scholarly journals Use of Stacked Layers of Electrospun L-Lactide/Glycolide Co-Polymer Fibers for Rapid Construction of Skin Sheets

2021 ◽  
Vol 8 (1) ◽  
pp. 7
Author(s):  
Mervyn Merrilees ◽  
Neil Buunk ◽  
Ning Zuo ◽  
Nigel Larsen ◽  
Samaneh Karimi ◽  
...  
Keyword(s):  
Small Diameter ◽  
Dermal Fibroblasts ◽  
Polymer Fibers ◽  
304 Stainless Steel ◽  
Molar Ratio ◽  
Fiber Direction ◽  
Skin Cells ◽  
Novel Approach ◽  
Rapid Construction ◽  
Parallel Arrays

This paper describes a novel method for the rapid construction of skin, using multiple layers of aligned electrospun fibers as starting scaffolds. Scaffolds were spun from biodegradable L-lactide/glycolide (molar ratio 10:90) with predominantly parallel arrays of fibers attached peripherally to thin 304 stainless steel layer frames. Each layer frame was held between two thicker support frames. Human skin cells were seeded onto multiple (three–nine) scaffolds. Dermal fibroblasts were seeded on both sides of each scaffold except for one on which keratinocytes were seeded on one side only. Following 48 h of culture, the scaffolds and layer frames were unmounted from their support frames, stacked, with keratinocytes uppermost, and securely held in place by upper and lower support frames to instantly form a multilayered “dermis” and a nascent epidermis. The stack was cultured for a further 5 days during which time the cells proliferated and then adhered to form, in association with the spun fibers, a mechanically coherent tissue. Fibroblasts preferentially elongated in the dominant fiber direction and a two-dimensional weave of alternating fiber and cell alignments could be constructed by selected placement of the layer frames during stacking. Histology of the 7-day tissue stacks showed the organized layers of fibroblasts and keratinocytes immuno-positive for keratin. Electron microscopy showed attachment of fibroblasts to the lactide/glycolide fibers and small-diameter collagen fibers in the extracellular space. This novel approach could be used to engineer a range of tissues for grafting where rapid construction of tissues with aligned or woven layers would be beneficial.

scholarly journals Combined Effects of Carotenoids and Polyphenols in Balancing the Response of Skin Cells to UV Irradiation

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 1931
Author(s):  
Glenda Calniquer ◽  
Marina Khanin ◽  
Hilla Ovadia ◽  
Karin Linnewiel-Hermoni ◽  
David Stepensky ◽  
...  
Keyword(s):  
Cell Damage ◽  
Plasma Concentrations ◽  
Dermal Fibroblasts ◽  
Carnosic Acid ◽  
Rosemary Extract ◽  
Protective Effects ◽  
Skin Cells ◽  
Tomato Extract ◽  
Clinical Experiments

Oral carotenoids and polyphenols have been suggested to induce photo-protective effects. The aim of the study was to test whether the combination of carotenoids and polyphenols produce greater protective effects from UV-induced damage to skin cells. Such damage is characterized by inflammation and oxidative stress; thus, the photo-protective effect can be partially explained by modulating the nuclear factor kappa B (NFκB) and antioxidant response element/Nrf2 (ARE/Nrf2) transcription systems, known as important regulators of these two processes. Indeed, it was found in keratinocytes that carotenoids and polyphenols inhibit UVB-induced NFκB activity and release of cytokine IL-6. A combination of tomato extract with rosemary extract inhibited UVB-induced release of IL-6 more than each of the compounds alone. Moreover, this combination synergistically activated ARE/Nrf2 transcription systems. Inflammatory cytokines such as IL-6 and TNFα induce the expression of matrix metalloproteinases (MMPs), which leads to collagen breakdown; thus, it is important to note that carnosic acid reduced TNFα-induced MMP-1 secretion from human dermal fibroblasts. The in vitro results suggest beneficial effects of phytonutrient combinations on skin health. To assure that clinical experiments to prove such effects in humans are feasible, the human bioavailability of carotenoids from tomato extract was tested, and nearly a twofold increase in their plasma concentrations was detected. This study demonstrates that carotenoids and polyphenols cooperate in balancing UV-induced skin cell damage, and suggests that NFκB and ARE/Nrf2 are involved in these effects.

