scholarly journals Experimental Study for Counter to Cross Flow Air-cooled Heat Exchangerof Annular Tube having Internal Circular grooving at Different pitches - A Review

2020 ◽  
pp. 268-274
Author(s):  
Suneel Nagar ◽  
Ajay Singh ◽  
Deepak Patel
Keyword(s):  
Heat Exchanger ◽  
Heat Exchangers ◽  
Cross Flow ◽  
Operating Conditions ◽  
Theory And Practice ◽  
Thermal Flow ◽  
Total Cost ◽  
Literature Theory ◽  
Modern Analytical ◽  
Annular Tube

The objective of this study is to provide modern analytical and empirical tools for evaluation of the thermal-flow performance or design of air-cooled heat exchangers (ACHE) and cooling towers. This review consist various factors which effect the performance of ACHE. We introduced systematically to the literature, theory, and practice relevant to the performance evaluation and design of industrial cooling. Its provide better understanding of the performance characteristics of a heat exchanger, effectiveness can be improved in different operating conditions .The total cost of cycle can be reduced by increasing the effectiveness of heat exchanger.

Numerical Modeling and Experimental Studies of the Operational Parameters of the Earth-To-Air Heat Exchanger of the Geothermal Ventilation System

2021 ◽  
Vol 23 ◽  
pp. 42-64
Author(s):  
Boris Basok ◽  
Ihor Bozhko ◽  
Maryna Novitska ◽  
Aleksandr Nedbailo ◽  
Myroslav Tkachenko
Keyword(s):  
Heat Exchanger ◽  
Heat Exchangers ◽  
Ventilation System ◽  
Experimental Studies ◽  
Operating Conditions ◽  
Operational Parameters ◽  
Cross Sectional ◽  
Distinctive Features ◽  
Sectional Shape ◽  
Experimental Bench

This article is devoted to the analysis of the heat engineering characteristics of the operation of an Earth-to-Air Heat Exchanger, EAHE, with a circular cross-sectional shape, which is a component of the geothermal ventilation system. The authors analyzed literature sources devoted to the research of heat exchangers of the soil-air type of various designs and for working conditions in various soils. Much attention is paid to the issues of modeling the operation of such heat exchangers and the distinctive features of each of these models. Also important are the results of experimental studies carried out on our own experimental bench and with the help of which the numerical model was validated. The results of these studies are the basis for the development of a method for determining the optimal diameter of an EAHE under operating conditions for soil in Kyiv, Ukraine.

Analisis Perbandingan Jenis Material Penukar Kalor Plat Datar Aliran Silang Untuk Proses Pengeringan Kayu

2021 ◽  
Vol 9 (1) ◽  
pp. 60-71
Author(s):  
Abeth Novria Sonjaya ◽  
Marhaenanto Marhaenanto ◽  
Mokhamad Eka Faiq ◽  
La Ode M Firman
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Flat Plate ◽  
Heat Exchangers ◽  
Fluid Dynamic ◽  
Cross Flow ◽  
Plate Heat ◽  
Dry Air ◽  
Copper Material ◽  
Plate Type

The processed wood industry urgently needs a dryer to improve the quality of its production. One of the important components in a dryer is a heat exchanger. To support a durable heat transfer process, a superior material is needed. The aim of the study was to analyze the effectiveness of the application of cross-flow flat plate heat exchangers to be used in wood dryers and compare the materials used and simulate heat transfer on cross-flow flat plate heat exchangers using Computational Fluid Dynamic simulations. The results showed that there was a variation in the temperature out of dry air and gas on the flat plate heat exchanger and copper material had a better heat delivery by reaching the temperature out of dry air and gas on the flat plate type heat exchanger of successive cross flow and.   overall heat transfer coefficient value and the effectiveness value of the heat exchanger of the heat transfer characteristics that occur with the cross-flow flat plate type heat exchanger in copper material of 251.74725 W/K and 0.25.

scholarly journals Analytical and Experimental Investigation of a Plate Fin Heat Exchanger at Cryogenics Temperature

2021 ◽  
Vol 39 (4) ◽  
pp. 1225-1235
Author(s):  
Ajay K. Gupta ◽  
Manoj Kumar ◽  
Ranjit K. Sahoo ◽  
Sunil K. Sarangi
Keyword(s):  
Heat Exchanger ◽  
Pressure Drop ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Heat Exchangers ◽  
Cryogenic Temperature ◽  
Operating Conditions ◽  
Inlet Temperature ◽  
Compact Size

