scholarly journals The Hydraulic Cavitation Affected by Nanoparticles in Nanofluids

Computation ◽  
2018 ◽  
Vol 6 (3) ◽  
pp. 44 ◽  
Author(s):  
Min-Rui Chen ◽  
Jin-Yuan Qian ◽  
Zan Wu ◽  
Chen Yang ◽  
Zhi-Jiang Jin ◽  
...  
Keyword(s):  
Saturated Vapor Pressure ◽  
Saturated Vapor ◽  
Geometric Model ◽  
Perforated Plate ◽  
Operating Conditions ◽  
Heat Transfer Medium ◽  
Operation Conditions ◽  
Flow Through ◽  
Small Bubbles ◽  
Crucial Condition

When liquids flow through a throttling element, the velocity increases and the pressure decreases. At this point, if the pressure is below the saturated vapor pressure of this liquid, the liquid will vaporize into small bubbles, causing hydraulic cavitation. In fact, a vaporization nucleus is another crucial condition for vaporizing, and particles contained in the liquid can also work as the vaporization nuclear. As a novel heat transfer medium, nanofluids have attracted the attention of many scholars. The nanoparticles contained in the nanofluids play a significant role in the vaporization of liquids. In this paper, the effects of the nanoparticles on hydraulic cavitation are investigated. Firstly, a geometric model of a perforated plate, the throttling element in this paper, is established. Then with different nanoparticle volume fractions and diameters, the nanofluids flowing through the perforated plate are numerically simulated based on a validated numerical method. The operation conditions, such as the ratio of inlet to outlet pressures and the temperature are the considered variables. Additionally, cavitation numbers under different operating conditions are achieved to investigate the effects of nanoparticles on hydraulic cavitation. Meanwhile, the contours are extracted to research the distribution of bubbles for further investigation. This study is of interest for researchers working on hydraulic cavitation or nanofluids.

scholarly journals Effects of nanoparticles on hydraulic cavitation

2018 ◽  
Vol 240 ◽  
pp. 03004
Author(s):  
Min-rui Chen ◽  
Jin-yuan Qian ◽  
Zan Wu ◽  
Chen Yang ◽  
Zhi-jiang Jin ◽  
...  
Keyword(s):  
Vapor Pressure ◽  
Saturated Vapor Pressure ◽  
Saturated Vapor ◽  
Geometric Model ◽  
Pressure Ratio ◽  
Perforated Plate ◽  
Significant Parameter ◽  
Operation Conditions ◽  
Small Bubbles ◽  
Crucial Condition

When liquids flowing through a throttling element, such as a perforated plate, the velocity increases and the pressure decreases. If the pressure is below the saturated vapor pressure, the liquid will vaporize into small bubbles, which is called hydraulic cavitation. In fact, vaporization nucleus is another crucial condition for vaporizing. The nanoparticles contained in the nanofluids play a significant role in vaporization of liquids. In this paper, the effects of the nanoparticles on hydraulic cavitation are investigated. Firstly, a geometric model of a pipe channel equipped with a perforated plate is established. Then with different nanoparticle volume fractions and diameters, the nanofluids flowing through the channel is numerically simulated based on a validated numerical method. The operation conditions, such as the temperature and the pressure ratio of inlet to outlet, are the considered variables. As a significant parameter, cavitation numbers under different operation conditions are achieved to investigate the effects of nanoparticles on hydraulic cavitation. Meanwhile, the contours are extracted to research the distribution of bubbles for further investigation. This study is of interests for researchers working on hydraulic cavitation or nanofluids.

