scholarly journals Sensitivity Analysis of Holdback Bar Release Load during Catapult-Assisted Takeoff of Carrier-Based Aircraft

2022 ◽  
Vol 12 (2) ◽  
pp. 785
Author(s):  
Enze Zhu ◽  
Zhipeng Zhang ◽  
Hong Nie
Keyword(s):  
Friction Coefficient ◽  
Kinetic Model ◽  
Contact Surface ◽  
Structural Parameters ◽  
Friction Model ◽  
Release Process ◽  
Factors Affecting ◽  
Mechanical Models ◽  
Multi Body ◽  
Surface Angle

The release load of holdback bar will affect the safety of catapult-assisted takeoff of carrier-based aircraft, and the accurate control of releasing the load will ensure success. The magnitude and the control accuracy of release load are important parameters which impact the takeoff performance, therefore unstable release load and insufficient release precision are the main factors affecting the takeoff safety. In this paper, mechanical models of the carrier-based aircraft in the catapult-assisted takeoff tensioning state and gliding state after release are established based on multi-body dynamics, contact mechanics and tribological theory, and the influence of the release load of the holdback bar on the catapult-assisted takeoff performance is analyzed. Furthermore, a kinetic model of the holdback bar device is established, and the kinetic characteristics of the release process of the holdback bar are studied. Based on the kinetic model and friction model of the holdback bar, the influencing factors of the sensitivity of the holdback bar release load are analyzed and the structural parameters are optimized. The results show that the released load decreases slowly with the increase of the contact surface angle of the holdback bar structure and increases rapidly when that angle reaches the critical value; besides, the release load increases slowly with the increase of the friction coefficient of the contact surface and increases faster when the critical friction coefficient is reached.

scholarly journals DESCRIPTIVE MODEL OF SLIDING FRICTION PROCESSES

2015 ◽  
Vol 2 ◽  
pp. 227
Author(s):  
Andris Martinovs ◽  
Vladimir Gonca
Keyword(s):  
Friction Coefficient ◽  
Surface Area ◽  
Contact Surface ◽  
Sliding Friction ◽  
Friction Model ◽  
Friction Process ◽  
Contact Surface Area ◽  
Optimal Surface ◽  
Sliding Friction Coefficient ◽  
The Mathematical Model

Paper analyses the sliding friction coefficient of rubber on concrete, timber and ceramic tile surfaces depending on the weight of the sliding object and contact surface area. It has been established that increase in the weight of the object makes sliding friction coefficient to grow. In the case of increase in size of contact area, sliding friction coefficient between rubber and concrete also increases, but it decreases between rubber- timber and rubber- tile. The mathematical model for description of sliding friction process has been developed which can be used to determine optimal surface area and a pattern as well as optimal weight of the sliding object in order to provide sufficient sliding friction. Model has five independent constants. It includes the contact surface area, the weight and the velocity of the sliding object, sliding friction coefficient, temperature and time.

scholarly journals A Study on Multi-body Dynamic Modelling and Optimization for Mechanical Quick Closing Valve

2018 ◽  
Vol 167 ◽  
pp. 03004
Author(s):  
Wang Bo ◽  
Li Junyan ◽  
Wu Lifang ◽  
Chen Xuekai
Keyword(s):  
Lagrange Equation ◽  
Structural Parameters ◽  
Dynamic Modelling ◽  
Friction Model ◽  
Normal Contact ◽  
Control Rod ◽  
Multi Body ◽  
Off Time ◽  
Body Dynamic ◽  
Modelling And Optimization

The multi-body dynamic modelling and optimization methods of mechanical quick closing valve are studied in this paper. The Lagrange equation is specified characterizing the closing process. Normal contact force and tangent friction force between the components are obtained by using equivalent spring-damper model and no-linear coulomb friction model. The theoretical result of the valve’s kinematic response is verified by the experiment. In order to analyse the relationship between structural parameters and the closing behaviour intuitively, a single degree of freedom model is provided. It is shown that the mass of the control rod is the key parameter exerting important influence on the cut-off time of the valve. The cut-off time will be shortened by about 1.2ms while the mass of control rod reduces 0.01kg.

