scholarly journals Evaluation of broiler dark house illumination systems, with and without thermal insulation

2021 ◽  
Vol 10 (12) ◽  
pp. e170101220155
Author(s):  
Karison Ferreira Pan ◽  
Jair Antonio Cruz Siqueira ◽  
Samuel Nelson Melegari de Souza ◽  
Luciene Kazue Tokura ◽  
Carlos Eduardo Camargo Nogueira ◽  
...  
Keyword(s):  
Thermal Insulation ◽  
Light Emitting Diode ◽  
Allocative Efficiency ◽  
Great Influence ◽  
Fluorescent Light ◽  
Uniformity Coefficient ◽  
Natural Lighting ◽  
Contour Maps ◽  
Lighting Systems ◽  
Broiler House

In the breeding of broiler house, the proper use of lighting systems has great influence on the welfare and the productivity of the birds. The objective was to evaluate two artificial lighting systems used in broiler house in terms of the allocative efficiency of luminance. One of the broiler house was closed with black raffia bag (dark house), without thermal insulation (NTI) and its lighting was composed of incandescent, compact fluorescent light (LFCs) and light emitting diode (LED) bulbs. The other broiler house was closed with extruded polystyrene panels (XPS) and thermally insulated (TI), and its lighting was composed of compact fluorescent lamps. The influence of external light of sun inside the broiler house was analyzed by means of exhaust holes and the degree of distribution of illumination through statistical analyzes and the study of the distribution uniformity coefficient (DUC). Contour maps were prepared showing the degree of internal luminance distribution for each broiler house, specifically in the area that did not suffer interference from external natural sunlight. The results showed that natural lighting influenced the internal lighting across the last 18 meters at the end of the broiler house and there was a more homogeneous lighting in the broiler house TI.

scholarly journals The Impact of Modern Artificial Lighting on the Optimum Window-to-Wall Ratio of Residential Buildings in Jordan

2021 ◽  
Vol 11 (13) ◽  
pp. 5888
Author(s):  
Aiman Albatayneh ◽  
Haya Atieh ◽  
Mustafa Jaradat ◽  
Murad Al-Omary ◽  
Maha Zaquot ◽  
...  
Keyword(s):  
Energy Savings ◽  
Residential Buildings ◽  
Light Emitting Diode ◽  
Residential Building ◽  
Artificial Lighting ◽  
Natural Lighting ◽  
Residential Structures ◽  
Lighting Systems ◽  
Ashrae Standards ◽  
The Impact

Energy savings gained through natural lighting could be offset by the loss of energy through windows; therefore, the target of this study is to examine the effects of enhancing the efficiency of lighting systems on the optimum window-to-wall ratio (WWR) of Jordanian residential structures. This research proposes the hypothesis that the WWR of residential structures that contain artificial lighting systems with increased efficiency will be lower than buildings in which solar lighting is provided. The energy simulation tool, DesignBuilder, was used to simulate an intricate model showing a standard Jordanian residential building with a size of 130 m2. The study offers useful guidance regarding the optimum WWR for key decisionmakers when designing energy-efficient residential structures in the context of Jordan. By considering the balance between gains and losses in solar heat and light gain to exploit energy from solar sources with no reverse effects, while making comparisons between different WWR situations, the findings indicate that the typical WWR for residential structures in Jordan that have efficient Light Emitting Diode (LED) systems of lighting installed could be between 25% and 30%, which is lower than the highest WWR stipulated by the ASHRAE standards.

scholarly journals A Supervisory Control Strategy for Improving Energy Efficiency of Artificial Lighting Systems in Greenhouses

Energies ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 202
Author(s):  
Gianluca Serale ◽  
Luca Gnoli ◽  
Emanuele Giraudo ◽  
Enrico Fabrizio
Keyword(s):  
Control Strategy ◽  
Light Emitting Diode ◽  
Cost Savings ◽  
Energy Performance ◽  
Lighting System ◽  
Light Emitting ◽  
Artificial Lighting ◽  
Lighting Control ◽  
Lighting Systems ◽  
Power Densities