Electrical Properties of Electrospun Nanofibers of PEO/Carbon Black Composite

2009 ◽  
Vol 151 ◽  
pp. 67-71 ◽  
Author(s):  
Wai Kit Li ◽  
Y.W. Wong
Keyword(s):  
Electrical Properties ◽  
Carbon Black ◽  
Polyethylene Oxide ◽  
Electrospun Nanofibers ◽  
Angular Speed ◽  
Polymer Fibers ◽  
Fiber Direction ◽  
Fiber Morphology ◽  
Polarized Ftir ◽  
Specific Orientation

Electrospinning is an efficient technique for the fabrication of polymer nanofibers. The charges inside the polymer jet tend to repel each other so as to stretch and reduce the diameter of the polymer fibers. By rotating the collector at a fast angular speed, nanofibers with specific orientation can be obtained. In this study, nanofibers of Polyethylene oxide (PEO) with carbon black were prepared by electrospinning. PEO was dissolved in a mixture of water and ethanol. PEO is known as an electrolytic polymer. With the blending of carbon black powders, its electrical properties along the fiber direction were investigated. The fiber morphology and characteristics were studied by SEM and polarized FTIR.

The Influence of Fe/Al Molar Ratio on Microreactor-Based Catalyst Preparation and Carbon Nanotube Preparation

2021 ◽  
Vol 1036 ◽  
pp. 130-136
Author(s):  
Ting Qun Tan ◽  
Lei Geng ◽  
Yan Lin ◽  
Yan He
Keyword(s):  
Carbon Nanotubes ◽  
Catalytic Activity ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Small Diameter ◽  
High Specific Surface Area ◽  
Detection Methods ◽  
Molar Ratio ◽  
High Catalytic Activity

In order to prepare carbon nanotubes with high specific surface area, small diameter, low resistivity, high purity and high catalytic activity, the Fe-Mo/Al2O3 catalyst was prepared based on the microreactor. The influence of different Fe/Al molar ratios on the catalyst and the carbon nanotubes prepared was studied through BET, SEM, TEM and other detection methods. Studies have shown that the pore structure of the catalyst is dominated by slit pores at a lower Fe/Al molar ratio. The catalytic activity is the highest when the Fe/Al molar ratio is 1:1, reaching 74.1%. When the Fe/Al molar ratio is 1:2, the catalyst has a higher specific surface area, the maximum pore size is 8.63 nm, and the four-probe resistivity and ash content of the corresponding carbon nanotubes are the lowest. The higher the proportion of aluminum, the higher the specific surface area of the catalyst and the carbon nanotubes, and the finer the diameter of the carbon nanotubes, which gradually tends to relax. The results show that when the Fe/Al molar ratio is 1:2, although the catalytic activity of the catalyst is not the highest, the carbon nanotubes prepared have the best performance.

scholarly journals NANO-VESICLES OF SALBUTAMOL SULPHATE IN METERED DOSE INHALERS: FORMULATION, CHARACTERIZATION AND IN VITRO EVALUATION

2017 ◽  
Vol 9 (6) ◽  
pp. 100 ◽  
Author(s):  
Mona G. Arafa ◽  
Bassam M. Ayoub
Keyword(s):  
In Vitro Release ◽  
Pulmonary Delivery ◽  
Entrapment Efficiency ◽  
Reversed Phase ◽  
Molar Ratio ◽  
Metered Dose Inhalers ◽  
Salbutamol Sulphate ◽  
Novel Approach ◽  
Metered Dose

