scholarly journals A Frequency and Radiation Pattern Combo-Reconfigurable Novel Antenna for 5G Applications and Beyond

Electronics ◽  
2020 ◽  
Vol 9 (9) ◽  
pp. 1372
Author(s):  
Muhammad Kamran Shereen ◽  
Muhammad Irfan Khattak ◽  
Mu’ath Al-Hasan
Keyword(s):  
Radiation Pattern ◽  
Beam Steering ◽  
Beam Width ◽  
Antenna System ◽  
Oxide Semiconductor ◽  
Control Surface ◽  
Nmos Transistor ◽  
Steering Angle ◽  
Resonant Frequencies ◽  
Fifth Generation

This paper presents a novel combo-reconfigurable architecture for the frequency and radiation patterning of a novel antenna system for future fifth-generation (5G) millimeter-wave mobile communication. The tuning system independently controls the frequency and radiation pattern shifts, without letting them affect each other. The proposed antenna consists of two patches, radiating at 28 GHz and 38 GHz. A negative-channel metal–oxide–semiconductor (NMOS) transistor was used as a switch for ON/OFF states. Frequency reconfiguration was controlled by switches SD1 and SD2, while pattern reconfigurability was achieved by SD3–SD18. The desired resonant frequencies of 28 GHz and 38 GHz were achieved by varying patch dimensions through the ON and OFF states of the SD1 and SD2 switches. Similarly, parasitic stubs on the ground are used to control surface currents, which results in pattern reconfiguration. The results were analyzed for 18 different combinations of the switch states. Adding/removing parasitic stubs and switches changed the beam steering angle (by 45° shift) from 0° to 180°, which modified the stub dimensions and changed the beam-width of the main lobe.

scholarly journals 2D Optical Phased Arrays for Laser Beam Steering Based on 3D Polymer Photonic Integrated Circuits

2021 ◽  
Author(s):  
Adam Raptakis ◽  
Lefteris Gounaridis ◽  
Madeleine Weigel ◽  
Moritz Kleinert ◽  
Michalis Georgiopoulos ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Phased Arrays ◽  
Photonic Integrated Circuits ◽  
Beam Steering ◽  
Beam Width ◽  
Phase Shifters ◽  
Beam Scanning ◽  
Steering Angle ◽  
Experimental Proof ◽  
Optical Phased Arrays

We propose a novel concept for the implementation of 2-dimensional (2D) optical phased arrays (OPAs) with end-fire waveguides as antenna elements (AEs), and we present its theoretical model and experimental proof. The concept is based on the use of 3-dimensional (3D) photonic integrated circuits (PICs) with multiple waveguiding layers on the PolyBoard platform. In their simplest form, the 3D PICs comprise AEs at different layers, vertical and lateral couplers for the distribution of light among the AEs, and phase shifters for the execution of the 2D beam scanning process. Using the field equivalence principle, we model the radiated field from the single-mode waveguide of the platform at 1550 nm, and we find that the expected beam width is 12.7<sup>o</sup>. We also investigate the perturbation that is induced into propagating fields inside parallel waveguides in proximity, and we conclude that waveguide spacings down to 6 µm can be safely used for development of uniform OPAs in the PolyBoard platform. For OPAs with 6 µm pitch and 4 AEs, we find that the maximum steering angle is 14.0<sup>o</sup> and the expected angular clearance, wherein the main radiation lobe is higher than any grating lobe by at least 3, 6 and 10 dB is 10.8<sup>o</sup>, 7.6<sup>o</sup> and 2.8<sup>o</sup>, respectively. Based on our simulations, we design and fabricate single- and 2-layer PICs with 1×4 and 2×4 OPAs. The lateral pitch of the OPAs ranges from 10 down to 6 µm, while the vertical pitch is 7.2 µm. We experimentally characterize these OPAs and validate the potential of the 2-layer PICs for 2D beam scanning on the azimuthal and elevation plane. The beam profiles and the main scanning parameters such as the maximum steering angle and the relative intensity between the main and the grating lobes are found in excellent agreement with our simulations.