Artificial lighting systems are used in commercial greenhouses to ensure year-round yields. Current Light Emitting Diode (LED) technologies improved the system efficiency. Nevertheless, having artificial lighting systems extended for hectares with power densities over 50W/m2 causes energy and power demand of greenhouses to be really significant. The present paper introduces an innovative supervisory and predictive control strategy to optimize the energy performance of the artificial lights of greenhouses. The controller has been implemented in a multi-span plastic greenhouse located in North Italy. The proposed control strategy has been tested on a greenhouse of 1 hectare with a lighting system with a nominal power density of 50 Wm−2 requiring an overall power supply of 1 MW for a period of 80 days. The results have been compared with the data coming from another greenhouse of 1 hectare in the same conditions implementing a state-of-the-art strategy for artificial lighting control. Results outlines that potential 19.4% cost savings are achievable. Moreover, the algorithm can be used to transform the greenhouse in a viable source of energy flexibility for grid reliability.

scholarly journals Light Emitting Diodes (LEDs) as Agricultural Lighting: Impact and Its Potential on Improving Physiology, Flowering, and Secondary Metabolites of Crops

2021 ◽  
Vol 13 (4) ◽  
pp. 1985
Author(s):  
Musa Al Murad ◽  
Kaukab Razi ◽  
Byoung Ryong Jeong ◽  
Prakash Muthu Arjuna Samy ◽  
Sowbiya Muneer
Keyword(s):  
Crop Production ◽  
Morphological Changes ◽  
Light Emitting Diode ◽  
Crop Productivity ◽  
Photon Flux ◽  
Flower Initiation ◽  
Nutrient Metabolism ◽  
Light Emitting ◽  
Cultivation Systems ◽  
Lighting Systems

A reduction in crop productivity in cultivable land and challenging environmental factors have directed advancement in indoor cultivation systems, such that the yield parameters are higher in outdoor cultivation systems. In wake of this situation, light emitting diode (LED) lighting has proved to be promising in the field of agricultural lighting. Properties such as energy efficiency, long lifetime, photon flux efficacy and flexibility in application make LEDs better suited for future agricultural lighting systems over traditional lighting systems. Different LED spectrums have varied effects on the morphogenesis and photosynthetic responses in plants. LEDs have a profound effect on plant growth and development and also control key physiological processes such as phototropism, the immigration of chloroplasts, day/night period control and the opening/closing of stomata. Moreover, the synthesis of bioactive compounds and antioxidants on exposure to LED spectrum also provides information on the possible regulation of antioxidative defense genes to protect the cells from oxidative damage. Similarly, LEDs are also seen to escalate the nutrient metabolism in plants and flower initiation, thus improving the quality of the crops as well. However, the complete management of the irradiance and wavelength is the key to maximize the economic efficacy of crop production, quality, and the nutrition potential of plants grown in controlled environments. This review aims to summarize the various advancements made in the area of LED technology in agriculture, focusing on key processes such as morphological changes, photosynthetic activity, nutrient metabolism, antioxidant capacity and flowering in plants. Emphasis is also made on the variation in activities of different LED spectra between different plant species. In addition, research gaps and future perspectives are also discussed of this emerging multidisciplinary field of research and its development.

scholarly journals Increased Plant Quality, Greenhouse Productivity and Energy Efficiency with Broad-Spectrum LED Systems: A Case Study for Thyme (Thymus vulgaris L.)

Plants ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 960
Author(s):  
Jenny Manuela Tabbert ◽  
Hartwig Schulz ◽  
Andrea Krähmer
Keyword(s):  
Broad Spectrum ◽  
Energy Savings ◽  
Light Emitting Diode ◽  
Thymus Vulgaris ◽  
Light Spectrum ◽  
Light Emitting ◽  
Biomass Yields ◽  
Lighting Systems

