scholarly journals Interaction between Screw Dislocation and Interfacial Crack in Fine-Grained Piezoelectric Coatings under Steady-State Thermal Loading

2021 ◽  
Vol 11 (24) ◽  
pp. 11922
Author(s):  
Shuaishuai Hu ◽  
Junlin Li

The mechanical behavior of fine-grained piezoelectric/substrate structure with screw dislocation and interface edge crack under the coupling action of heat, force and electricity are studied. Using the mapping function method, firstly, the finite area plane is transformed into the right semi-infinite plane, then the expression of the temperature field is given with the help of the complex function, and then the temperature field of the problem is achieved. By constructing the general solution of the governing equation with temperature function, the analytical expression of the image force is derived. Finally, the effects of material parameters, temperature gradient, coating thickness and crack size on image force are analyzed by numerical examples. The results show that the temperature gradient has a very significant effect on the image force, and thicker coating is conducive to the stability of dislocation and interface crack.

2019 ◽  
Vol 2019 ◽  
pp. 1-13
Author(s):  
Shuaishuai Hu ◽  
Jiansheng Liu ◽  
Junlin Li ◽  
Xiufeng Xie

The interaction between micro- and macrocracks in a fine-grained piezoelectric coating/substrate under remote antiplane mechanical and in-plane electrical loadings was studied. The principle of superposition and a mapping function method was used to transform the fine-grained coating/substrate structure containing the screw dislocation and the edge interfacial crack into the right semi-infinite plane piezoelectric bimaterial with screw dislocation to simplify the problem. Furthermore, the electric field, displacement field, intensity factors, and image force of these two problems were established. In addition, numerical calculations were then given graphically to study the effects of the elastic modulus of the material, the size of the crack, the thickness of the coating, and the screw dislocation angle on the edge interface crack and dislocation.


2021 ◽  
Vol 261 ◽  
pp. 02089
Author(s):  
Xin-Kun Du ◽  
Ya-Li Zhang ◽  
Sheng-Hu Ding

In the present work, the problem for elliptical inclusion with interfacial crack in thermoelectric material is studied. The inclusion and matrix are assumed to be imperfect bonding, which is subjected to uniform heat flux and energy flux at infinity. The interfacial cracking problem of elliptic inclusion in thermoelectric material is investigated by using conformal mapping and complex function method. The complex expressions of temperature field and electric field in inclusion and matrix are obtained. The energy release rate of thermoelectric material under the influence of inclusion is given. The effects of elliptic inclusion with interfacial crack on temperature field and electric potential also are compared by numerical examples. The results show that inclusion reduces the conversion efficiency of thermoelectric material.


2012 ◽  
Vol 490-495 ◽  
pp. 56-60
Author(s):  
Min Yu ◽  
You Wen Liu

The interaction between a screw dislocation and a reinforced lip-shaped crack embedded in an infinite matrix subjected to a remote longitudinal shear load is investigated in this paper. By combining the sectionally holomorphic function theory, Cauchy singular integral, singularity analysis of complex functions and Riemann boundary problem, the problem is reduced to solve an elementary complex potentials equation. The general expressions of complex function in the matrix and the reinforcement layer are derived explicitly in series form for the case when the screw dislocation is located in the matrix. The image force acting on the screw dislocation and the stress intensity factor are also calculated. Some numerical results are provided to discuss the effects of dislocation position, material parameters, geometric configurations and eigenstrain on the image force.


2006 ◽  
Vol 16 (2) ◽  
pp. 102-109 ◽  
Author(s):  
Youwen Liu ◽  
Bo Li ◽  
Qihong Fang

Abstract This paper attempts to investigate the problem for the interaction between a screw dislocation and a piezoelectric circular inhomogeneity with interface cracks in viscoelastic matrix. Utilizing the Laplace transform method, we find that the viscoelastic problem is first reduced to an associated elastic one. After solving the associated elastic problem through complex function method, the solution of viscoelastic problem is obtained by using the inverse Laplace transformation. The viscoelasticity of material is modeled by the combination of spring and dashpot. Particularly, the boundary value problem for standard linear solid model is solved analytically. The analytical results show that the force acting on the dislocation depends on the piezoelectric properties of inhomogeneity and interfacial crack, and the magnitude of the force evolves toward a constant value as time elapses. However, the viscoelasticity of material cannot alter the equilibrium position of the dislocation. Results presented in this paper are in agreement with the previous solution as special cases.


2012 ◽  
Vol 182-183 ◽  
pp. 1549-1553
Author(s):  
Min Yu ◽  
You Wen Liu

The paper is aim to investigate the interaction of a screw dislocation in strained reinforcement with a lip-shaped crack under remote longitudinal shear load using complex variable method of Elasticity. The exact solution of complex function of the matrix and the renforcement layer are obtain in series form; then, the expressions of stress field, image force and stress intensity factor of crack tip can be derived; finally, numerical disccusions are pesented and the results shows that the lip-shaped crack in reinforcement layer has interference effect on the interaction of dislocation and reinforcement layer, and the eigenstrain in x-direction has little effect on image force; however, the eigenstrain in y-direction has great influence on image force.


Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1792
Author(s):  
Bingbing Dong ◽  
Yu Gu ◽  
Changsheng Gao ◽  
Zhu Zhang ◽  
Tao Wen ◽  
...  

