scholarly journals Polymeric Inserts Containing Eudragit® L100 Nanoparticle for Improved Ocular Delivery of Azithromycin

Biomedicines ◽  
2020 ◽  
Vol 8 (11) ◽  
pp. 466
Author(s):  
Shiva Taghe ◽  
Shahla Mirzaeei ◽  
Raid G. Alany ◽  
Ali Nokhodchi
Keyword(s):  
Drug Release ◽  
Ex Vivo ◽  
Hydroxypropyl Methylcellulose ◽  
Entrapment Efficiency ◽  
Hydroxyethyl Cellulose ◽  
Burst Release ◽  
Ocular Delivery ◽  
Sustained Drug Release ◽  
Diffusion Technique ◽  
Drug Solution

Polymeric inserts containing azithromycin-loaded Eudragit® L100 nanoparticles were developed to sustain the drug release and enhance its ocular performance. The solvent diffusion technique was employed to prepare nanoparticles. The developed nanoparticles (NPs) were fully characterized and investigated. The solvent casting method was used to prepare azithromycin ocular inserts (azithromycin, AZM film) by adding hydroxypropyl methylcellulose (HPMC) or hydroxyethyl cellulose (HEC) solutions after the incorporation of AZM-loaded Eudragit® L100 nanoparticles into plasticized PVA (polyvinyl alcohol) solutions. The optimized nanoparticles had a particle size of 78.06 ± 2.3 nm, zeta potential around −2.45 ± 0.69 mV, polydispersity index around 0.179 ± 0.007, and entrapment efficiency 62.167 ± 0.07%. The prepared inserts exhibited an antibacterial effect on Staphylococcus aureus and Escherichia coli cultures. The inserts containing AZM-loaded nanoparticles showed a burst release during the initial hours, followed by a sustained drug release pattern. Higher cumulative corneal permeations from AZM films were observed for the optimized formulation compared to the drug solution in the ex-vivo trans-corneal study. In comparison to the AZM solution, the inserts significantly prolonged the release of AZM in rabbit eyes (121 h). The mucoadhesive inserts containing azithromycin-loaded Eudragit® L100 nanoparticles offer a promising approach for the ocular delivery of azithromycin (antibacterial and anti-inflammatory) to treat ocular infections that require a prolonged drug delivery.

scholarly journals DEVELOPMENT AND CHARACTERIZATION OF MUCOADHESIVE MICROSPHERE-LOADED INTRANASAL GEL OF VENLAFAXINE HYDROCHLORIDE

2016 ◽  
Vol 9 (9) ◽  
pp. 139
Author(s):  
Kritika Saikia ◽  
Bhupen Kalita ◽  
Banasmita Kalita
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Entrapment Efficiency ◽  
Sustained Drug Release ◽  
Scanning Calorimetry ◽  
Venlafaxine Hydrochloride ◽  
Gel Formulations ◽  
Carbopol 934P ◽  
Mucoadhesive Microsphere

ABSTRACTObjective: The main objective of the present work is to develop and characterize a novel mucoadhesive intranasal microsphere gel formulation ofdrug venlafaxine to control the drug release through nasal mucosa and reach the target site with minimal side effect. The objectives of the studyare (1) formulation of mucoadhesive microspheres, (2) evaluation of mucoadhesive microspheres, (3) formulation of mucoadhesive microsphereloadednasal gel, (4) and evaluation of nasal gel.Methods: Preparation of chitosan microsphere: The chitosan microspheres were prepared by emulsion cross-linking method. Preparation ofmicrosphere-loaded gel: The nasal gels with varying concentrations of Carbopol 934P were prepared by dispersing required quantity of Carbopol inrequired quantity of distilled water with continuous stirring and kept overnight for complete hydration. The gel was then modified by the addition ofvarying proportion of hydroxypropyl methylcellulose (HPMC) K4M.Results: The prepared microspheres were evaluated for size distribution, surface morphology by scanning electron microscopy, entrapment efficiency,compatibility by Fourier transform infrared spectroscopy, and differential scanning calorimetry. Entrapment efficiency of all formulations was foundmore than 70%. Microsphere formulation containing drug and polymer in the ratio of 1:2.5 was found to be optimized. Optimized microsphereformulation was then incorporated in gel prepared using Carbopol 934P and HPMC. Prepared gel formulations were studied for viscosity, spreadability,and in-vitro drug release in simulated nasal conditions. Viscosity of the optimized batch of gel was recorded at 1056 centipoise. Drug release wasprolonged for the microsphere-in-gel formulations compared to the microspheres alone. For the optimized batch of gel, cumulative drug release of85.67% was found after 8 hrs.Conclusion: The results suggest that venlafaxine hydrochloride mucoadhesive microsphere-loaded nasal gel would give sustained drug release andsuperior bioavailability in the brain sites.Keywords: Venlafaxine, Chitosan, Mucoadhesive, Microsphere, Nasal gel.

