Effect of Exit Door Width on Flow Rate in  Occupant-based Fire Evacuation Scenarios in Dormitories

Student dormitories are intensely used buildings that meet the resting, accommodation and living needs of students. It is necessary to ensure the safety of students and to eliminate possible risks in dormitories as intensive use areas. Fires pose a great risk in dormitories and may cause serious casualties and injuries. The reduction of casualties and injuries can be achieved by analyzing occupant behaviour during fires according to the building use scenarios. In this paper, a type of dormitory that provides two alternative exits is explored. The building use scenarios of the dormitory were investigated by making on-site observations. Students’ use of sleeping units, dining units and partial sleeping/dining units and fire exit routes were determined. Pathfinder computer program was used to analyze the fire evacuation performance. This program was defined in accordance with occupant behaviour and different fire evacuation times were suggested depending on the building use scenarios. At the end of the study, based on the evacuation times, the flow rate at the exit doors according to the location of the occupants was analyzed. In the fire escape routes, as the upper floors are reached from the lower floors, the occupant flow rate decreases at the exit doors and the flow rates continue to be stable as the number of occupants is saturated according to the door width. The decrease in the number of occupants in the dining unit decreases the flow rate at the exit doors. It is important that various assembly units in dormitories, such as the dining unit, are designed on floors that can directly provide evacuation to a safe area. The results obtained are suitable for all dormitories, residences, hotels and other similar buildings. Keywords: building use scenario, dormitory, evacuation, flow rate, exit widths

Download Full-text

Appraisement Study on People Safety Evacuation in Large Scale Communal Building during Fire

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.864-867.782 ◽

2013 ◽

Vol 864-867 ◽

pp. 782-786

Author(s):

Qi Wei Liu

Keyword(s):

Markov Model ◽

Rational Design ◽

Large Scale ◽

Traffic Density ◽

Public Places ◽

Safe Area ◽

Fire Evacuation ◽

Exit Door ◽

Safety Evacuation

Fire danger degree of large public buildings is very high, difficulty to evacuation. Designed of fire evacuation is the most important factor when the safety degree of a large scale communal building is evaluated. Based on probabilistic analysis method - Markov model to predict public building fire evacuation rational design. Taking a large public places fire safety evacuation example case study, the results showed that: Markov model can scientifically and accurately, effectively predict extreme cases limited time traffic density, and each exit door emergency escape set a minimum flow of people. To ensure that the fire occurred within the time allowed people to evacuate to a safe area provides a theoretical basis.

Download Full-text

Hydraulic model of a water cooling system in a chemical plant

Collection of Czechoslovak Chemical Communications ◽

10.1135/cccc19880788 ◽

1988 ◽

Vol 53 (4) ◽

pp. 788-806

Author(s):

Miloslav Hošťálek ◽

Jiří Výborný ◽

František Madron

Keyword(s):

Flow Rate ◽

Cooling System ◽

Cooling Water ◽

Graph Algorithm ◽

Automatic Generation ◽

Hydraulic Calculation ◽

Return Flow ◽

Flow Rates ◽

Pressure Losses ◽

Controlled Flow

Steady state hydraulic calculation has been described of an extensive pipeline network based on a new graph algorithm for setting up and decomposition of balance equations of the model. The parameters of the model are characteristics of individual sections of the network (pumps, pipes, and heat exchangers with armatures). In case of sections with controlled flow rate (variable characteristic), or sections with measured flow rate, the flow rates are direct inputs. The interactions of the network with the surroundings are accounted for by appropriate sources and sinks of individual nodes. The result of the calculation is the knowledge of all flow rates and pressure losses in the network. Automatic generation of the model equations utilizes an efficient (vector) fixing of the network topology and predominantly logical, not numerical operations based on the graph theory. The calculation proper utilizes a modification of the model by the method of linearization of characteristics, while the properties of the modified set of equations permit further decrease of the requirements on the computer. The described approach is suitable for the solution of practical problems even on lower category personal computers. The calculations are illustrated on an example of a simple network with uncontrolled and controlled flow rates of cooling water while one of the sections of the network is also a gravitational return flow of the cooling water.

