scholarly journals Influence of functionalized nanosilica with different functional groups in the properties of cementitious composites: A review

2021 ◽  
Vol 10 (8) ◽  
pp. e27719817349
Author(s):  
Yuri Sotero Bomfim Fraga ◽  
Gabriel Lima Oliveira Martins ◽  
João Henrique da Silva Rêgo
Keyword(s):  
Mechanical Properties ◽  
Structural Analysis ◽  
Functional Groups ◽  
Scientific Community ◽  
Cementitious Materials ◽  
Cementitious Material ◽  
Nano Composites ◽  
Cementitious Composites ◽  
Narrow Size Distribution ◽  
Recent Developments

The use of supplementary nano cementitious material (SNCM) to improve the mechanical properties and durability performances of cementitious composites (cement paste, mortar and concrete) has received remarkable attention in recent studies. The use of nanosilica as SNCM is a consolidated practice in the scientific community. However, recent developments in the synthesis of monodisperse and narrow-size distribution of nanoparticles by functionalization methods provide a significant improvement to the development of silica-group nano composites (among the functional groups: amine, carboxyls and glycol groups), the so-called functionalized nanosilica (FNS). This article aims to raise a literature review on the properties of FNS in cementitious materials and the advanced techniques of nano/micro structural analysis used to characterize cementitious composites containing FNS’s.

scholarly journals An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2950
Author(s):  
Hongwei Song ◽  
Xinle Li
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Three Dimensional ◽  
Cementitious Materials ◽  
Research Area ◽  
Cementitious Composites ◽  
Split Tensile Strength ◽  
Contour Crafting ◽  
Wide Range ◽  
Active Research

The most active research area is nanotechnology in cementitious composites, which has a wide range of applications and has achieved popularity over the last three decades. Nanoparticles (NPs) have emerged as possible materials to be used in the field of civil engineering. Previous research has concentrated on evaluating the effect of different NPs in cementitious materials to alter material characteristics. In order to provide a broad understanding of how nanomaterials (NMs) can be used, this paper critically evaluates previous research on the influence of rheology, mechanical properties, durability, 3D printing, and microstructural performance on cementitious materials. The flow properties of fresh cementitious composites can be measured using rheology and slump. Mechanical properties such as compressive, flexural, and split tensile strength reveal hardened properties. The necessary tests for determining a NM’s durability in concrete are shrinkage, pore structure and porosity, and permeability. The advent of modern 3D printing technologies is suitable for structural printing, such as contour crafting and binder jetting. Three-dimensional (3D) printing has opened up new avenues for the building and construction industry to become more digital. Regardless of the material science, a range of problems must be tackled, including developing smart cementitious composites suitable for 3D structural printing. According to the scanning electron microscopy results, the addition of NMs to cementitious materials results in a denser and improved microstructure with more hydration products. This paper provides valuable information and details about the rheology, mechanical properties, durability, 3D printing, and microstructural performance of cementitious materials with NMs and encourages further research.

Study on CO2 Sequestration Property of Cement Based Composite Cementitious Materials Containing Steel Slag Used in Road

2011 ◽  
Vol 311-313 ◽  
pp. 1949-1952 ◽  
Author(s):  
Ying Li Gao ◽  
Ling Cheng
Keyword(s):  
Mechanical Properties ◽  
Growth Rate ◽  
Compressive Strength ◽  
Mass Fraction ◽  
Carbon Emission ◽  
Steel Slag ◽  
Cementitious Materials ◽  
Current Situation ◽  
Cementitious Material

Cement based composite cementitious material containing steel slag used in road has been prepared to deal with the current situation that the transportation carbon emission increased year by year. In this material, 40% cement has been replaced by equivalent steel slag, which has the ability of CO2sequestration. This paper studied the CO2sequestration effect and the mechanical properties of the pure cement, the pure steel slag, and the cement based composite cementitious materials containing steel slag. It has been shown that the cement based composite cementitious materials containing steel slag have excellent CO2sequestration property. The mass fraction growth rate of carbon reached 10.86% after 1 hour carbonation experiment, the value between which of pure cement and pure steel slag, and the compressive strength of the composite cementitious materials at 28-day age can reach 45.3MPa, meeting the requirements of road.

