scholarly journals Quantitative Model for the Value of the 3D Product Model Use in Production Processes

2021 ◽  
Vol 4 (4) ◽  
pp. 90
Author(s):  
Carl Kirpes ◽  
Dave Sly ◽  
Guiping Hu
Keyword(s):  
Systems Engineering ◽  
Three Dimensional ◽  
Quantitative Model ◽  
Product Model ◽  
Qualitative And Quantitative ◽  
Production Processes ◽  
Product Models

Prior research has shown qualitatively that organizations can increase the value created in their production and assembly processes through the implementation of three-dimensional (3D) product models in those processes. This paper moves beyond qualitative value to develop and calibrate a quantitative model for the value of 3D product model use in production and assembly processes. The principal contributions of this research are development of the quantitative model and determination of the quantitative value of deploying the 3D product model in assembly and production processes; findings developed through interviews with industry experts in industrial and systems engineering to gather the model inputs, calculate the outputs, and then calibrate the model with those industry experts. These results are then compared against the qualitative value categories from prior research to determine the alignment in order and magnitude with the quantitative model results. This paper concludes with a recommendation of where both industry and academia focus future implementation efforts and research based upon the associated results demonstrated in both the qualitative and quantitative model on the value of 3D product model use in assembly and production processes.

scholarly journals Towards Model-based Process Engineering

2019 ◽  
Vol 1 (1) ◽  
pp. 3741-3750 ◽  
Author(s):  
David Inkermann
Keyword(s):  
Product Development ◽  
Systems Engineering ◽  
Process Engineering ◽  
Integrated Modelling ◽  
Product Model ◽  
Model Based ◽  
Product Models ◽  
Analysis And Synthesis ◽  
High Interaction ◽  
Model Based Systems Engineering

AbstractThe high interaction between process and product models in product development and systems engineering (SE) is common sense. However, most research in the field of model based systems engineering (MBSE) focusses of physical systems (hardware and software). The authors claim that this focus is a main reason for the low acceptance and high effort for implementation of SE and MBSE in industrial practice. Thus, this contribution aims at supporting an integrative analysis and synthesis of process and product models by introducing the concept and framework of Model-based Process Engineering. Based on established research this framework introduces three main systems, namely the system of processes, system of product models, and system of tools to describe complex product development. The main contribution of this work is a preliminary concept to structure and link the systems of processes and product models. Besides form the description of the main relations between the systems an integrated modelling concept to represent links between the process and product model system is proposed.

Twixt Ricardo and Rubin: Debating Kincaid Once More

2009 ◽  
Vol 17 (3) ◽  
pp. 192-207 ◽  
Author(s):  
Alfredo Saad-Filho ◽  
Ben Fine
Keyword(s):  
Quantitative Determination ◽  
Empirical Studies ◽  
Value Theory ◽  
Social Structures ◽  
Value Analysis ◽  
Qualitative And Quantitative ◽  
Production Processes ◽  
Productive Labour

AbstractOur final instalment in the debate with Jim Kincaid argues that his value-analysis suffers from weaknesses associated with both Ricardian and Rubinesque (mis-)interpretations of Marx. These approaches are methodologically flawed, because value-theory does not draw upon externally imposed theories or standards of logic or evidence to check the conceptual or empirical validity of its approach to the understanding of capitalism. Rather, Marxian value-theory involves reconstructing in thought the class-based production-processes underpinning capitalism through to their more complex and concrete consequences in the broader economic and social structures, agencies and processes, through which they are formed, albeit with definite effects of their own. Examination of the methodological shortcomings in Kincaid's analysis is followed by specific rebuttals of his claims about the (qualitative and quantitative) determination of value and price, the circulation of capital, the role of competition, fixed capital, productive labour and the leverage of value-theory in informing empirical studies.

Modeling and Transfer of Product Model Digital Data for DDG 51 Class Destroyer Program

1991 ◽  
Vol 7 (04) ◽  
pp. 205-219
Author(s):  
William R. Schmidt ◽  
James R. Vander Schaaf ◽  
Richard V. Shields
Keyword(s):  
Computer Model ◽  
Three Dimensional ◽  
Digital Data ◽  
Modeling Technique ◽  
Product Model ◽  
Cooperative Effort ◽  
Product Models ◽  
Cad Cam ◽  
Ongoing Project ◽  
Weapons Systems

The significant benefits achieved by the Navy from application of a CAD/CAM modeling technique to the Aegis Destroyer Construction Program are described. Building a computer model of the ship—the Arleigh Burke Class (DDG 51)—prior to construction reduces interferences and improves design accuracy and completeness. Major challenges addressed by the paper are the translation to CAD of an existing paper design and the transfer of three-dimensional CAD product models in order to permit construction of the ship at two different yards. This ongoing project represents a major cooperative effort between the Navy, design agencies, weapons systems manufacturers, and two private shipyards.

Conformation of Ribosomes from Escherichia Coli

1974 ◽  
Vol 32 ◽  
pp. 210-211
Author(s):  
M. Boublik ◽  
W. Hellmann ◽  
F. Jenkins
Keyword(s):  
Binding Sites ◽  
Ribosomal Proteins ◽  
Fluorescent Dyes ◽  
Protein Biosynthesis ◽  
Three Dimensional ◽  
Spatial Arrangement ◽  
Dimensional Structure ◽  
Complete Understanding ◽  
And Function

The present knowledge of the three-dimensional structure of ribosomes is far too limited to enable a complete understanding of the various roles which ribosomes play in protein biosynthesis. The spatial arrangement of proteins and ribonuclec acids in ribosomes can be analysed in many ways. Determination of binding sites for individual proteins on ribonuclec acid and locations of the mutual positions of proteins on the ribosome using labeling with fluorescent dyes, cross-linking reagents, neutron-diffraction or antibodies against ribosomal proteins seem to be most successful approaches. Structure and function of ribosomes can be correlated be depleting the complete ribosomes of some proteins to the functionally inactive core and by subsequent partial reconstitution in order to regain active ribosomal particles.

