scholarly journals Seed Priming with Carbon Nanomaterials to Modify the Germination, Growth, and Antioxidant Status of Tomato Seedlings

Agronomy ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 639 ◽  
Author(s):  
Elsy Rubisela López-Vargas ◽  
Yolanda González-García ◽  
Marissa Pérez-Álvarez ◽  
Gregorio Cadenas-Pliego ◽  
Susana González-Morales ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Root Biomass ◽  
Carbon Nanomaterials ◽  
Germination Rate ◽  
Seed Priming ◽  
Shoot Biomass ◽  
Negative Effects ◽  
Tomato Seed ◽  
Tomato Crop ◽  
Tomato Seedlings

The objective of this work was to determine the responses of tomato seed priming with CNMs (carbon nanomaterials), evaluating the changes in germination and biochemical compounds as well as the effect on the growth of tomato seedlings. Five concentrations of CNMs (10, 100, 250, 500, and 1000 mg L−1) were evaluated, as well as an absolute control and a sonicated control. The results showed that seed priming with CNMs did not affect the germination rate of the tomato seeds; however, it negatively affected the vigor variables, such as the root length (up to 39.2%) and hypocotyl biomass (up to 33%). In contrast, the root biomass was increased by the application of both carbon nanotubes and graphene up to 127% in the best case. Seed priming with carbon nanotubes (1000 mg L−1) decreased the plant height (29%), stem diameter (20%), fresh shoot biomass (63%), fresh root biomass (63%), and dry shoot biomass (71%). Seed priming with graphene increased the content of chlorophylls (up to 111%), vitamin C (up to 78%), β-carotene (up to 11 fold), phenols (up to 85%), and flavonoids (up to 45%), as well as the H2O2 content (up to 215%). Carbon nanotubes (CNTs) increased the enzymatic activity (phenylalanine ammonia lyase (PAL), ascorbate peroxidase (APX), glutathione peroxidase (GPX), superoxide dismutase (SOD), and catalase (CAT). In addition, seed priming with high concentrations of CNMs showed negative effects. Seed priming with carbon nanomaterials can potentially improve the development of the tomato crop; therefore, this technique can be used to induce biostimulation and provides an easy way to apply carbon nanomaterials.

scholarly journals Impact of Carbon Nanomaterials on the Antioxidant System of Tomato Seedlings

2019 ◽  
Vol 20 (23) ◽  
pp. 5858 ◽  
Author(s):  
Yolanda González-García ◽  
Elsy Rubisela López-Vargas ◽  
Gregorio Cadenas-Pliego ◽  
Adalberto Benavides-Mendoza ◽  
Susana González-Morales ◽  
...  
Keyword(s):  
Carbon Nanomaterials ◽  
Good Alternative ◽  
Stress Factors ◽  
Root Weight ◽  
Biotic And Abiotic Stress ◽  
Tomato Crop ◽  
Antioxidant Responses ◽  
Tomato Seedlings ◽  
Abiotic Stress Factors ◽  
Carbon Based Nanomaterials

Tomato is one of the most economically important vegetables worldwide and is constantly threatened by various biotic and abiotic stress factors reducing the quality and quantity in the production of this crop. As an alternative to mitigate stress in plants, carbon nanomaterials (CNMs) have been used in agricultural areas. Therefore, the objective of the present work was to evaluate the antioxidant responses of tomato seedlings to the application via foliar and drench of carbon nanotubes (CNTs) and graphene (GP). Different doses (10, 50, 100, 250, 500, and 1000 mg L−1) and a control were evaluated. The results showed that the fresh and dry root weight increased with the application of CNMs. Regarding the antioxidant responses of tomato seedlings, the application of CNMs increased the content of phenols, flavonoids, ascorbic acid, glutathione, photosynthetic pigments, activity of the enzyme’s ascorbate peroxidase, glutathione peroxidase, catalase, and phenylalanine ammonia lyase as well as the content of proteins. Therefore, the use of carbon-based nanomaterials could be a good alternative to induce tolerance to different stress in tomato crop.

scholarly journals Responses of Seed Germination, Seedling Growth, and Seed Yield Traits to Seed Pretreatment in Maize (Zea maysL.)

