scholarly journals Optimizing process parameters to improve the compressive strength of FDM products (Fused Deposition Modeling)

2017 ◽  
Vol 20 (K5) ◽  
pp. 37-43
Author(s):  
Nghi Huu Huynh ◽  
Ton Minh Tran ◽  
Tho Huu Nguyen ◽  
Ha Thi Thu Thai
Keyword(s):  
Compressive Strength ◽  
3D Printing ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Industrial Revolution ◽  
Optimum Process ◽  
Modeling Technology ◽  
Fused Deposition ◽  
Raster Angle ◽  
Deposition Modeling

Nowadays, 3D Printing Technology, also known as AM - Additive Manufacturing plays an important role in the 4.0 industrial revolution. In 3D printing technologies, FDM (Fused Deposition Modeling) technology is the most popular technology. In general, the quality of AM products and FDM depend on the process parameters. The article addressed the issue of optimizing process parameters to improve the compressive strength of the product. The parameters are considered as the fill pattern, fill density, number of contours, layer thickness and raster angle. The experimental design based on the Taguchi method is employed to identify the optimum process parameters. In addition, ANOVA is also utilized to evaluate the effect of each parameter on the compressive strength of the product.

Multiresponse Optimization of Fused Deposition Modeling Process Using Utility-Based Taguchi Approach

2018 ◽  
Vol 17 (04) ◽  
pp. 551-568 ◽  
Author(s):  
Saurabh Verma ◽  
Vedansh Chaturvedi
Keyword(s):  
Layer Thickness ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Optimum Process ◽  
Utility Concept ◽  
Fused Deposition ◽  
Multiresponse Optimization ◽  
Raster Angle ◽  
Deposition Modeling ◽  
Part Orientation

Rapid Prototyping (RP) technology has become the powerful tool for product development in almost every branch of engineering. Many new and upcoming processes offer means for the fast creation of models with steadily increasing accuracy, built speed, other model properties and economic advantages. Fused Deposition Modeling (FDM) is the most famous and commercially available RP system. This paper presents the application of Utility concept with Taguchi method for multiresponse optimization of the FDM process. Stratatys Fortus 400[Formula: see text]mc FDM setup is used to conduct experiments as per Taguchi’s L9 orthogonal array. FDM parameters: Layer thickness, part orientation and raster angle were optimized based on multiple responses, i.e. tensile, flexural, impact and compressive strength. The optimum process parameters are calculated using utility concept. The Analysis of variance (ANOVA) is applied to find out the most significant factor. It has been found that layer thickness is the most significant factor, followed by part orientation and raster angle. The confirmation tests with optimal levels of process parameters are conducted to illustrate the efficacy of the proposed method. It is found that optimum combination of process parameters gives the highest utility value, which indicates that multiresponses of the FDM process can be improved through this approach.

scholarly journals Development and Accuracy Test of a Fused Deposition Modeling (FDM) 3D Printing using H-Bot Mechanism

2021 ◽  
Vol 3 (1) ◽  
pp. 46-53
Author(s):  
Budi Hadisujoto ◽  
Robby Wijaya
Keyword(s):  
3D Printing ◽  
Manufacturing Process ◽  
Fused Deposition Modeling ◽  
Industrial Revolution ◽  
3D Printer ◽  
Initial Development ◽  
Fused Deposition ◽  
Accuracy Test ◽  
Custom Made ◽  
Deposition Modeling

Additive manufacturing process known as the 3D printing process is an advanced manufacturing process including one of the components to support industrial revolution 4.0. The initial development of a 3D printing machine at Sampoerna University is the background of this research. The 3D printing setup of Fused Deposition Modeling (FDM) was built using H-bot moving mechanism by considering the rigidity aspect. The FDM printing method is selected due to its cost and reliability. In this early development, the brackets were custom made using a 3D printer with Polylactic Acid (PLA) material. The result showed that the software worked properly in accordance with the assembled mechanical and electrical parts. The 3D printer could print simple objects such as planes and cubes with small dimensions. However, the printing specimen still lacked accuracy caused by the less rigidity of linear rail brackets, less coplanar belt arrangement, and error in some electronic components.

Morphological evaluation of microcellular foamed composites developed through gas batch foaming integrating Fused Deposition Modeling (FDM) 3D printing technique

2021 ◽  
pp. 026248932110409
Author(s):  
G Radhakrishna ◽  
Rupesh Dugad ◽  
Abhishek Gandhi
Keyword(s):  
3D Printing ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Saturation Pressure ◽  
Average Cell ◽  
Fused Deposition ◽  
Printing Technique ◽  
Deposition Modeling ◽  
3D Printing Technique ◽  
Batch Foaming

In this article, the development of microcellular structure foams has developed by integrating the two successful and existing technologies, namely CO2 gas batch foaming and Fused Deposition Modeling (FDM) 3D printing technique. It is a novel approach to manufacture complex design porous products for customized applications. The eventual cell morphologies of the extruded 3D printing filament depends on the process parameters pertaining to both microcellular foaming and 3D printing processes. Further, morphological study has been conducted to evaluate the cell morphologies of the 3D printing filament developed through customized FDM setup. During this process, the significance of various process parameters including saturation pressure, saturation time, desorption time, feed rate and extrusion temperature were thoroughly studied. To pursue this study base material used was acrylonitrile butadiene styrene (ABS). The 3D printed filaments consisted of cells with an average cell size in the range of 2.3–276 µm and the average cell density in the range of 4.7 × 104 to 4.3 × 109 cells/cm3. Finally, it has found that by controlling the process parameters different cell morphologies can be developed as per the end application.

