scholarly journals Estimation of the Age of Architectural Heritage Objects by Microstructural Changes of Calcite in Lime Mortars of Ancient Brickwork and Masonry

Buildings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 240
Author(s):  
Vladimir Kotlyar ◽  
Victoria Pishchulina ◽  
Alexey N. Beskopylny ◽  
Besarion Meskhi ◽  
Yury Popov ◽  
...  
Keyword(s):  
18Th Century ◽  
Degree Of Crystallinity ◽  
Architectural Heritage ◽  
Natural Conditions ◽  
Relative Age ◽  
Lime Mortars ◽  
Powder Samples ◽  
Diffraction Patterns ◽  
Cultural Monuments ◽  
The Degree Of Crystallinity

Determining the age of ancient architectural and cultural monuments is a significant scientific problem. An approach based on the transformation of portlandite into calcite and subsequent recrystallization of calcite is considered, which allows for estimating the relative age of ancient brickworks for local groups of historic buildings based on the results of diffraction studies of powder samples of carbonate mortars and measurements of samples with a known age. This article presents the results of the study of lime mortars of ancient brickwork. Under natural conditions, the process of transformation of portlandite into calcite takes from 100 to 200 years. The rate of this process is influenced by temperature, humidity, peculiarities of interaction with carbon dioxide contained in the air, etc. Examples show that portlandite is completely transformed into calcite in masonry mortars of the 18th century and that portlandite is not found in older mortars. It was determined that after the transformation of portlandite into calcite, an increase in the degree of recrystallization of calcite is observed, which manifests itself in powder diffraction patterns in the relative broadening of the diffraction peak of calcite hkl 104. In a detailed study, an estimate of the peak width at half maximum (FWHM) associated with the degree of crystallinity is effective. The actual data are given, which show that in older lime mortars the degree of recrystallization of calcite is higher than in younger ones. This fact makes it possible to indirectly determine the relative age of brickwork and masonry of various buildings of architectural heritage, which is especially relevant for the objects with the use of lime mortars of the northern provinces of the Byzantine Oecumene and other periods of various cultures.

scholarly journals Investigation of Bioactive Glass-Ceramic 60SiO2-30CaO-10P2O5 Prepared by Hydrothermal Method

2019 ◽  
Vol 2019 ◽  
pp. 1-8
Author(s):  
Vuong Xuan Bui ◽  
Mai Quang Vo ◽  
Tien Anh Nguyen ◽  
Hoa Thi Bui
Keyword(s):  
Bioactive Glass ◽  
Hydrothermal Method ◽  
Reaction Temperature ◽  
Hydrothermal Reaction ◽  
Glass Ceramics ◽  
Degree Of Crystallinity ◽  
Apatite Phase ◽  
Powder Samples ◽  
Sbf Solution ◽  
The Degree Of Crystallinity

Bioactive glass-ceramics (BGCs) with the composition of 60SiO2-30CaO-10P2O5 (wt. %) have been synthesized by the hydrothermal method. The BGC samples were prepared at two reaction temperatures of 150 and 220°C, named BGC-150 and BGC-220. The XRD and FTIR analyses highlighted that the degree of crystallinity of BGCs increased linearly with hydrothermal reaction temperature. FE-SEM and TEM results indicated that the surface of BGC samples is covered by the nanosized particles which grow into larger sizes as a function of reaction temperature. The bioactivity of BGCs was investigated by the immersion of powder samples in the SBF solution. The results confirmed the dissolution and the interaction of BGC samples in the SBF solution which led to the formation of a new apatite phase on their surface.

EPITAFIES OF THE RELATIVES OF HADJI IBRAHIM AL-URADI AS A SOURCE ON THE BIOGRAPHY OF THE SCIENTIST AND ON THE HISTORY OF GIDATL

2017 ◽  
Vol 13 (4) ◽  
pp. 13-21
Author(s):  
Sh M Khapizov ◽  
M G Shekhmagomedov
Keyword(s):  
18Th Century ◽  
Medieval History ◽  
Historical Sources ◽  
The Past ◽  
Arabic Script ◽  
History Of ◽  
History Of Culture ◽  
The Look ◽  
Cultural Monuments ◽  
Written Sources