Download Full-text

Geometrical Optimization of a Venturi-Type Microbubble Generator Using CFD Simulation and Experimental Measurements

Designs ◽

10.3390/designs5010004 ◽

2021 ◽

Vol 5 (1) ◽

pp. 4

Author(s):

Dillon Alexander Wilson ◽

Kul Pun ◽

Poo Balan Ganesan ◽

Faik Hamad

Keyword(s):

Water Flow ◽

Flow Rate ◽

Cfd Simulation ◽

Air Flow ◽

Bubble Diameter ◽

Diameter Ratio ◽

Experimental Measurements ◽

Cfd Model ◽

Flow Rates ◽

Throat Diameter

Microbubble generators are of considerable importance to a range of scientific fields from use in aquaculture and engineering to medical applications. This is due to the fact the amount of sea life in the water is proportional to the amount of oxygen in it. In this paper, experimental measurements and computational Fluid Dynamics (CFD) simulation are performed for three water flow rates and three with three different air flow rates. The experimental data presented in the paper are used to validate the CFD model. Then, the CFD model is used to study the effect of diverging angle and throat length/throat diameter ratio on the size of the microbubble produced by the Venturi-type microbubble generator. The experimental results showed that increasing water flow rate and reducing the air flow rate produces smaller microbubbles. The prediction from the CFD results indicated that throat length/throat diameter ratio and diffuser divergent angle have a small effect on bubble diameter distribution and average bubble diameter for the range of the throat water velocities used in this study.

Download Full-text

Comparison of different models to calculate the viscosity of biogas and biomethane in order to accurately measure flow rates for conformity assessment

Scientific Reports ◽

10.1038/s41598-021-81052-7 ◽

2021 ◽

Vol 11 (1) ◽

Author(s):

Karine Arrhenius ◽

Oliver Büker

Keyword(s):

Binary Mixtures ◽

Flow Rate ◽

Correction Method ◽

Gas Mixtures ◽

Conformity Assessment ◽

Flow Rates ◽

Unknown Composition

AbstractThe study presents an optimised method to correct flow rates measured with a LFE flowmeter pre-set on methane while used for gas mixtures of unknown composition at the time of the measurement. The method requires the correction of the flow rate using a factor based on the viscosity of the gas mixtures once the composition is accurately known. The method has several different possible applications inclusive for the sampling of biogas and biomethane onto sorbent tubes for conformity assessment for the determination of siloxanes, terpenes and VOC in general. Five models for the calculation of the viscosity of the gas mixtures were compared and the models were used for ten binary mixtures and four multi-component mixtures. The results of the evaluation of the different models showed that the correction method using the viscosity of the mixtures calculated with the model of Reichenberg and Carr showed the smallest biases for binary mixtures. For multi-component mixtures, the best results were obtained when using the models of Lucas and Carr.

Download Full-text

Assessment of the Use of Humidified Nasal Cannulas for Oxygen Therapy in Patients with Epistaxis

ORL ◽

10.1159/000514460 ◽

2021 ◽

pp. 1-5

Author(s):

Jingjing Liu ◽

Tengfang Chen ◽

Zhenggang Lv ◽

Dezhong Wu

Keyword(s):