Mechanical Properties and Microstructure Analysis of Copper Tailings Solidifying with Different Cementitious Materials

2014 ◽  
Vol 878 ◽  
pp. 171-176 ◽  
Author(s):  
Xu Quan Huang ◽  
Hao Bo Hou ◽  
Min Zhou ◽  
Wei Xin Wang
Keyword(s):  
Mechanical Properties ◽  
Blast Furnace ◽  
Blast Furnace Slag ◽  
Calcium Silicate Hydrate ◽  
Steel Slag ◽  
Cementitious Materials ◽  
Cementitious Material ◽  
Hydration Products ◽  
New Type ◽  
Furnace Slag

With new type steel slag-blast furnace slag-fluorgypsum-based cemented material, P O42.5 cement, commonly used cementation agent in China, mechanical properties and microstructure of tailings solidification bodies are studied. The hydration products and morphology tailings concretion body in 60 days are analyzed by SEM and XRD test, which reveals the tailings cementation mechanism solidifying with different cementitious material. Furthermore, a large number of slender bar-like ettringite crystals and filamentous network-like calcium-silicate-hydrate gels bond firmly each other, which is the most important reason why steel slag-blast furnace slag-fluorgypsum base cemented material has the best tailings cementation mechanical properties.

scholarly journals Graphene-engineered cementitious composites

2017 ◽  
Vol 7 ◽  
pp. 184798041774230 ◽  
Author(s):  
Qiaofeng Zheng ◽  
Baoguo Han ◽  
Xia Cui ◽  
Xun Yu ◽  
Jinping Ou
Keyword(s):  
Mechanical Properties ◽  
Graphene Oxide ◽  
Transport Properties ◽  
Building Block ◽  
Cementitious Materials ◽  
Atomic Scale ◽  
Cementitious Composites ◽  
Two Dimensional ◽  
Graphene Nanoplatelet ◽  
Carbon Allotrope

Graphene, a two-dimensional monoatomic thick building block of a carbon allotrope, has emerged as nano-inclusions in cementitious materials due to its distinguished mechanical, electrical, thermal, and transport properties. Graphene nanoplatelet and its oxidized derivative graphene oxide were found to be able to reinforce and modify the cementitious materials from atomic scale to macroscale, and thereby endow them with excellent mechanical properties, durability, and multifunctionality. This article reviews the progress of fabrication, properties, mechanisms, and applications of graphene-based cementitious composites.

Effect of Red Mud on Mechanical Properties of Loess–Containing Aluminosilicate Based Cementitious Materials

2009 ◽  
Vol 610-613 ◽  
pp. 155-160
Author(s):  
Jian Hua Wan ◽  
Heng Hu Sun ◽  
Ying Ying Wang ◽  
Chao Li
Keyword(s):  
Mechanical Properties ◽  
Red Mud ◽  
Cementitious Materials ◽  
Cementitious Material ◽  
The Other ◽  
Term Strength ◽  
Other Hand ◽  
Early Strength ◽  
The One

The effect of the thermal treated red mud on mechanical properties of loess –containing aluminosilicate based cementitious materials is investigated. And the characteristic of hydration production is tested using XRD, SEM and EDAX methods. The results show that the thermal treated red mud not only has excellent cementitious properties but also can improve the mechanical properties of loess –containing aluminosilicate based cementitious materials. Moreover when the content of red mud is 5%, the improved effect is optimal. On the one hand, the alkaline ingredients of red mud can promote abundant ettringites to produce at early ages. And the ettringites contribute to early strength of the cementitious material. On the other hand, the content of red mud is too high to improve the long-term strength.

scholarly journals The effects of hydroxide and epoxide functional groups on the mechanical properties of graphene oxide and its failure mechanism by molecular dynamics simulations

