scholarly journals A Simple Model for Wildland Fire Vortex–Sink Interactions

Atmosphere ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 1014
Author(s):  
Bryan Quaife ◽  
Kevin Speer
Keyword(s):  
Large Scale ◽  
Wildland Fire ◽  
Fire Behavior ◽  
Lateral Spreading ◽  
Background Flow ◽  
Fire Plume ◽  
Poisson Equations ◽  
Fuel Burn ◽  
Fire Front ◽  
The Stability

A model is developed to explore fire–atmosphere interactions due to the convective sink and vorticity sources in a highly simplified and idealized form, in order to examine their effect on spread and the stability of various fire front geometries. The model is constructed in a cellular automata framework, is linear, and represents a background flow, convective sink, and vortices induced by the fire plume at every burning cell. We use standard techniques to solve the resulting Poisson equations with careful attention to the boundary conditions. A modified Bresenham algorithm is developed to represent convection. The three basic flow types—large-scale background flow, sink flow, and vortex circulation—interact in a complex fashion as the geometry of the fire evolves. Fire-generated vortex–sink interactions produce a range of fire behavior, including unsteady spread rate, lateral spreading, and dynamic fingering. In this simplified framework, pulsation is found associated with evolving fire-line width, a fire-front acceleration in junction fires, and the breakup of longer initial fire lines into multiple head fires. Fuel is very simply represented by a single burn time parameter. The model fuel is uniform yet patchiness occurs due to a dynamic interaction of diffusive and convective effects. The interplay of fire-induced wind and the geometry of the fire front depends also on the fuel burn time.

scholarly journals Orthorectification of Helicopter-Borne High Resolution Experimental Burn Observation from Infra Red Handheld Imagers

2021 ◽  
Vol 13 (23) ◽  
pp. 4913
Author(s):  
Ronan Paugam ◽  
Martin J. Wooster ◽  
William E. Mell ◽  
Mélanie C. Rochoux ◽  
Jean-Baptiste Filippi ◽  
...  
Keyword(s):  
High Resolution ◽  
Spatial Resolution ◽  
Wildland Fire ◽  
Fire Behavior ◽  
Validation Data ◽  
Recursive Design ◽  
Rate Of Spread ◽  
Infra Red ◽  
Fire Front ◽  
Experimental Burns

To pursue the development and validation of coupled fire-atmosphere models, the wildland fire modeling community needs validation data sets with scenarios where fire-induced winds influence fire front behavior, and with high temporal and spatial resolution. Helicopter-borne infrared thermal cameras have the potential to monitor landscape-scale wildland fires at a high resolution during experimental burns. To extract valuable information from those observations, three-step image processing is required: (a) Orthorectification to warp raw images on a fixed coordinate system grid, (b) segmentation to delineate the fire front location out of the orthorectified images, and (c) computation of fire behavior metrics such as the rate of spread from the time-evolving fire front location. This work is dedicated to the first orthorectification step, and presents a series of algorithms that are designed to process handheld helicopter-borne thermal images collected during savannah experimental burns. The novelty in the approach lies on its recursive design, which does not require the presence of fixed ground control points, hence relaxing the constraint on field of view coverage and helping the acquisition of high-frequency observations. For four burns ranging from four to eight hectares, long-wave and mid infra red images were collected at 1 and 3 Hz, respectively, and orthorectified at a high spatial resolution (<1 m) with an absolute accuracy estimated to be lower than 4 m. Subsequent computation of fire radiative power is discussed with comparison to concurrent space-borne measurements.

scholarly journals The Fire and Smoke Model Evaluation Experiment—A Plan for Integrated, Large Fire–Atmosphere Field Campaigns

Atmosphere ◽  
2019 ◽  
Vol 10 (2) ◽  
pp. 66 ◽  
Author(s):  
Susan Prichard ◽  
N. Larkin ◽  
Roger Ottmar ◽  
Nancy French ◽  
Kirk Baker ◽  
...  
Keyword(s):  
United States ◽  
Atmospheric Chemistry ◽  
Model Evaluation ◽  
Large Scale ◽  
Prescribed Burning ◽  
Wildland Fire ◽  
Fire Behavior ◽  
Fire Smoke ◽  
Smoke Dispersion ◽  
Operational Systems