Flow Rate ◽

Oxygen Therapy ◽

Preliminary Investigation ◽

Nasal Cannula ◽

Low Flow ◽

Antiplatelet Drugs ◽

Flow Rates ◽

The Past ◽

Oxygen Inhalation ◽

Significant Difference

Introduction: In China, nasal cannula oxygen therapy is typically humidified. However, it is difficult to decide whether to suspend nasal cannula oxygen inhalation after the nosebleed has temporarily stopped. Therefore, we conducted a preliminary investigation on whether the use of humidified nasal cannulas in our hospital increases the incidence of epistaxis. Methods: We conducted a survey of 176,058 inpatients in our hospital and other city branches of our hospital over the past 3 years and obtained information concerning their use of humidified nasal cannulas for oxygen inhalation, nonhumidified nasal cannulas, anticoagulant and antiplatelet drugs, and oxygen inhalation flow rates. This information was compared with the data collected at consultation for epistaxis during these 3 years. Results: No significant difference was found between inpatients with humidified nasal cannulas and those without nasal cannula oxygen therapy in the incidence of consultations due to epistaxis (χ2 = 1.007, p > 0.05). The same trend was observed among hospitalized patients using anticoagulant and antiplatelet drugs (χ2 = 2.082, p > 0.05). Among the patients with an inhaled oxygen flow rate ≥5 L/min, the incidence of ear-nose-throat (ENT) consultations due to epistaxis was 0. No statistically significant difference was found between inpatients with a humidified oxygen inhalation flow rate <5 L/min and those without nasal cannula oxygen therapy in the incidence of ENT consultations due to epistaxis (χ2 = 0.838, p > 0.05). A statistically significant difference was observed in the incidence of ENT consultations due to epistaxis between the low-flow nonhumidified nasal cannula and nonnasal cannula oxygen inhalation groups (χ2 = 18.428, p < 0.001). The same trend was observed between the 2 groups of low-flow humidified and low-flow nonhumidified nasal cannula oxygen inhalation (χ2 = 26.194, p < 0.001). Discussion/Conclusion: Neither high-flow humidified nasal cannula oxygen inhalation nor low-flow humidified nasal cannula oxygen inhalation will increase the incidence of recurrent or serious epistaxis complications; the same trend was observed for patients who use anticoagulant and antiplatelet drugs. Humidification during low-flow nasal cannula oxygen inhalation can prevent severe and repeated epistaxis to a certain extent.

Download Full-text

Net-exergetic, hydraulic and thermal optimization of coaxial heat exchangers using fixed flow conditions instead of fixed flow rates

Geothermal Energy ◽

10.1186/s40517-021-00201-3 ◽

2021 ◽

Vol 9 (1) ◽

Author(s):

Tobias Blanke ◽

Markus Hagenkamp ◽

Bernd Döring ◽

Joachim Göttsche ◽

Vitali Reger ◽

...

Keyword(s):

Reynolds Number ◽

Laminar Flow ◽

Mass Flow ◽

Flow Rate ◽

Heat Exchangers ◽

Circular Ring ◽

Flow Conditions ◽

Flow Rates ◽

Mass Flow Rates ◽

Pipe Radius

AbstractPrevious studies optimized the dimensions of coaxial heat exchangers using constant mass flow rates as a boundary condition. They show a thermal optimal circular ring width of nearly zero. Hydraulically optimal is an inner to outer pipe radius ratio of 0.65 for turbulent and 0.68 for laminar flow types. In contrast, in this study, flow conditions in the circular ring are kept constant (a set of fixed Reynolds numbers) during optimization. This approach ensures fixed flow conditions and prevents inappropriately high or low mass flow rates. The optimization is carried out for three objectives: Maximum energy gain, minimum hydraulic effort and eventually optimum net-exergy balance. The optimization changes the inner pipe radius and mass flow rate but not the Reynolds number of the circular ring. The thermal calculations base on Hellström’s borehole resistance and the hydraulic optimization on individually calculated linear loss of head coefficients. Increasing the inner pipe radius results in decreased hydraulic losses in the inner pipe but increased losses in the circular ring. The net-exergy difference is a key performance indicator and combines thermal and hydraulic calculations. It is the difference between thermal exergy flux and hydraulic effort. The Reynolds number in the circular ring is instead of the mass flow rate constant during all optimizations. The result from a thermal perspective is an optimal width of the circular ring of nearly zero. The hydraulically optimal inner pipe radius is 54% of the outer pipe radius for laminar flow and 60% for turbulent flow scenarios. Net-exergetic optimization shows a predominant influence of hydraulic losses, especially for small temperature gains. The exact result depends on the earth’s thermal properties and the flow type. Conclusively, coaxial geothermal probes’ design should focus on the hydraulic optimum and take the thermal optimum as a secondary criterion due to the dominating hydraulics.