RSC Advances ◽  
2020 ◽  
Vol 10 (49) ◽  
pp. 29610-29617 ◽  
Author(s):  
Yunjin Sun ◽  
Xing Tang ◽  
Hongwei Bao ◽  
Zhi Yang ◽  
Fei Ma
Keyword(s):  
Mechanical Properties ◽  
Molecular Dynamics ◽  
Graphene Oxide ◽  
Molecular Dynamics Simulations ◽  
Failure Mechanism ◽  
Functional Groups ◽  
Nano Composites ◽  
Interface Adhesion ◽  
Dynamics Simulations

Graphene oxide (GO) could be assembled via amphiphilic interface adhesion into nano-composites.

scholarly journals Mechanical Properties and Deterioration Instability of Filling Body with Gangue-Cement Material Based on AE Experiment

2022 ◽  
Vol 2022 ◽  
pp. 1-18
Author(s):  
Guofeng Yu ◽  
Yunchun Han ◽  
Xiaoyang Yu ◽  
Ren Bao ◽  
Jiaxing Guo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Energy ◽  
Cementitious Materials ◽  
Cementitious Material ◽  
Linear Deformation ◽  
Forming Mechanism ◽  
Damage And Failure ◽  
Filling Materials ◽  
Key Factor ◽  
Failure Types

Gangue materials have been used to solve mine disasters with a support tunnel along the goaf and filling mining. Mastering the properties and damage characteristics of filling materials is an important basis for effective implementation. Based on the conventional uniaxial compression acoustic emission (AE) test, the effects of cementitious materials, ratio between water and cementitious material, gangue particle size, and grading parameters on the mechanical properties of gangue-cement samples were analyzed. The stage characteristics of compression deformation were studied. The fracture propagation characteristics and rock mass failure types induced by different graded gangues were revealed. The fracture forming mechanism from clustered damage and failure was interpreted. The results show that the compressive strength of the backfill increases with the increase of cementitious material; however, it decreases with the increase of water binder ratio. Controlling the proportion and dosage of materials was the key factor to realizing pumpability and stability. Combined with the deformation and AE characteristics, the failure stage of the backfill body is divided into three stages: linear deformation-low energy changing, block compression-high energy changing, and gentle stability-stable energy changing. Affected by the gangue distribution, the load in each stage will induce fracture to produce five distribution modes of single, turning, breakthrough, bifurcated, and collapsed surrounding gangue. In the process of loading failure, different gradation and particle sizes will also change its stress concentration characteristics, resulting in the transformation of rock failure types. The surface structure and roughness of gangue play an important role in the compressive performance of cement paste. The research results try to provide some guidance for efficient filling mining.

scholarly journals A review of the effect and optimization of use of nano-TiO2 in cementitious composites

2022 ◽  
Author(s):  
Mahmud Sami Döndüren ◽  
◽  
Mohammed Gamal Al-Hagri ◽  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Setting Time ◽  
Cementitious Materials ◽  
Partial Replacement ◽  
Cementitious Composites ◽  
Nano Materials ◽  
Microstructural Properties ◽  
Nano Tio2 ◽  
Cement Based Materials

There are some problems and weaknesses related to cement-based materials, such as their very low tensile strength, low chemical resistance and the huge contribution of cement production to industrial CO2 emissions. One possible method to reduce the impacts of such problems is the partial replacement of cement in cementitious materials with nano materials. This work provides a detailed review of incorporation of one of the most widely used nano materials, namely nano-titanium dioxide, and its effect on the properties of cementitious composites. Different properties have been considered in the current study, such as fresh properties, mechanical properties (compressive strength, split tensile strength and flexural strength), durability (permeability, ultrasonic pulse velocity (UPV), electrical resistivity, carbonation resistance, freeze and thaw resistance and sulfate attack resistance) and microstructural properties. This paper also investigates the optimum content of nano-TiO2 in cement-based materials. Moreover, the cost effectiveness of use on nano-titania in cementitious composites has been discussed. Nano titania reduces the workability and setting time of cement-based materials. It can be very effective in improving the mechanical properties, durability and microstructural properties of cementitious composites.

Sign in / Sign up

Export Citation Format

Share Document