A light-emitting diode (LED) system covering plant-receptive wavebands from ultraviolet to far-red radiation (360 to 760 nm, “white” light spectrum) was investigated for greenhouse productions of Thymus vulgaris L. Biomass yields and amounts of terpenoids were examined, and the lights’ productivity and electrical efficiency were determined. All results were compared to two conventionally used light fixture types (high-pressure sodium lamps (HPS) and fluorescent lights (FL)) under naturally low irradiation conditions during fall and winter in Berlin, Germany. Under LED, development of Thymus vulgaris L. was highly accelerated resulting in distinct fresh yield increases per square meter by 43% and 82.4% compared to HPS and FL, respectively. Dry yields per square meter also increased by 43.1% and 88.6% under LED compared to the HPS and FL lighting systems. While composition of terpenoids remained unaffected, their quantity per gram of leaf dry matter significantly increased under LED and HPS as compared to FL. Further, the power consumption calculations revealed energy savings of 31.3% and 20.1% for LED and FL, respectively, compared to HPS. In conclusion, the implementation of a broad-spectrum LED system has tremendous potential for increasing quantity and quality of Thymus vulgaris L. during naturally insufficient light conditions while significantly reducing energy consumption.

Reliability of High-Power Light Emitting Diode Attached With Different Thermal Interface Materials

2010 ◽  
Vol 132 (3) ◽  
Author(s):  
Xin Li ◽  
Xu Chen ◽  
Guo-Quan Lu
Keyword(s):  
High Power ◽  
Heat Dissipation ◽  
Light Emitting Diode ◽  
Temperature Cycling ◽  
Fluorescent Light ◽  
Light Sources ◽  
Light Emitting ◽  
Die Attach ◽  
Nanosilver Paste ◽  
Interconnection Material

As a solid electroluminescent source, white light emitting diode (LED) has entered a practical stage and become an alternative to replace incandescent and fluorescent light sources. However, due to the increasing integration and miniaturization of LED chips, heat flux inside the chip is also increasing, which puts the packaging into the position to meet higher requirements of heat dissipation. In this study, a new interconnection material—nanosilver paste is used for the LED chip packaging to pursue a better optical performance, since high thermal conductivity of this material can help improve the efficiency of heat dissipation for the LED chip. The bonding ability of this new die-attach material is evaluated by their bonding strength. Moreover, high-power LED modules connected with nanosilver paste, Sn3Ag0.5Cu solder, and silver epoxy are aged under hygrothermal aging and temperature cycling tests. The performances of these LED modules are tested at different aging time. The results show that LED modules sintered with nanosilver paste have the best performance and stability.

scholarly journals THE INFLUENCE OF THE METHOD OF LAYING PIPELINES ON THE ENERGY EFFICIENCY OF THE HEATING NETWORK

2019 ◽  
Vol 10 (2) ◽  
pp. 59-66
Author(s):  
E. A Biryuzova ◽  
A. S Glukhanov
Keyword(s):  
Energy Efficiency ◽  
Heat Loss ◽  
Thermal Insulation ◽  
Thermal Energy ◽  
Great Influence ◽  
Temperature Fields ◽  
Insulation Material ◽  
Design Work ◽  
Heat Networks ◽  
Insulation Thickness

Through pipelines of heat networks, due to their large length, a large amount of thermal energy is lost. Identification of technical solutions related to improving the energy efficiency of heating networks is an urgent task at present. The article is devoted to the consideration of options for laying pipelines of heat networks during design work. In the conducted studies, two main methods of underground laying of pipelines of heat networks with the choice of the most energy-efficient, with minimal losses of thermal energy are considered. Channel and channelless laying methods are investigated with the same design features and technological conditions of operation of pipelines of heat networks using the same thermal insulation material. For each option, the required thickness of the thermal insulation is determined by the normalized density of the heat flow, thermal calculations are performed to determine the heat loss and the value of the temperature fields generated around the operating pipelines of the heat networks. The obtained values of the thermal insulation thickness in the channel method of laying pipelines are 30-50 % lower than those in channelless laying. The heat loss values, according to the results of the heat calculation for the options under consideration, in the channel method of laying are reduced by 47-65 %. The temperature fields formed around the pipelines of thermal networks with channelless laying significantly exceed the natural value of the soil temperature at the depth of the pipeline. What has a great influence on the determination of the distance to adjacent pipelines and other utilities, laid underground, in the zone of the thermal network. A comparative analysis of the results obtained makes it possible to single out the choice of the method of laying the pipeline into a group of measures aimed at energy saving and increasing energy efficiency in heating systems.

