scholarly journals Growth and Yield Performance of Tidal Local Aman Rice as Influenced by USG Application at Non Tidal Condition

2015 ◽  
Vol 18 (1) ◽  
pp. 71-80
Author(s):  
SMS Abedin ◽  
MA Mannan ◽  
MAA Mamun ◽  
GKM M Rahman ◽  
AJ Mridha
Keyword(s):  
Grain Yield ◽  
Dry Matter ◽  
Early Growth ◽  
Research Field ◽  
Growth And Yield ◽  
Tidal Condition ◽  
Main Plot ◽  
Initiation Stage ◽  
Planting Materials ◽  
Plot Design

An experiment was carried out at research field of Bangladesh Rice Research Institute, Gazipur to evaluate the performance of tidal local aman rice as influenced by urea super granule (USG) at non-tidal condition. Four tidal local aman varieties such as Sadamota, Razashail, Kutiagoni and Kalagura were used as planting materials. Nitrogen was applied as USG (1.8g) at 10 days after transplanting (DAT), 25 DAT, before panicle initiation (BPI) stage (date of PI stage of these 4 varieties were identified from previous experience) and no nitrogen (control). The experiment was laid out in a split-plot design where varieties in main plot and USG in sub-plot with three replications. Varietals response was significant on plant height, effective tillers hill-1, grains panicle-1 and grain yield. All the yield and yield components were influenced significantly by the time of USG application. Higher dry matter was produced by all the varieties when USG was applied at early growth stage (10 to 25 DAT) but crop lodges at milking stage due to more vegetative growth resulting increases sterility, decreases grain fertility and yield. On the other hand, when USG was applied at BPI stage grain fertility and yield were increased. The highest grain yield (3.51 t ha-1) was recorded from Kalagura when USG applied before panicle initiation stage. So, application of USG at BPI stage in local aman rice in non-tidal condition increased yield resulting higher gross and net return in all varieties.Bangladesh Agron. J. 2015, 18(1): 71-80

scholarly journals Performance of Wheat as Affected by Different Irrigation Levels and Sowing Dates

2017 ◽  
Vol 14 (2) ◽  
pp. 77-85
Author(s):  
Md Sohel Mahmud ◽  
Md Jafar Ullah ◽  
Md Abdullahil Baque ◽  
Lutfun Naher ◽  
Sayed Mohammad Mohsin
Keyword(s):  
Grain Yield ◽  
Maximum Yield ◽  
Growth And Yield ◽  
Sowing Time ◽  
Sowing Dates ◽  
Two Factors ◽  
Main Plot ◽  
Irrigation Levels ◽  
1000 Grain Weight ◽  
Plot Design

The experiment was conducted to determine the effect of irrigations and sowing dates on growth and yield performance of wheat in the experimental field of Sher-e-Bangla Agricultural University, Dhaka, Bangladesh during the period of November 18, 2012 to March 30, 2013. The experiment was comprised of two factors, viz. factor A: two irrigations namely irrigation (I) and no irrigation i.e. control (I0), and factor B: three sowing dates such as S1: 1st sowing on 18 November, S2: 2nd sowing on 03 December and S3: 3rd sowing on 18 December. The experiment was laid out in a split plot design with three replications. Irrigation was assigned in the main plot, while sowing time was in the sub-plots. Data on grain yield and different yield contributing characters were taken after harvest. Results indicated that the highest grain yield was obtained with I (2.915 t ha-1) and S1 (2.983 t ha-1). The interaction of irrigation (I) and sowing on 18 November (S1) showed the maximum yield (3.387t ha-1), spike length (17.08 cm), 1000 grain weight (43.4 g), spikelets spike-1 (20.03) and grain spike-1 (65.58) of wheat.The Agriculturists 2016; 14(2) 77-85

scholarly journals Growth Performance of Lentil by the Effect of Irrigation and Boron Splitting Asfoliar Application

2020 ◽  
Vol 22 (2) ◽  
pp. 139-150
Author(s):  
S Paul ◽  
TS Roy ◽  
R Chakraborty ◽  
M Roy ◽  
SC Sarker
Keyword(s):  
Dry Matter ◽  
Foliar Spray ◽  
Dry Weight ◽  
Research Field ◽  
Growth And Yield ◽  
Four Levels ◽  
Set Up ◽  
Number Of Branches ◽  
Plot Design ◽  
Plant Length

