scholarly journals Effects from Fe, P, Ca, Mg, Zn and Cu in Steel Slag on Growth and Metabolite Accumulation of Microalgae: A Review

2021 ◽  
Vol 11 (14) ◽  
pp. 6589
Author(s):  
Tianji Liu ◽  
Yitong Wang ◽  
Junguo Li ◽  
Qing Yu ◽  
Xiaoman Wang ◽  
...  

Steel slag is the solid waste produced by the steelmaking process. At present, there are differences in the treatment and utilization of this waste among countries around the world. The massive accumulation of steel slag not only occupies land, but also the heavy metal elements in steel slag leached by rainwater cause serious pollution to the soil and groundwater, both which threaten the life and survival of the surrounding residents. More and more attention has been paid to the resource utilization of slag because of the gradual promotion of energy saving and emission reduction all over the world. Currently, the fields that utilize slag focus on recycling of steel waste, acting as sinter raw material, dephosphorization of hot metal, road and water conservancy project construction, wastewater treatment material, application of CO2 capture and flue gas desulfurization or agriculture. Many researchers have carried out research and explorations on the effects of slag on microalgae’s growth and found that slag has enormous potential algal biomasses and huge advantages for promoting microalgae’s growth and the accumulation of metabolites. Under suitable conditions, slag can effectively promote microalgae’s growth and reproduction, as well as promote microalgae’s accumulation of metabolites, especially lipid accumulation. Thus, slag can be used as an ideal nutrient for microalgae. Culturing microalgae with slag can lower the cost and solve the problem of lacking Fe during the process of marine microalgae’s growth. Meanwhile, it can alleviate the phenomenon of the substantial stacking of slag. This study provides new methods for slag’s resource utilization.

1927 ◽  
Vol 21 (4) ◽  
pp. 668-684 ◽  
Author(s):  
Wallace McClure

The wave of exaggerated nationalism which has pervaded the nations of the earth generally since the World War has been accompanied by seemingly serious efforts on the part of national governments to arrange for the production within their territorial limits of as many as possible of the articles which their peoples consume, often quite heedless of the cost of home as compared with external production. Such disregard of economic laws could scarcely have failed to aggravate the poverty in which the world was inevitably left in the wake of the war. Political leaders have seemed wholly unmindful of the essential truth of economics, namely, that destruction and waste, the accompaniments of war, cannot be indulged in without a lowering of economic standards, that those standards can only be raised by production, and that recovery is accomplished in the measure that production is achieved at the place and by the methods which make possible the largest output of consumable goods in proportion to the labor and raw material involved.


2011 ◽  
Vol 133 (04) ◽  
pp. 48-48
Author(s):  
Jeffrey Winters

This article analyzes the energy identity crisis in some oil-producing countries. It highlights that the retail price for gasoline in countries such as Libya, Saudi Arabia, Bahrain, and Yemen was at or below the cost on the world market of the petroleum needed to produce it. However, Egypt went from an exporter of more than 300,000 barrels of oil a day in 1999 to a net importer beginning in 2009. And as a consequence, the prices for gasoline in Egypt went from below the raw material cost in 2006 to being comparable to those in the United States. Tunisia shifted from an exporter to an importer in 2000. Thanks to strong consumption growth, Bahrain has also seen its exports plummet from more than 30,000 barrels a day in the 1990s to around 3500 today. The Saudi consumption curve is climbing at about 4% per year, and unless the country can raise production above 11 million barrels a day, its exports will disappear by 2050.


2017 ◽  
Vol 265 ◽  
pp. 994-998 ◽  
Author(s):  
E.S. Makhotkina ◽  
M.V. Shubina

The causes of the global vanadium consumption increase are described and new applications of this metal are given in the article. The main natural sources of vanadium are titanomagnetite, which is a strategic mineral raw material. The current volumes of vanadium extraction from natural raw materials do not match the demand of the market. Therefore there is an urgent need for recycling of secondary and technogenic sources. Partially the basic existing technologies processing vanadium-containing waste are reviewed. The effect of these wastes on the environment and human health is analyzed. The importance of vanadium steel slag recycling for the ecological state of industrial regions, resource-efficiency in expanding the raw material sources of vanadium and reducing the cost of steel production in general is shown. The results of studies on the extraction of vanadium in the form of soluble vanadate of metallurgical vanadium slag using hydrometallurgical processing are demonstrated. The analysis of the received values of the vanadium extraction degree was conducted. The influence of various factors on the completeness of extraction was examined. A significant influence on the vanadium extraction degree of slag chemical composition, the ratio of slag and alkaline additives in the charge, conditions of roasting and leaching was revealed.