The Fire and Smoke Model Evaluation Experiment (FASMEE) is designed to collect integrated observations from large wildland fires and provide evaluation datasets for new models and operational systems. Wildland fire, smoke dispersion, and atmospheric chemistry models have become more sophisticated, and next-generation operational models will require evaluation datasets that are coordinated and comprehensive for their evaluation and advancement. Integrated measurements are required, including ground-based observations of fuels and fire behavior, estimates of fire-emitted heat and emissions fluxes, and observations of near-source micrometeorology, plume properties, smoke dispersion, and atmospheric chemistry. To address these requirements the FASMEE campaign design includes a study plan to guide the suite of required measurements in forested sites representative of many prescribed burning programs in the southeastern United States and increasingly common high-intensity fires in the western United States. Here we provide an overview of the proposed experiment and recommendations for key measurements. The FASMEE study provides a template for additional large-scale experimental campaigns to advance fire science and operational fire and smoke models.

scholarly journals Application of a Mini Unmanned Aircraft System for In Situ Monitoring of Fire Plume Thermodynamic Properties

2012 ◽  
Vol 29 (3) ◽  
pp. 309-315 ◽  
Author(s):  
Caroline M. Kiefer ◽  
Craig B. Clements ◽  
Brian E. Potter
Keyword(s):  
Wildland Fire ◽  
Potential Temperature ◽  
Fire Behavior ◽  
Unmanned Aircraft ◽  
In Situ Monitoring ◽  
Unmanned Aircraft System ◽  
Fire Plume ◽  
Aircraft System ◽  
Water Vapor Mixing Ratio

Abstract Direct measurements of wildland fire plume properties are rare because of difficult access to regions near the fire front and plume. Moisture released from combustion, in addition to added heat, can enhance buoyancy and convection, influencing fire behavior. In this study, a mini unmanned aircraft system (miniUAS) was used to obtain in situ measurements of temperature and relative humidity during a prescribed fire. The miniUAS was successfully maneuvered through the plume and its associated turbulence and provided observations of temperature and humidity profiles from near the centerline of the plume. Within the plume, the water vapor mixing ratio increased by 0.5–3.5 g kg−1 above ambient and was caused by the combustion of fuels. Potential temperature perturbations were on the order of 2–5 K. These results indicate that significant moisture and temperature enhancement can occur and may potentially modify convection dynamics of fire plumes.

scholarly journals Current Wildland Fire Patterns and Challenges in Europe: A Synthesis of National Perspectives

2021 ◽  
Vol 14 ◽  
pp. 117862212110281
Author(s):  
Nieves Fernandez-Anez ◽  
Andrey Krasovskiy ◽  
Mortimer Müller ◽  
Harald Vacik ◽  
Jan Baetens ◽  
...  
Keyword(s):  
Land Use ◽  
Large Scale ◽  
Wildland Fire ◽  
Human Life ◽  
Local Analysis ◽  
Wildland Fires ◽  
Fire Statistics ◽  
Quantitative Evidence ◽  
Wide Range ◽  
Fire Patterns

Changes in climate, land use, and land management impact the occurrence and severity of wildland fires in many parts of the world. This is particularly evident in Europe, where ongoing changes in land use have strongly modified fire patterns over the last decades. Although satellite data by the European Forest Fire Information System provide large-scale wildland fire statistics across European countries, there is still a crucial need to collect and summarize in-depth local analysis and understanding of the wildland fire condition and associated challenges across Europe. This article aims to provide a general overview of the current wildland fire patterns and challenges as perceived by national representatives, supplemented by national fire statistics (2009–2018) across Europe. For each of the 31 countries included, we present a perspective authored by scientists or practitioners from each respective country, representing a wide range of disciplines and cultural backgrounds. The authors were selected from members of the COST Action “Fire and the Earth System: Science & Society” funded by the European Commission with the aim to share knowledge and improve communication about wildland fire. Where relevant, a brief overview of key studies, particular wildland fire challenges a country is facing, and an overview of notable recent fire events are also presented. Key perceived challenges included (1) the lack of consistent and detailed records for wildland fire events, within and across countries, (2) an increase in wildland fires that pose a risk to properties and human life due to high population densities and sprawl into forested regions, and (3) the view that, irrespective of changes in management, climate change is likely to increase the frequency and impact of wildland fires in the coming decades. Addressing challenge (1) will not only be valuable in advancing national and pan-European wildland fire management strategies, but also in evaluating perceptions (2) and (3) against more robust quantitative evidence.