Development of Biodegradable Injectable In situ Forming Implants for Sustained Release of Lornoxicam

2018 ◽  
Vol 16 (1) ◽  
pp. 66-78 ◽  
Author(s):  
Ruby Christian ◽  
Vaishali Thakkar ◽  
Tushar Patel ◽  
Mukesh Gohel ◽  
Lalji Baldaniya ◽  
...  
Keyword(s):  
Plasma Concentration ◽  
Drug Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Maximum Plasma ◽  
Sustained Drug Release ◽  
Drug Entrapment Efficiency ◽  
Ft Ir

Objective: The focus of this study was to develop in situ injectable implants of Lornoxicam which could provide sustained drug release. Methods: Biodegradable in situ injectable implants were prepared by polymer precipitation method using polylactide-co-glycolide (PLGA). An optimized formulation was obtained on the basis of drug entrapment efficiency, gelling behavior and in vitro drug release. The compatibility of the formulation ingredients were tested by Fourier transform infrared (FT-IR) spectroscopy, and differential scanning colorimetry (DSC). SEM study was performed to characterize in vivo behavior of in situ implant. Pharmacokinetic study and in vivo gelling study of the optimized formulation were performed on Sprague-Dawley rats. Stability testing of optimized formulation was also performed. Results: The drug entrapment efficiency increased and burst release decreased with an increase in the polymer concentration. Sustained drug release was obtained up to five days. SEM photomicrographs indicated uniform gel formation. Chemical interaction between the components of the formulation was not observed by FT-IR and DSC study. Pharmacokinetic studies of the optimized formulation revealed that the maximum plasma concentration (Cmax), time to achieve Cmax (Tmax) and area under plasma concentration curve (AUC) were significantly higher than the marketed intramuscular injection of lornoxicam. Stability study of optimized batch showed no change in physical and chemical characteristics. Conclusion: Lornoxicam can be successfully formulated as in situ injectable implant that provides long-term management of inflammatory disorders with improved patient compliance.

scholarly journals Preparation and Evaluation of Intraperitoneal Long-Acting Oxaliplatin-Loaded Multi-Vesicular Liposomal Depot for Colorectal Cancer Treatment

Pharmaceutics ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 736
Author(s):  
Sharif Md Abuzar ◽  
Eun Jung Park ◽  
Yeji Seo ◽  
Juseung Lee ◽  
Seung Hyuk Baik ◽  
...  
Keyword(s):  
Colorectal Cancer ◽  
Drug Release ◽  
Entrapment Efficiency ◽  
Lag Phase ◽  
Burst Release ◽  
Sustained Drug Release ◽  
Long Acting ◽  
High Entrapment Efficiency

Colorectal cancer with peritoneal metastasis has a poor prognosis because of inadequate responses to systemic chemotherapy. Cytoreductive surgery followed by intraperitoneal (IP) chemotherapy using oxaliplatin has attracted attention; however, the short half-life of oxaliplatin and its rapid clearance from the peritoneal cavity limit its clinical application. Here, a multivesicular liposomal (MVL) depot of oxaliplatin was prepared for IP administration, with an expected prolonged effect. After optimization, a combination of phospholipids, cholesterol, and triolein was used based on its ability to produce MVL depots of monomodal size distribution (1–20 µm; span 1.99) with high entrapment efficiency (EE) (92.16% ± 2.17%). An initial burst release followed by a long lag phase of drug release was observed for the MVL depots system in vitro. An in vivo pharmacokinetic study mimicking the early postoperative IP chemotherapy regimen in rats showed significantly improved bioavailability, and the mean residence time of oxaliplatin after IP administration revealed that slow and continuous erosion of the MVL particles yielded a sustained drug release. Thus, oxaliplatin-loaded MVL depots presented in this study have potential for use in the treatment of colorectal cancer.

scholarly journals DEVELOPMENT OF NANOEMULSION TO IMPROVE THE OCULAR BIOAVAILABILITY AND PATIENT COMPLIANCE IN POSTOPERATIVE TREATMENT USING INDOMETHACIN