Objective: The present work was aimed to prepare niosomes entrapping salbutamol sulphate (SS) using reversed phase evaporation method (REV).Methods: Niosomes were prepared by mixing span 60 and cholesterol in 1:1 molar ratio in chloroform, SS in water was then added to organic phase to form niosomal SS. Formulations after evaporation of chloroform, freeze centrifuged then lyophilized, were evaluated for particles size, polydispersity index (Pdi), zeta-potential, morphology, entrapment efficiency (EE%) and in vitro release. For pulmonary delivery; metered dose inhalers (MDI) were prepared by suspending SS niosomes equivalent to 20 mg SS in hydrofluoroalkane (HFA). The metered valve was investigated for leakage rate, the total number of puffs/canister, weight/puff, dose uniformity and particle size.Results: The results showed spherical niosomes with 400-451 nm particles that entrapped 66.19% of SS. 76.54±0.132% SS release from niosomes that showed a controlled release profile for 8h. The leakage test was not exceeding 4 mg/3 d, the number of puffs were up to 200puffs/canister, the dose delivered/puff was 0.1 mg and 0.64-4.51μm niosomal aerosol.Conclusion: The results indicate an encouraging strategy to formulate a controlled drug delivery by entrapping (SS) in niosomes which could be packaged into (MDI) that met the requirements of (USP) aerosols guidelines which offering a novel approach to respiratory delivery.

Abstract T P99: Development of Liposomes Loaded With Computed Tomogratphy Contrast Agent for Thrombus Imaging

Stroke ◽  
2015 ◽  
Vol 46 (suppl_1) ◽  
Author(s):  
Stepan Koudelka ◽  
Petra Cimflova ◽  
Jaroslav Turanek ◽  
Robert Mikulik
Keyword(s):  
Contrast Agent ◽  
Size Distribution ◽  
Surrounding Tissue ◽  
Molar Ratio ◽  
Preparation Technology ◽  
Lipid Film ◽  
Thrombus Imaging ◽  
Novel Approach ◽  
Ct Contrast Agent

Introduction: Liposomes are the most established nanocarriers that can be loaded with contrast agents as well as tailored for targeting to the desired tissue. Targeted CT liposomes represent a novel approach for rapid thrombus imaging. They allow specific and selective accumulation in thrombus providing significant contrast enhancement (expressed as HU) over the surrounding tissue. Hypothesis: We hypothesize that preparation technology will produce homogenous liposomes with sufficient level of loaded CT contrast agent. Methods: Liposomes were composed of distearoyl phosphatidylcholine, cholesterol, and distearoyl phosphatidylethanolamine - polyethylene glycol 2000 (molar ratio, 55/45/5). CT liposomes were prepared by lipid film hydration with iohexol (Omnipaque 350, GE Healthcare) followed by freeze-thaw extrusion (100 nm). Subsequently, they were purified by dialysis (Slide-A-Lyzer, cut-off 10 kDa) to remove un-loaded ioxehol. After purification, liposome-associated iohexol was determined by UV/VIS spectrophotometry and CT. Size distribution of final CT liposomes was assessed by dynamic light scattering. Results: Preparation technology produced homogenous liposome population having appropriate size distribution (90-110 nm and PD index, 0.05-0.10). Iohexol that remains associated in final CT liposomes represented only 5% of its initial level entering the preparation process. Almost 95% of iohexol was released and its final content was found to be 5 mg iodine/ml. Conclusions: Liposomal CT formulation was prepared with satisfactory size distribution and homogenity. Although the significant portion of iohexol was released, these CT liposomes were still detectable in vitro by CT. This basic liposomal platform will be optimized to achieve higher iohexol loading and will be further developed for thrombus imaging such as targeted CT liposomes.

Sensory feedback and central afferent interaction in the muscle receptor organ of the crab, Carcinus maenas

1996 ◽  
Vol 76 (2) ◽  
pp. 788-798 ◽  
Author(s):  
M. Wildman ◽  
A. Cannone
Keyword(s):  
Action Potentials ◽  
Sensory Feedback ◽  
Carcinus Maenas ◽  
Small Diameter ◽  
Sensory Response ◽  
Fiber Direction ◽  
Single Action ◽  
Muscle Receptor ◽  
Leg Muscles ◽  
Receptor Organ