scholarly journals Development and Characterization of Two Types of Surface Displayed Levansucrases for Levan Biosynthesis

Catalysts ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 757
Author(s):  
Huiyi Shang ◽  
Danni Yang ◽  
Dairong Qiao ◽  
Hui Xu ◽  
Yi Cao
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Molecular Weight ◽  
Large Scale ◽  
Surface Display ◽  
Yeast Surface Display ◽  
Fusion Partner ◽  
Whole Cell ◽  
Food Industries ◽  
Yeast Surface ◽  
The Stability

Levan has wide applications in chemical, cosmetic, pharmaceutical and food industries. The free levansucrase is usually used in the biosynthesis of levan, but the poor reusability and low stability of free levansucrase have limited its large-scale use. To address this problem, the surface-displayed levansucrase in Saccharomyces cerevisiae were generated and evaluated in this study. The levansucrase from Zymomonas mobilis was displayed on the cell surface of Saccharomyces cerevisiae EBY100 using a various yeast surface display platform. The N-terminal fusion partner is based on a-agglutinin, and the C-terminal one is Flo1p. The yield of levan produced by these two whole-cell biocatalysts reaches 26 g/L and 34 g/L in 24 h, respectively. Meanwhile, the stability of the surface-displayed levansucrases is significantly enhanced. After six reuses, these two biocatalysts retained over 50% and 60% of their initial activities, respectively. Furthermore, the molecular weight and polydispersity test of the products suggested that the whole-cell biocatalyst of levansucrase displayed by Flo1p has more potentials in the production of levan with low molecular weight which is critical in certain applications. In conclusion, our method not only enable the possibility to reuse the enzyme, but also improves the stability of the enzyme.

scholarly journals INTRACISTRONIC MAPPING OF ELECTROPHORETIC SITES IN DROSOPHILA MELANOGASTER: FIDELITY OF INFORMATION TRANSFER BY GENE CONVERSION

Genetics ◽  
1974 ◽  
Vol 76 (2) ◽  
pp. 289-299
Author(s):  
Margaret McCarron ◽  
William Gelbart ◽  
Arthur Chovnick
Keyword(s):  
Drosophila Melanogaster ◽  
Information Transfer ◽  
Large Scale ◽  
Genetic Basis ◽  
Xanthine Dehydrogenase ◽  
Specific Protein ◽  
Wild Type ◽  
Electrophoretic Variation ◽  
The Stability ◽  
Recombination Experiments

ABSTRACT A convenient method is described for the intracistronic mapping of genetic sites responsible for electrophoretic variation of a specific protein in Drosophila melanogaster. A number of wild-type isoalleles of the rosy locus have been isolated which are associated with the production of electrophoretically distinguishable xanthine dehydrogenases. Large-scale recombination experiments were carried out involving null enzyme mutants induced on electrophoretically distinct wild-type isoalleles, the genetic basis for which is followed as a nonselective marker in the cross. Additionally, a large-scale recombination experiment was carried out involving null enzyme rosy mutants induced on the same wild-type isoallele. Examination of the electrophoretic character of crossover and convertant products recovered from the latter experiment revealed that all exhibited the same parental electrophoretic character. In addition to documenting the stability of the xanthine dehydrogenase electrophoretic character, this observation argues against a special mutagenesis hypothesis to explain conversions resulting from allele recombination studies.

scholarly journals A Digital Framework to Predict the Sunshine Requirements of Landscape Plants

2021 ◽  
Vol 11 (5) ◽  
pp. 2098
Author(s):  
Heyi Wei ◽  
Wenhua Jiang ◽  
Xuejun Liu ◽  
Bo Huang
Keyword(s):  
Solar Radiation ◽  
Plant Species ◽  
Large Scale ◽  
Normal Growth ◽  
Adaptive Selection ◽  
Landscape Plant ◽  
Landscape Plants ◽  
The Stability ◽  
Stability And Accuracy ◽  
The City

