scholarly journals Waterborne Isolates of Campylobacter jejuni Are Able to Develop Aerotolerance, Survive Exposure to Low Temperature, and Interact With Acanthamoeba polyphaga

2021 ◽  
Vol 12 ◽  
Author(s):  
Ekaterina Shagieva ◽  
Katerina Demnerova ◽  
Hana Michova
Keyword(s):  
Low Temperature ◽  
Campylobacter Jejuni ◽  
Clinical Sample ◽  
Lethal Dose ◽  
Tetracycline Resistance ◽  
Environmental Parameters ◽  
Acanthamoeba Polyphaga ◽  
Culture Methods ◽  
Microaerobic Conditions ◽  
The Impact

Campylobacter jejuni is regarded as the leading cause of bacterial gastroenteritis around the world. Even though it is generally considered to be a sensitive microaerobic pathogen, it is able to survive in the environment outside of the intestinal tract of the host. This study aimed to assess the impact of selected environmental parameters on the survival of 14 C. jejuni isolates of different origins, including 12 water isolates. The isolates were tested for their antibiotic resistance, their ability to survive at low temperature (7°C), develop aerotolerance, and to interact with the potential protozoan host Acanthamoeba polyphaga. The antibiotic susceptibility was determined by standard disk diffusion according to EUCAST. Out of the 14 isolates, 8 were resistant to ciprofloxacin (CIP) and 5 to tetracycline (TET), while only one isolate was resistant to erythromycin (ERY). Five isolates were resistant to two different antibiotic classes. Tetracycline resistance was only observed in isolates isolated from wastewater and a clinical sample. Further, the isolates were tested for their survival at 7°C under both aerobic and microaerobic conditions using standard culture methods. The results showed that under microaerobic conditions, all isolates maintained their cultivability for 4 weeks without a significant decrease in the numbers of bacteria and variation between the isolates. However, significant differences were observed under aerobic conditions (AC). The incubation led to a decrease in the number of cultivable cells, with complete loss of cultivability after 2 weeks (one water isolate), 3 weeks (7 isolates), or 4 weeks of incubation (6 isolates). Further, all isolates were studied for their ability to develop aerotolerance by repetitive subcultivation under microaerobic and subsequently AC. Surprisingly, all isolates were able to adapt and grow under AC. As the last step, 5 isolates were selected to evaluate a potential protective effect provided by A. polyphaga. The cocultivation of isolates with the amoeba resulted in the survival of about 40% of cells treated with an otherwise lethal dose of gentamicin. In summary, C. jejuni is able to adapt and survive in a potentially detrimental environment for a prolonged period of time, which emphasizes the role of the environmental transmission route in the spread of campylobacteriosis.

Comparison of Three Selective Media and Validation of the VIDAS Campylobacter Assay for the Detection of Campylobacter jejuni in Ground Beef and Fresh-Cut Vegetables

2011 ◽  
Vol 74 (3) ◽  
pp. 456-460 ◽  
Author(s):  
JUNG-WHAN CHON ◽  
JI-YEON HYEON ◽  
IN-SOO CHOI ◽  
CHAN-KYU PARK ◽  
SOO-KI KIM ◽  
...  
Keyword(s):  
Campylobacter Jejuni ◽  
Ground Beef ◽  
Food Samples ◽  
Assay Method ◽  
Enzyme Linked Immunosorbent Assay ◽  
Culture Methods ◽  
Selective Media ◽  
Fresh Cut ◽  
Microaerobic Conditions ◽  
Campylobacter Spp