Experimental Investigations of the Rubber-Asphalt Sliding Pair Dynamics

2002 ◽  
Author(s):  
Ante Bozˇic´ ◽  
Ivan Petrovic´ ◽  
Nedjeljko Peric´ ◽  
Jadranko Matusˇko
Keyword(s):  
Friction Coefficient ◽  
Dynamic Behavior ◽  
Friction Force ◽  
Contact Surface ◽  
Friction Model ◽  
Laboratory Model ◽  
Experimental Investigations ◽  
Dynamic Friction ◽  
The Road ◽  
Friction Models

A laboratory model for experimental investigations of the rubber-asphalt sliding pair has been designed with the purpose of better understanding of dynamic behavior of the friction force in the contact patch between the car tire and the road. Its design is described and some experimental results are given. These results confirm that it is essential to use a dynamic friction model in order to describe friction force in contact between the car tire and the road. Moreover, they indicate that the existing dynamic friction models night be physically incorrect regarding the change of friction coefficient for an asperity bristle passing through the contact surface.

An improved nonlinear model considering relative velocity for the friction behavior between untwisted glass-fiber tow and roller

2021 ◽  
pp. 004051752110308
Author(s):  
Yang Liu ◽  
Zhong Xiang ◽  
Xiangqin Zhou ◽  
Zhenyu Wu ◽  
Xudong Hu
Keyword(s):  
Friction Coefficient ◽  
Glass Fiber ◽  
Relative Velocity ◽  
Friction Model ◽  
Woven Fabric ◽  
Test Results ◽  
Application Process ◽  
Friction Behavior ◽  
Improved Model

Friction between the tow and tool surface normally happens during the tow production, fabric weaving, and application process and has an important influence on the quality of the woven fabric. Based on this fact, this paper studied the influence of tension and relative velocity on the three kinds of untwisted-glass-fiber tow-on-roller friction with a Capstan-based test setup. Furthermore, an improved nonlinear friction model taking both tension and velocity into account was proposed. According to statistical test results, firstly, the friction coefficient was found to be positively correlated with tension and relative velocity. Secondly, tension and velocity were complementary on the tow-on-roller friction behavior, with neither being superior to the other. Thirdly, an improved model was found to present well the nonlinear characteristics between friction coefficient and tension and velocity, and predicational results of the model were found to agree well with the observations from Capstan tests.

On the Application of the Lu-Gre Model to Simulate Joint Friction in Multi-Body Systems

2011 ◽  
Author(s):  
Kedar Gajanan Kale ◽  
Rajiv Rampalli
Keyword(s):  
Friction Model ◽  
Lugre Model ◽  
Friction Forces ◽  
Joint Friction ◽  
Modeling Techniques ◽  
Static Regime ◽  
Increasing Demand ◽  
Automotive Suspension ◽  
Multi Body

Advances in the application of multi-body simulation technology to real world problems have led to an ever increasing demand for higher fidelity modeling techniques. Of these, accurate modeling of friction is of strategic interest in applications such as control system design, automotive suspension analysis, robotics etc. Joints (sometimes referred to as constraints) play an important role in defining the dynamics of a multi-body system. Hence, it is imperative to accurately account for friction forces arising at these joints due to the underlying interface dynamics. In this paper, we discuss the application of LuGre, a dynamic friction model to simulate joint friction. We choose the LuGre model due to its ability to capture important effects such as the Stribeck effect and the Dahl effect. The native 1-d LuGre model is extended to formulate friction computations for non-trivial joint geometries and dynamics in 2 and 3 dimensions. It is also extended to work in the quasi-static regime. Specific applications to revolute, cylindrical and spherical joints in multi-body systems are discussed. Finally, an engineering case study on the effects of joint friction in automotive suspension analysis is presented.

