scholarly journals Study of Structural and Optical Properties of Fe2+ Doped Tin Oxide Nanoparticles

2019 ◽  
Vol 8 (1) ◽  
pp. 8-12 ◽  
Author(s):  
K Sreekar Reddy ◽  
S. Nithiyanantham ◽  
G. Geetha ◽  
R. Annie Sujatha ◽  
S. Mahalakshmi
Keyword(s):  
Tin Dioxide ◽  
Sol Gel ◽  
Ammonium Hydroxide ◽  
Chemical Compositions ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Uv Visible ◽  
Tin Oxide Nanoparticles ◽  
Conduction Properties

Tin dioxide nanoparticles (SnO2) were synthesized by a sol-gel method. And tin tetra chloride (SnCl4) and ammonium hydroxide (NH4OH) were used as the precursor. NH4OH maintain the homogeneity and stoichiometry of solution through pH. The obtained powder subjected to calcination about 110oC. The obtained samples are characterized by X-ray diffraction, Scanning electron microscope, Fourier transform infrared spectroscope and UV-Visible spectroscopy. From the characterizations it is confirmed that the tetragonal structure and the particles are small and nanosizes, The O-H stretching and C=C bending stretching with chemical compositions are analyzed. The improved conduction properties through lower bandgap and the results are further interpreted and discussed.

ITO Thin Films on Silicon Buffer by Sol Gel Method

2006 ◽  
Vol 514-516 ◽  
pp. 1155-1160 ◽  
Author(s):  
Talaat Moussa Hammad
Keyword(s):  
Thin Films ◽  
Indium Tin Oxide ◽  
Optical Transmission ◽  
Sol Gel ◽  
Precursor Solution ◽  
Charge Carriers ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ito Thin Films ◽  
Uv Visible

Sol gel indium tin oxide thin films (In: Sn = 90:10) were prepared by the sol-gel dipcoating process on silicon buffer substrate. The precursor solution was prepared by mixing SnCl2.2H2O and InCl3 dissolved in ethanol and acetic acid. The crystalline structure and grain orientation of ITO films were determined by X-ray diffraction. The surface morphology of the films was characterized by scanning electron microscope (SEM). Optical transmission and reflectance spectra of the films were analyzed by using a UV-visible spectrophotometer. The transport properties of majority charge carriers for these films were studied by Hall measurement. ITO thin film with electrical resistivity of 7.6 ×10-3 3.cm, Hall mobility of approximately 2 cm2(Vs)-1 and free carrier concentration of approximately 4.2 ×1020 cm-3 are obtained for films 100 nm thick films. The I-V curve measurement showed typical I-V characteristic behavior of sol gel ITO thin films.

scholarly journals Structural and optical properties of SnO2–Al2O3 nanocomposite synthesized via sol-gel route

2015 ◽  
Vol 33 (4) ◽  
pp. 714-718 ◽  
Author(s):  
Neeraj K. Mishra ◽  
Chaitnaya Kumar ◽  
Amit Kumar ◽  
Manish Kumar ◽  
Pratibha Chaudhary ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Optical Properties ◽  
Sol Gel ◽  
Physical Interaction ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Sensing Applications ◽  
Scanning Electron

AbstractA nanocomposite of 0.5SnO2–0.5Al2O3 has been synthesized using a sol-gel route. Structural and optical properties of the nanocomposite have been discussed in detail. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive X-ray diffraction spectroscopy confirm the phase purity and the particle size of the 0.5SnO2–0.5Al2O3 nanocomposite (13 to 15 nm). The scanning electron microscopy also confirms the porosity in the sample, useful in sensing applications. The FT-IR analysis confirms the presence of physical interaction between SnO2 and Al2O3 due to the slight shifting and broadening of characteristic bands. The UV-Vis analysis confirms the semiconducting nature because of direct transition of electrons into the 0.5SnO2–0.5Al2O3 nanocomposites.

Structural and Optical Properties of Al Co-Doped ZnCoO Thin Film

2014 ◽  
Vol 989-994 ◽  
pp. 656-659
Author(s):  
Ping Cao ◽  
Yue Bai
Keyword(s):  
Thin Film ◽  
Optical Properties ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Al Doping ◽  
X Ray ◽  
Uv Emission ◽  
Uv Absorption Spectroscopy ◽  
Co Doped

Al co-doped ZnCoO thin film has been prepared by a sol-gel method. The structural and optical properties of the sample were investigated. X-ray diffraction and UV absorption spectroscopy analyses indicate that Al3+ and Co2+ substitute for Zn2+ without changing the wurtzite structure. With the Al doping, the visible emission increased and the UV emission decreased, which is attributed to the increase of O vacancies and Zn interstitials.

