scholarly journals The Influence of Copper and Silver Nanocolloids on the Quality of Pressed Spring Rapeseed Oil

Agronomy ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 643 ◽  
Author(s):  
Kachel ◽  
Matwijczuk ◽  
Sujak ◽  
Czernel ◽  
Niemczynowicz ◽  
...  

The aim of this study was to evaluate the quality of virgin oil pressed from spring rape seeds cultivated with the use of colloidal nanosilver and nanocopper solutions for processing seeds and as foliar fertilizer. The results show that the use of nanometals for seed processing and foliar fertilization increased the content of carotenoid pigments in the oil. The pigment concentration was higher compared to oil pressed from control seeds. The application of nanocolloids onto the seeds and subsequently on the growing plants contributed to the increase of the oxidative stability of oils. Both the acid number (AN) and peroxide number (PN) values were higher in the studied oils as compared to the control, but did not exceed the required allowable levels. Increased content of silver ions and slightly increased copper content was observed in the pressed oil. An infrared spectral analysis (Fourier-Transformed Infra-Red) conducted in combination with chemometrics allowed the classification of the studied oils in terms of their chemical composition. The analysis revealed the presence of bands characteristic of Cu-O-H vibrations after soaking the seeds and spraying the plants with copper nanocolloid, and of C-O-Ag after fertilization with silver nanocolloid.

1998 ◽  
Vol 2 ◽  
pp. 115-122
Author(s):  
Donatas Švitra ◽  
Jolanta Janutėnienė

In the practice of processing of metals by cutting it is necessary to overcome the vibration of the cutting tool, the processed detail and units of the machine tool. These vibrations in many cases are an obstacle to increase the productivity and quality of treatment of details on metal-cutting machine tools. Vibration at cutting of metals is a very diverse phenomenon due to both it’s nature and the form of oscillatory motion. The most general classification of vibrations at cutting is a division them into forced vibration and autovibrations. The most difficult to remove and poorly investigated are the autovibrations, i.e. vibrations arising at the absence of external periodic forces. The autovibrations, stipulated by the process of cutting on metalcutting machine are of two types: the low-frequency autovibrations and high-frequency autovibrations. When the low-frequency autovibration there appear, the cutting process ought to be terminated and the cause of the vibrations eliminated. Otherwise, there is a danger of a break of both machine and tool. In the case of high-frequency vibration the machine operates apparently quiently, but the processed surface feature small-sized roughness. The frequency of autovibrations can reach 5000 Hz and more.


2020 ◽  
Vol 45 (4) ◽  
pp. 794-801
Author(s):  
Caroline Oliveira Andrino ◽  
Marcelo Fragomeni Simon ◽  
Jair Eustáquio Quintino Faria ◽  
André Luiz da Costa Moreira ◽  
Paulo Takeo Sano

Abstract—We describe and illustrate Paepalanthus fabianeae, a new species of Eriocaulaceae from the central portion of the Espinhaço Range in Minas Gerais, Brazil. Previous phylogenetic evidence based on analyses of nuclear (ITS and ETS) and plastid (trnL-trnF and psba-trnH) sequences revealed P. fabianeae as belonging to a strongly supported and morphologically coherent clade containing five other species, all of them microendemic, restricted to the Espinhaço range. Due to the infrageneric classification of Paepalanthus being highly artificial, we preferred not assigning P. fabianeae to any infrageneric group. Paepalanthus fabianeae is known from two populations growing in campos rupestres (highland rocky fields) in the meridional Espinhaço Range. The species is characterized by pseudodichotomously branched stems, small, linear, recurved, and reflexed leaves, urceolate capitula, and bifid stigmas. Illustrations, photos, the phylogenetic position, and a detailed description, as well as comments on habitat, morphology, and affinities with similar species are provided. The restricted area of occurrence allied with threats to the quality of the habitat, mainly due to quartzite mining, justifies the preliminary classification of the new species in the Critically Endangered (CR) category using the guidelines and criteria of the IUCN Red List.


2020 ◽  
Vol 6 (3) ◽  
pp. 158-164
Author(s):  
Navruza Yakhyayeva ◽  

The quality and content of information in the article media text is based on scientific classification of linguistic features. The study of functional styles of speech, the identification of their linguistic signs, the discovery of the functional properties of linguistic units and their separation on the basis of linguistic facts is one of thetasks that modern linguistics is waiting for a solution. Text Linguistics, which deals with the creation, modeling of its structure and the study of the process of such activity, is of interest to journalists today as a science.