Estimation of Gear Friction Coefficient using Directional Parameter of Tooth Surface

2021 ◽  
pp. 1-27
Author(s):  
Junichi Hongu ◽  
Ryohei Horita ◽  
Takao Koide
Keyword(s):  
Friction Coefficient ◽  
Contact Surface ◽  
Gear Tooth ◽  
Correction Term ◽  
Tooth Surface ◽  
Oil Film ◽  
Tooth Surfaces ◽  
Frictional Coefficients ◽  
Finishing Processes ◽  
The Relationship

Abstract This study proposes a modification of the Matsumoto equation using a directional parameter of tooth surfaces to adapt various gear finishing processes. The directional parameters of a contact surface, which affect oil film formations, have been discussed in the field of tribology; but this effect has been undetermined on the meshing gear tooth surfaces having directional machining marks. Thus, this paper investigates the relationship between the gear frictional coefficients and the directional parameters (based on ISO25178) of their tooth surfaces with the various finishing processes; and modifies the Matsumoto equation by introducing a new directional parameter to augment the various gear finishing processes. Our findings indicate that through optimizing the coefficient of the correction term the include the new directional parameter, the calculated friction values using the modified Matsumoto equation correlate more highly to the experimental friction values than that using the unmodified Matsumoto equation.

Viscous Friction Effect During the Process of Tightening and Loosening of Bolted Joints

2021 ◽  
Author(s):  
Qingyuan Lin ◽  
Yong Zhao ◽  
Qingchao Sun ◽  
Kunyong Chen
Keyword(s):  
Friction Coefficient ◽  
Viscous Friction ◽  
Normal Pressure ◽  
Friction Model ◽  
Bolted Joints ◽  
Critical Parameters ◽  
Bolted Joint ◽  
Sliding Velocity ◽  
Friction Effect ◽  
Bearing Friction

Abstract Bolted connection is one of the most widely used mechanical connections because of its easiness of installation and disassembly. Research of bolted joints mainly focuses on two aspects: high precision tightening and improvement of anti-loosening performance. The under-head bearing friction coefficient and the thread friction coefficient are the two most important parameters that affect the tightening result of the bolted joint. They are also the most critical parameters that affect the anti-loosening performance of the bolted joint. Coulomb friction model is a commonly used model to describe under-head bearing friction and thread friction, which considers the friction coefficient as a constant independent of normal pressure and relative sliding velocity. In this paper, the viscous effect of the under-head bearing friction and thread friction is observed by measuring the friction coefficient of bolted joints. The value of the friction coefficient increases with the increase of the relative sliding velocity and the decrease of the normal pressure. It is found that the Coulomb viscous friction model can better describe the friction coefficient of bolted joints. Taking into account the dense friction effect, the loosening prediction model of bolted joints is modified. The experimental results show that the Coulomb viscous friction model can better describe the under-head bearing friction coefficient and thread friction coefficient. The model considering the dense effect can more accurately predict the loosening characteristics of bolted joints.

Numerical Investigation of Size Effect on Dry Friction Behavior in Micro Upsetting Process

2014 ◽  
Vol 997 ◽  
pp. 321-324
Author(s):  
Wei Zheng ◽  
Guang Chun Wang ◽  
Bing Tao Tang ◽  
Xiao Juan Lin ◽  
Yan Zhi Sun
Keyword(s):  
Friction Coefficient ◽  
Size Effect ◽  
Dry Friction ◽  
Normal Pressure ◽  
Friction Model ◽  
Strain Hardening Exponent ◽  
Forming Process ◽  
Friction Behavior ◽  
Initial Yield Stress ◽  
Coulomb’S Friction

After modifying the Wahime/Bay friction model, a new friction model suitable for micro-forming process without lubrication is established. In this model, it is shows that the friction coefficient is a function of strain hardening exponent, the normal pressure and the initial yield stress of material. Based on the experimental data, the micro-upsetting process is simulated using the proposed friction model. The simulation results are used to investigate the size effect on the dry friction behavior. It is found that the Coulomb’s friction coefficient is dropping with miniaturization of specimens when the amount of reduction is not too large.