In this study, three different selective media, modified cefoperazone charcoal deoxycholate agar (mCCDA), Karmali agar, and Preston agar, were compared for isolating Campylobacter jejuni from artificially contaminated ground beef and fresh-cut vegetables that have different levels of background microflora. Concurrently, an automated enzyme-linked immunosorbent assay method for detecting Campylobacter spp. (VIDAS Campylobacter) was evaluated by comparing it with the culture methods. Food samples inoculated with C. jejuni were enriched in Bolton broth at 42°C for 44 h and then streaked onto the three different selective media, followed by incubation under microaerobic conditions at 42°C for 48 h. The enriched Bolton broth (1 ml) was used in the VIDAS Campylobacter assay. No statistical differences in sensitivities were observed between the three selective media for ground beef and fresh-cut vegetables, but the selectivity of Preston agar was better (P < 0.05) than those of mCCDA and Karmali agar. The VIDAS Campylobacter assay showed a recovery rate similar (P > 0.05) to those of all of the medium combinations in ground beef. However, more positive samples (P < 0.05) were detected with the VIDAS Campylobacter than with the selective agars, except for the combinations of mCCDA plus Preston agar or mCCDA plus Karmali agar plus Preston agar in fresh-cut vegetables.

scholarly journals Multilocus Sequence Typing and FlaA Sequencing Reveal the Genetic Stability of Campylobacter jejuni Enrichment during Coculture with Acanthamoeba polyphaga

2013 ◽  
Vol 79 (7) ◽  
pp. 2477-2479 ◽  
Author(s):  
Petra Griekspoor ◽  
Jenny Olofsson ◽  
Diana Axelsson-Olsson ◽  
Jonas Waldenström ◽  
Björn Olsen
Keyword(s):  
Campylobacter Jejuni ◽  
Genetic Stability ◽  
Environmental Samples ◽  
Molecular Techniques ◽  
Acanthamoeba Polyphaga ◽  
Culture Methods ◽  
Content Type ◽  
Conventional Culture ◽  
Low Concentrations ◽  
Genetic Specificity

ABSTRACTLow concentrations ofCampylobacter jejunicells in environmental samples make them difficult to study with conventional culture methods. Here, we show that enrichment by amoeba cocultures works well with low-concentration samples and that this method can be combined with molecular techniques without loss of genetic specificity.

scholarly journals Effects of equal channel angular pressing and heat treatments on the microstructures and mechanical properties of selective laser melted and cast AlSi10Mg alloys

2021 ◽  
Vol 21 (3) ◽  
Author(s):  
Przemysław Snopiński ◽  
Mariusz Król ◽  
Marek Pagáč ◽  
Jana Petrů ◽  
Jiří Hajnyš ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Equal Channel Angular Pressing ◽  
Heat Treatments ◽  
Electron Backscattered Diffraction ◽  
Angular Pressing ◽  
Low Temperature Annealing ◽  
Transmission Electron ◽  
Before And After ◽  
The Impact

AbstractThis study investigated the impact of the equal channel angular pressing (ECAP) combined with heat treatments on the microstructure and mechanical properties of AlSi10Mg alloys fabricated via selective laser melting (SLM) and gravity casting. Special attention was directed towards determining the effect of post-fabrication heat treatments on the microstructural evolution of AlSi10Mg alloy fabricated using two different routes. Three initial alloy conditions were considered prior to ECAP deformation: (1) as-cast in solution treated (T4) condition, (2) SLM in T4 condition, (3) SLM subjected to low-temperature annealing. Light microscopy, transmission electron microscopy, X-ray diffraction line broadening analysis, and electron backscattered diffraction analysis were used to characterize the microstructures before and after ECAP. The results indicated that SLM followed by low-temperature annealing led to superior mechanical properties, relative to the two other conditions. Microscopic analyses revealed that the partial-cellular structure contributed to strong work hardening. This behavior enhanced the material’s strength because of the enhanced accumulation of geometrically necessary dislocations during ECAP deformation.

scholarly journals The impact of environmental variables on the spread of COVID-19 in the Republic of Korea

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yong Kwan Lim ◽  
Oh Joo Kweon ◽  
Hye Ryoun Kim ◽  
Tae-Hyoung Kim ◽  
Mi-Kyung Lee
Keyword(s):  
Environmental Factors ◽  
Virus Disease ◽  
Environmental Parameters ◽  
Environmental Data ◽  
Republic Of Korea ◽  
Metropolitan Region ◽  
Health Concern ◽  
Ozone Level ◽  
The Republic ◽  
The Impact