2020 ◽  
pp. 99-107
Author(s):  
DIVYA AJMEERA ◽  
SARANGAPANI MANDA ◽  
KRISHNAVENI JANAPAREDDI ◽  
SUSMITHA KOLLURI
Keyword(s):  
Drug Release ◽  
Patient Compliance ◽  
Ex Vivo ◽  
In Vitro Release ◽  
Postoperative Treatment ◽  
Tween 20 ◽  
Systemic Absorption ◽  
Sustained Drug Release ◽  
Ocular Bioavailability ◽  
Drug Solution

Objective: To develop a new cationic nanoemulsion (NE) for ophthalmic delivery of indomethacin (IND) to improve the permeability and retention time of formulations, thereby improving the drug's ocular bioavailability. Methods: Based on the solubility profile of indomethacin in various solvents, captex 8000 was selected as oil phase, span 20 as a surfactant and tween 20 as co-surfactant to construct pseudo ternary phase diagrams and nanoemulsion region was recognized. Sonication was used as the method of NE preparation. Optimization was done using 32 factorial designs by considering the oil and the ratio of surfactant to co-surfactant (Smix) quantities as independent variables and evaluated for different physicochemical properties. Ex vivo transcorneal permeability was studied using bovine cornea, the In vivo drug pharmacokinetics of optimized NE and marketed formulation were assessed in rabbit aqueous humor and also in plasma. Results: The mean globule size, zeta potential, viscosity, refractive index, pH, surface tension and the osmolarity values for the prepared indomethacin nanoemulsions (IND-NEs) were found between 129.8±1.1 to 191.4±1.6 nm,+13.20±4.6 to+23.45±4.82, 15.3±0.1 to 32.7±0.0 mPas, 1.346±0.007 to 1.386±0.005, 5.5±0.4 to 6.9±0.9, 32.0±2.6 to 52.3±3.4 mN/m and 303-395 mOsm/l respectively and all these values found to be falling under the recommended values for ophthalmic use. From the In vitro release studies, it was found that the IND-NEs exhibited sustained drug release with 67.91±2.01 to 95.90±1.93 % drug release at 24h when compared to the drug solution which showed 99.81±5.21 % drug release within 2h. The Ex vivo drug permeation through the corneal membrane at 4h from the optimized NE and drug solution was found to be 524±1.5 µg/cm2 and 175±2.6 µg/cm2 respectively. Further, the optimized NE was found to be nonirritant with the lowest ocular irritation potential (Iirr) of 1 towards the rabbit's eyes. The area under the drug concentration vs. time curve for 24h (AUC (0–24h)) for optimized NE and the marketed formulation was found to be 1514.99 ng/ml/h and 974.14 ng/ml/h in aqueous humour; 2266.83 ng/ml/h and 778.15 ng/ml/h in plasma respectively. Conclusion: Due to its improved corneal absorption and prolonged drug release along with less systemic absorption, the optimized NE offers an effective postoperative treatment with increased ocular bioavailability and improved patient compliance with a decrease in the number of installations per day and a decrease or disappearance of systemic side effects of IND.

scholarly journals Formulation and Optimization of Nanospanlastics for Improving the Bioavailability of Green Tea Epigallocatechin Gallate

2021 ◽  
Vol 14 (1) ◽  
pp. 68
Author(s):  
Eman A. Mazyed ◽  
Doaa A. Helal ◽  
Mahmoud M. Elkhoudary ◽  
Ahmed G. Abd Elhameed ◽  
Mohamed Yasser
Keyword(s):  
Drug Release ◽  
Pharmacokinetic Study ◽  
Ex Vivo ◽  
Epigallocatechin Gallate ◽  
Entrapment Efficiency ◽  
Sustained Drug Release ◽  
Ethanol Injection ◽  
23 Factorial Design ◽  
The Impact

The present study aimed to investigate the potential of nanospanlastics for boosting the bioavailability of epigallocatechin gallate (EGCG). EGCG has valuable effects like anti-inflammation, anti-oxidation, and anti-tumorigenesis. Unfortunately, it has a low oral bioavailability due to its limited permeation and poor stability. To overcome these pitfalls, EGCG was fabricated as a nanospanlastic. Nanospanlastics are flexible nanovesicles that are composed of surfactants and edge activators (EAs). EAs improve the deformability of spanlastics by acting as a destabilizing factor of their vesicular membranes. EGCG-loaded spanlastics were prepared by an ethanol injection method, according to 23 factorial design, to explore the impact of different independent variables on entrapment efficiency (EE%), % drug released after 12 h (Q12h), and particle size (PS). In vitro characterization, ex vivo intestinal permeation test, and pharmacokinetic study of the optimized formula were performed. A newly developed RP-HPLC technique was adopted for the estimation of EGCG. The optimized formula (F4) demonstrated more prolonged drug release and a significant improvement in the EE%, permeability, deformability and stability than the corresponding niosomes. The pharmacokinetic study investigated that F4 had a more sustained drug release and a higher bioavailability than the conventional niosomes and free drugs. Nanospanlastics could be a promising approach for improving the bioavailability of EGCG.