A Comparison of Two Microslip Contact Models for Studying the Mechanics of Underplatform Dampers

2018 ◽  
Author(s):  
Chao Xu ◽  
Dongwu Li ◽  
Muzio M. Gola ◽  
Chiara Gastaldi
Keyword(s):  
Friction Coefficient ◽  
Friction Model ◽  
Tangential Displacement ◽  
Tangential Stiffness ◽  
Contact Loads ◽  
Contact Kinematics ◽  
Contact Models ◽  
Friction Models ◽  
Microslip Friction ◽  
Contact Parameters

In turbine blade systems, under-platform dampers are widely used to attenuate excessive resonant vibrations. Subjected to vibration excitation, the components with frictionally constrained interfaces can involve very complex contact kinematics induced by tangential and normal relative motions. To effectively calculate the dynamics of a blade-damper system, contact models which can accurately reproduce the interface normal and tangential motions are required. The large majority of works have been developed using macroslip friction models to model the friction damping at the contact interface. However, for those cases with small tangential displacement where high normal loads are applied, macroslip models are not enough to give accurate results. In this paper two recently published microslip models are compared, between them and against the simple macroslip spring-slider model. The aim is to find to which extent these models can accurately predict damper mechanics. One model is the so called GG array, where an array of macroslip elements is used. Each macroslip element of the GG array is assigned its own contact parameters and for each of them four parameters are needed: normal stiffness, tangential stiffness, normal gap and friction coefficient. The other one is a novel continuous microslip friction model. The model is based on a modification of the original classic IWAN model to couple normal and tangential contact loads. Like the GG array the model needs normal and tangential stiffness, and friction coefficient. Unlike the GG array the model is continuous and, instead of the normal gap required by the GG array, the Modified IWAN model needs a preload value. The two models are here applied to the study of the mechanics of a laboratory under-platform damper test rig. The results from the two models are compared and allow their difference, both for damper mechanics and for the complex-spring coefficients, to be assessed.

Research for a Projectile Positioning Structure for Stacked Projectile Weapons

2011 ◽  
Vol 78 (5) ◽  
Author(s):  
Qiao Luo ◽  
Xiaobing Zhang
Keyword(s):  
Friction Coefficient ◽  
Structural Parameters ◽  
Static Friction ◽  
Element Model ◽  
Ballistic Performance ◽  
Static Friction Coefficient ◽  
Key Technologies ◽  
Contact Surfaces ◽  
Proper Material ◽  
Multibody Contact

One of the key technologies of stacked projectile weapons is projectile positioning. However, the present projectile positioning structures have their respective advantages and shortcomings. A new structure based on the self-locking principle is put forward in this paper and verified as feasible by static analysis if the proper material and structural parameters are chosen. In order to check the strength and verify the feasibility of the structure under launch conditions, the multibody contact finite element model of the structure is established, coupled with dynamic load in the interior ballistic cycle. According to simulations and analysis, the projectile positioning structure is feasible and the strength of the projectile can meet the strength requirement for launch conditions. For different maximum static friction coefficients, simulations show that an increase in the maximum static friction coefficient between the contact surfaces of the positioning ring and barrel improves the positioning performance, but an increase in the maximum static friction coefficient between the contact surfaces of the positioning ring and projectile worsens. On the basis of great computation, it is found that an increase in the upper thickness and height of the positioning ring improves the positioning performance, but an increase in the lower thickness worsens the positioning performance. Further, a lower thickness affects the positioning performance more greatly. As a result, the positioning ring will be thin and light to improve the positioning performance. Compared with other positioning structures, the new structure has little influence on the ballistic performance and is a good application prospect.

Sign in / Sign up

Export Citation Format

Share Document