2011 ◽  
Vol 239-242 ◽  
pp. 679-682
Author(s):  
Jia Ying Sun ◽  
Fu Dan Chen

To reduce the cost and improve concrete performance, massive admixtures were needed to be added to the concrete. With the research going, the high quality mixture is increasingly becoming the indispensable concrete component. The steel slag powder is the steel-slag comprehensive utilization technical commanding point compared with the level of the steel slag application nowadays in the world. In order to develop the application of the steel slag fine powder in cement concrete domain, this article analyzes autoclaved soundness of the Baosteel steel-slag fine powder as well as the compatibility of it with the cement and the concrete admixtures.


2017 ◽  
Vol 1 (1) ◽  
pp. 60 ◽  
Author(s):  
Albert Empawi Tindit ◽  
Seca Gandaseca ◽  
Laurna Nyangon ◽  
Ahmad Mustapha Mohamad Pazi

Matang Mangrove Forest is under systematic management since 1902 and still considered as the best managed mangrove forest in the world. This research was conducted to measure the time and productivity of forest harvesting operation and also to analyze the cost and revenue of mangrove forest harvesting operation at Matang mangrove forest. This project had been carried out in cooperation with Seri Sepetang Enterprise, one of the harvesting licenses in Kuala Sepetang, Perak.  Data collections were taken in every station starting from standing tree until to the Kiln-Drying jetty. The data then calculated by using the formulas of productivity and cost analysis. As the result, the productivity for felling, bucking and debarking, the manual skidding using wheel-barrow and the water transportation are 1.84 tan/hour, 3.82 tan/hour and 4.64 tan/hour respectively.  The cost for each operation of 9 tan log volume for felling, bucking and debarking, the manual skidding using wheel-barrow and the water transportation are RM 56.88, RM 10.80 and RM 36.72 respectively. As the revenue, the company paid RM 260 per 9 tan of log for the in-forest operation (felling, manual skidding and loading to the ship) and pay RM 80 per 9 tan for the water transportation, and they gained the net profit of RM 192.32 and RM 43.28 respectively. The average of forest harvesting operation is twice operation in a day (equal with 2 x 9-ton volume of log production a day), so they will gain a double profit.  In conclusion, the forest harvesting operation is sustainably managed for supplying the raw material of charcoal industries in Matang mangrove forest. Since, they work manually and spend much energy in this forest harvesting operation, so for further study it recommends to conduct the ergonomics evaluation during forest harvesting operation at Matang Mangrove Forest.


1914 ◽  
Vol 8 (4) ◽  
pp. 705-722 ◽  
Author(s):  
A. Pearce Higgins

So long as the rule of capture of private property at sea exists unimpaired, states with mercantile marines of any importance will find that one of the problems they have to face in war is to defend their sea-borne commerce, and to attack that of their adversary. On the 26th March, 1913, Mr. Winston Churchill, the First Lord of the British Admiralty, made an important statement in the House of Commons regarding the methods proposed by Great Britain for the protection of trade. As reported in the Times Mr. Churchill’s speech was as follows: I now turn to one aspect of trade protection which requires special reference. It was made clear at the Second Hague Conference and the London Conference that certain of the great Powers have reserved to themselves the right to convert merchant steamers into cruisers, not merely in national harbours but if necessary on the high seas. There is now good reason to believe that a considerable number of foreign merchant steamers may be rapidly converted into armed ships by the mounting of guns. The sea-borne trade of the world follows well-marked routes, upon nearly all of which the tonnage of the British mercantile marine largely predominates. Our food-carrying liners and vessels carrying raw material following these trade routes would, in certain contingencies, meet foreign vessels armed and equipped in the manner described. If the British ships had no armament they would be at the mercy of any foreign liners carrying one effective gun and a few rounds of ammunition. It would be obviously absurd to meet the contingency of considerable numbers of foreign armoured merchant cruisers on the high seas by building an equal number of cruisers. That would expose this country to an expenditure of money to meet a particular danger altogether disproportionate to the expense caused to any foreign Power in creating that danger. Hostile cruisers, wherever they are found, will be covered and met by British ships of war, but the proper reply to an armed merchantman is another merchantman armed in her own defence. This is the position to which the Admiralty have felt it necessary to draw the attention of leading shipowners. We have felt justified in pointing out to them the danger to life and property which would be incurred if their vessels were totally incapable of offering any defence to an attack. The shipowners have responded to the Admiralty invitation with cordiality, and substantial progress has been made in the direction of meeting it as a defensive measure by preparing to equip a number of first-class British liners to repel the attack of an armed foreign merchant cruiser. Although these vessels have, of course, a wholly different status from that of the regularly-commissioned merchant cruisers such as those we obtain under the Cunard agreement, the Admiralty have felt that the greater part of the cost of the necessary equipment should not fall upon the owners, and we have decided, therefore, to lend the necessary guns, to supply ammunition, and to provide for the training of members’ of the ship’s company to form the guns’ crews. The owners on their part are paying the cost of the necessary structural conversion, which is not great. The British mercantile marine will, of course, have the protection of the Royal Navy under all possible circumstances, but it is obviously impossible to guarantee individual vessels from attack when they are scattered on their voyages all over the world. No one can pretend to view these measures without regret or without hoping that the period of retrogression all over the world which has rendered them necessary may be succeeded by days of broader international confidence and agreement than those through which we are now passing.