The article is devoted to the study of inscriptions on the gravestones of Haji Ibrahim al-Uradi, his father, brothers and other relatives. The information revealed during the translation of these inscriptions allows one to date important events from the history of Highland Dagestan. Also we can reconsider the look at some important events from the past of Hidatl. Epitaphs are interesting in and of themselves, as historical and cultural monuments that needed to be studied and attributed. Research of epigraphy data monuments clarifies periodization medieval epitaphs mountain Dagestan using record templates and features of the Arabic script. We see the study of medieval epigraphy as one of the important tasks of contemporary Caucasian studies facing Dagestani researchers. Given the relatively weak illumination of the picture of events of that period in historical sources, comprehensive work in this direction can fill gaps in our knowledge of the medieval history of Dagestan. In addition, these epigraphs are of great importance for researchers of onomastics, linguistics, the history of culture and religion of Dagestan. The authors managed to clarify the date of death of Ibrahim-Haji al-Uradi, as well as his two sons. These data, the attraction of written sources and legends allowed the reconstruction of the events of the second half of the 18th century. For example, because of the epidemic of plague and the death of most of the population of Hidatl, this society noticeably weakened and could no longer maintain its influence on Akhvakh. The attraction of memorable records allowed us to specify the dates of the Ibrahim-Haji pilgrimage to Mecca and Medina, as well as the route through which he traveled to these cities.

scholarly journals Preparation and Characterization of Talc Filled Thermoplastic Polyurethane/Polypropylene Blends

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Emi Govorčin Bajsić ◽  
Vesna Rek ◽  
Ivana Ćosić
Keyword(s):  
Thermal Properties ◽  
Thermoplastic Polyurethane ◽  
Mechanical Analysis ◽  
Degree Of Crystallinity ◽  
Scanning Calorimetry ◽  
Polypropylene Blends ◽  
Pp Blends ◽  
The Degree Of Crystallinity ◽  
Better Than

The effect of the addition of talc on the morphology and thermal properties of blends of thermoplastic polyurethane (TPU) and polypropylene (PP) was investigated. The blends of TPU and PP are incompatible because of large differences in polarities between the nonpolar crystalline PP and polar TPU and high interfacial tensions. The interaction between TPU and PP can be improved by using talc as reinforcing filler. The morphology was observed by means of scanning electron microscopy (SEM). The thermal properties of the neat polymers and unfilled and talc filled TPU/PP blends were studied by using dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The addition of talc in TPU/PP blends improved miscibility in all investigated TPU/T/PP blends. The DSC results for talc filled TPU/PP blends show that the degree of crystallinity increased, which is due to the nucleating effect induced by talc particles. The reason for the increased storage modulus of blends with the incorporation of talc is due to the improved interface between polymers and filler. According to TGA results, the addition of talc enhanced thermal stability. The homogeneity of the talc filled TPU/PP blends is better than unfilled TPU/PP blends.

The Influence of the Degree of Crystallinity on the Glass Transition Temperature of Polymers

2013 ◽  
Vol 864-867 ◽  
pp. 751-754 ◽  
Author(s):  
Andrey Askadskii ◽  
Marina Popova ◽  
Tatyana Matseevich ◽  
Elena Kurskaya
Keyword(s):  
Glass Transition ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Degree Of Crystallinity ◽  
Low Degrees ◽  
The Degree Of Crystallinity

The influence of the degree of crystallinity of polymers on the glass transition temperature Tg of their amorphous domains is quantitatively analyzed. The analysis is made based on the Mandelkerns ideas [ concerning the restrictive effect of crystallization on the mobility of macromolecules within the amorphous domains. At low degrees of crystallinity, Tg of amorphous domains slowly increases, and then increases much faster at high degrees of crystallinity.

Study of the Activated Charcoal Structure from Water Hyacinth Based on Carbonization Temperature Variations and Activators

2021 ◽  
Vol 1028 ◽  
pp. 326-330
Author(s):  
Otong Nurhilal ◽  
Sahrul Hidayat ◽  
Dadan Sumiarsa ◽  
Maykel Manawan ◽  
Risdiana
Keyword(s):  
Carbon Material ◽  
Activated Charcoal ◽  
Water Hyacinth ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Lithium Sulfur Batteries ◽  
Amorphous Structures ◽  
Degree Of Graphitization ◽  
The Degree Of Crystallinity

The quality of the carbon material for application of electrodes in the battery is indicated by its ability to intercalate ions, atoms or molecules. Graphite is a carbon material with good intercalation capability. In this research, a carbon material in the form of activated charcoal produced from biomass of water hyacinth has been prepared, which is carbonized at various temperatures of 400, 500, and 600 °C with three different activators of ZnCl2, KOH and H3PO4. The activated charcoal will be used as a cathode composite in lithium sulfur batteries. To determine the quality of the activated charcoal, the structure properties of activated charcoal were characterized using X-ray diffraction (XRD). Several parameters that are determined from XRD data included the degree of crystallinity, and the degree of graphitization (Y). The degree of crystallinity was found in the ranges between 5.56 and 12.6%, where activated charcoal was dominated by amorphous structures. The value of the degree of graphitization was about 36%.