scholarly journals Beam Steering Investigation on Multiple Antenna System using Radiation Pattern Reconfigurable Array

2021 ◽  
Author(s):  
Jaya Bharath ◽  
Thennarasan Sabapathy ◽  
Muzammil Jusoh ◽  
Hasliza A Rahim ◽  
Muhammad Ramlee Kamarudin ◽  
...  
Keyword(s):  
Radiation Pattern ◽  
Beam Steering ◽  
Antenna System ◽  
Multiple Antenna ◽  
Reconfigurable Array ◽  
Multiple Antenna System

scholarly journals 2D Optical Phased Arrays for Laser Beam Steering Based on 3D Polymer Photonic Integrated Circuits

2021 ◽  
Author(s):  
Adam Raptakis ◽  
Lefteris Gounaridis ◽  
Madeleine Weigel ◽  
Moritz Kleinert ◽  
Michalis Georgiopoulos ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Phased Arrays ◽  
Photonic Integrated Circuits ◽  
Beam Steering ◽  
Beam Width ◽  
Phase Shifters ◽  
Beam Scanning ◽  
Steering Angle ◽  
Experimental Proof ◽  
Optical Phased Arrays

We propose a novel concept for the implementation of 2-dimensional (2D) optical phased arrays (OPAs) with end-fire waveguides as antenna elements (AEs), and we present its theoretical model and experimental proof. The concept is based on the use of 3-dimensional (3D) photonic integrated circuits (PICs) with multiple waveguiding layers on the PolyBoard platform. In their simplest form, the 3D PICs comprise AEs at different layers, vertical and lateral couplers for the distribution of light among the AEs, and phase shifters for the execution of the 2D beam scanning process. Using the field equivalence principle, we model the radiated field from the single-mode waveguide of the platform at 1550 nm, and we find that the expected beam width is 12.7<sup>o</sup>. We also investigate the perturbation that is induced into propagating fields inside parallel waveguides in proximity, and we conclude that waveguide spacings down to 6 µm can be safely used for development of uniform OPAs in the PolyBoard platform. For OPAs with 6 µm pitch and 4 AEs, we find that the maximum steering angle is 14.0<sup>o</sup> and the expected angular clearance, wherein the main radiation lobe is higher than any grating lobe by at least 3, 6 and 10 dB is 10.8<sup>o</sup>, 7.6<sup>o</sup> and 2.8<sup>o</sup>, respectively. Based on our simulations, we design and fabricate single- and 2-layer PICs with 1×4 and 2×4 OPAs. The lateral pitch of the OPAs ranges from 10 down to 6 µm, while the vertical pitch is 7.2 µm. We experimentally characterize these OPAs and validate the potential of the 2-layer PICs for 2D beam scanning on the azimuthal and elevation plane. The beam profiles and the main scanning parameters such as the maximum steering angle and the relative intensity between the main and the grating lobes are found in excellent agreement with our simulations.

scholarly journals Design of a SIW Variable Phase Shifter for Beam Steering Antenna Systems

Electronics ◽  
2019 ◽  
Vol 8 (9) ◽  
pp. 1013 ◽  
Author(s):  
Sara Salem Hesari ◽  
Jens Bornemann
Keyword(s):  
Reflection Coefficient ◽  
Radiation Pattern ◽  
Phase Shifter ◽  
Beam Steering ◽  
Antenna System ◽  
Far Field ◽  
Cross Polarization ◽  
Varactor Diodes ◽  
Field Radiation ◽  
Better Than

This paper proposes a new beam steering antenna system consisting of two variable reflection-type phase shifters, a 3 dB coupler, and a 90° phase transition. The entire structure is designed and fabricated on a single layer of substrate integrated waveguide (SIW), which makes it a low loss and low-profile antenna system. Surface mount tuning varactor diodes are chosen as electrical phase control elements. By changing the biasing voltage of the varactor diodes in the phase shifter circuits, the far-field radiation pattern of the antenna steers from −25° to 25°. The system has a reflection coefficient better than −10 dB for a 2 GHz bandwidth centered at 17 GHz, a directive radiation pattern with a maximum of 10.7 dB gain at the mid-band frequency, and cross polarization better than 20 dB. A prototype is fabricated and measured for design verification. The measured far-field radiation patterns, co and cross polarization, and the reflection coefficient of the antenna system agree with simulated results.