Plate-fin heat exchangers provide a broad range of applications in many cryogenic industries for liquefaction and separation of gasses because of their excellent technical advantages such as high effectiveness, compact size, etc. Correlations are available for the design of a plate-fin heat exchanger, but experimental investigations are few at cryogenic temperature. In the present study, a cryogenic heat exchanger test setup has been designed and fabricated to investigate the performance of plate-fin heat exchanger at cryogenic temperature. Major parameters (Colburn factor, Friction factor, etc.) that affect the performance of plate-fin heat exchangers are provided concisely. The effect of mass flow rate and inlet temperature on the effectiveness and pressure drop of the heat exchanger are investigated. It is observed that with an increase in mass flow rate effectiveness and pressure drop increases. The present setup emphasis the systematic procedure to perform the experiment based on cryogenic operating conditions and represent its uncertainties level.

Minimum Irreversibility Criteria for Heat Exchanger Configurations

1999 ◽  
Vol 121 (4) ◽  
pp. 241-246 ◽  
Author(s):  
F. E. M. Saboya ◽  
C. E. S. M. da Costa
Keyword(s):  
Heat Capacity ◽  
Heat Exchanger ◽  
Heat Exchangers ◽  
Cross Flow ◽  
Second Law Of Thermodynamics ◽  
The Other ◽  
Maximum Heat ◽  
Transfer Rates ◽  
Mass Flow Rates ◽  
Flow Heat

From the second law of thermodynamics, the concepts of irreversibility, entropy generation, and availability are applied to counterflow, parallel-flow, and cross-flow heat exchangers. In the case of the Cross-flow configuration, there are four types of heat exchangers: I) both fluids unmixed, 2) both fluids mixed, 3) fluid of maximum heat capacity rate mixed and the other unmixed, 4) fluid of minimum heat capacity rate mixed and the other unmixed. In the analysis, the heat exchangers are assumed to have a negligible pressure drop irreversibility. The Counterflow heat exchanger is compared with the other five heat exchanger types and the comparison will indicate which one has the minimum irreversibility rate. In this comparison, only the exit temperatures and the heat transfer rates of the heat exchangers are different. The other conditions (inlet temperatures, mass flow rates, number of transfer units) and the working fluids are the same in the heat exchangers.

A Practical Approach to Energy Optimization Using Pinch Analysis: A Case Study of an Oil Refinery

2021 ◽  
Author(s):  
Paschal Uzoma Ndunagu ◽  
Emeka Emmanuel Alaike ◽  
Theophile Megueptchie
Keyword(s):  
Heat Exchanger ◽  
Heat Exchangers ◽  
Energy Savings ◽  
Operating Cost ◽  
Energy Optimization ◽  
Distillation Unit ◽  
Pinch Analysis ◽  
Cost Index ◽  
Heat Exchanger Network ◽  
Total Cost

Abstract The objective of this paper is to perform an energy optimization study using pinch analysis on the Heat Exchanger Network (HEN) of a Crude Distillation Unit to maximum heat recovery, minimize energy consumption and increase refining margin. The heat exchanger network (HEN) considered comprises exchangers from the pre-heat section of the atmospheric distillation unit, which recovers heat from the product streams to incrementally heat the crude oil feed stream before entering the furnace. This paper illustrates how to perform a detailed HEN retrofitting study using an established design method known as Pinch Analysis to reduce the operating cost by increasing energy savings of the HEN of an existing complex refinery of moderate capacity. Analysis and optimization were carried out on the HEN of the CDU consist a total of 19 heat exchangers which include: process to process (P2P) heat exchangers, heaters and coolers. In the analysis, different feasible retrofit scenarios were generated using the pinch analysis approach. The retrofit designs included the addition of new heat exchangers, rearrangement of heat exchanger (re-sequencing) and re-piping of existing exchangers. Aspen Hysys V9 was used to simulate the CDU and Aspen Energy Analyser was used to perform pinch analysis on the HEN of the pre-heat train. Several retrofit scenarios were generated, the optimum retrofit solution was a trade-off between the capital cost of increasing heat exchanger surface area, payback time, energy / operating cost savings of hot and cold utilities. Results indicated that by rearrangement (Re-sequencing), the pre-heat train can reduce hot (fired heat) and cold (air and cooling water) utilities consumption to improve energy savings by 8% which includes savings on fired heat of about 4.6 MW for a payback period of 2 years on capital investment. The results generated were based on a ΔTmin of 10°C and pinch temperature of 46.3°C. Initial sensitivity analysis on the ΔTmin indicated that variation of total cost index is quite sensitive and increases with increase in ΔTmin at the temperature range of 14.5-30°C, however total cost index remains constant and minimal at a temperature range between 10°C-14.5°C for the CDU preheat train under study. In addition, the implementation of the optimum retrofit result is straightforward and feasible with minimum changes to the existing base case/design.