2019 ◽  
pp. 86-88
Author(s):  
R. H. Batirova ◽  
S. S. Tashpulatov ◽  
I. V. Cherunova ◽  
M. A. Mansurova ◽  
S. L. Matismailov
Keyword(s):  

2018 ◽  
Vol 3 (1) ◽  
pp. 1-8
Author(s):  
Desy Damayanti ◽  
Adin Fauzi ◽  
Azizatul Mahfida Inayati

Among some components of effective language classroom, learning materials indisputably play a focal role. They improve the quality of language teaching; facilitate teachers in doing their duties, and lead students to a higher level of understanding in learning. This research aims to discuss the notion of materials in language teaching. It made use of works of literature to outline the importance of materials in language teaching, and to analyze kinds of materials, which are relevant to language teaching. The analysis resulted in the classification of materials into two broad categories namely (1) created materials, which include course book, audio materials, and video materials; and (2) authentic materials, which cover authentic texts, movie/film, radio broadcasting, television program, graphs, maps, tables, and charts. This paper serves as an invaluable resource to facilitate language teachers in selecting appropriate materials for effective language teaching.


2018 ◽  
Vol 77 (4) ◽  
pp. 211-217 ◽  
Author(s):  
P. N. Pulatov

Current geopolitical and economic conditions for the functioning of railway transport in most post-Soviet states are such that it is extremely difficult to provide required quality of transport services and break-even operations at high expenses for maintaining the railway infrastructure and rolling stock. Dynamics of transportation of the Tajik Railway (TSR) is shown, which displays that most of its sections are classified as low-intensity ones. The paper proposes methodical principles, setting and qualitative analysis of the task of rationalization of operational work and organization of car flows for international transportation, taking into account the specifics of the Tajik Railway. There is a problem of complex maintenance of the efficiency of operational work in modern conditions based on the synthesis of the tasks of self-management (rational internal operational technology of the Tajik Railway) and coordination tasks (technological interaction with railway administrations of other states). Author substantiated the necessity of solving this problem. Proposed classification of technological restrictions and controlled variables in the performance of transport takes into account methods for changing external conditions for the functioning of the railway landfill and methods for increasing internal efficiency of its operation. The search for the solution of the problem involves direct search of variants along its ordered set with clipping of groups of variants that do not correspond to constraints, with the subsequent finding of compromise control over a set of effective alternatives.


2021 ◽  
Vol 16 (1) ◽  
Author(s):  
F. Haubner ◽  
A. Schneider ◽  
H. Schinke ◽  
M. Bertlich ◽  
B. G. Weiss ◽  
...  

Abstract Background Recurrent spontaneous epistaxis is the most common clinical manifestation and the most debilitating symptom in hereditary haemorrhagic telangiectasia (HHT) patients. To this date, there exist only a classification of HHT patients by different genetic mutations. There is no standard classification for the mucocutaneous endonasal manifestations of HHT. The aim of the present study was to document the variety of endonasal HHT lesions using digital microscopy and to propose a clinical classification. Methods We recorded the endonasal HHT lesions of 28 patients using a digital microscope. We reconstructed the 3D images und videos recorded by digital microscope afterwards and classified the endonasal lesions of HHT in two classes: Grade A, presence of only flat telangiectasias in the mucosa level and Grade B, (additional) presence of raised berry or wart-like telangiectasia spots. We investigated also Haemoglobin level by routine laboratory procedures, plasma VEGF level by ELISA, Severity of epistaxis by epistaxis severity score (ESS) and quality of life by a linear visual analogue scale (VAS). Results We found a higher quality of life and a lower severity of epistaxis in Grade A patients in comparison to Grade B patients. No difference in plasma VEGF level and in Haemoglobin between Grad A patients and Grade B patients could be detected. Plasma VEGF levels showed no gender specific differences. It could also not be correlated to the extranasal manifestation. Conclusion The classification for endonasal manifestation of HHT proposed in this study indicates severity of epistaxis und quality of life. Digital microscopy with the ability of 3D reconstruction of images presents a useful tool for such classifications. The classification of endonasal HHT lesions using digital microscopy allows to evaluate the dynamic of HHT lesions in the course of time independent of examiner. This allows also to evaluate the efficacy of the different treatment modalities by dynamic of HHT lesions. Moreover digital microscopy is very beneficial in academic teaching of rare diseases.


Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 916 ◽  
Author(s):  
Wen Cao ◽  
Chunmei Liu ◽  
Pengfei Jia

Aroma plays a significant role in the quality of citrus fruits and processed products. The detection and analysis of citrus volatiles can be measured by an electronic nose (E-nose); in this paper, an E-nose is employed to classify the juice which is stored for different days. Feature extraction and classification are two important requirements for an E-nose. During the training process, a classifier can optimize its own parameters to achieve a better classification accuracy but cannot decide its input data which is treated by feature extraction methods, so the classification result is not always ideal. Label consistent KSVD (L-KSVD) is a novel technique which can extract the feature and classify the data at the same time, and such an operation can improve the classification accuracy. We propose an enhanced L-KSVD called E-LCKSVD for E-nose in this paper. During E-LCKSVD, we introduce a kernel function to the traditional L-KSVD and present a new initialization technique of its dictionary; finally, the weighted coefficients of different parts of its object function is studied, and enhanced quantum-behaved particle swarm optimization (EQPSO) is employed to optimize these coefficients. During the experimental section, we firstly find the classification accuracy of KSVD, and L-KSVD is improved with the help of the kernel function; this can prove that their ability of dealing nonlinear data is improved. Then, we compare the results of different dictionary initialization techniques and prove our proposed method is better. Finally, we find the optimal value of the weighted coefficients of the object function of E-LCKSVD that can make E-nose reach a better performance.


2021 ◽  
Vol 733 (1) ◽  
pp. 012005
Author(s):  
Y Hendrawan ◽  
R Utami ◽  
D Y Nurseta ◽  
Daisy ◽  
S Nuryani ◽  
...  

2020 ◽  
Vol 79 (Suppl 1) ◽  
pp. 861-862
Author(s):  
Z. Izadi ◽  
T. Johansson ◽  
J. LI ◽  
G. Schmajuk ◽  
J. Yazdany

Background:The Rheumatology Informatics System for Effectiveness (RISE) Registry was developed by the ACR to help rheumatologists improve quality of care and meet federal reporting requirements. In the current quality program administered by the U.S. Centers for Medicare and Medicaid services, rheumatologists are scored on quality measures, and performance is tied to financial incentives or penalties. Rheumatoid arthritis (RA)-specific quality measures can only be submitted through RISE to federal programs.Objectives:This study used data from the RISE registry to investigate rheumatologists’ federal reporting patterns on five RA-specific quality measures in 2018 and investigated the effect of practice characteristics on federal reporting of these measures.Methods:We analyzed data on all rheumatologists who continuously participated in RISE between Jan 2017 to Dec 2018 and who had patients eligible for at least one RA-specific measure. Five measures were examined: tuberculosis screening before biologic use, disease activity assessment, functional status assessment, assessment and classification of disease prognosis, and glucocorticoid management. We assessed whether or not rheumatologists reported specific quality measures via RISE. We investigated the effect of practice characteristics (practice structure; number of providers; geographic region) on the likelihood of reporting using adjusted analyses that controlled for measure performance (performance in 2018; change in performance from 2017; and performance relative to national average performance). Analyses accounted for clustering by practice.Results:Data from 799 providers from 207 practices managing 213,757 RA patients was examined. The most common practice structure was a single-specialty group practice (53%), followed by solo (28%) and multi-specialty group practice (12%). Most providers (73%) had patients eligible for all five RA quality measures. Federal reporting of quality measures through RISE varied significantly by provider, ranging from no reporting (60%) to reporting all eligible RA measures (12.2%). Reporting through RISE also varied significantly by quality measure and was highest for functional status assessment (36%) and lowest for assessment and classification of disease prognosis (20%). Small practices (1-4 providers) were more likely to report all eligible RA quality measures compared to larger practices (21%, 6%; p<0.001). In adjusted analyses, solo practices were more likely than single-specialty group practices to report RA measures (42%, 31%; p<0.027) while multispecialty group practices were less likely (18%, 31%; p<0.001). Additionally, higher performance in 2018 and performance ≥ the national average performance was associated with federal reporting of the measures through RISE (p≤0.004).Conclusion:Forty percent of U.S. rheumatologists participating in RISE used the registry for federal quality reporting. Physicians using RISE for reporting were disproportionately in small and solo practices, suggesting that the registry is fulfilling an important role in helping these practices participate in national quality reporting programs. Supporting small practices is especially important given the workforce shortages in rheumatology. We observed that practices reporting through RISE had higher measure performance than other participating practices, which suggests that the registry is facilitating quality improvement. Studies are ongoing to further investigate the impact of federal quality reporting programs and RISE participation on the quality of rheumatologic care in the United States.Disclaimer: This data was supported by the ACR’s RISE Registry. However, the views expressed represent those of the authors, not necessarily those of the ACR.Disclosure of Interests:Zara Izadi: None declared, Tracy Johansson: None declared, Jing Li: None declared, Gabriela Schmajuk Grant/research support from: Pfizer, Jinoos Yazdany Grant/research support from: Pfizer


Sign in / Sign up

Export Citation Format

Share Document