AbstractCorona virus disease 2019 (COVID-19) has been declared a global pandemic and is a major public health concern worldwide. In this study, we aimed to determine the role of environmental factors, such as climate and air pollutants, in the transmission of COVID-19 in the Republic of Korea. We collected epidemiological and environmental data from two regions of the Republic of Korea, namely Seoul metropolitan region (SMR) and Daegu-Gyeongbuk region (DGR) from February 2020 to July 2020. The data was then analyzed to identify correlations between each environmental factor with confirmed daily COVID-19 cases. Among the various environmental parameters, the duration of sunshine and ozone level were found to positively correlate with COVID-19 cases in both regions. However, the association of temperature variables with COVID-19 transmission revealed contradictory results when comparing the data from SMR and DGR. Moreover, statistical bias may have arisen due to an extensive epidemiological investigation and altered socio-behaviors that occurred in response to a COVID-19 outbreak. Nevertheless, our results suggest that various environmental factors may play a role in COVID-19 transmission.

Study on the Dyeing Behavior of Wool Fiber Treated with Nano-SiO2/Ag Antibacterial Agent

2011 ◽  
Vol 332-334 ◽  
pp. 27-30 ◽  
Author(s):  
Mei Niu ◽  
Zi Lu Wu ◽  
Jin Ming Dai ◽  
Wen Sheng Hou ◽  
Sheng Shi ◽  
...  
Keyword(s):  
Low Temperature ◽  
Antibacterial Agent ◽  
Important Influence ◽  
Wool Fiber ◽  
Experimental Results ◽  
Ultrasonic Frequency ◽  
Acid Dyes ◽  
Nano Sio2 ◽  
Dyeing Process ◽  
The Impact

Wool fiber was firstly pretreated by nano-SiO2/Ag antibacterial agent, and then dyed with an acid dyes at low temperature by ultrasonic dyeing. Many factors had an important influence on the dye ability and the antibacterial behavior during the dyeing process of antibacterial wool fiber. The experimental results indicate that the dye-takeup rates of antibacterial wool fiber were enhanced with the increase of the concentration of nano-SiO2/Ag, the dyeing temperature, the dyeing time and the ultrasonic frequency (less than 60Hz). However, the antibacterial ratios of wool fiber were declined in the impact of these factors other than the concentration of antibacterial agent.

Low Temperature Pre-Epi Treatment: Critical Parameters to Control Interface Contamination

2009 ◽  
Vol 145-146 ◽  
pp. 177-180 ◽  
Author(s):  
Roger Loo ◽  
Andriy Hikavyy ◽  
Frederik E. Leys ◽  
Masayuki Wada ◽  
Kenichi Sano ◽  
...  
Keyword(s):  
Low Temperature ◽  
Sige Layer ◽  
Ex Situ ◽  
Critical Parameters ◽  
Process Equipment ◽  
Successful Implementation ◽  
Lifetime Measurements ◽  
Deposition Processes ◽  
Cleaning Methods ◽  
The Impact

Several device concepts have been further evaluated after the successful implementation of epitaxial Si, SiGe and/or Si:C layers. Most of the next device generations will put limitations on the thermal budget of the deposition processes without making concessions on the epitaxial layer quality. In this work we address the impact of ex-situ wet chemical cleans and in-situ pre-epi bake steps, which are required to obtain oxide free Si surfaces for epitaxial growth. The combination of defect measurements, Secondary Ion Mass Spectroscopy, photoluminescence, lifetime measurements, and electrical diode characterization gives a very complete overview of the performance of low-temperature pre-epi cleaning methods. Contamination at the epi/substrate interface cannot be avoided if the pre-epi bake temperature is too low. This interface contamination is traceable by the photoluminescence and lifetime measurements. It may affect device characteristics by enhanced leakage currents and eventually by yield issues due to SiGe layer relaxation or other defect generation. A comparison of state of the art 200 mm and 300 mm process equipment indicates that for the same thermal budgets the lowest contamination levels are obtained for the 300 mm equipments.

scholarly journals The Impact of Sampling Season and Catching Site (Wild and Aquaculture) on Gut Microbiota Composition and Diversity of Nile Tilapia (Oreochromis niloticus)