The Effect of Temperature on Water Cavitation Phenomena in Converging-Diverging Nozzle Flow

2017 ◽  
Author(s):  
Zayed Ahmed ◽  
B. Terry Beck ◽  
Mohammad H. Hosni
Keyword(s):  
Liquid Phase ◽  
Vapor Pressure ◽  
Saturated Vapor Pressure ◽  
Saturated Vapor ◽  
New Technology ◽  
Phase Region ◽  
Operating Conditions ◽  
Working Fluid ◽  
Absolute Pressure ◽  
Two Phase

A vapor-compression refrigeration cycle typically uses standard refrigerants as the working fluid. Traditional refrigerants, however, have been associated with Ozone level Depletion Potential (ODP) and significant Global Warming Potential (GWP). An innovative cooling technology has been investigated using sonic multi-phase flow in a critical-flow nozzle to create a low-pressure and low-temperature region for heat absorption. The strength of the new technology is its potential to produce cooling using water and/or other working fluids with low ODP and GWP. While the full potential for using water as the working fluid may not be fully-realized, because of property limitations still under investigation, water still provides a very useful media for investigating the underlying cavitation phenomena for the development of the new technology. As part of ongoing research into the potential cooling capacity of the cavitation phenomena, cavitation in a converging-diverging nozzle is being investigated using water as the working fluid. Cavitation in a fluid is the formation of the vapor phase from the liquid phase by reduction in the pressure of the fluid below its saturated vapor pressure. Due to the constricting nature of the throat of a converging-diverging nozzle, the liquid water velocity at the throat is increased and the local absolute pressure can drop to values below the saturated vapor pressure of water at a given temperature; thus, causing the fluid to cavitate. The effect of water temperature on both the onset of the cavitation within the nozzle, and the resulting length of the cavitation region within the nozzle, are the subject of the current paper. Flow Visualization using a high speed digital camera under these different operating conditions was aimed at investigating the region of cavitation onset, which also appears to be associated with the region of boundary layer separation just downstream of the throat of the nozzle. The length of the two phase region at different operating temperatures was measured and it was observed that as the temperature of the fluid was increased, the length of two-phase region before it condensed into single-phase liquid became longer. Experimental results and analysis are presented which also show that near the onset of cavitation, the flowrate can likely go well beyond a choking condition without cavitating, and can remain in this metastable state for an extended amount of time before nucleating (cavitating) into a stable state. In particular, analysis indicates that significantly negative absolute pressures can likely be achieved within the nozzle, suggesting the presence of tension in the liquid phase just prior to cavitation.

Finite Element Analysis on Frame of Rice Transplanting Mechanism at Different Operation Conditions

2013 ◽  
Vol 455 ◽  
pp. 202-206
Author(s):  
Chun Lan Mo ◽  
Wei Guan ◽  
Guan Yan Huang ◽  
Yong Juan Lu ◽  
Wen Zhong
Keyword(s):  
Design Theory ◽  
Geometric Model ◽  
Operating Conditions ◽  
Frame Structure ◽  
Element Analysis ◽  
Operation Conditions ◽  
New Type ◽  
Strength And Stiffness ◽  
Heavy Loads ◽  
Sufficient Strength

Frame is the basic component of rice transplanting mechanism, which needs sufficient strength and stiffness because the frame often endures heavy loads and hits on poor working conditions. The UG geometric model of design frame was imported into the ANSYS for meshing. Reasonable constraint conditions and load were imposed, and the most significant four operating conditions of the frame were analyzed though static method. The stress-strain contours of the frame were obtained. The analyzed result provides design theory for the new type frame of rice transplanting mechanism and reference for the rebuilding and optimizing of the frame structure.

Stabilization of the Speed of the Hydraulic Motor Through Throttle Compensation for Volume Losses

2020 ◽  
Vol 26 (3) ◽  
pp. 126-130
Author(s):  
Krasimir Kalev
Keyword(s):  
Flow Rate ◽  
Hydraulic Drive ◽  
Pressure Change ◽  
Operating Conditions ◽  
Drive System ◽  
Inlet Pressure ◽  
Schematic Diagram ◽  
Hydraulic Characteristics ◽  
Hydraulic Motor ◽  
Flow Through

AbstractA schematic diagram of a hydraulic drive system is provided to stabilize the speed of the working body by compensating for volumetric losses in the hydraulic motor. The diagram shows the inclusion of an originally developed self-adjusting choke whose flow rate in the inlet pressure change range tends to reverse - with increasing pressure the flow through it decreases. Dependent on the hydraulic characteristics of the hydraulic motor and the specific operating conditions.