The Effect of Geometrical Features on Air-Side Heat Transfer and Friction Characteristics, and Optimization of a Large-Size Plain Fin-and-Tube Heat Exchanger by 3-D Numerical Simulation

2009 ◽  
Author(s):  
M. Izadi ◽  
D. K. Aidun ◽  
P. Marzocca ◽  
H. Lee
Keyword(s):  
Heat Transfer ◽  
Numerical Modeling ◽  
Heat Exchanger ◽  
Heat Exchangers ◽  
Simple Algorithm ◽  
Operating Conditions ◽  
Friction Characteristics ◽  
Tube Heat Exchanger ◽  
Large Size ◽  
Geometrical Features

The effect of geometrical features on the air-side heat transfer and friction characteristics of an industrial plain fin-and-tube heat exchanger is investigated by 3-D numerical modeling and simulations. The heat exchanger has been designed and employed as an intercooler in a gas power plant and is a large-size compact heat exchanger. Most of the available design correlations developed so far for plain fin–and–tube heat exchangers have been prepared for small-size exchangers and none of them fits completely to the current heat exchanger regarding the geometrical limitations of correlations. It is shown that neglecting these limitations and applying improper correlations may generate considerable amount of error in the design of such a large-size heat exchanger. The geometry required for numerical modeling is produced by Gambit® software and the boundary conditions are defined regarding the real operating conditions. Then, three-dimensional simulations based on the SIMPLE algorithm in laminar flow regime are performed by FLUENT™ code. The effect of fin pitch, tube pitch, and tube diameter on the thermo-hydraulic behavior of the heat exchanger is studied. Some variations in the design of the heat exchanger are suggested for optimization purposes. It is finally concluded that the current numerical model is a powerful tool to design and optimize of large-size plain fin-and-tube heat exchangers with acceptable accuracy.

Transient Response of Cross Flow Heat Exchangers Subjected to Simultaneous Temperature and Flow Perturbations

2015 ◽  
Vol 799-800 ◽  
pp. 665-670
Author(s):  
Karthik Silaipillayarputhur
Keyword(s):  
Heat Exchanger ◽  
Heat Exchangers ◽  
Convection Heat Transfer ◽  
Cross Flow ◽  
Balance Equations ◽  
Transfer Resistance ◽  
Mass Flow Rates ◽  
Flow Heat ◽  
Transient Thermal ◽  
Central Finite Difference

This paper compares the transient thermal performance between counter and parallel cross flow heat exchangers subjected to time varying inlet mass flow rates and inlet temperatures that hasn’t been previously discussed in the available literature. Specifically the transient performance of 2 pass and 3 pass cross flow heat exchangers is discussed in this paper. In the present study the energy balance equations for the hot and cold fluids and the heat exchanger wall were solved using an implicit central finite difference method. Representative values of NTU were considered, and the NTU’s of the heat exchanger were assumed to be uniformly distributed among the heat exchanger passes. Other physically significant parameters such as the capacity rate ratio and the convection heat transfer resistance ratio were systematically varied. A detailed summary based on the observations has been presented.