Biology ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 180
Author(s):  
Negash Kabtimer Bereded ◽  
Getachew Beneberu Abebe ◽  
Solomon Workneh Fanta ◽  
Manuel Curto ◽  
Herwig Waidbacher ◽  
...  
Keyword(s):  
Gut Microbiota ◽  
Nile Tilapia ◽  
Alpha Diversity ◽  
Environmental Parameters ◽  
Illumina Miseq ◽  
Microbial Composition ◽  
Lake Tana ◽  
Future Work ◽  
The Impact ◽  
Sampling Season

The gut microbiota of fishes is known to play an essential role in diverse aspects of host biology. The gut microbiota of fish is affected by various environmental parameters, including temperature changes, salinity and diet. Studies of effect of environment on gut microbiota enables to have a further understanding of what comprises a healthy microbiota under different environmental conditions. However, there is insufficient understanding regarding the effects of sampling season and catching site (wild and aquaculture) on the gut microbiota of Nile tilapia. This study characterised gut microbial composition and diversity from samples collected from Lake Tana and the Bahir Dar aquaculture facility centre using 16S rDNA Illumina MiSeq platform sequencing. Firmicutes and Fusobacteria were the most dominant phyla in the Lake Tana samples, while Proteobacteria was the most dominant in the aquaculture samples. The results of differential abundance testing clearly indicated significant differences for Firmicutes, Fusobacteria, Bacteroidetes and Cyanobacteria across sampling months. However, Proteobacteria, Chloroflexi, Fusobacteria and Cyanobacteria were significantly enriched in the comparison of samples from the Lake Tana and aquaculture centre. Significant differences were observed in microbial diversity across sampling months and between wild and captive Nile tilapia. The alpha diversity clearly showed that samples from the aquaculture centre (captive) had a higher diversity than the wild Nile tilapia samples from Lake Tana. The core gut microbiota of all samples of Nile tilapia used in our study comprised Firmicutes, Proteobacteria and Fusobacteria. This study clearly showed the impact of sampling season and catching site (wild and aquaculture) on the diversity and composition of bacterial communities associated with the gut of Nile tilapia. Overall, this is the first study on the effects of sampling season and catching site on the gut microbiota of Nile tilapia in Ethiopia. Future work is recommended to precisely explain the causes of these changes using large representative samples of Nile tilapia from different lakes and aquaculture farms.

scholarly journals Human Adipose-Derived Stromal/Stem Cell Culture and Analysis Methods for Adipose Tissue Modeling In Vitro: A Systematic Review

Cells ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1378
Author(s):  
Peyton Gibler ◽  
Jeffrey Gimble ◽  
Katie Hamel ◽  
Emma Rogers ◽  
Michael Henderson ◽  
...  
Keyword(s):  
Systematic Review ◽  
Adipose Tissue ◽  
Drug Discovery ◽  
3D Culture ◽  
Human Adipose Tissue ◽  
Culture Methods ◽  
Adipose Tissue Engineering ◽  
The Impact

Human adipose-derived stromal/stem cells (hASC) are widely used for in vitro modeling of physiologically relevant human adipose tissue. These models are useful for the development of tissue constructs for soft tissue regeneration and 3-dimensional (3D) microphysiological systems (MPS) for drug discovery. In this systematic review, we report on the current state of hASC culture and assessment methods for adipose tissue engineering using 3D MPS. Our search efforts resulted in the identification of 184 independent records, of which 27 were determined to be most relevant to the goals of the present review. Our results demonstrate a lack of consensus on methods for hASC culture and assessment for the production of physiologically relevant in vitro models of human adipose tissue. Few studies have assessed the impact of different 3D culture conditions on hASC adipogenesis. Additionally, there has been a limited use of assays for characterizing the functionality of adipose tissue in vitro. Results from this study suggest the need for more standardized culture methods and further analysis on in vitro tissue functionality. These will be necessary to validate the utility of 3D MPS as an in vitro model to reduce, refine, and replace in vivo experiments in the drug discovery regulatory process.

Sign in / Sign up

Export Citation Format

Share Document