scholarly journals A Tamper-Resistant Algorithm Using Blockchain for the Digital Tachograph

Electronics ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 581
Author(s):  
Yongbae Kim ◽  
Juyong Back ◽  
Jongweon Kim
Keyword(s):  
Wireless Communication ◽  
Statistical Tests ◽  
Operating Conditions ◽  
External Memory ◽  
Data Recording ◽  
Storage Devices ◽  
Suggested Algorithm ◽  
Operation Conditions ◽  
Before And After ◽  
Verification Test

A tachograph in a vehicle records the vehicle operating conditions, such as speed, distance, brake operation conditions, acceleration, GPS information, etc., in intervals of one second. For accidents, the tachograph records information, such as the acceleration and direction of a vehicle traveling in intervals of 1/100 s for 10 s before and after the accident occurs as collision data. A vehicle equipped with a tachograph is obliged to upload operation data to administrative organizations periodically via other auxiliary storage devices like a USB attached external memory or online wireless communication. If there is a problem with the recorded contents, data may be at risk of being tampered with during the uploading process. This research proposed tamper-resistant technology based on blockchain for data in online and offline environments. The suggested algorithm proposed a new data recording mechanism that operates in low-level hardware of digital tachographs for tamper-resistance in light blockchains and on/offline situations. The average encoding time of the proposed light blockchain was 1.85 ms/Mb, while the average decoding time was 1.65 ms/Mb. With the outliers in statistical tests removed, the estimated average encoding and decoding time was 1.32 ms/Mb and 1.29 ms/Mb, respectively, and the tamper verification test detected all the tampered data.

scholarly journals Modeling of a Real-Life Industrial Reactor for Hydrogenation of Benzene Process

Catalysts ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 412
Author(s):  
Mirosław K. Szukiewicz ◽  
Krzysztof Kaczmarski
Keyword(s):  
Catalyst Activity ◽  
Real Life ◽  
Operating Conditions ◽  
Reactor Operation ◽  
Reactor Model ◽  
High Scale ◽  
Industrial Reactor ◽  
Knowledge Based ◽  
Operation Conditions ◽  
Insight Into

A dynamic model of the hydrogenation of benzene to cyclohexane reaction in a real-life industrial reactor is elaborated. Transformations of the model leading to satisfactory results are presented and discussed. Operating conditions accepted in the simulations are identical to those observed in the chemical plant. Under those conditions, some components of the reaction mixture vanish, and the diffusion coefficients of the components vary along the reactor (they are strongly concentration-dependent). We came up with a final reactor model predicting with reasonable accuracy the reaction mixture’s outlet composition and temperature profile throughout the process. Additionally, the model enables the anticipation of catalyst activity and the remaining deactivated catalyst lifetime. Conclusions concerning reactor operation conditions resulting from the simulations are presented as well. Since the model provides deep insight into the process of simulating, it allows us to make knowledge-based decisions. It should be pointed out that improvements in the process run, related to operating conditions, or catalyst application, or both on account of the high scale of the process and its expected growth, will remarkably influence both the profits and environmental protection.

scholarly journals Study on a Quaternary Working Pair of CaCl2-LiNO3-KNO3/H2O for an Absorption Refrigeration Cycle

Entropy ◽  
2019 ◽  
Vol 21 (6) ◽  
pp. 546 ◽  
Author(s):  
Yiqun Li ◽  
Na Li ◽  
Chunhuan Luo ◽  
Qingquan Su
Keyword(s):  
Heat Capacity ◽  
Crystallization Temperature ◽  
Saturated Vapor Pressure ◽  
Saturated Vapor ◽  
Specific Enthalpy ◽  
Refrigeration Cycle ◽  
Absorption Refrigeration ◽  
Evaporation Temperature ◽  
Corrosion Rates ◽  
Specific Entropy