A field experiment was conducted for evaluating the effect of irrigation and boron splitting as foliar spray on growth and yield of lentil at the Research Field of the Department of Agronomy, Sher-e-Bangla Agricultural University, Dhaka from November, 2018 to March, 2019.Three levels of irrigation viz., I0: control, I1: one irrigation at 25 days after sowing (DAS), I2: two irrigations at 25 DAS and 40 DAS and boron was applied by four levels viz., B0: control, B1: 80% recommended dose as basal + rest 20% as foliar spray (FS) at pre-flowering (PF), B2: 60% RD as basal + rest 40% as FS at PF, B3: 40% RD as basal + rest 60% as FS at PF. The experiment was fully set up in a split-plot design with three replications. Two irrigations at 25 and 40 DAS result produced that the highest plant length, branches plant-1, leaves plant-1, dry weight plant-1. On the other hand, B3 (40% RD as basal + rest 60% as FS at PF) produced significantly the highest growth of lentil. Result also showed that the highest plant length (27.59 cm), number of branches (5.73) and plant dry matter (4.83 g) recorded from I2B3 combinations. Therefore, the combination of two irrigations at 25 and 40 DAS and boron at 40% RD as basal + rest 60% as foliar spray at pre-flowering might be considered as effective dose for the cultivation of lentil in Bangladesh. Bangladesh Agron. J. 2019, 22(2): 139-150

scholarly journals Effect of mulch and nutrients on growth and yield in transplanted ginger

2019 ◽  
Author(s):  
Sandra Merin Mathew ◽  
G. S. Sreekala
Keyword(s):  
Plant Height ◽  
Growth And Yield ◽  
College Of Agriculture ◽  
Ginger Rhizome ◽  
Main Plot ◽  
Number Of Leaves ◽  
Four Levels ◽  
Shoot Weight ◽  
Planting Materials ◽  
Plot Design

The conventional propagation method using ginger rhizome being slow, a suitable method of raising ginger seed material in portrays has been devised by Indian Institute of Spices Research and Kerala Agricultural University. The advantages of this technology are production of healthy uniform planting materials and reduction in seed rhizome quantity which eventually reduced cost on rhizomes. The experiment was carried out in the Instructional Farm, College of Agriculture, Vellayani during April 2016 to January 2017. The ginger variety used was Karthika. Field experiment was laid out in split plot design with four levels of mulches in main plots and fertilizer levels in sub plots with four replications. Two nodded rhizome bits of ginger cultivar was raised in protrays were transplanted at 55 days in beds taken in the interspaces of coconut. Plants that received M1 (30 t ha1) in main plot resulted in maximum plant height, number of tillers, number of leaves/plant shoot weight, fresh yield and dry yield treatment T2 (150:100:100 kg ha1 and their interaction (m1t2) also resulted in highest plant height, number of tillers, number of leaves/plant, shoot weight, fresh yield and dry yield on all periods of observation The results of the study indicated that ginger transplants intercropped in coconut garden, that mulching @ 30 t ha1 ( half at transplanting and half 2 MAT) along with 150:100:100 kg NPK ha-1 and basal application of 30 t ha-1 of farm yard manure could be recommended for higher yield and growth.

scholarly journals Strategy of nitrogen fertilizer application to increase growth and yield of rice in ratoon system at tidal swampland

2020 ◽  
pp. 1004-1010
Author(s):  
Gribaldi Gribaldi ◽  
Nurlaili Nurlaili ◽  
Firnawati Sakalena ◽  
Nurmala Dewi ◽  
Ardi Asroh
Keyword(s):  
Grain Yield ◽  
Nitrogen Fertilizer ◽  
Nitrogen Fertilization ◽  
Fertilizer Application ◽  
Growth And Yield ◽  
Good Effect ◽  
Rice Varieties ◽  
Main Crop ◽  
Main Plot ◽  
Plot Design