Improvement in Tensile Strength of FDM Built Parts by Parametric Control

2014 ◽  
Vol 592-594 ◽  
pp. 1075-1079 ◽  
Author(s):  
Swayam Bikash Mishra ◽  
Siba Sankar Mahapatra
Keyword(s):  
Tensile Strength ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Optimal Parameter ◽  
Layer By Layer ◽  
3D Objects ◽  
Fused Deposition ◽  
Solid Models ◽  
Raster Angle ◽  
Deposition Modeling

Fused Deposition Modeling (FDM) is one of the efficient rapid prototyping (RP) technologies that forms 3D objects by adding material layer by layer from CAD generated solid models. However, the FDM built part is hardly anisotropic in nature due to layer-by-layer build mechanism. Literature suggests that mechanical property, especially tensile strength, of FDM built part is severely affected by process parameters. Among all the parameters, contour number happens to be an important parameter because it reduces stress concentration resulting in avoidance of premature breakdown. Therefore, in this work contour number along with five important process parameters such as layer thickness, raster width, part orientation, raster angle and air gap are considered and their effect on tensile strength of FDM built parts is studied. Experiments are conducted using Face Centred Central Composite Design (FCCCD) in order to reduce the experimental runs. An optimal parameter setting has been suggested for the maximisation of tensile strength of the FDM built parts.

scholarly journals Design of ABS Plastic Components through FDM Process for the Quick Replacement of Outworn Parts in a Technological Flow

2018 ◽  
Vol 55 (2) ◽  
pp. 211-214
Author(s):  
Nicoleta Elisabeta Pascu ◽  
Tiberiu Gabriel Dobrescu ◽  
Emilia Balan ◽  
Gabriel Jiga ◽  
Victor Adir
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Spare Parts ◽  
Work Piece ◽  
Modeling Technology ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Plastic Components ◽  
Plastic Parts

The paper shows the importance of designing an ABS (Acrylonitrile-Butadiene-Styrene) plastic part which will be produced using FDM (Fused Deposition Modeling) technology; it is obtained a product with the same characteristics provided by the operating guide book. Thus, this solution combines both the capacity of the designer as well as the applied technology and can produce similar or improved plastic components, at the same time maintaining the functional characteristics of the work piece. This paper is a plea for the application of 3D printing using FDM technology for manufacturing components (spare parts) out of production, because the technological systems users no longer have other solutions available for replacing outworn plastic parts. 3D printing using FDM technology is a fast option for replacing outworn components, the modeling, simulation and printing time being shorter than the purchase time of a new subassembly or assembly that has been remanufactured and modernized.

OPTIMIZATION OF PROCESS PARAMETERS IN FUSED DEPOSITION MODELING USING WEIGHTED PRINCIPAL COMPONENT ANALYSIS

2011 ◽  
Vol 10 (02) ◽  
pp. 241-259 ◽  
Author(s):  
ANOOP KUMAR SOOD ◽  
VEDANSH CHATURVEDI ◽  
SAURAV DATTA ◽  
SIBA SANKAR MAHAPATRA
Keyword(s):  
Principal Component Analysis ◽  
Layer Thickness ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Principal Component ◽  
Air Gap ◽  
Fused Deposition ◽  
Raster Angle ◽  
Deposition Modeling ◽  
Single Response

Fused deposition modeling (FDM) is a process by which functional parts can be produced rapidly through deposition of fused layers of material according to a numerically defined cross-sectional geometry. Literature suggests that process parameters largely influence on quality characteristics of rapid prototyping (RP) parts. A functional part is subjected to different loading conditions in actual practice. Therefore, process parameters need to be determined in such a way that they collectively optimize more than one response simultaneously. To address this issue, effect of important process parameters viz., layer thickness, orientation, raster angle, raster width, and air gap have been studied. The responses considered in this study are mechanical property of FDM produced parts such as tensile, bending and impact strength. The multiple responses are converted into a single response using principal component analysis (PCA) so that influence of correlation among the responses can be eliminated. Resulting single response is nothing but the weighted sum of three principal components that explain almost hundred percent of variation. The experiments have been conducted in accordance with Taguchi's orthogonal array to reduce the experimental runs. The results indicate that all the factors such as layer thickness, orientation, raster angle, raster width and air gap and interaction between layer thickness and orientation significantly influence the response. Optimum parameter settings have been identified to simultaneously optimize three responses. The mechanism of failure is explained with the help of SEM micrographs.