EX VIVO PERFORMANCE STUDY OF LEVOFLOXACIN OCULAR NANOPARTICLES

INDIAN DRUGS ◽  
2017 ◽  
Vol 54 (07) ◽  
pp. 23-29
Author(s):  
V. Kashikar ◽  
◽  
P. Keche ◽  
A. Kulkarni
Keyword(s):  
Zeta Potential ◽  
Ex Vivo ◽  
Polymeric Nanoparticles ◽  
Double Emulsion ◽  
Entrapment Efficiency ◽  
Ocular Delivery ◽  
Performance Study ◽  
Dose Frequency ◽  
Sustained Drug Release ◽  
Eudragit Rl

Polymeric nanoparticles (NPs) of levofloxacin prepared from Eudragit RL 100 and RS 100 have been investigated extensively for ocular delivery. We developed nanoparticles by two techniques viz. 1) solvent displacement method and 2) double emulsion method and characterized for XRD, IR, percent entrapment efficiency, polydispersity, zeta potential, ex vivo transcorneal permeation and stability. The percent transmittance of optimized formulation E1 and A2 was found to be 63.20% and 80.67%, respectively. Particle size of E1 & A2 was found to be 441.70nm and 452.10nm, respectively. The polydispersity was found to be 0.3 and 0.5, respectively. Observed zeta potential values of E1 was +22.00mV and for A2 it was +20.42mV. the values decreased as the concentration of polaxomer increased. The nanoparticles were found to show sustained drug release for more than 7h. The resulting nanoparticles were found to be stable and promising in reducing dose frequency and improving patient compliance for ocular delivery.

Novel Herbal Topical Patch Containing Curcumin and Arnica montana for the Treatment of Osteoarthritis

2020 ◽  
Vol 16 (1) ◽  
pp. 43-60 ◽  
Author(s):  
Priyanka Kriplani ◽  
Kumar Guarve ◽  
Uttam Singh Baghel
Keyword(s):  
Drug Release ◽  
Factorial Design ◽  
Analgesic Activity ◽  
Ex Vivo ◽  
Hydroxypropyl Methylcellulose ◽  
Methyl Cellulose ◽  
World Population ◽  
Jojoba Oil ◽  
Arnica Montana ◽  
Transdermal Patches

Background: Osteoarthritis (OA) ranks fifth among all forms of disability affecting 10% of the world population. Current treatments available are associated with multiple side effects and do not slow down the progression of the disease. Moreover, no such effective treatment is available to date in various systems of medicine to treat osteoarthritis. Curcumin and Arnica have shown evident clinical advances in the treatment of osteoarthritis. Objective: The aim of the present study was to design, optimize and characterize novel herbal transdermal patches of curcumin and Arnica montana using factorial design. Methods: A multiple factorial design was employed to investigate the effect of hydroxypropyl methyl cellulose, ethyl cellulose and jojoba oil on elongation and drug release. Transdermal patches were evaluated by FTIR, DSC, FESEM, ex vivo drug permeation, anti osteoarthritic activity and analgesic activity. Results: Independent variables exhibited a significant effect on the physicochemical properties of the prepared formulations. The higher values of drug release and elongation were observed with the higher concentration of hydroxypropyl methylcellulose and jojoba oil. Anti osteoarthritic activity was assessed by complete Freund's adjuvant arthritis model; using rats and analgesic activity by Eddy's hot plate method, using mice. Combination patch exhibited good anti osteoarthritic and analgesic activity as compare to individual drug patches. Conclusion: The design results revealed that the combination patch exhibited good physicochemical, anti osteoarthritic and analgesic activity for the treatment of osteoarthritis in animals. More plants and their combinations should be explored to get reliable, safe and effective formulations that can compete with synthetic drugs.

