
Author(s):  
J. C. Russell ◽  
W. F. Epling ◽  
D. Pierce ◽  
R. M. Amy ◽  
D. P. Boer
Keyword(s):  
Physical Exercise ◽  
Food Supply ◽  
Initial Period ◽  
Physiological Effects ◽  
Long Distance ◽  
Fixed Amount ◽  
Long Distance Running ◽  
Old Rats ◽  
The Mean ◽  
Running Wheels

The rat is widely used in studies of the metabolic and physiological effects of physical exercise. The most commonly used form of exercise is running on treadmills or mechanically driven running wheels. Rats will not voluntarily run significant distances, under normal circumstances. If rats are exposed to running wheels with food freely available, only very limited activity normally occurs. When rats with access to a running wheel are restricted to a fixed amount of food, presented once per day, consistent running occurs. The running is spontaneous and very sensitive to the amount of food provided. Six 6-wk-old rats of 197 g mean body wt were induced to run for 139 days. The distance run increased rapidly over a 20-day initial period on a food supply of 15 g/day (vs. 19.5 g/day consumption by sedentary controls). From day 20 to day 139 the mean distance run was described by the regression equation distance (m/day) = 10,410 – 37.9 X days. Food provided was varied according to distance run, ranging from 15 to 18 g/day, and was normally 17.5 g/day. Thus a food deprivation of 10% of normal consumption will result in mean distances run of approximately 8,000 m/day. The use of pair-fed control animals without access to a wheel allows the conduct of experiments to test the effects of chronic long-distance running. The running is spontaneous; thus the technique avoids the complications accompanying techniques that force running.

Critical layers in accelerating two-layer flows

1988 ◽  
Vol 197 ◽  
pp. 429-451 ◽  
Author(s):  
Donald B. Altman
Keyword(s):  
Laboratory Experiments ◽  
Single Mode ◽  
Shear Instability ◽  
Mean Flow ◽  
Velocity Measurements ◽  
Interfacial Wave ◽  
Flow Acceleration ◽  
Critical Layers ◽  
The Mean ◽  
Processing Software

A series of laboratory experiments on accelerating two-layer shear flows over topography is described. The mean flow reverses at the interface of the layers, forcing a critical layer to occur there. It is found that for a sufficiently thin interface, a slowly growing recirculating region, the ‘acceleration rotor’, develops on the interfacial wave at mean-flow Richardson numbers of O(0.5). This, in turn, can induce a secondary dynamical shear instability on the trailing edge of the wave. A single-mode, linear, two-layer numerical model reproduces many features of the acceleration rotor if mean-flow acceleration and bottom forcing are included. Velocity measurements are obtained from photographs using image processing software developed for the automated reading of particle-streak photographs. Typical results are shown.

scholarly journals Impact of Wind Veer and the Coriolis Force for an Idealized Farm to Farm Interaction Case

2019 ◽  
Vol 9 (5) ◽  
pp. 922 ◽  
Author(s):  
Ola Eriksson ◽  
Simon-Philippe Breton ◽  
Karl Nilsson ◽  
Stefan Ivanell
Keyword(s):  
Coriolis Force ◽  
Wind Shear ◽  
Source Term ◽  
Wind Farms ◽  
Long Distance ◽  
Large Eddy ◽  
Relative Production ◽  
The Mean ◽  
The Right ◽  
The Impact

The impact of the Coriolis force on the long distance wake behind wind farms is investigated using Large Eddy Simulations (LES) combined with a Forced Boundary Layer (FBL) technique. When using the FBL technique any mean wind shear and turbulent fluctuations can be added with body forces. The wind shear can also include the mean wind veer due to the Coriolis force. The variation of the Coriolis force due to local deviations from the mean profile, e.g., from wakes, is not taken into account in the FBL. This can be corrected for with an extra source term in the equations, hereon defined as the Coriolis correction. For a row of 4 turbines it is shown that the inclusion of the wind veer turns the wake to the right, while including the Coriolis correction turns it to the left. When including both wind veer and Coriolis correction the impact of wind veer dominates. For an idealized farm to farm interaction case, two farms of 4 ∗ 4 turbines with 6 km in between, it can be seen that when including wind veer and the Coriolis correction a approximately 3% increase in the relative production for a full wake direction can be seen and only a slightly smaller increase can be seen when including only wind veer. The results indicate that FBL can be used for studies of long distance wakes without including a Coriolis correction but efforts need to be taken to use a wind shear with a correct mean wind veer.

Accuracy of predicting the vancomycin concentration in Japanese cancer patients by the Sawchuk–Zaske method or Bayesian method

2019 ◽  
Vol 26 (3) ◽  
pp. 543-548
Author(s):  
Toshihisa Nakashima ◽  
Takayuki Ohno ◽  
Keiichi Koido ◽  
Hironobu Hashimoto ◽  
Hiroyuki Terakado
Keyword(s):  
Cancer Patients ◽  
Prediction Error ◽  
Bayesian Method ◽  
Predictive Accuracy ◽  
Pharmacokinetic Parameters ◽  
Population Pharmacokinetic ◽  
Squared Prediction Error ◽  
Trough Concentrations ◽  
The Mean ◽  
Mean Prediction Error

Background In cancer patients treated with vancomycin, therapeutic drug monitoring is currently performed by the Bayesian method that involves estimating individual pharmacokinetics from population pharmacokinetic parameters and trough concentrations rather than the Sawchuk–Zaske method using peak and trough concentrations. Although the presence of malignancy influences the pharmacokinetic parameters of vancomycin, it is unclear whether cancer patients were included in the Japanese patient populations employed to estimate population pharmacokinetic parameters for this drug. The difference of predictive accuracy between the Sawchuk–Zaske and Bayesian methods in Japanese cancer patients is not completely understood. Objective To retrospectively compare the accuracy of predicting vancomycin concentrations between the Sawchuk–Zaske method and the Bayesian method in Japanese cancer patients. Methods Using data from 48 patients with various malignancies, the predictive accuracy (bias) and precision of the two methods were assessed by calculating the mean prediction error, the mean absolute prediction error, and the root mean squared prediction error. Results Prediction of the trough and peak vancomycin concentrations by the Sawchuk–Zaske method and the peak concentration by the Bayesian method showed a bias toward low values according to the mean prediction error. However, there were no significant differences between the two methods with regard to the changes of the mean prediction error, mean absolute prediction error, and root mean squared prediction error. Conclusion The Sawchuk–Zaske method and Bayesian method showed similar accuracy for predicting vancomycin concentrations in Japanese cancer patients.

Sign in / Sign up

Export Citation Format

Share Document