Energy Saving Potential of Dynamic Lighting Control in Street Lighting Systems in Libya

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Salah M Alabani
Keyword(s):  
Total Energy ◽  
Energy Saving ◽  
Light Emitting Diode ◽  
Street Lighting ◽  
Light Emitting ◽  
Energy Saving Potential ◽  
Road Section ◽  
First Case ◽  
Lighting Systems ◽  
Dynamic Lighting

This paper studies the manner of energy consumption in Libyan street lighting systems and general road section. It also suggests proposal system with two cases of operation for an attempt to apply the energy saving program by adopting an optimum method in order to decrease the demand of energy in this section and to reduce the use of uneconomic equipment.The proposal system in this paper introduces the Light Emitting Diode (LED) street lighting technology to be used instead of traditional luminaries High Pressure Sodium (HPS). The proposed system is divided into two cases. The first case discusses the replacement of traditional luminaries (HPS) with energy saving luminaries (LED), while second case explains how integrating control node (dynamic dimmer) into LED in order to dim output lighting in streets will save more energy.This study reaches a result that a significant amount of energy of %47 (about 1092.23 GWh/year) of total energy consumed in street lighting sector could be saved if first case is applied. Moreover, it suggests that more energy of %58 (about 1380.02 GWh/year) of total energy consumed in the same sector cloud be saved if the second case is adopted.

Design, Measurements and Characterization of Smart Electronic Board for PV Streetlight based on LED and High Intensity Discharge Lamps

2013 ◽  
pp. 153-165
Author(s):  
Paolo Visconti ◽  
Daniele Romanello ◽  
Giovanni Zizzari ◽  
Vito Ventura ◽  
Giorgio Cavalera
Keyword(s):  
Rural Areas ◽  
High Intensity ◽  
Light Emitting Diode ◽  
Light Emitting ◽  
Electronic Board ◽  
Lighting Systems ◽  
And Control ◽  
Near Future ◽  
Hid Lamps

This work presents an electronic board for driving and control of High Intensity Discharge (HID) lamps and Light Emitting Diode (LED) lamps. The proposed electronic board is able to drive HID or LED lamps by means of a reconfigurable output. This feature allows using the ballast in lighting systems that currently use traditional discharge lamps, as well as keeping the same ballast when discharge lamps are replaced by LED modules in the near future, when LED street lighting systems will be more affordable. Additionally, since the lighting system is designed to be used in rural areas where there is no public electricity, each lighting point incorporates a system to convert solar energy into continuous voltage by means of photovoltaic panels. In this work, energy saving issues are taken into account.

scholarly journals LED Lighting System Reliability Modeling and Inference via Random Effects Gamma Process and Copula Function

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Huibing Hao ◽  
Chun Su ◽  
Chunping Li
Keyword(s):  
Random Effects ◽  
System Reliability ◽  
Light Emitting Diode ◽  
Copula Function ◽  
Performance Characteristics ◽  
Assessment Model ◽  
Gamma Process ◽  
Unknown Parameters ◽  
Reliability Modeling ◽  
Lighting Systems

Light emitting diode (LED) lamp has attracted increasing interest in the field of lighting systems due to its low energy and long lifetime. For different functions (i.e., illumination and color), it may have two or more performance characteristics. When the multiple performance characteristics are dependent, it creates a challenging problem to accurately analyze the system reliability. In this paper, we assume that the system has two performance characteristics, and each performance characteristic is governed by a random effects Gamma process where the random effects can capture the unit to unit differences. The dependency of performance characteristics is described by a Frank copula function. Via the copula function, the reliability assessment model is proposed. Considering the model is so complicated and analytically intractable, the Markov chain Monte Carlo (MCMC) method is used to estimate the unknown parameters. A numerical example about actual LED lamps data is given to demonstrate the usefulness and validity of the proposed model and method.

Sign in / Sign up

Export Citation Format

Share Document