This study aims to determine the effect of regulating the provision of nitrogen fertilizer on several rice varieties on the growth and yield of rice in ratoon system at the Tidal swampland. A split plot design was employed in this experiment. The main plot was nitrogen fertilizer application (N) consisting of N1, N2, N3, and N4. The subplot is rice varieties (V) consisting of Inpari 30 (V1), Inpara 3 (V2), Inpari 33 (V3), Inpari 43 (V4) and Hipa 5 Ceva (V5). The results showed that ½ dose nitrogen fertilization given at planting + ½ dose at primordia had a good effect on the growth and yield of the main crop, whereas 1/3 dose nitrogen fertilization given at planting + 1/3 dose at primordia + 1/3 dose at harvest tends to have a good effect on ratoon yield. Variety Hipa 5 Ceva produced highest yield of unhusked rice (i.e. 4.9 tons ha-1 for the main crop and 2.71 tons ha-1 for ratoon) at (N3): 135 kg N ha-1 fertilizer, when ½ dose was given at planting + ½ dose at primordia. The variety Hipa 5 Ceva with various nitrogen fertilization strategies provided the highest total grain yield in the ratoon system at tidal swampland.

scholarly journals Effect of Magnetization of Nano Fertilization on The Growth and Yield of Wheat Triticum Aestivum L

2021 ◽  
Vol 923 (1) ◽  
pp. 012087
Author(s):  
Al-Saidan Khudhair Joudah Yasir
Keyword(s):  
Grain Yield ◽  
Positive Response ◽  
Mineral Fertilizer ◽  
Triticum Aestivum L ◽  
Growth And Yield ◽  
Growth Stages ◽  
Interaction Treatment ◽  
Main Plot ◽  
Fertilization Level ◽  
Plot Design

Abstract A field experiment was conducted in Al-Fadhiliya city, Dhi Qar province during the winter agricultural season 2019 - 2020 for the purpose of studying the effect of magnetization of nano Fertilization on the growth and yield of wheat. The experiment was carried out according to Split Plot Design and using the RCBD Design with three replications. The first factor included Magnetization levels of the Nano Fertilization (Gs) (0 Gs (Gs1),750 Gs (Gs2),1500 Gs (Gs3) for 15 minute (in main plot) while the second factor included the Nano Fertilization levels for (N, P) (F) 1 Kg.ha−1(F1), 1.5 Kg.ha−1(F2), 2 Kg.ha−1(F3)(according to the recommendation of the manufacturer (1 - 2 Kg.ha−1))(in sub plot). Mineral fertilizer add for (N, P) by 120 Kg N.ha−1, 100 Kg P ha−1. Mineral and nano fertilizer section for three growth stages (ZGs21, ZGs32, ZGs49). The results showed a positive response to the studied traits of variety Bohouth 22 (Plant height, number of tillers, number of grains and total grain yield) given the highest averages at the level of magnetism (Gs3) and fertilization level (F3)(109.33 cm, 426.2 tiller.m−2, 73.22 grain. spike−1, 1.859 t.d−1),(108.44 cm, 471.4 tiller.m−2, 77.78 grain. spike−1, 1.915 t.d-1) respectively, while the level of magnetism (Gs1) and fertilization level (F1) giving the lowest averages (95.11 cm, 341.3 tiller.m−2, 60.11 grain. spike−1, 1.437 t.d−1), (96.22 cm, 312.1 tiller.m−2, 54.00 grain. spike−1, 1.412 t.d−1) respectively. The level of magnetism (Gs1) and fertilization level (F1) gave the highest average in weight 1000 grain (43.188, 44.266)g respectively, while the magnetization level (Gs3) and fertilization level (F3) giving the lowest average (42.092,41.182)g respectively. Interaction treatment (Gs3F3) gave the highest average grain yield 2.1773 t.d−1 while the interaction treatment (Gs1F1) gave the lowest average attained 1.218 t.d−1.

scholarly journals Performance of Prilled Urea and Urea Super Granules on the Growth and Yield of Wheat

2015 ◽  
Vol 18 (1) ◽  
pp. 37-48
Author(s):  
L Nahar ◽  
MH Ali ◽  
SM Masum ◽  
MM Mahbub ◽  
SR Haque
Keyword(s):  
Grain Yield ◽  
Harvest Index ◽  
Dry Weight ◽  
Grain Weight ◽  
Growth And Yield ◽  
Wheat Varieties ◽  
Prilled Urea ◽  
Main Plot ◽  
1000 Grain Weight ◽  
Plot Design