Author(s):  
Ahijeet Kumar

Since 1992, economic improvements took place drastically to integrate with the global economy of the world. It made easier, the foreign trade easier. E-commerce is the chunk of IT revolution and has become popular in trading specially in India. With the advancement of time various changes in the business and their transactions. India being an adapter of fast changing technology gives rise to the enhancement of e-commerce. In the view of this paper tries to present a view of evolution of ecommerce and especially in India. This paper shows the order, categories and organization evolved through e-commerce in both finance and physical expression. To extract the benefits obtained from e-commerce and to develop a platform for e-commerce in India. The government should also provide a legal platform for international trade and e-commerce and allow companies to expand globally with the taken care of basic rights like privacy, intellectual property rights, fraud prevention etc. This paper deals with the problem which is in the front of common manufacturers of transformers. Aim of this paper is the ways through which we can provide raw material to develop the transformer. So that these transformer producers get an ample amount of foreign raw products which help in improving the quality of product as well as reducing the cost. The Indian components of transformers do not perform so well in the terms of quality so Indian transformers lack in quality by using these foreign raw products transformer producer may produce the quality products and can also export to other countries


TAPPI Journal ◽  
2014 ◽  
Vol 13 (11) ◽  
pp. 37-43 ◽  
Author(s):  
LIISA KOTANEN ◽  
MIKA KÖRKKÖ ◽  
ARI ÄMMÄLÄ ◽  
JOUKO NIINIMÄKI

The use of recovered paper as a raw material for paper production is by far the most economical and ecological strategy for the disposal of waste paper. However, paper production from recovered paper furnish generates a great amount of residues, and the higher the demand requirements for the end product, the higher the amount of rejected material. The reason for this is that the selectivity of the deinking process is limited; therefore, some valuable components are also lost in reject streams. The rejection of usable components affects the economics of recycled paper production. As the cost of waste disposal continues to increase, this issue is becoming more and more severe. This paper summarizes the current state of the resource efficiency in recycled pulp production and provides information on the volumes of rejected streams and the usable material within them. Various means to use these reject streams are also discussed, including the main findings of a recent thesis by the main author. This review summarizes current internal and external use of reject streams generated in the deinking operations.


2019 ◽  
Vol 2019 (3) ◽  
pp. 47-53
Author(s):  
Галина Глембоцкая ◽  
Galina Glembockaya ◽  
Станислав Еремин ◽  
Stanislav Eremin

In order to identify promising strategic development possibilities for the pharmaceutical industry in the Russian Federation, a pilot study was conducted, which has analyzed the main trends in the development of innovative medicines. As a result of the content analysis of available sources of scientific literature, the characteristics of options used in the world practice for increasing the innovative activity of individual subjects and the pharmaceutical market as a whole are presented. Possible reserves for the further development of the innovative component of the pharmaceutical market within the framework of the concept of personalized medicine according to the P4 principle (predictive - personalized - preventive - participatory) are identified and structured. The results of use by individual pharmaceutical companies of scientifically and practically justified approaches to optimizing the costs of development and promoting drugs are presented. The advantages and real prospects of a generally accepted method to reduce the cost of development by «expanding the pharmacological effect» (label expansion) of already existing drugs with a known safety profile in the world practice are shown. A scientific generalization and structuring of the goals and results of the post-registration phase of clinical trials to expand the pharmacological action of a number of drugs already existed at the market have been carried out.


Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  


Sign in / Sign up

Export Citation Format

Share Document