Design Modification Investigation of a Concept Heat Exchanger for Better Efficiency through Thermal Simulation

2013 ◽  
Vol 631-632 ◽  
pp. 1026-1031
Author(s):  
Tousif Ahmed ◽  
Md. Abu Abrar ◽  
Md. Tanjin Amin
Keyword(s):  
Heat Exchanger ◽  
Heat Exchangers ◽  
Flow Analysis ◽  
Flow Simulation ◽  
Thermal Simulation ◽  
Attractive Alternative ◽  
Computational Domain ◽  
Thermal Flow ◽  
Design Modification ◽  
Compact Design

Thermal flow simulation can be used to study the fluid flow and heat transfer for a wide variety of engineering equipment. Flow simulations with the advent of computer architectures with superfast processing capabilities are rapidly emerging as an attractive alternative to conventional thermal flow analysis which is either too restrictive or expensive. In thermodynamic applications, increase of thermal efficiency of heat exchangers (i.e. radiators, cooling towers, condensers, intercoolers) is essential for compact design and improving whole cycle efficiency thus improving economic viability of the system. This paper outlines the process taken to optimize the geometry of conventional heat exchanger. Models were drawn into Solidworks and a computational domain was created. Solidworks Thermal Simulation was used to iterate toward a converged solution with the goal of obtaining a better efficiency of the heat exchanger. The results are analyzed and compared between two differently designed heat exchangers to find out the improvements. These practices were detailed in hopes that further research would use the ground work laid out in this paper to redesign existing heat exchangers.

Performance Analysis of Multi-Pass Cross-Flow Heat Exchangers

2018 ◽  
Author(s):  
Kiran Lankalapalli ◽  
Ahmed ElSawy ◽  
Stephen Idem
Keyword(s):  
Heat Exchanger ◽  
Performance Analysis ◽  
Thermal Performance ◽  
Heat Exchangers ◽  
Cross Flow ◽  
Threshold Value ◽  
Finned Tube ◽  
Flow Heat ◽  
Rate Ratios ◽  
Side Flow

A steady state sensible performance analysis of multi-pass cross-flow finned-tube heat exchangers is reported. The investigation considers various flow circuiting, such as counter cross-flow, parallel cross-flow, and cross-flow where the tube-side flow is in parallel. A previously developed matrix approach is used to evaluate the heat exchanger performance in each tube pass. The equations required to model the thermal performance of these configurations are presented, and the thermal performance is compared for each type of flow circuiting. Thereafter a parametric study on cross-flow heat exchanger performance is performed by varying physically significant parameters such as number of transfer units (NTU) and capacity rate ratios, and the graphical results for each type of flow circuiting are presented both for both two-pass and three-pass arrangements. A consistent criterion is proposed for each case, wherein increasing the NTU beyond a certain threshold value does not significantly improve heat exchanger thermal performance.

Thermal Analysis Technique for Coolers Operating in Off and Low Load Conditions

2012 ◽  
Author(s):  
Thomas J. Muldoon
Keyword(s):  
Heat Exchanger ◽  
Power Plant ◽  
Heat Exchangers ◽  
Cooling Water ◽  
Control Valve ◽  
Operating Conditions ◽  
Outlet Temperature ◽  
Inlet Valve ◽  
Plant Personnel ◽  
Load Conditions

The most conservatively designed power plant heat exchangers are designed to meet a maximum heat load with minimum fluid temperature differences. When the input temperatures are less than design maximums, the cooler will usually be in a position of over performance. This relationship is especially true when the heat exchanger is a closed Component Cooling Water (CCW) heat exchanger with inlet fluid at ambient conditions. Maintaining a consistent cooling temperature is an important concern in the operation of a power plant. It is important that the cooling needs of the equipment such as the hydrogen coolers are maintained at a set temperature. Overcooling may not be of benefit to the equipment. The component which cools the service water with the local cooling water is a component cooling water heat exchanger (CCW). The two primary methods of controlling the heat rejection performance on these vessels is to throttling the tubeside flow to get a consistent shell outlet temperature with control valves or leave the tubeside flow constant and by-pass a portion of the shellside flow. Estimating the performance of the heat exchanger with given set of inlet conditions and a fixed design point can be accomplished using a the Number Transfer Units (NTU) method. Opening and closing the control valve is based on the estimated performance. This analysis can be used by power plant personnel to gauge the operation of these vessels over varying operating conditions. The analysis can also include the effect of different values of cleanliness and the extent of throttling. As a unit experiences fouling, additional flow is required to meet the thermal requirements. Depending upon the extent of fouling, the inlet valve will be either opened or closed. Plant personnel may observe the cooling water inlet temperature and the extent to which the inlet valve is open, and use that information to determine possible fouling and setup a maintenance schedule. The following analytical approach for evaluating low, critical, or off load conditions is important in the design and operation of these types of power plant heat exchangers, piping and control valve systems.

Sign in / Sign up

Export Citation Format

Share Document