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Yu Tian ◽  
Bo Guan ◽  
Daowei Zhou ◽  
Junbao Yu ◽  
Guangdi Li ◽  
...  
Keyword(s):  
Seed Germination ◽  
Seed Yield ◽  
Seedling Growth ◽  
Germination Rate ◽  
Seed Priming ◽  
Grain Weight ◽  
Shoot Biomass ◽  
Control Group ◽  
Yield Traits ◽  
Seed Pretreatment

A series of seed priming experiments were conducted to test the effects of different pretreatment methods to seed germination, seedling growth, and seed yield traits in maize (Zea maysL.). Results indicated that the seeds primed by gibberellins (GA), NaCl, and polyethylene glycol (PEG) reagents showed a higher imbibitions rate compared to those primed with water. The final germination percentage and germination rate varied with different reagents significantly (P<0.05). The recommended prime reagents were GA at 10 mg/L, NaCl at 50 mM, and PEG at 15% on account of germination experiment. 15% PEG priming reagent increased shoot and root biomass of maize seedling. The shoot biomass of seedlings after presoaking the seeds with NaCl reagent was significantly higher than the seedlings without priming treatment. No significant differences of plant height, leaf number, and hundred-grain weight were observed between control group and priming treatments. Presoaking with water, NaCl (50 mM), or PEG (15%) significantly increased the hundred-grain weight of maize. Therefore, seed pretreatment is proved to be an effective technique to improve the germination performance, seedling growth, and seed yield of maize. However, when compared with the two methods, if immediate sowing is possible, presoaking is recommended to harvest better benefits compared to priming method.

scholarly journals Evaluation of IAA and GA3 producing yeast isolates on growth of tomato crop by spraying under green house

2021 ◽  
Vol 17 (AAEBSSD) ◽  
pp. 273-276
Author(s):  
M. Yallappa ◽  
B.C. Mallesha ◽  
K.R. Rekha ◽  
M. Swathi
Keyword(s):  
Plant Height ◽  
Root Length ◽  
Root Biomass ◽  
Plant Root ◽  
Shoot Biomass ◽  
Tomato Crop ◽  
Green House ◽  
Number Of Leaves ◽  
Number Of Branches ◽  
Fresh Root

A green house experiment was carried out at Department of Agricultural Microbiology, GKVK, Bengaluru by use of IAA (MZL -8 and TCL -1) and GA3 (CAL – 1 and ACL- 3) producing yeast isolates on growth of tomato crop by spraying method with 8 treatments and 3 replication. The highest plant height, number of leaves per plant, number of branches per plant, root length, fresh shoot biomass, dry shoot biomass, fresh root biomass, dry root biomass, IAA and GA3 content, 44.73 cm, 80, 11.40, 14.70 cm, 24.00 g/plant, 11.75 g/plant, 7.98 g/plant, 3.91 g/plant, 1.205 μg/g of leaf and 0.550 μg/g of leaf, respectively by the yeast isolate TCL -1.The least plant height, number of leaves per plant, number of branches per plant, root length, fresh shoot biomass, dry shoot biomass, fresh root biomass, dry root biomass, IAA and GA3 content, 22.20 cm, 55.70, 8.00,9.00 cm, 11.00 g/plant, 6.23 g/plant, 3.67 g/plant, 2.07 g/plant, 0.384 μg/g of leaf and 0.200 μg/g of leaf, respectively was recorded by control (T1) treatment at 50 DAT.

scholarly journals Emergence, Growth, and Freezing Tolerance of Tomato Seedlings Grown from Uniconazole-treated Seed

HortScience ◽  
1990 ◽  
Vol 25 (3) ◽  
pp. 312-313
Author(s):  
Tim D. Davis ◽  
James E. Ells ◽  
Ronald H. Walser
Keyword(s):  
Lycopersicon Esculentum ◽  
Freezing Tolerance ◽  
Seed Priming ◽  
Seedling Height ◽  
Tomato Seed ◽  
Untreated Seed ◽  
Control Seed ◽  
Tomato Seedlings ◽  
Treated Seed ◽  
Freeze Damage

Seeds of Lycopersicon esculentum Mill. cv. UC 82L were treated with hypertonic priming solutions containing KNO3 and K3PO4(10 g·liter-1 each), and various concentrations of uniconazole before sowing. Treatment of the seed with priming solution only hastened emergence by ≈ 2 days compared to untreated seed sown directly from the packet, but did not affect total emergence after 12 days. Addition of uniconazole to the priming solution had no significant effect on speed of emergence or total emergence after 12 days compared to the primed control. Seed priming plus uniconazole at 1 or 10 mg·liter-1 reduced seedling height after 2 weeks by ≈ 20% compared to the primed control. Uniconazole had no effect on the mortality of either hardened or nonhardened seedlings exposed to below-freezing temperatures for 3 hr. These data suggest that treatment of tomato seed with hypertonic solutions containing uniconazole would be of little practical value in protecting seedlings from freeze damage. Chemical names used: (E)-1-(4-chlorophenyl)-4,4-dimethyl-2-(1,2,4-triazol-yl)penten-3-ol (uniconazole).