An experiment was conducted at the Agronomy Field of Sher-e-Bangla Agricultural University, Dhaka-1207 during the period from November 2011 to March 2012 to evaluate the performance of prilled urea and urea super granules (USG) on the growth and yield of wheat varieties. The experiment comprised of four wheat varieties viz., BARI Gom 21, BARI Gom 24, BARI Gom 25 and BARI Gom 26, and five nitrogen (N) levels viz., control (no Nitrogen), 84 kg ha-1 N from USG, and 30, 50 and 70 kg N ha-1 from prilled urea i.e., 67, 112 and 155 kg urea ha-1. The experiment was laid out in a split-plot design with three replications where wheat varieties were placed in the main plot and nitrogenous fertilizers in sub-plots. Experimental results indicated that different varieties had the significant effect on plant height, number of tillers and dry weight plant-1, and number of grains spike-1, grain and straw yield, and harvest index. The variety BARI Gom 24 produced the highest grain yield (2.49 t ha-1) that mainly attributed by the maximum number of spikes plant-1, number of grains spike-1 and 1000-grain weight. Among the different nitrogenous fertilizers 84 kg N ha-1 from USG (1.8 g) gave the highest grain yield (2.69 t ha-1) due to the maximum number of spikes plant-1, maximum number of grains spike-1 and 1000-grain weight. The variety BARI Gom 24 produced the highest grain yield (2.80 t ha-1) with 80 kg N ha-1 from USG application.Bangladesh Agron. J. 2015, 18(1): 37-48

scholarly journals Effect of Irrigation and Mulch Materials on Growth and Yield of Wheat

2018 ◽  
Vol 21 (1) ◽  
pp. 71-76 ◽  
Author(s):  
S Rummana ◽  
AKMR Amin ◽  
MS Islam ◽  
GM Faruk
Keyword(s):  
Grain Yield ◽  
Growth And Yield ◽  
Plastic Mulch ◽  
Flowering Stage ◽  
Higher Plant ◽  
Main Plot ◽  
Black Plastic ◽  
Four Levels ◽  
Initiation Stage ◽  
And Control

An experiment was carried out in Agronomy field of Sher-e-Bangla Agricultural University, Dhaka to find out the performance of wheat (var. BARI Gom 27) as influenced by time of irrigation and different mulch materials during 2015-2016. Four levels of irrigation viz. control, one irrigation at CRI (crown root initiation) stage, one irrigation at flowering stage and two irrigations each at CRI + flowering stage; and four different mulch materials viz. control, rice straw, rice husk and plastic sheets were considered as treatment variables. The experiment was laid out in a split- plot design with three replications, assigning irrigation to main plot and mulch materials to sub plots. Results showed that time of irrigation and different mulch materials had significant effect on plant characters, yield and yield components of wheat. Two irrigations given at CRI + flowering stage resulted with significantly higher plant height, number of spikelets spike-1, number of grains spike-1, 1000- grain weight, grain yield, straw yield and harvest index over one irrigation and control plots. Among mulch materials, black plastic mulch resulted with significantly higher grain yield of wheat. The highest grains (4.15 t ha-1) and straw yields (4.25 t ha-1) were obtained with two irrigations at CRI and flowering stage with black plastic mulch for achieving higher productivity. Bangladesh Agron. J. 2018, 21(1): 71-76

scholarly journals Dosis Pupuk Fosfat Terhadap Pertumbuhan dan Hasil Beberapa Jagung Hibrida

2018 ◽  
Vol 20 (2) ◽  
pp. 34
Author(s):  
Herlina Mega Puspitasari ◽  
Ahmad Yunus ◽  
Dwi Harjoko
Keyword(s):  
Zea Mays ◽  
Primary Source ◽  
Research Field ◽  
Growth And Yield ◽  
Hybrid Corn ◽  
Split Plot ◽  
Main Plot ◽  
Research Fact ◽  
Plot Design