Study of structural and morphological changes during acсelerated oxidative degradation of mixtures of polyoxybutyrate with polycaprolactane

2021 ◽  
Vol 5 ◽  
pp. 60-69
Author(s):  
V. N. Vasilets ◽  
◽  
A. P. Pankina ◽  
E. A. Nemets ◽  
V. Yu. Belov ◽  
...  
Keyword(s):  
Morphological Changes ◽  
Oxidative Degradation ◽  
Initial Mixture ◽  
Polymer Composite Material ◽  
Degree Of Crystallinity ◽  
Fenton Reagent ◽  
Dsc Method ◽  
The Degree Of Crystallinity ◽  
Composite Samples ◽  
Scanning Electron

Structural and morphological changes in the films of poly(oxybirutyrate-co-oxyvalerate) (P(OB-OV)) with poly-e-caprolactone (PCL) were studied by IR spectroscopy, DSC, and scanning electron microscopy during accelerated oxidative degradation under tests in Fenton reagent. It is shown by the DSC method that the phase separation of the P(OB-OV) and PCL components is observed in the initial mixture. The melting of various phases of P(OB-OV) is observed at temperatures of 147 °C and 157 °C, and PCL melts at a temperature of 61 °C. The degree of crystallinity of P(OB-OV) and PCL in the mixture is 67 % and 50 %, respectively. It was found that the degradation of poly(oxybirutyrate-co-oxyvalerate) prevails during incubation of composite samples in Fenton solution for 2 to 12 weeks. By changing the ratio of the components, it is possible to significantly change the rate of oxidative degradation, the molecular weight and the degree of crystallinity of the polymer composite material P(OB-OV):PCL.

Preparation of Chitin Whisker and Effect to Crystallization of Polylactide

2018 ◽  
Vol 773 ◽  
pp. 82-87
Author(s):  
Nichaphat Passornraprasit ◽  
Wanpen Tachaboonyakiat
Keyword(s):  
Phase Separation ◽  
Transition Temperature ◽  
Nanocomposite Films ◽  
Degree Of Crystallinity ◽  
Thermal Transition ◽  
Hydrolysis Time ◽  
Film Extrusion ◽  
Agglomeration Of Nanoparticles ◽  
Acidolysis Reaction ◽  
The Degree Of Crystallinity

The aim of this study was to investigate the effect of chitin whisker (CW) to the crystallization of polylactide (PLA) nanocomposite films. CW which obtained from acidolysis reaction was compounded with PLA pellets into nanocomposite films by cast film extrusion. The morphology and crystallinity of CW were observed by TEM and XRD, illustrated that the dimension of whisker was affected by hydrolysis time. Increasing of hydrolysis time, the length of whisker was more regular with narrower distribution. Moreover, the crystallinity of whisker was obviously increased after acid hydrolysis. The nanocomposite film showed rough surface compared to pure PLA film due to some agglomeration of nanoparticles. However, CW and PLA were well-mixed with no phase separation. The introduction of 0.1 phr of CW decrease cold-crystallization temperature (Tcc) from about 121 °C to 118 °C and also increase the degree of crystallinity around 10%. There was no difference of thermal transition temperature between pure PLA and nanocomposite films with the addition of CW more than 0.1 phr which inspected by DSC. Despite the transition temperature express insignificantly different, the degree of crystallinity of nanocomposite was increase, indicating that chitin whisker would induce the crystallinity of PLA.

Effects of the Different Crystallization Time on Synthesis of Zeolite 4A from by-Products of Polysilicon Production Process

2011 ◽  
Vol 347-353 ◽  
pp. 246-251
Author(s):  
Xing Yong Liu ◽  
Min Li ◽  
Hong Chen ◽  
Wei Wei
Keyword(s):  
Production Process ◽  
Degree Of Crystallinity ◽  
Crystallization Time ◽  
Crystallinity Degree ◽  
Structure Morphology ◽  
Zeolite 4A ◽  
Single Structure ◽  
Ft Ir ◽  
The Degree Of Crystallinity ◽  
By Products

Pure form,single phase and high crystalline zeolite 4A samples were synthesized during hydrothermal treatment of by-products in polysilicon production process. The effects of the different crystallization time on the degree of crystallinity, skeleton structure, morphology, size of the particle and its distribution of zeolite 4A samples were investigated using XRD,FT-IR,SEM and Zetasizer. The results indicated that the zeolite 4A sample featured high crystallinity degree, excellent dispersivity, high purity and single structure.

Sign in / Sign up

Export Citation Format

Share Document