Download Full-text

Effects of Sprinkler Flow Rate on Physiological, Behavioral and Production Responses of Nili Ravi Buffaloes during Subtropical Summer

Animals ◽

10.3390/ani11020339 ◽

2021 ◽

Vol 11 (2) ◽

pp. 339

Author(s):

Musa Bah ◽

Muhammad Afzal Rashid ◽

Khalid Javed ◽

Talat Naseer Pasha ◽

Muhammad Qamer Shahid

Keyword(s):

Heat Stress ◽

Milk Yield ◽

Flow Rate ◽

Rectal Temperature ◽

Latin Square ◽

Flow Rates ◽

Group Water ◽

Humidity Index ◽

Daily Milk Yield ◽

Daily Milk

Water buffaloes wallow in water to combat heat stress during summer. With the decreasing reservoirs for wallowing, the farmers use sprinklers to cool the buffaloes in Pakistan. These sprinklers use a large quantity of groundwater, which is becoming scarce. The objective of the current study was to determine the effect of different sprinkler flow rates on the physiological, behavioral, and production responses of Nili Ravi buffaloes during summer. Eighteen buffaloes were randomly subjected to three sprinkler flow rate treatments in a double replicated 3 × 3 Latin square design. The flow rates were 0.8, 1.25, and 2.0 L/min. During the study, the average afternoon temperature humidity index was 84.6. The 1.25 and 2.0 L/min groups had significantly lower rectal temperature and respiratory rates than the 0.8 L/min group. Water intake was significantly higher in the 0.8 L/min group. Daily milk yield was higher in the 1.25 and 2.0 L/min groups than in the 0.8 L/min group. These results suggested that the sprinkler flow rates > 0.8 L/min effectively cooled the buffaloes. The sprinkler flow rate of 1.25 L/min appeared to be more efficient, as it used 37.5% less water compared to the 2.0 L/min.

Download Full-text

Laser-Doppler Velocimetry Measurements Inside a Backward Curved Centrifugal Fan

International Journal of Rotating Machinery ◽

10.1155/s1023621x01000161 ◽

2001 ◽

Vol 7 (3) ◽

pp. 173-181

Author(s):

Tong-Miin Liou ◽

Meng-Yu Chen

Keyword(s):

Flow Rate ◽

Turbulence Intensity ◽

Laser Doppler Velocimetry ◽

Reverse Flow ◽

Flow Region ◽

Design Flow ◽

Laser Doppler ◽

Centrifugal Fan ◽

Doppler Velocimetry ◽

Flow Rates

Laser-Doppler velocimetry (LDV) measurements are presented of relative mean velocity and turbulence intensity components inside the impeller passage of a centrifugal fan with twelve backward curved blades at design, under-design, and over-design flow rates. Additional LDV measurements were also performed at the volute outlet to examine the uniformity of the outlet flow for the three selected flow rates. Complementary flow visualization results in the tongue region are further presented. It is found that the number of characteristic flow regions and the average turbulence level increase with decreasing air flow rate. For the case of under-design flow rate, there are a through-flow region on the suction side, a reverse flow region on the pressure side, and a shear layer region in between. The corresponding average turbulence intensity is as high as 9.1% of blade tip velocity.