scholarly journals Effect of Re and Tm-site on morphology structure and optical band gap of ReTmO3 (Re: La, Ce, Nd, Gd, Dy, Y and Tm: Fe, Cr) prepared by sol-gel method

2018 ◽  
Vol 64 (4) ◽  
pp. 381
Author(s):  
Muhammad Tufiq Jamil ◽  
Javed Ahmad ◽  
Syed Hamad Bukhari ◽  
Murtaza Saleem
Keyword(s):  
Band Gap ◽  
Sol Gel ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
X Ray Diffraction ◽  
Orthorhombic Crystal ◽  
X Ray ◽  
Average Grain Size ◽  
Auto Combustion ◽  
Uv Visible

Rare earth nano sized pollycrystalline orthoferrites and orthocromites ReT mO3 (Re = La, Nd, Gd, Dy, Y and T m = Fe, Cr) have been synthesized by sol-gel auto combustion citrate method. The samples have been characterized by means of X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX), and UV-visible spectroscopy. The samples are single phase as confirmed by XRD analysis and correspond to the orthorhombic crystal symmetry with space group pbnm. Debye Scherer formula and Williamson Hall analysis have been used to calculate the average grain size which is consistent with that of determined from SEM analysis and varied between 25-75 nm. The elemental compositions of all samples have been checked by EDX analysis. Different crystallographic parameters are calculated with strong structural correlation among Re and Tm sites. The optical energy band gap has been calculated by using Tauc relation estimated to be in the range of 1.77 - 1.87 eV and 2.77 - 3.14 eV, for ReFeO3 and ReCrO3, respectively.

ZnO-SiO2/Laponite Photocatalyst: Kinetic Study on Photocatalytic Decolorization of Methylene Blue

2014 ◽  
Vol 896 ◽  
pp. 541-544
Author(s):  
Is Fatimah ◽  
N. Nunani Yuyun
Keyword(s):  
Methylene Blue ◽  
Energy Dispersive Spectrometry ◽  
Photocatalytic Performance ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Photocatalytic Decolorization ◽  
Uv Visible ◽  
Gel Preparation ◽  
Adsorption Desorption

ZnO-SiO2/Laponite was prepared by sol-gel preparation procedure consit of SiO2 pillarization to laponite followed by ZnO dispersion by using zinc acetate as precursor. The obtained material was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), diffuse reflectance UV-Visible (DRUV-Vis) and N2 adsorption-desorption analysis. The photocatalytic performance of the amterial in methylene blue decolorization was also investigated. Compared with ZnO-SiO2 nanoparticles, it is concluded that ZnO-SiO2/Laponite possess higher photocatalytic activity which obey Temkin isotherm model.

An Investigation on Structural and Optical Properties of Nanocrystalline Bismuth Ferrite and Manganese Sillenite Powders

2020 ◽  
Vol 835 ◽  
pp. 317-323
Author(s):  
D.A. Rayan ◽  
E.A. Abdel-Mawla ◽  
S.K. Mohamed ◽  
A.A. Mohamed ◽  
Mohamed M. Rashad
Keyword(s):  
Optical Properties ◽  
Bismuth Ferrite ◽  
Ammonium Hydroxide ◽  
Band Gap Energy ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Munk Function ◽  
Ft Ir ◽  
Uv Visible ◽  
Co Precipitation

Nanocrystalline bismuth ferrite BFO; BiFeO3 and manganese sillenite, BMO; Bi12MnO20 (BMO) powders have been successfully elaborated using a facile co-precipitation approach. The formed materials were examined using X-ray diffraction analysis (XRD), field emission scanning electron microscopy (FE-SEM). Furthermore, the change in the optical properties was performed based on Fourier transform infrared spectroscopy (FT-IR) and UV-visible spectrophotometer. Typical, pure BiFeO3 and Bi12MnO20 phases were detected for the precursors precipitated at pH 10 based on ammonium hydroxide as a base then annealed at 500°C for 2h. Eventually, the optical band gap energy of BFO and BMO using Kubelka–Munk function based on Tauc’s plot was found to be 2.12 and 2.79 eV, respectively.

