scholarly journals Reutilization of Recycled Cellulose Diacetate From Discarded Cigarette Filters in Production of Stone Mastic Asphalt Mixtures

2021 ◽  
Vol 8 ◽  
Author(s):  
Huachen Liu ◽  
Yikun Chen ◽  
Yongjie Xue
Keyword(s):  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
Polyacrylonitrile Fiber ◽  
Cellulose Diacetate ◽  
Mastic Asphalt ◽  
Stone Mastic Asphalt ◽  
Infrared Spectrometer ◽  
Corrugated Structure

In this paper, recycled cellulose diacetate (rCDA) derived from cigarette butts was used as a fiber stabilizer to develop stone mastic asphalt (SMA) mixtures. The characterizations of rCDA were investigated by scanning electron microcopy (SEM), a Fourier transform infrared spectrometer (FTIR), and a thermogravimetric analyzer (TGA). Volumetric stability, temperature stability, moisture stability, and fatigue performance of SMA mixtures with rCDA were tested to obtain the pavement performance. Results showed that rCDA appeared to have a tough surface texture with a curly and corrugated structure, which facilitated the enhancement of the cohesion bond with the asphalt binder. TG-DTG indicated that the maximum weight loss (62.48%) obtained at temperatures ranging from 294.1°C to 376.0°C was due to decomposition and degradation of organic matters. When 0.4% rCDA was used in the asphalt mixture, the dynamic stability was 4,105 cycles/mm. The ultimate flexural strength and flexural stiffness modulus were 3,722 MPa and 9.7 MPa. It indicated that the temperature stability of 0.4% rCDA was superior to 0.3% polyacrylonitrile fiber (PAN), while inferior to 0.3% polyester (PET). The value of tensile strength ratio and residual Marshall stability were 80.2 and 75.3%, respectively. The fatigue life of 0.4% rCDA was technically like that of 0.3% PAN and 0.3% PET at lower stress levels. All results concluded that the optimum content of rCDA in asphalt mixtures was 0.4% by mass of the binder.

Stability of Asphalt Binder and Asphalt Mixture Modified by Polyacrylonitrile Fibers

2011 ◽  
Vol 228-229 ◽  
pp. 242-247 ◽  
Author(s):  
Li Yang Yao ◽  
Yun Peng Hu ◽  
Qin Ma ◽  
Xian Wei Ma
Keyword(s):  
High Temperature ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Methyl Cellulose ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
Pavement Performance ◽  
Polyacrylonitrile Fiber ◽  
High Temperature Stability ◽  
Temperature Crack

The research was conducted to evaluate pavement properties of polyacrylonitrile fiber asphalt binder and asphalt mixtures, including high temperature stability of binder and mixture, low temperature crack resistance and water stability of mixture. Moreover, polyacrylonitrile fibers were compared with methyl cellulose in the asphalt binder and asphalt mixtures. The result indicates that polyacrylonitrile fibers may improve clearly the high temperature stability of asphalt binder, and pavement performance of mixtures is enhanced obviously. Also polyacrylonitrile fiber binder and mixtures have better performance than methyl cellulose.

scholarly journals Effect of Addition of Rubber Granulate and Type of Modified Binder on the Viscoelastic Properties of Stone Mastic Asphalt Reducing Tire/Road Noise (SMA LA)

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3446
Author(s):  
Wladyslaw Gardziejczyk ◽  
Andrzej Plewa ◽  
Raman Pakholak
Keyword(s):  
Viscoelastic Properties ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Low Noise ◽  
Asphalt Mixtures ◽  
Compression Tests ◽  
Road Noise ◽  
Stiffness Modulus ◽  
Mastic Asphalt ◽  
Stone Mastic Asphalt

The use of rubber granulate in the composition of asphalt mixtures, as well as the use of poroelastic layers, is indicated by many research centers as a factor with a positive effect on tire/road noise reduction. Attention is however paid to their lower structural durability compared to asphalt concrete (AC) or stone mastic asphalt (SMA). Stone mastic asphalt reducing tire/road noise (SMA LA) layers have also been recently used as low-noise road surfaces. The article presents the test results of viscoelastic properties of asphalt mixtures SMA8 LA, SMA8 LA containing 10%, 20%, and 30% of rubber granulate, with bitumen 50/70, bitumen 50/70 modified with styrene butadiene styrene (SBS) copolymer, crumb rubber, and mixtures with bitumen modified simultaneously with crumb rubber and SBS copolymer. The reference asphalt mixture was the porous asphalt (PA8). The presented results of water damage resistance, degradation resistance in the Cantabro abrasion loss test, stiffness modulus as a function of temperature and hysteresis loop proved that the amount of rubber granulate and the type of binder significantly affect the values of these parameters. Attention was paid to the possibility of using the results of uniaxial cyclic compression tests when determining the proportion of rubber granulate in SMA8 LA mixtures. Tests of hysteresis loops and stiffness modulus confirm much higher elasticity of SMA8 LA mixtures with rubber granulate as compared to mixtures without the addition of granulate.