A compact omnidirectional to directional frequency reconfigurable antenna for wireless sensor network applications

2021 ◽  
pp. 1-12
Author(s):  
Melvin Chamakalayil Jose ◽  
Radha Sankararajan ◽  
Balakrishnapillai Suseela Sreeja ◽  
Mohammed Gulam Nabi Alsath ◽  
Pratap Kumar
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Radiation Pattern ◽  
Antenna System ◽  
Wireless Sensor ◽  
Dual Band ◽  
Design Parameters ◽  
Pin Diodes ◽  
Band Frequency ◽  
Directional Radiation

Abstract In the proposed research paper, a novel compact, ultra-wideband electronically switchable dual-band omnidirectional to directional radiation pattern microstrip planar printed rectangular monopole antenna (PRMA) has been presented. The proposed antenna system has an optimum size of 0.26 λ0 × 0.28 λ0. A combination of radiators, reflectors, and two symmetrical grounds does place on the same layer of the rectangular microstrip PRMA. The frequency agility and the radiation pattern from omnidirectional to directional are achieved using two SMD PIN diodes (SMP1340-04LF). The directional radiation patterns with 180° phase shifts are achieved at the C-band frequency spectrum. The parametric study of the proposed antenna system was performed for different design parameters, and the antenna characteristics were analyzed. An antenna prototype is fabricated using the printed circuit board etching method by using RMI UV laser etching and cutting tools. The measurements of the proposed antenna are conducted in an anechoic chamber to validate the simulations. There are three states of operations due to two SMD PIN diodes being used in switching circuits. In state-I, the proposed antenna radiates at 6.185 GHz (5.275–6.6 75 GHz) in the Ф = 270° direction with a gain of 2.1 dBi, whereas in state-II, it radiates at 5.715 GHz (5.05–6.8 GHz) in the Ф = 90° direction with a gain of 2.1 dBi. In state-III, the antenna exhibits the X-band frequency with center frequency at 9.93 GHz (8.845–10.49 GHz), and the omnidirectional pattern offers a gain of 4.1 dBi. The features of the proposed antenna are suitable for high-speed wireless sensor network communication in industries such as chemical reactors in oil and gas and pharmaceuticals. It is also well suited for IoT and 5G-sub-6-GHz applications.

scholarly journals Characterization of Tiled Architecture for C-Band 1-Bit Beam-Steering Transmitarray

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1259
Author(s):  
Dmitry Kozlov ◽  
Irina Munina ◽  
Pavel Turalchuk ◽  
Vitalii Kirillov ◽  
Alexey Shitvov ◽  
...  
Keyword(s):  
Communication Systems ◽  
Beam Steering ◽  
Unit Cell ◽  
Electromagnetic Simulations ◽  
Fifth Generation ◽  
Full Wave ◽  
Array Architecture ◽  
Modulation Pattern ◽  
Good Agreement

A new implementation of a beam-steering transmitarray is proposed based on the tiled array architecture. Each pixel of the transmitarray is manufactured as a standalone unit which can be hard-wired for specific transmission characteristics. A set of complementary units, providing reciprocal phase-shifts, can be assembled in a prescribed spatial phase-modulation pattern to perform beam steering and beam forming in a broad spatial range. A compact circuit model of the tiled unit cell is proposed and characterized with full-wave electromagnetic simulations. Waveguide measurements of a prototype unit cell have been carried out. A design example of a tiled 10 × 10-element 1-bit beam-steering transmitarray is presented and its performance benchmarked against the conventional single-panel, i.e., unibody, counterpart. Prototypes of the tiled and single-panel C-band transmitarrays have been fabricated and tested, demonstrating their close performance, good agreement with simulations and a weak effect of fabrication tolerances. The proposed transmitarray antenna configuration has great potential for fifth-generation (5G) communication systems.