Comparison of standardised lymphoscintigraphic function test and high resolution sonography of the lymphoedema of legs

Phlebologie ◽  
2008 ◽  
Vol 37 (05) ◽  
pp. 247-252 ◽  
Author(s):  
V. S. Brauer ◽  
W. J. Brauer
Keyword(s):  
Lower Leg ◽  
Clinical Findings ◽  
Lower Limbs ◽  
Fatty Tissue ◽  
Qualitative And Quantitative ◽  
Function Test ◽  
Unreliable Method ◽  
Negative Conclusion ◽  
Fine Disperse

SummaryPurpose: Comparison of qualitative and quantitative sonography with the lymphoscintigraphic function test and clinical findings in legs. Patients, methods: In 33 patients a lymphoscintigraphic function test of legs combined with measurement of lymph node uptake was performed and subsequently compared with sonography. Sonographic criteria were: Thickness of cutis, thickness of subcutanean fatty tissue and presence of liquid structures or fine disperse tissue structure of lower limbs, foots and toes. Results: In 51 legs uptake values lie in the pathologic area, in four legs in the grey area and in ten legs in the normal area. The cutis thickness in the lower leg shows no significant correlation with the uptake. The determination of the thickness of the subcutanean fatty tissue of the lower leg and of the cutis thickness of the feet turned out to be an unreliable method. In 47% of the medial lower legs and in 57% of the lateral lower legs with clinical lymphoedema sonography is falsely negative. Conclusion: Early lymphoedema is only detectable with the lymphoscintigraphic function test. In the case of clinical lymphoedema clinical examination is more reliable than sonography.

The Comparative Study of Equisetum pratense, E. sylvaticum, E. telmateia: Accumulation of Silicon, Antioxidant and Antimicrobial Screening

2019 ◽  
Vol 70 (7) ◽  
pp. 2519-2523
Author(s):  
Denisa Batir Marin ◽  
Oana Cioanca ◽  
Mihai Apostu ◽  
Cristina Gabriela Tuchilus ◽  
Cornelia Mircea ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Methanol Extract ◽  
Previous Treatment ◽  
Total Phenolic ◽  
Quantitative Chemical Analysis ◽  
Qualitative And Quantitative ◽  
Antioxidant And Antimicrobial Activity ◽  
The Comparative Study

The objective of the current study is represented by the determination of silica and a phytochemical screening of phenolic derivates of some Equisetum species. The antioxidant and antimicrobial activity for Equisetum pratense Ehrh.,, Equisetum sylvaticum L. and Equisetum telmateia Ehrh. (sin. Equisetum maximum Lam.) were also investigated. The concentration of silicon (Si) in plants was determined by the spectrophotometric method using previous treatment with NaOH 50% both for the stem and the nodal branches [1]. Results obtained varied from 95.12 to 162.10 SiO2 mg/g dry plant which represents 4.44% to 7.58% Si/100g dry sample. Two types of total extracts were obtained using different solvents and were subjected to qualitative and quantitative chemical analysis considering total phenolic content [2]. The highest concentration of investigated compounds was found in the methanolic extract, E. sylvaticum, 196.5mg/g dry sample. Antioxidant activity was monitored spectrophotometrically and expressed in terms of IC50 (�g/mL) [3]. Values gathered ranged from 261.7 to 429.5 �g/mL. The highest capacity to neutralized DPPH radicals was found in E. sylvaticum. In vitro antimicrobial activity was determined using difusimetric method [4]. Testing was performed on four microorganisms: three strains of bacteria and one species of fungi. Different effects were noticed against the bacteria, furthermore the methanol extract appeared to be most efficient. All extracts showed significand antimicrobial activity against Staphylococcus aureus (ATCC 25923) and Candida albicans (ATCC 90028) and weak to no activity against Pseudomonas aeruginosa (ATCC 27853) and Escherichia coli (ATCC 25922).

scholarly journals Recatest—A Technique for Qualitative and Quantitative Assessment of Deferment and Degraded PVD Coatings and CVD Layers in the Deformed Area in the Scratch Test

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2625
Author(s):  
Piotr Domanowski ◽  
Marek Betiuk
Keyword(s):  
Scratch Test ◽  
Metallographic Analysis ◽  
Tool Steels ◽  
Test Device ◽  
Coating Structure ◽  
Testing Technique ◽  
Coating Materials ◽  
Qualitative And Quantitative ◽  
Quantitative Parameters

The purpose of the paper is to present a new Recatest testing technique which uses a series of abrasions within a scratch and its innovative application to describe selected quantitative parameters of locally, plastically deformed substrate and coating materials detected on the spherical microsection in the scratch test. The exposed material structures are subject to a metallographic analysis which allows for the determination of the quantitative parameters, which in turn allow for a description of the change in dynamics of the coating structure within the scratch area as a function of load. These parameters include scratch depth (hs), coating thickness (h1), flash height (hoc, hos), depth of intended material (hd), material depth under scratch (hcp), and material depth under coating (hdb). The paper also includes a description of the Recalo test device designed by the authors, which is used to make a series of spherical abrasion traces on the scratch surface. Recalo is dedicated to the Recatest technique. The analysed material was the CrN/CrCN/HS6-5-2, AlCrN -Alcrona-Balinit/D2 coatings deposited on tool steels.

Sign in / Sign up

Export Citation Format

Share Document