scholarly journals Effect of Palm Oil Clinker (POC) Aggregate on the Mechanical Properties of Stone Mastic Asphalt (SMA) Mixtures

2020 ◽  
Vol 12 (7) ◽  
pp. 2716
Author(s):  
Ali Babalghaith ◽  
Suhana Koting ◽  
Nor Sulong ◽  
Mohamed Karim ◽  
Syakirah Mohammed ◽  
...  
Keyword(s):  
Palm Oil ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Binder Content ◽  
Mix Design ◽  
Fine Aggregate ◽  
Mastic Asphalt ◽  
Fine Aggregates ◽  
Stone Mastic Asphalt ◽  
Aggregate Composition

Aggregate composition has a pivotal role in ensuring the quality of pavement materials. The use of waste materials to replace the aggregate composition of asphalt pavement leads to green, sustainable, and environmentally friendly construction, which ultimately preserves nature by reducing the need to harvest materials from natural sources. Using the Marshall mix design, the main objective of this paper is to investigate the effects of waste palm oil clinker (POC) as fine aggregates replacement on the properties of stone mastic asphalt (SMA) mixture. Six groups of asphalt mixtures were prepared using different percentages of palm oil clinker content (0%, 20%, 40%, 60%, 80%, and 100%). To determine the Marshall properties and select the optimum binder content, asphalt mixture samples with different percentages of asphalt binder content (5.0%, 5.5%, 6.0%, 6.5%, and 7.0%) were prepared for each group. The results showed that the palm oil clinker was appropriate for use as a fine aggregate replacement up to 100% in SMA mixture and could satisfy the mix design requirements in terms of Marshall stability, flow, quotient, and volumetric properties. However, the percentage of palm oil clinker replacement as fine aggregate has merely influenced the optimum binder content. Furthermore, there were improvements in the drain down, resilient modulus and indirect tensile fatigue performances of the SMA mixture. In conclusion, the use of POC as fine aggregates replacement in SMA mixture indicates a good potential to be commercialized in flexible pavement construction.

Experimental Study of Asphalt Mixtures Containing Polyolefin/Ethylene Copolymer Modifier by Dry Process

2013 ◽  
Vol 671-674 ◽  
pp. 1945-1949 ◽  
Author(s):  
Hua Yin ◽  
Yao Ting Zhu
Keyword(s):  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Experimental Tests ◽  
Asphalt Mixtures ◽  
Pavement Performance ◽  
Test Results ◽  
High Temperature Stability ◽  
Dry Process ◽  
Ethylene Copolymer

This paper presents a laboratory test to characterize the pavement performance of asphalt mixture containing polyolefin/ethylene copolymer modifier. The modifier is directly added into mixture like aggregates and is not necessary to modify the asphalt binder firstly, which is different with conventional modifier and is so-called dry process. Based on the aggregate grade of AC-13 mixture, the mechanical properties of polyolefin/ethylene copolymer modified hot mixtures asphalt (dry process) were studied by experimental tests, which include the high-temperature stability and water stability. The test results indicate that compared to the SBS asphalt mixture the dynamic stability and TSR improved 66% and 2.3% respectively, when the addition of RK300 is 0.3%.

A Hybrid Model to Predict the Gyratory Compaction of Hot Mixed Asphalt

2019 ◽  
Author(s):  
Teng Man
Keyword(s):  
Hybrid Model ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Aggregate Size ◽  
Asphalt Mixtures ◽  
Compaction Process ◽  
Particle Rearrangement ◽  
Compaction Behavior ◽  
Grain Size Distributions ◽  
Gyratory Compaction

The compaction of asphalt mixture is crucial to the mechanical properties and the maintenance of the pavement. However, the mix design, which based on the compaction properties, remains largely on empirical data. We found difficulties to relate the aggregate size distribution and the asphalt binder properties to the compaction behavior in both the field and laboratory compaction of asphalt mixtures. In this paper, we would like to propose a simple hybrid model to predict the compaction of asphalt mixtures. In this model, we divided the compaction process into two mechanisms: (i) visco-plastic deformation of an ordered thickly-coated granular assembly, and (ii) the transition from an ordered system to a disordered system due to particle rearrangement. This model could take into account both the viscous properties of the asphalt binder and grain size distributions of the aggregates. Additionally, we suggest to use the discrete element method to understand the particle rearrangement during the compaction process. This model is calibrated based on the SuperPave gyratory compaction tests in the pavement lab. In the end, we compared the model results to experimental data to show that this model prediction had a good agreement with the experiments, thus, had great potentials to be implemented to improve the design of asphalt mixtures.