<p>Corn (Zea mays) is a primary source of food after rice, considered as cerealia crops. This research to analyzing about growth and yield of several variety of hybrid corn on phospat fertilizer dosage giving because in Indonesia the land is nutrient-deficient phospat. This research has been held on June until October 2017 in Kecamatan Piyungan, Kabupaten Bantul, Daerah Istimewa Yogyakarta. Plan which used in this research are Split Plot Design which consist of 2 factors which observed three varieties of hybrid corn (ABCD, EFGH and IJKL) as main plot and phospat fertilizer dosage giving (0, 100 and 150 kilogram ha)  as  sub plot which repeated three times. Research fact found that the topography of the research field is 40% of the plains with a slope of less than 2% and 60% of hilly areas with a slope above 40.1% and the type of the soil is regosol with the highest temperature recorded at the study site was 32ºC with the lowest temperature of 23ºC, then phospat fertilizer dosage is strongly influence the growth and yield of each hybrid corn variety. The best dosage of fosfat fertilizer for corn growth is 150 kilogram ha on each variety, which are ABCD variety, EFGH, and IJKL. The best habit of the growth and yield of hybrid corn is on the phospat fertilizer dosage giving at 150 kilogram ha with variety EFGH.</p>

scholarly journals Growth and yield performance of soybean with the application of Bradyrhyzobium inoculant via furrow and seed

2017 ◽  
Vol 38 (4Supl1) ◽  
pp. 2387
Author(s):  
Santiel Alves Vieira Neto ◽  
Fábio Ribeiro Pires ◽  
João Carlos Madalão ◽  
Douglas Gomes Viana ◽  
Carlos César Evangelista de Menezes ◽  
...  
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Agricultural Production ◽  
Aerial Part ◽  
Dry Matter ◽  
Growth And Yield ◽  
Recommended Dose ◽  
Yield Performance ◽  
Seed Inoculation ◽  
Dry Matter Weight

Given the high costs of agricultural production, especially due to the price of fertilisers, particularly nitrogen, the use of inoculants to supply nitrogen to soybean crops is a widely recommended practice. The objective of this study was to evaluate the feasibility of applying inoculants through seed and planting furrow in soil previously cultivated with soybean and Brazilian native “cerrado” biome soil under greenhouse conditions. Seven treatments were tested: 1) inoculation via seed (inoculant + fungicide + micronutrient), 2) treatment via seed (fungicide + micronutrient), 3) control (only seed), 4) inoculation via furrow-dose 1 (recommended dose), 5) inoculation via furrow-dose 2 (twice the recommended dose), 6) inoculation via furrow-dose 3 (three times the recommended dose) and 7) inoculation via furrow-dose 1 + seed inoculation. We evaluated plant height, fresh and dry matter weight of the aerial part and nodules, number of total, viable and non-viable nodules, number of pods per plant and grain yield. Inoculation was more effective when used in cerrado soil, but soybean performance in treatments without inoculation was higher in previously cultivated soil. Application through furrow proved to be a viable practice due to the similarity of the results obtained with the traditional application by seed.

scholarly journals Effect of sowing time on growth and yield attributes of three mustard cultivars grown in Tidal Floodplain of Bangladesh

2017 ◽  
Vol 14 (2) ◽  
pp. 155-160
Author(s):  
MAR Sharif ◽  
MZ Haque ◽  
MHK Howlader ◽  
MJ Hossain
Keyword(s):  
Grain Yield ◽  
Leaf Area Index ◽  
Dry Matter ◽  
Growth And Yield ◽  
Index Number ◽  
Sowing Time ◽  
Area Index ◽  
Yield Attributes ◽  
Sowing Dates ◽  
1000 Grain Weight

The experiment was conducted at the field laboratory of the Patuakhali Science and Technology University, Patuakhali, Bangladesh during the period from November, 2011 to March 2012 under the tidal Floodplain region to find out optimum sowing time for the selected three cultivars (BARI Sharisha-15, BINA Sharisha-5 and BARI Sharisha-9). There were four sowing dates viz. 30 November, 15 December, 30 December and 15 January. Significant variations due to different sowing dates were observed in plant height, total dry matter, leaf area index, number of siliqua plant-1, seeds silique-1, 1000-grain weight, grain yield and HI. Results showed that the highest grain yield (1.73 t ha-1) was obtained from the first sowing (30 November) with BINA Sharisha-5 and it was significantly different from the yields of all other combination.J. Bangladesh Agril. Univ. 14(2): 155-160, December 2016

Sign in / Sign up

Export Citation Format

Share Document