When compared with LiBr/H2O, an absorption refrigeration cycle using CaCl2/H2O as the working pair needs a lower driving heat source temperature, that is, CaCl2/H2O has a better refrigeration characteristic. However, the crystallization temperature of CaCl2/H2O solution is too high and its absorption ability is not high enough to achieve an evaporation temperature of 5 °C or lower. CaCl2-LiNO3-KNO3(15.5:5:1)/H2O was proposed and its crystallization temperature, saturated vapor pressure, density, viscosity, specific heat capacity, specific entropy, and specific enthalpy were measured to retain the refrigeration characteristic of CaCl2/H2O and solve its problems. Under the same conditions, the generation temperature for an absorption refrigeration cycle with CaCl2-LiNO3-KNO3(15.5:5:1)/H2O was 7.0 °C lower than that with LiBr/H2O. Moreover, the cycle’s COP and exergy efficiency with CaCl2-LiNO3-KNO3(15.5:5:1)/H2O were approximately 0.04 and 0.06 higher than those with LiBr/H2O, respectively. The corrosion rates of carbon steel and copper for the proposed working pair were 14.31 μm∙y−1 and 2.04 μm∙y−1 at 80 °C and pH 9.7, respectively, which were low enough for engineering applications.

scholarly journals Alginate/porous silica matrices for the encapsulation of living organisms: tunable properties for biosensors, modular bioreactors, and bioremediation devices

2015 ◽  
Vol 2 (1) ◽  
Author(s):  
Mercedes Perullini ◽  
Mariano Calcabrini ◽  
Matías Jobbágy ◽  
Sara A. Bilmes
Keyword(s):  
Physical Stability ◽  
Porous Silica ◽  
Biological Response ◽  
Optical Quality ◽  
Operating Conditions ◽  
Radius Of Gyration ◽  
Host Matrix ◽  
Operation Conditions ◽  
Step Procedure ◽  
Living Organisms

Abstract:The encapsulation of living cells within inorganic silica hydrogels is a promising strategy for the design of biosensors, modular bioreactors, and bioremediation devices, among other interesting applications, attracting scientific and technological interest. These hostguest multifunctional materials (HGFM) combine synergistically specific biologic functions of their guest with those of the host matrix enhancing their performance. Although inorganic immobilization hosts present several advantages over their (bio)polymer-based counterparts in terms of chemical and physical stability, the direct contact of cells with silica precursors during synthesis and the constraints imposed by the inorganic host during operating conditions have proved to influence their biological response. Recently, we proposed an alternative two-step procedure including a pre-encapsulation in biocompatible polymers such as alginates in order to confer protection to the biological guest during the inorganic and more cytotoxic synthesis. By means of this procedure, whole cultures of microorganisms remain confined in small liquid volumes generated inside the inorganic host, providing near conventional liquid culture conditions.Moreover, the fact of protecting the biological guest during the synthesis of the host, allows extending the synthesis parameters beyond biocompatible conditions, tuning the microstructure of the matrix. In turn, the microstructure (porosity at the nanoscale, radius of gyration of particles composing the structure, and fractal dimension of particle clusters) is determinant of macroscopic parameters, such as optical quality and transport properties that govern the encapsulation material’s performance. Here, we review the most interesting applications of the two-step procedure, making special emphasis on the optimization of optical, transport and mechanical properties of the host as well as in the interaction with the guest during operation conditions.

Modeling Heat and Mass Transfer Correlations for Flow Through Micro Channels in Monolith Honeycomb Catalytic Combustor

2009 ◽  
Author(s):  
Juan Yin ◽  
Yi-wu Weng
Keyword(s):  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Catalytic Combustion ◽  
Operating Conditions ◽  
Performance Characteristics ◽  
Predicting Performance ◽  
Micro Channels ◽  
Characteristics Analysis ◽  
Flow Through ◽  
Catalytic Combustor

This paper investigated performance characteristics analysis of catalytic combustion by utilizing 1-D models incorporated heat and mass transfer correlations. The 1-D numerical results were compared with 2-D models studies and experimental data. The performance characteristics were mainly the effects of operating conditions on methane conversion rate. The comparable analysis confirmed that 1-D model can success in predicting performance of catalytic combustion when empiric inter-phase heat and mass transfer correlations are used and appropriate operating conditions are chosen.

Sign in / Sign up

Export Citation Format

Share Document