In recent years, the new type design of current transformer with bushing structure has been widely used in the distribution network system due to its advantages of miniaturization, high mechanical strength, maintenance-free, safety and environmental protection. The internal temperature field distribution is an important characteristic parameter to characterize the thermal insulation and aging performance of the transformer, and the internal temperature field distribution is mainly derived from the joule heat generated by the primary side guide rod after flowing through the current. Since the electric environment is a transient field and the thermal environment changes slowly with time as a steady field under the actual conditions, it is more complex and necessary to study the electrothermal coupling field of current transformer (CT). In this paper, a 3D simulation model of a new type design of current transformer for distribution network based on electric-thermal coupling is established by using finite element method (FEM) software. Considering that the actual thermal conduction process of CT is mainly by conduction, convection and radiation, three different kinds of boundary conditions such as solid heat transfer boundary condition, heat convection boundary condition and surface radiation boundary condition are applied to the CT. Through the model created above, the temperature rise process and the distribution characteristics of temperature gradient of the inner conductor under different current, different ambient temperatures and different core diameters conditions are studied. Meanwhile, the hottest temperature and the maximum temperature gradient difference are calculated. According to this, the position of weak insulation of the transformer is determined. The research results can provide a reference for the factory production of new type design of current transformer.


2011 ◽  
Vol 199-200 ◽  
pp. 1492-1495 ◽  
Author(s):  
Guo Shun Wang ◽  
Rong Fu ◽  
Liang Zhao

The simulation calculation on the temperature field of the disc brake system on high-speed trains under the working condition of constant speed at 50Km/h is made. A steady-state calculation model is established according to the actual geometric size of a brake disc and a brake pad, and the analog calculation and simulation on the temperature field of the brake disc and the brake pad by using the large-scale nonlinear finite element software ABAQUS are carried out. The distribution rules of the temperature field of the brake disc and the brake pad under the working condition of constant speed are made known. The surface temperature of the brake disc at friction radius is the highest, with a band distribution for temperature. There exists a temperature flex point in the direction of thickness, of which the thickness occupies 15% of that of the brake disc; due to the small volume of the brake pad, the temperature gradient of the whole brake pad is not sharp, and larger temperature gradient occurs only on the contact surface.


2017 ◽  
Vol 835 ◽  
pp. 170-216 ◽  
Author(s):  
Sayan Das ◽  
Shubhadeep Mandal ◽  
Suman Chakraborty

The motion of a viscous droplet in unbounded Poiseuille flow under the combined influence of bulk-insoluble surfactant and linearly varying temperature field aligned in the direction of imposed flow is studied analytically. Neglecting fluid inertia, thermal convection and shape deformation, asymptotic analysis is performed to obtain the velocity of a force-free surfactant-laden droplet. The droplet speed and direction of motion are strongly influenced by the interfacial transport of surfactant, which is governed by surface Péclet number. The present study is focused on the following two limiting situations of surfactant transport: (i) surface-diffusion-dominated surfactant transport considering small surface Péclet number, and (ii) surface-convection-dominated surfactant transport considering high surface Péclet number. Thermocapillary-induced Marangoni stress, the strength of which relative to viscous stress is represented by the thermal Marangoni number, has a strong influence on the distribution of surfactant on the droplet surface. The present study shows that the motion of a surfactant-laden droplet in the combined presence of temperature and imposed Poiseuille flow cannot be obtained by a simple superposition of the following two independent results: migration of a surfactant-free droplet in a temperature gradient, and the motion of a surfactant-laden droplet in a Poiseuille flow. The temperature field not only affects the axial velocity of the droplet, but also has a non-trivial effect on the cross-stream velocity of the droplet in spite of the fact that the temperature gradient is aligned with the Poiseuille flow direction. When the imposed temperature increases in the direction of the Poiseuille flow, the droplet migrates towards the flow centreline. The magnitude of both axial and cross-stream velocity components increases with the thermal Marangoni number. However, when the imposed temperature decreases in the direction of the Poiseuille flow, the magnitude of both axial and cross-stream velocity components may increase or decrease with the thermal Marangoni number. Most interestingly, the droplet moves either towards the flow centreline or away from it. The present study shows a critical value of the thermal Marangoni number beyond which the droplet moves away from the flow centreline which is in sharp contrast to the motion of a surfactant-laden droplet in isothermal flow, for which the droplet always moves towards the flow centreline. Interestingly, we show that the above picture may become significantly altered in the case where the droplet is not a neutrally buoyant one. When the droplet is less dense than the suspending medium, the presence of gravity in the direction of the Poiseuille flow can lead to cross-stream motion of the droplet away from the flow centreline even when the temperature increases in the direction of the Poiseuille flow. These results may bear far-reaching consequences in various emulsification techniques in microfluidic devices, as well as in biomolecule synthesis, vesicle dynamics, single-cell analysis and nanoparticle synthesis.


1998 ◽  
Vol 13 (5) ◽  
pp. 1255-1259 ◽  
Author(s):  
Sung Kang Hur ◽  
Sang H. Yoo ◽  
Joanna R. Groza ◽  
Jung Man Doh ◽  
Kazuo Yamazaki ◽  
...  

Functionally gradient materials (FGM) were prepared using layers of ZrO2 –3 mol% Y2O3 ceramic and NiCrAlY powders. A fine-grained zirconia powder was chosen to lower the ceramic sintering temperature and achieve simultaneous metal and ceramic densification. Consolidation of FGM's was achieved by a short time field-assisted sintering technique. Sintering was performed either at a constant temperature or in a temperature gradient by using punches made of different materials (i.e., one graphite and one tungsten). A temperature gradient of at least 100 °C was required with a low value of 1200 °C at the metal end and exceeding 1300 °C at the ceramic end. Increasing the number of intermediate layers alleviates some of the cracks formed during sintering due to different coefficients of thermal expansion.


Sign in / Sign up

Export Citation Format

Share Document