Smart DRA for beam width and orientation control

Frequenz ◽  
2020 ◽  
Vol 74 (11-12) ◽  
pp. 383-392
Author(s):  
Rajveer S. Yaduvanshi ◽  
Richa Gupta ◽  
Saurabh Katiyar
Keyword(s):  
Radiation Pattern ◽  
High Efficiency ◽  
Beam Width ◽  
Beam Control ◽  
Design Flexibility ◽  
Compact Size ◽  
Close Proximity ◽  
Cellular Communication Network ◽  
Arc Shape ◽  
Broadside Radiation

AbstractSmartdielectric resonator antenna (DRA) having beam control mechanism is anew area to be explored by antenna researchers. Proposed new geometry DRA has low loss, design flexibility, high efficiency, compact size and desired radiated beam control. Developing beam control in new geometry DRAs is investigated for the first time in this letter. Unique technique for beam control and beam width control is proposed using pit top and mount top DRA. Gain is controlled from 5.0 to 9.98 dBi and beam is controlled from ±30° to ±70° in broadside radiation pattern. U shape pit DRA has maximum directive gain of 9.98 dBi and efficiency 98% at 5.8 GHz frequency. Measured and simulated results of radiation pattern and reflection coefficient are found to be in close proximity. Hardware of U shape pit top DRA, mount top DRA, left side arc top DRA, right side arc shape top DRA is developed and investigated. Mobile and cellular communication network need wide coverage, hence large beam width is required. Narrowing of beam width at higher order mode is also achieved.

scholarly journals Phase-only transmissive spatial light modulator based on tunable dielectric metasurface

Science ◽  
2019 ◽  
Vol 364 (6445) ◽  
pp. 1087-1090 ◽  
Author(s):  
Shi-Qiang Li ◽  
Xuewu Xu ◽  
Rasna Maruthiyodan Veetil ◽  
Vytautas Valuckas ◽  
Ramón Paniagua-Domínguez ◽  
...  
Keyword(s):  
High Resolution ◽  
Spatial Light Modulator ◽  
Deflection Angle ◽  
Beam Steering ◽  
Beam Deflection ◽  
Spatial Light Modulators ◽  
Light Modulator ◽  
Steering Angle ◽  
Holographic Display ◽  
Light Modulators

Rapidly developing augmented reality, solid-state light detection and ranging (LIDAR), and holographic display technologies require spatial light modulators (SLMs) with high resolution and viewing angle to satisfy increasing customer demands. Performance of currently available SLMs is limited by their large pixel sizes on the order of several micrometers. Here, we propose a concept of tunable dielectric metasurfaces modulated by liquid crystal, which can provide abrupt phase change, thus enabling pixel-size miniaturization. We present a metasurface-based transmissive SLM, configured to generate active beam steering with >35% efficiency and a large beam deflection angle of 11°. The high resolution and steering angle obtained provide opportunities to develop the next generation of LIDAR and display technologies.

scholarly journals A Review on the Development of Rotman Lens Antenna

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Shruti Vashist ◽  
M. K. Soni ◽  
P. K. Singhal
Keyword(s):  
High Performance ◽  
Beam Steering ◽  
Phase Error ◽  
Antenna System ◽  
Surveillance Systems ◽  
Electronic Warfare ◽  
Design Concepts ◽  
Low Profile ◽  
True Time ◽  
The One

Rotman lenses are the beguiling devices used by the beamforming networks (BFNs). These lenses are generally used in the radar surveillance systems to see targets in multiple directions due to its multibeam capability without physically moving the antenna system. Now a days these lenses are being integrated into many radars and electronic warfare systems around the world. The antenna should be capable of producing multiple beams which can be steered without changing the orientation of the antenna. Microwave lenses are the one who support low-phase error, wideband, and wide-angle scanning. They are the true time delay (TTD) devices producing frequency independent beam steering. The emerging printed lenses in recent years have facilitated the advancement of designing high performance but low-profile, light-weight, and small-size and networks (BFNs). This paper will review and analyze various design concepts used over the years to improve the scanning capability of the lens developed by various researchers.

Sign in / Sign up

Export Citation Format

Share Document