Performance Characterization of Stone Mastic Asphalt using Steel Fiber

2021 ◽  
Vol 02 (02) ◽  
Author(s):  
Ekarizan Shaffie ◽  
◽  
H.A. Rashid ◽  
Fiona Shiong ◽  
Ahmad Kamil Arshad ◽  
...  
Keyword(s):  
Steel Fiber ◽  
Mechanical Performance ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Moisture Susceptibility ◽  
Mastic Asphalt ◽  
Bitumen Content ◽  
Stone Mastic Asphalt ◽  
The Stability ◽  
Marshall Stability

Stone Mastic Asphalt (SMA) is a gap-graded hot mixture designed to provide higher resistance towards permanent deformation and rutting potential by 30% to 40% more than dense-graded asphalt, due to its stable aggregate skeleton structure. However, compared to other types of hot mix asphalt, SMA unfortunately has some shortcomings in term of its susceptibility towards moisture-induced damage due to its structure and excessive bitumen content in the composition. This research aims to assess the performance of a SMA mixture with steel fiber by enhancing overall stability, abrasion resistance, and, most importantly, moisture susceptibility. This study involved the incorporation of various steel fiber proportions of 0%, 0.3%, 0.5% and 0.7% by the total weight of mixture. The steel fiber modified SMA was made up of 6.0% PEN 60/70 bitumen content. The performance of SMA were evaluated through Marshall stability and flow test, Cantabro loss test and indirect tensile strength test. The results obtained from the testing showed that the incorporation of steel fiber is significantly effective to enhance the resistance towards moisture damage, while increasing the stability and reducing the abrasion loss of SMA mixture, compared to conventional mixture. Overall, it can be concluded that the addition of steel fiber in asphalt mixture specifically SMA, has improved the mechanical performance in the application of asphalt pavement with the optimum steel fiber proportion of 0.3% by the weight of mixture. The developed models between the independent variables and responses demonstrated high levels of correlation. The study found that Response Surface Methodology (RSM) is an effective statistical method for providing an appropriate empirical model for relating parameters and predicting the optimum performance of an asphaltic mixture to reduce flexible pavement failure.

Determining Optimum Carbon Nanotubes Content for Asphalt Mixture in Road Pavements

2021 ◽  
Vol 1023 ◽  
pp. 121-126
Author(s):  
Van Bach Le ◽  
Van Phuc Le
Keyword(s):  
Carbon Nanotubes ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Construction Cost ◽  
Asphalt Mixtures ◽  
Static Modulus ◽  
Pavement Construction ◽  
Modified Binder ◽  
Marshall Stability

Although small amount of binder in asphalt concrete mixture may commonly range from 3.5 to 5.5% of total mixture as per many international specifications, it has a significant impact on the total cost of pavement construction. Therefore, this paper investigated the effects of five carbon nanotubes contents of 0.05%, 0.1%, 0.15%, 0.2%, 0.25% by asphalt weight as an additive material for binder on performance characteristics of asphalt mixtures. Performance properties of CNTs modified asphalt mixtures were investigated through the Marshall stability (MS) test, indirect tensile (IDT) test, static modulus (SM) test, wheel tracking (WT) test. The results indicated that asphalt mixtures with CNT modified binder can improve both the rutting performance, IDT strength and marshall stability of tested asphalt mixtures significantly at higher percentages of carbon nanotubes. However, the issue that should be considered is the construction cost of asphalt pavement. Based on the asphalt pavement structural analysis and construction cost, it can be concluded that an optimum CNT content of 0.1% by asphalt weight may be used as additive for asphalt binder in asphalt mixtures.

Laboratory Evaluation on Steel Slag as Aggregate Replacement in Stone Mastic Asphalt Mixtures

2013 ◽  
Vol 65 (2) ◽  
Author(s):  
Mohd Rosli Hainin ◽  
Gatot Rusbintardjo ◽  
Mohd Azizi Abdul Aziz ◽  
Asmah Hamim ◽  
Nur Izzi Md. Yusoff
Keyword(s):  
Steel Slag ◽  
Asphalt Mixtures ◽  
Laboratory Evaluation ◽  
Mastic Asphalt ◽  
Stone Mastic Asphalt
Sign in / Sign up

Export Citation Format

Share Document