Effect of 3D Printing Parameters on the Tensile Strength of Products

2020 ◽  
Vol 863 ◽  
pp. 103-108
Author(s):  
Tran Anh Son ◽  
Pham Son Minh ◽  
Trung Do Thanh
Keyword(s):  
3D Printing ◽  
Tensile Properties ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Full Factorial Experimental Design ◽  
Full Factorial ◽  
3D Printing Technique ◽  
Printing Parameters

3D printing is a promising digital manufacturing technique that manufactures product parts in a layer fashion. Fused deposition modeling (FDM) is a widely used 3D printing technique that produces components by heating, extruding, and depositing the filaments of thermoplastic polymers. Meanwhile, the properties of FDM-produced parts are significantly influenced by process parameters. These process parameters have different advantages that need to be investigated. This paper examines the effect of some process parameters on the tensile properties of some components produced using FDM technique. The study is performed on polylactic acid (PLA) material, using full factorial experimental design. Furthermore, three process parameter—material, infill density, and infill pattern—are considered. The results indicate that only the infill pattern significantly influences the tensile properties of the model.

Effect of process parameters of fused deposition modeling on mechanical properties of poly-ether-ether-ketone and carbon fiber/poly-ether-ether-ketone

2022 ◽  
pp. 095400832110673
Author(s):  
Pei Wang ◽  
Aigang Pan ◽  
Liu Xia ◽  
Yitao Cao ◽  
Hongjie Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Fused Deposition ◽  
Ether Ether Ketone ◽  
Poly Ether Ether Ketone ◽  
Raster Angle ◽  
Deposition Modeling ◽  
Ether Ketone ◽  
Nozzle Temperature

As a rapidly developing additive manufacturing technology, fused deposition modeling (FDM) has become widespread in many industry fields. It can fabricate complicated geometries using filament of thermoplastic materials such as PP, polylactic acid, acrylonitrile butadiene styrene, etc. However, poor mechanical properties of raw materials limit their application. Poly-ether-ether-ketone is a type of special engineering plastic with high performance, which could be further reinforced by adding carbon fibers (CFs). During FDM process, the mechanical properties of printed parts are largely subject to careful selection of process parameters. To improve the mechanical properties of PEEK and CF/PEEK 3D-printed parts, the effects of various process parameters including building orientation, raster angle, nozzle temperature, platform temperature, ambient temperature, printing speed, layer thickness, infill density, and number of printed parts on mechanical properties were investigated. The tensile fracture interfaces of printed parts were observed by scanning electron microscope (SEM) to explain the influence mechanism of process parameters. In the single factor experiments, flat and on-edge specimens show the best tensile and flexural strength, respectively; the specimens with raster angle ±45° and 0° show the best tensile and flexural strength, respectively. When the nozzle temperature at 500°C, platform temperature at 200°C, ambient temperature at 150°C, printing speed is 20 mm/s, layer thickness is 0.2 mm, and infill density is 100%, the printed parts exhibit the best mechanical properties.

Biodegradable 3D Printed Polymer Microneedles for Transdermal Drug Delivery

2018 ◽  
Author(s):  
Michael A. Luzuriaga ◽  
Danielle R. Berry ◽  
John C. Reagan ◽  
Ronald A. Smaldone ◽  
Jeremiah J. Gassensmith
Keyword(s):  
Drug Delivery ◽  
3D Printing ◽  
Transdermal Drug Delivery ◽  
Fused Deposition Modeling ◽  
Fused Deposition ◽  
Modeling Software ◽  
Deposition Modeling ◽  
3D Printed ◽  
Microfabrication Technique ◽  
Mechanical Strengths

Biodegradable polymer microneedle (MN) arrays are an emerging class of transdermal drug delivery devices that promise a painless and sanitary alternative to syringes; however, prototyping bespoke needle architectures is expensive and requires production of new master templates. Here, we present a new microfabrication technique for MNs using fused deposition modeling (FDM) 3D printing using polylactic acid, an FDA approved, renewable, biodegradable, thermoplastic material. We show how this natural degradability can be exploited to overcome a key challenge of FDM 3D printing, in particular the low resolution of these printers. We improved the feature size of the printed parts significantly by developing a post fabrication chemical etching protocol, which allowed us to access tip sizes as small as 1 μm. With 3D modeling software, various MN shapes were designed and printed rapidly with custom needle density, length, and shape. Scanning electron microscopy confirmed that our method resulted in needle tip sizes in the range of 1 – 55 µm, which could successfully penetrate and break off into porcine skin. We have also shown that these MNs have comparable mechanical strengths to currently fabricated MNs and we further demonstrated how the swellability of PLA can be exploited to load small molecule drugs and how its degradability in skin can release those small molecules over time.

Sign in / Sign up

Export Citation Format

Share Document