scholarly journals Green house evaluation of IAA and GA3 producing yeast isolates on growth tomato crop by root dip method

2021 ◽  
Vol 17 (AAEBSSD) ◽  
pp. 262-265
Author(s):  
M. Yallappa ◽  
B.C. Mallesha ◽  
K.R. Rekha ◽  
M. Swathi
Keyword(s):  
Plant Height ◽  
Root Length ◽  
Root Biomass ◽  
Plant Root ◽  
Shoot Biomass ◽  
Tomato Crop ◽  
Green House ◽  
Number Of Leaves ◽  
Number Of Branches ◽  
Fresh Root

A green house experiment was conduct by use of IAA (MZL -8 and TCL -1) and GA3 (CAL – 1 and ACL- 3) producing yeast isolates on growth of tomato crop by root dip method with 8 treatments and 3 replication at Department of Agricultural Microbiology, GKVK, Bengaluru. The yeastisolate TCL -1 recorded maximum plant height, number of leaves per plant, number of branches per plant, root length, fresh shoot biomass, dry shoot biomass, fresh root biomass, dry root biomass, IAA and GA3 content, 44.73 cm, 80, 11.40, 14.70 cm, 24.00 g/plant, 11.75 g/plant, 7.98 g/plant, 3.91 g/plant, 1.205 μg/g of leaf and 0.550 μg/g of leaf respectively. The control (T1) recorded Lowest plant height, number of leaves per plant, number of branches per plant, root length, fresh shoot biomass, dry shoot biomass, fresh root biomass, dry root biomass, IAA and GA3 content, 22.20 cm, 55.70, 8.00,9.00 cm, 11.00 g/plant, 6.23 g/plant, 3.67 g/plant, 2.07 g/plant, 0.384 μg/g of leaf and 0.200 μg/g of leaf respectively at 50 DAT.

scholarly journals Growth Responses of Boreal Scots Pine, Norway Spruce and Silver Birch Seedlings to Simulated Climate Warming over Three Growing Seasons in a Controlled Field Experiment

Forests ◽  
2020 ◽  
Vol 11 (9) ◽  
pp. 943
Author(s):  
Katri Nissinen ◽  
Virpi Virjamo ◽  
Antti Kilpeläinen ◽  
Veli-Pekka Ikonen ◽  
Laura Pikkarainen ◽  
...  
Keyword(s):  
Norway Spruce ◽  
Scots Pine ◽  
Root Biomass ◽  
Growing Season ◽  
Silver Birch ◽  
Shoot Biomass ◽  
Growth Responses ◽  
Growing Seasons ◽  
Simulated Climate ◽  
Shoot And Root Biomass

We studied the growth responses of boreal Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies L. Karst.) and silver birch (Betula pendula Roth) seedlings to simulated climate warming of an average of 1.3 °C over the growing season in a controlled field experiment in central Finland. We had six replicate plots for elevated and ambient temperature for each tree species. The warming treatment lasted for the conifers for three growing seasons and for the birch two growing seasons. We measured the height and diameter growth of all the seedlings weekly during the growing season. The shoot and root biomass and their ratios were measured annually in one-third of seedlings harvested from each plot in autumn. After two growing seasons, the height, diameter and shoot biomass were 45%, 19% and 41% larger in silver birch seedlings under the warming treatment, but the root biomass was clearly less affected. After three growing seasons, the height, diameter, shoot and root biomass were under a warming treatment 39, 47, 189 and 113% greater in Scots pine, but the root:shoot ratio 29% lower, respectively. The corresponding responses of Norway spruce to warming were clearly smaller (e.g., shoot biomass 46% higher under a warming treatment). As a comparison, the relative response of height growth in silver birch was after two growing seasons equal to that measured in Scots pine after three growing seasons. Based on our findings, especially silver birch seedlings, but also Scots pine seedlings benefitted from warming, which should be taken into account in forest regeneration in the future.

scholarly journals Using seed respiration as a tool for calculating optimal soaking times for ‘on-farm’ seed priming of barley (Hordeum vulgare)

2021 ◽  
pp. 1-9
Author(s):  
Javier Carrillo-Reche ◽  
Adrian C. Newton ◽  
Richard S. Quilliam
Keyword(s):  
Morphological Changes ◽  
Low Cost ◽  
Germination Rate ◽  
Seed Priming ◽  
Embryonic Axes ◽  
Seedling Vigour ◽  
Soaking Time ◽  
On Farm ◽  
Seed Respiration