1. An interaction exists between two proprioceptive afferent neurons innervating the thoracic-coxal muscle receptor organ (TCMRO) of the crab, Carcinus maenas. Intracellular recordings were made from the extraganglionic regions of the afferents in order to characterize this interaction and its effects on sensory feedback. 2. A current-induced depolarization of the nonspiking T fiber of the TCMRO results in a depolarization of the P fiber, a small-diameter (7 microns) neuron innervating the same receptor. This interaction is graded in amplitude, and may result in a single action potential being superimposed on the graded response of the P fiber. A hyperpolarization of the T fiber has a smaller effect on the P fiber than a depolarization of similar amplitude. The interaction is rectified in a T- to P-fiber direction, and has a minimum central delay of approximately 3.6 ms. 3. The site of the interaction between the afferents is situated centrally, within the thoracic ganglion. Action potentials evoked in the P fiber by a T-fiber depolarization propagate actively and antidromically to the periphery. 4. Central modulation of the interaction occurs, because the amplitude of a T-fiber-induced depolarization is reduced in the P fiber during centrally generated spontaneous bursts of activity in the motoneurons of basal leg muscles. 5. Because of the interaction between T and P fibers, action potentials recorded from the peripheral portion of the P fiber during receptor stretch may be either orthodromic, resulting directly from the effects of the stretch on the sensory endings of the P fiber, or antidromic, resulting from the central input from the T fiber. 6. The T- to P-fiber interaction may serve to extend the dynamic sensitivity range of the P fiber, in particular by amplifying its sensory response at short receptor lengths and low velocities of stretch.

scholarly journals Essential Oil Microcapsules Immobilized on Textiles and Certain Induced Effects

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 2029 ◽  
Author(s):  
Miruna S. Stan ◽  
Laura Chirila ◽  
Alina Popescu ◽  
Denisa M. Radulescu ◽  
Diana E. Radulescu ◽  
...  
Keyword(s):  
Membrane Integrity ◽  
Dermal Fibroblasts ◽  
Cell Membrane Integrity ◽  
Textile Materials ◽  
Skin Cells ◽  
In Vitro Biocompatibility ◽  
Short Term Exposure ◽  
Before And After

In order to obtain textile materials with potential utility in the development of cosmetic textiles, this study examined the deposition by padding of rose and sage microcapsules on woven textile structures, with different fiber compositions (100% cotton and 50% cotton/50% polyester). Cationization of the textile materials was performed to enhance the degree of uptake the pf the microcapsules on the fabrics’ surface. A commercially acrylate-based binder was used to fix the microcapsules to the textile substrate and to improve the durability against external factors. The finished textile materials were characterized in terms of their physical-mechanical characteristics. The distribution of microcapsules on the fabrics surface before and after five washing cycles and 1000 abrasion cycles was investigated by scanning electron microscopy. The biocompatibility in terms of cell viability, cell membrane integrity and inflammation status of the functionalized fabrics was evaluated on CCD-1070Sk normal human dermal fibroblasts. The cell morphology was evaluated by F-actin staining using fluorescence microscopy and no significant changes were noticed after the incubation in the presence of fabrics compared with control. The in vitro biocompatibility evaluation on human skin cells confirmed the absence of cytotoxicity after the short-term exposure, supporting further in vivo use of these innovative textiles with improved properties.

Feasibility of Using Vitamin E-Loaded Poly(ε-caprolactone)/Gelatin Nanofibrous Mat to Prevent Oxidative Stress in Skin

2020 ◽  
Vol 20 (6) ◽  
pp. 3554-3562 ◽  
Author(s):  
Saba Kalantary ◽  
Farideh Golbabaei ◽  
Masoud Latifi ◽  
Mohammad Ali Shokrgozar ◽  
Mehdi Yaseri
Keyword(s):  
Oxidative Stress ◽  
Vitamin E ◽  
Electrical Potential ◽  
Radical Scavenging ◽  
Occupational Exposures ◽  
Skin Cells ◽  
Novel Approach ◽  
Tert Butyl Hydroperoxide ◽  
Increased Risk

Some occupational skin exposures lead to the formation of reactive oxygen species (ROS). The occupational exposure of workers to ROS has been found to be associated with an increased risk of developing skin injuries; therefore, it is essential to protect skin against ROS formation. Recently, some studies have been conducted on introducing better alternatives for skin protection. Nanofibers are good candidates for this purpose. The current study was carried out to assess vitamin E-loaded hybrid Poly(ε-caprolactone) (PCL)/gelatin (Gt) nanofibres mats as protective layers of skin exposed to occupational exposures. Vitamin E (VE) was successfully incorporated into PCL/Gt nanofibers while they were formed by electrospinning method. Nanofibers mats were characterized using scanning electron microscopy (SEM) and fourier transform infrared spectroscopy (FTIR). Their degradation behavior, in vitro release, biocompatibility, and antioxidant activity were studied. The diameters of the PCL/Gt/VE nanofibers decreased with the addition of vitamin E. The degradation rate of nanofibers was equal to 42.98 and 50.69% during 7 and 14 days, respectively. Nanofibers containing vitamin E showed an initial burst followed by a sustained release. The PCL/Gt/VE nanofibers exhibited good free radical scavenging activities despite being exposed to a high electrical potential during electrospinning. PCL/Gt/VE nanofibers supported a higher level of viability compared to PCL/Gt ones and significantly assisted human skin cells against tert-Butyl hydroperoxide (t-BHP) induced oxidative stress. Overall, PCL/Gt/VE nanofibers can potentially be used to protect skin against oxidative stress as a novel approach for worker’s healthcare.