Download Full-text

Simultaneous Measuring Method for Both Volumetric Flow Rates of Air-Water Mixture Using a Turbine Flowmeter

Journal of Energy Resources Technology ◽

10.1115/1.2792689 ◽

1996 ◽

Vol 118 (1) ◽

pp. 29-35 ◽

Cited By ~ 9

Author(s):

K. Minemura ◽

K. Egashira ◽

K. Ihara ◽

H. Furuta ◽

K. Yamamoto

Keyword(s):

Pressure Drop ◽

Flow Rate ◽

Volumetric Flow Rate ◽

Oil Field ◽

Liquid Density ◽

Water Mixture ◽

Rotor Speed ◽

Flow Rates ◽

Field Development ◽

Turbine Flowmeter

A turbine flowmeter is employed in this study in connection with offshore oil field development, in order to measure simultaneously both the volumetric flow rates of air-water two-phase mixture. Though a conventional turbine flowmeter is generally used to measure the single-phase volumetric flow rate by obtaining the rotational rotor speed, the method proposed additionally reads the pressure drop across the meter. After the pressure drop and rotor speed measured are correlated as functions of the volumetric flow ratio of the air to the whole fluid and the total volumetric flow rate, both the flow rates are iteratively evaluated with the functions on the premise that the liquid density is known. The evaluated flow rates are confirmed to have adequate accuracy, and thus the applicability of the method to oil fields.

Download Full-text

Pharmacokinetics and dialytic clearance of apixaban during in vitro continuous renal replacement therapy

BMC Nephrology ◽

10.1186/s12882-021-02248-7 ◽

2021 ◽

Vol 22 (1) ◽

Author(s):

Lauren Andrews ◽

Scott Benken ◽

Xing Tan ◽

Eric Wenzler

Keyword(s):

Renal Replacement Therapy ◽

Linear Regression ◽

Protein Binding ◽

Continuous Renal Replacement Therapy ◽

Replacement Therapy ◽

Flow Rate ◽

Systemic Exposure ◽

Flow Rates ◽

Filter Type

Abstract Background To evaluate the transmembrane clearance (CLTM) of apixaban during modeled in vitro continuous renal replacement therapy (CRRT), assess protein binding and circuit adsorption, and provide initial dosing recommendations. Methods Apixaban was added to the CRRT circuit and serial pre-filter bovine blood samples were collected along with post-filter blood and effluent samples. All experiments were performed in duplicate using continuous veno-venous hemofiltration (CVVH) and hemodialysis (CVVHD) modes, with varying filter types, flow rates, and point of CVVH replacement fluid dilution. Concentrations of apixaban and urea were quantified via liquid chromatography-tandem mass spectrometry. Plasma pharmacokinetic parameters for apixaban were estimated via noncompartmental analysis. CLTM was calculated via the estimated area under the curve (AUC) and by the product of the sieving/saturation coefficient (SC/SA) and flow rate. Two and three-way analysis of variance (ANOVA) models were built to assess the effects of mode, filter type, flow rate, and point of dilution on CLTM by each method. Optimal doses were suggested by matching the AUC observed in vitro to the systemic exposure demonstrated in Phase 2/3 studies of apixaban. Linear regression was utilized to provide dosing estimations for flow rates from 0.5–5 L/h. Results Mean adsorption to the HF1400 and M150 filters differed significantly at 38 and 13%, respectively, while mean (± standard deviation, SD) percent protein binding was 70.81 ± 0.01%. Effect of CVVH point of dilution did not differ across filter types, although CLTM was consistently significantly higher during CRRT with the HF1400 filter compared to the M150. The three-way ANOVA demonstrated improved fit when CLTM values calculated by AUC were used (adjusted R2 0.87 vs. 0.52), and therefore, these values were used to generate optimal dosing recommendations. Linear regression revealed significant effects of filter type and flow rate on CLTM by AUC, suggesting doses of 2.5–7.5 mg twice daily (BID) may be needed for flow rates ranging from 0.5–5 L/h, respectively. Conclusion For CRRT flow rates most commonly employed in clinical practice, the standard labeled 5 mg BID dose of apixaban is predicted to achieve target systemic exposure thresholds. The safety and efficacy of these proposed dosing regimens warrants further investigation in clinical studies.

Download Full-text