Abstract A low-cost technique named ‘on-farm’ seed priming is increasingly being recognized as an effective approach to maximize crop establishment. It consists of anaerobically soaking seeds in water before sowing resulting in rapid and uniform germination, and enhanced seedling vigour. The extent of these benefits depends on the soaking time. The current determination of optimal soaking time by germination assays and mini-plot trials is resource-intensive, as it is species/genotype-specific. This study aimed to determine the potential of the seed respiration rate (an indicator of metabolic activity) and seed morphological changes during barley priming as predictors of the priming benefits and, thus, facilitate the determination of optimal soaking times. A series of germination tests revealed that the germination rate is mostly attributable to the rapid hydration of embryo tissues, as the highest gains in the germination rate occurred before the resumption of respiration. Germination uniformity, however, was not significantly improved until seeds were primed for at least 8 h, that is, after a first respiration burst was initiated. The maximum seedling vigour was attained when the priming was stopped just before the beginning of the differentiation of embryonic axes (20 h) after which vigour began to decrease (‘over-priming’). The onset of embryonic axis elongation was preceded by a second respiration burst, which can be used as a marker for priming optimization. Thus, monitoring of seed respiration provides a rapid and inexpensive alternative to the current practice. The method could be carried out by agricultural institutions to provide recommended optimal soaking times for the common barley varieties within a specific region.

scholarly journals Zinc Seed Priming Improves Spinach Germination at Low Temperature

Agriculture ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 271
Author(s):  
Muhammad Imran ◽  
Asim Mahmood ◽  
Günter Neumann ◽  
Birte Boelt
Keyword(s):  
Low Temperature ◽  
Temperature Stress ◽  
Multispectral Imaging ◽  
Germination Rate ◽  
Cost Effective ◽  
Seed Priming ◽  
Seedling Development ◽  
Low Temperature Stress ◽  
Early Seedling ◽  
Early Seedling Development

Low temperature during germination hinders germination speed and early seedling development. Zn seed priming is a useful and cost-effective tool to improve germination rate and resistance to low temperature stress during germination and early seedling development. Spinach was tested to improve germination and seedling development with Zn seed priming under low temperature stress conditions. Zn priming increased seed Zn concentration up to 48 times. The multispectral imaging technique with VideometerLab was used as a non-destructive method to differentiate unprimed, water- and Zn-primed spinach seeds successfully. Localization of Zn in the seeds was studied using the 1,5-diphenyl thiocarbazone (DTZ) dying technique. Active translocation of primed Zn in the roots of young seedlings was detected with laser confocal microscopy. Zn priming of spinach seeds at 6 mM Zn showed a significant increase in germination rate and total germination under low temperature at 8 °C.

scholarly journals Accelerating Seed Germination and Juvenile Growth of Sorghum (Sorghum bicolor L. Moench) to Manage Climate Variability through Hydro-Priming

Atmosphere ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 419
Author(s):  
Siaka Dembélé ◽  
Robert B. Zougmoré ◽  
Adama Coulibaly ◽  
John P. A. Lamers ◽  
Jonathan P. Tetteh
Keyword(s):  
Seed Germination ◽  
Climate Variability ◽  
Germination Rate ◽  
Dry Weight ◽  
Seed Priming ◽  
Seedling Development ◽  
Hot Water ◽  
Crop Failure ◽  
Simple Method ◽  
Early Season

Agriculture in Mali, a country in Sahelian West Africa, strongly depends on rainfall and concurrently has a low adaptive capacity, making it consequently one of the most vulnerable regions to climate change worldwide. Since early-season drought limits crop germination, and hence growth, ultimately yield during rain-fed depending on production is commonly experienced nowadays in Mali. Germination and establishment of key crops such as the staple sorghum could be improved by seed priming. The effects of hydro-priming with different water sources (e.g., distilled, tap, rain, river, well water) were evaluated respectively for three priming time durations in tepid e.g., at 25 °C (4, 8, and 12 h) and by hot water at 70 °C (in contrast to 10, 20, and 30 min.) in 2014 and 2015. Seed germination and seedling development of nine sorghum genotypes were monitored. Compared to non-primed seed treatments, hydro-priming significantly [p = 0.01] improved final germination percentage, germination rate index, total seedling length, root length, root vigor index, shoot length, and seedling dry weight. The priming with water from wells and rivers resulted in significant higher seed germination (85%) and seedling development, compared to the three other sources of water. Seed germination rate, uniformity, and speed were enhanced by hydro-priming also. It is argued that hydro-priming is a safe and simple method that effectively improve seed germination and seedling development of sorghum. If used in crop fields, the above most promising genotypes may contribute to managing early season drought and avoid failure of seed germination and crop failure in high climate variability contexts.

Sign in / Sign up

Export Citation Format

Share Document