scholarly journals Characterization and Cytotoxicity Comparison of Silver- and Silica-Based Nanostructures

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4987
Author(s):  
Elżbieta Adamska ◽  
Karolina Niska ◽  
Anna Wcisło ◽  
Beata Grobelna
Keyword(s):  
Strong Relationship ◽  
Core Shell ◽  
The Novel ◽  
Skin Cells ◽  
Angle Measurements ◽  
Novel Approach ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Ft Ir ◽  
Adhesion Efficiency

Core-shell structures are the most common type of composite material nanostructures due to their multifunctional properties. Silver nanoparticles show broad antimicrobial activity, but the safety of their utilization still remains an issue to tackle. In many applications, the silver core is coated with inorganic shell to reduce the metal toxicity. This article presents the synthesis of various materials based on silver and silica nanoparticles, including SiO2@Ag, Ag@SiO2, and sandwich nanostructures—Ag@SiO2@Ag—and the morphology of these nanomaterials based on transmission electron microscopy (TEM), UV-Vis spectroscopy, and FT-IR spectroscopy. Moreover, we conducted the angle measurements due to the strong relationship between the level of surface wettability and cell adhesion efficiency. The main aim of the study was to determine the cytotoxicity of the obtained materials against two types of human skin cells—keratinocytes (HaCaT) and fibroblasts (HDF). We found that among all the obtained structures, SiO2@Ag and Ag@SiO2 showed the lowest cell toxicity and very high half-maximal inhibitory concentration. Moreover, the measurements of the contact angle showed that Ag@SiO2 nanostructures were different from other materials due to their superhydrophilic nature. The novel approach presented here shows the promise of implementing core-shell type nanomaterials in skin-applied cosmetic or medical products.

scholarly journals Ceriporia lacerata Mycelium Culture Medium as a Novel Anti-Aging Microbial Material for Cosmeceutical Application

Cosmetics ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 101
Author(s):  
Jeong-Hwan Kim ◽  
Changhun An ◽  
Seong Deok Hwang ◽  
Yoon Soo Kim
Keyword(s):  
Culture Medium ◽  
Skin Barrier ◽  
Dermal Fibroblasts ◽  
Aging Effects ◽  
Reference Compound ◽  
Skin Cells ◽  
Normal Human ◽  
Wound Healing Effect ◽  
Skin Wrinkles ◽  
Inflammatory Effect

Skincare is very critical in preventing aging and skin trouble, which is difficult to recover if progressed. However, the development of effective anti-aging solutions is still on the horizon. The purpose of this study was to evaluate the functional efficacy of Ceriporia lacerata exo-pharmaceutical substance (CLEPS) in view of its use in innovative skin care cosmetics. CLEPS was found to have no cytotoxicity against normal human dermal fibroblasts and B16 melanoma cells in a wide concentration range of 0.05–7 mg/mL. It exhibited a whitening effect by inhibiting melanin synthesis comparable to that of the respective reference compound (arbutin). Notably, CLEPS not only substantially increased collagen (65.4%) and filaggrin synthesis (36%), but also significantly inhibited the activity of collagenase (93.4%), suggesting that CLEPS could prevent skin barrier damage or skin wrinkles. In addition, it showed an excellent anti-inflammatory effect and wound-healing effect. Overall, CLEPS exhibited exceptional anti-aging effects in human skin cells, designating as a potential natural cosmeceutical ingredient.

Sign in / Sign up

Export Citation Format

Share Document