Structural and Optical Properties of Commercial Microparticle Zinc Oxide

2020 ◽  
Vol 990 ◽  
pp. 302-305
Author(s):  
Razif Nordin ◽  
Nadia Latiff ◽  
Rizana Yusof ◽  
Wan Izhan Nawawi ◽  
M.Z. Salihin ◽  
...  
Keyword(s):  
Room Temperature ◽  
Band Gap Energy ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Xrd Pattern ◽  
X Ray ◽  
Commercial Grade ◽  
Irregular Shapes ◽  
Visible Spectra ◽  
Uv Visible

Commercial grade ZnO were sieved into particle size of 38 to 90 μm at room temperature. X-ray diffraction (XRD) pattern confirms the hexagonal wurzite structure of ZnO microparticles. Irregular shapes of ZnO microparticles were observed by scanning electron microscope (SEM). Fourier transform infrared spectra (FTIR) confirmed the presence of Zn-O band. In addition, Uv-visible spectra (UV-Vis) were empolyed to estimate the band gap energy of ZnO microparticles.

Sensing Nanoparticulate ZnO with Benzimidazole Derivative by Fluorescence

2013 ◽  
Vol 543 ◽  
pp. 63-67
Author(s):  
Jayabharathi Jayaraman ◽  
Jayamoorthy Karunamoorthy
Keyword(s):  
Diffuse Reflectance ◽  
Electrochemical Impedance ◽  
Fluorescent Sensor ◽  
Sol Gel ◽  
Benzimidazole Derivative ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Visible ◽  
Doped Zno ◽  
Scanning Electron

A sensitive benzimidazole derivative fluorescent sensor for nanoparticulate ZnO has been designed and synthesized. The nanocrystalline ZnO, Ag doped ZnO and Cu doped ZnO have been synthesised by sol-gel method and characterized by powder X-ray diffraction, scanning electron microscopy (SEM) and UV-visible diffuse reflectance, photoluminescence and electrochemical impedance spectroscopies. The synthesized sensor emits fluorescence at 360 nm and this fluorescence is selectively enhanced by nanocrystalline ZnO. This technique is sensitive to detect and estimate ZnO at micro molar level. Impurities such as Ag and Cu do not hamper the sensitivity of this technique significantly. Keywords: Sensor, SEM, EDX, Impedance, Fluorescence

scholarly journals The High Photocatalytic Activity of SnO2Nanoparticles Synthesized by Hydrothermal Method

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Pham Van Viet ◽  
Cao Minh Thi ◽  
Le Van Hieu
Keyword(s):  
Photocatalytic Activity ◽  
Hydrothermal Method ◽  
High Photocatalytic Activity ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Uv Illumination ◽  
Transmission Electron ◽  
Uv Visible ◽  
Tin Oxide Nanoparticles

Tin oxide nanoparticles (SnO2NPs) were prepared at low temperature by hydrothermal method. Synthesized SnO2NPs were confirmedviacharacterization techniques such as UV-visible spectroscopy (UV-vis), X-ray diffraction (XRD), and Transmission Electron Microscope (TEM). The synthesized nanoparticles were in the size of 3 nm and they have high photocatalytic activity. The result showed that SnO2NPs degraded 88.88% MB solution after 30 minutes of UV illumination and reached 90.0% for 120 minutes (2 hours) of UV illumination. Moreover, they degraded 79.26% MB solution after 90 minutes (1.5 hours) under assisted sunlight illumination.

scholarly journals Synthesis and Characterizations of LaMnO3 Perovskite Powders Using Sol-Gel Method 

2021 ◽  
Author(s):  
Deniz ÇOBAN ÖZKAN ◽  
Ahmet Türk ◽  
Erdal Celik
Keyword(s):  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Dye Sensitized Solar Cells ◽  
Ammonium Hydroxide ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dye Sensitized ◽  
Gel Technique ◽  
Sensitized Solar Cells

Abstract The present research demonstrates the synthesis and characterization of LaMnO3 perovskite powders using the sol-gel technique for dye-sensitive solar cell applications. With this respect, transparent solutions were prepared from La and Mn based precursors, distilled water and citric acid monohydrate. Ammonium hydroxide was incorporated into the La-Mn solution in order to neutralize/precipitate at 24oC for 1 hour in the air. The solution was allowed to evaporate on a hot plate device at 90 °C in the air. The obtained solutions were dried at 90 oC for 24 hours to form a xerogel structure, dried at 200 oC for 2 hours and consequently annealed at 500 and 850 oC for 2 hours in the air. Thermal, structural, microstructural, optical and magnetic properties of the powders were characterized through differential thermal analysis-thermogravimetry (DTA-TG), Fourier transform infrared (FTIR), X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), scanning electron microscopy (SEM), Malvern zeta sizer (PSD), UV-vis spectrometer and vibrating sample magnetometer (VSM). The obtained results indicate promise, especially the low band range, that LaMnO3 powders can be used in dye-sensitized solar cells and can positively affect performance and efficiency.

Sign in / Sign up

Export Citation Format

Share Document