Knowledge of the sunshine requirements of landscape plants is important information for the adaptive selection and configuration of plants for urban greening, and is also a basic attribute of plant databases. In the existing studies, the light compensation point (LCP) and light saturation point (LSP) have been commonly used to indicate the shade tolerance for a specific plant; however, these values are difficult to adopt in practice because the landscape architect does not always know what range of solar radiation is the best for maintaining plant health, i.e., normal growth and reproduction. In this paper, to bridge the gap, we present a novel digital framework to predict the sunshine requirements of landscape plants. First, the research introduces the proposed framework, which is composed of a black-box model, solar radiation simulation, and a health standard system for plants. Then, the data fitting between solar radiation and plant growth response is used to obtain the value of solar radiation at different health levels. Finally, we adopt the LI-6400XT Portable Photosynthetic System (Li-Cor Inc., Lincoln, NE, USA) to verify the stability and accuracy of the digital framework through 15 landscape plant species of a residential area in the city of Wuhan, China, and also compared and analyzed the results of other researchers on the same plant species. The results show that the digital framework can robustly obtain the values of the healthy, sub-healthy, and unhealthy levels for the 15 landscape plant species. The purpose of this study is to provide an efficient forecasting tool for large-scale surveys of plant sunshine requirements. The proposed framework will be beneficial for the adaptive selection and configuration of urban plants and will facilitate the construction of landscape plant databases in future studies.

scholarly journals No-z Model for Magnetic Fields of Different Astrophysical Objects and Stability of the Solutions

Data ◽  
2021 ◽  
Vol 6 (1) ◽  
pp. 4
Author(s):  
Evgeny Mikhailov ◽  
Daniela Boneva ◽  
Maria Pashentseva
Keyword(s):  
Magnetic Field ◽  
Magnetic Fields ◽  
Large Scale ◽  
Point Of View ◽  
Accretion Discs ◽  
Wide Range ◽  
Astrophysical Objects ◽  
Alpha Effect ◽  
The Stability ◽  
The Magnetic Field

A wide range of astrophysical objects, such as the Sun, galaxies, stars, planets, accretion discs etc., have large-scale magnetic fields. Their generation is often based on the dynamo mechanism, which is connected with joint action of the alpha-effect and differential rotation. They compete with the turbulent diffusion. If the dynamo is intensive enough, the magnetic field grows, else it decays. The magnetic field evolution is described by Steenbeck—Krause—Raedler equations, which are quite difficult to be solved. So, for different objects, specific two-dimensional models are used. As for thin discs (this shape corresponds to galaxies and accretion discs), usually, no-z approximation is used. Some of the partial derivatives are changed by the algebraic expressions, and the solenoidality condition is taken into account as well. The field generation is restricted by the equipartition value and saturates if the field becomes comparable with it. From the point of view of mathematical physics, they can be characterized as stable points of the equations. The field can come to these values monotonously or have oscillations. It depends on the type of the stability of these points, whether it is a node or focus. Here, we study the stability of such points and give examples for astrophysical applications.

scholarly journals A new multi-level algorithm for balanced partition problem on large scale directed graphs

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Xianyue Li ◽  
Yufei Pang ◽  
Chenxia Zhao ◽  
Yang Liu ◽  
Qingzhen Dong
Keyword(s):  
Large Scale ◽  
Directed Graphs ◽  
Vlsi Design ◽  
Graph Partition ◽  
Partition Problem ◽  
Multi Level ◽  
The Stability ◽  
Recursive Partition ◽  
Balanced Partition ◽  
Partition Method

AbstractGraph partition is a classical combinatorial optimization and graph theory problem, and it has a lot of applications, such as scientific computing, VLSI design and clustering etc. In this paper, we study the partition problem on large scale directed graphs under a new objective function, a new instance of graph partition problem. We firstly propose the modeling of this problem, then design an algorithm based on multi-level strategy and recursive partition method, and finally do a lot of simulation experiments. The experimental results verify the stability of our algorithm and show that our algorithm has the same good performance as METIS. In addition, our algorithm is better than METIS on unbalanced ratio.

Sign in / Sign up

Export Citation Format

Share Document