Design and Evaluation of Long Acting Biodegradable PLGA Microspheres for Ocular Drug Delivery

2019 ◽  
Vol 10 ◽  
Author(s):  
Anjali Pandya ◽  
Rajani Athawale ◽  
Durga Puro ◽  
Geeta Bhagwat
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Degradation Products ◽  
Ex Vivo ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Rational Approach ◽  
Plga Microspheres ◽  
Long Acting

Background: The research work involves development of PLGA biodegradable microspheres loaded with dexamethasome for intraocular delivery. Objective: To design and evaluate long acting PLGA microspheres for ocular delivery of dexamethasone. Method: Present formulation involves the development of long acting dexamethasone loaded microspheres composed of a biodegradable controlled release polymer, Poly(D, L- lactide-co-glycolide) (PLGA), for the treatment of posterior segment eye disorders intravitreally. PLGA with monomer ratio of 50:50 of lactic acid to glycolic acid was used to achieve a drug release up to 45 days. Quality by Design approach was utilized for designing the experiments. Single emulsion solvent evaporation technique along with high pressure homogenization was used to facilitate formation of microspheres. Results: Particle size evaluation, drug content and drug entrapment efficiency were determined for the microspheres. Particle size and morphology was observed using Field Emission Gun-Scanning Electron Microscopy (FEG-SEM) and microspheres were in the size range of 1-5 μm. Assessment of drug release was done using in vitro studies and transretinal permeation was observed by ex vivo studies using goat retinal tissues. Conclusion: Considering the dire need for prolonged therapeutic effect in diseases of the posterior eye, an intravitreal long acting formulation was designed. Use of biodegradable polymer with biocompatible degradation products was a rational approach to achieve this aim. Outcome from present research shows that developed microspheres would provide a long acting drug profile and reduce the frequency of administration thereby improving patient compliance.

Preparation, Characterization and Optimization of Irbesartan Loaded Solid Lipid Nanoparticles for Oral Delivery

2021 ◽  
pp. 97-104
Author(s):  
Kumara Swamy S ◽  
Ramesh Alli
Keyword(s):  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Oral Bioavailability ◽  
Oral Delivery ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Sustained Drug Release ◽  
Bioavailability Enhancement ◽  
Solid Lipid

The purpose of this study was to develop and evaluate irbesartan (IS) loaded solid lipid nanoparticles (SLNs; IS-SLNs) that might enhance the oral bioavailability of IS. IS, an angiotensin-receptor antagonist, used to treat hypertension. However, poor aqueous solubility and poor oral bioavailability has limited therapeutic applications of IS. Components of the SLNs include either of trimyristin/tripalmitin/tristearin/trilaurate/stearic acid/beeswax, and surfactants (Poloxamer 188 and soylecithin). The IS-SLNs were prepared by hot homogenization followed by ultrasonication method and evaluated for particle size, poly dispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE), drug content and in vitro drug release. The physical stability of optimized formulation was studied at refrigerated and room temperature for two months. The optimized IS-SLN formulation (F4) had a mean diameter of about 217.6±3.62 nm, PDI of 0.163±0.032, ZP of -28.5±4.12, assay of 99.8±0.51 and EE of 93.68±2.47%. The formulation showed sustained drug release compared with control formulation over 24 h. Optimized formulation was found to be stable over two months. IS-SLN showed nearly spherical in shape using and converted to amorphous form by DSC. Thus, the results conclusively demonstrated SLNs could be considered as an alternative delivery system for the oral bioavailability enhancement of IS.

DEVELOPMENT AND EVALUATION OF NANOPARTICULATE BASED IN-SITU GELLING SYSTEM FOR NASAL DRUG DELIVERY OF AN ANTI-EPILEPTIC DRUG

INDIAN DRUGS ◽  
2017 ◽  
Vol 54 (09) ◽  
pp. 83-85
Author(s):  
A Ambavkar ◽  
◽  
N. Desai
Keyword(s):  
Drug Release ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
Poloxamer 407 ◽  
Nasal Drug Delivery ◽  
Anti Epileptic Drug ◽  
Nanolipid Carriers ◽  
In Situ Nasal Gel

The objective of the study was to develop and evaluate nanolipid carriers based in situ gel of Carbamazepine, for brain delivery through intranasal route. The non – invasive nasal route can provide rapid delivery of drugs directly to the central nervous system by bypassing the blood brain barrier. The nanolipid carriers of carbamazepine as in situ nasal gel can prolong the drug release for control of repetitive seizures and were prepared by Phase Inversion Temperature technique. The retention of the carriers in the nasal cavity was improved by using Poloxamer 407 as thermoresponsive and Carbopol 974P as mucoadhesive gelling polymers, respectively. The developed gel was evaluated for particle size, polydispersity index, zeta potential, morphology, entrapment efficiency, mucoadhesive and thermoresponsive behaviour, in vitro drug release, ex vivo permeation and nasociliotoxicity. The gel showed sustained release over prolonged periods and was found to be non-toxic to the sheep nasal mucosa.

Sign in / Sign up

Export Citation Format

Share Document