scholarly journals Utilization of Food and Agricultural Residues for a Flexible Biogas Production: Process Stability and Effects on Needed Biogas Storage Capacities

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2678 ◽  
Author(s):  
Ervin Saracevic ◽  
Susanne Frühauf ◽  
Angela Miltner ◽  
Kwankao Karnpakdee ◽  
Bernhard Munk ◽  
...  
Keyword(s):  
Power Generation ◽  
Ph Value ◽  
Continuous Fermentation ◽  
Biogas Production ◽  
Biogas Plant ◽  
Feeding Strategies ◽  
Peak Time ◽  
Process Stability ◽  
Stability Parameters ◽  
Ammonia Content

Biogas plants can contribute to future energy systems’ stability through flexible power generation. To provide power flexibly, a demand-oriented biogas supply is necessary, which may be ensured by applying flexible feeding strategies. In this study, the impacts of applying three different feeding strategies (1x, 3x and 9x feeding per day) on the biogas and methane production and process stability parameters were determined for a biogas plant with a focus on waste treatment. Two feedstocks that differed in (1) high fat and (2) higher carbohydrate content were investigated during semi-continuous fermentation tests. Measurements of the short chain fatty acids concentration, pH value, TVA/TIC ratio and total ammonium and ammonia content along with a molecular biology analysis were conducted to assess the effects on process stability. The results show that flexible biogas production can be obtained without negative impacts on the process performance and that production peaks in biogas and methane can be significantly shifted to another time by changing feeding intervals. Implementing the fermentation tests’ results into a biogas plant simulation model and an assessment of power generation scenarios focusing on peak-time power generation revealed a considerable reduction potential for the needed biogas storage capacity of up to 73.7%.

scholarly journals Integration of centralized biogas plant in cold-snowy region in Japan

2011 ◽  
Vol 27 (3) ◽  
pp. 405-414 ◽  
Author(s):  
K. Umetsu ◽  
C. Ying ◽  
S. Kikuchi ◽  
M. Iwasaki ◽  
Y. Takeuchi ◽  
...  
Keyword(s):  
Power Generation ◽  
Biogas Production ◽  
Average Power ◽  
Local Economy ◽  
Biogas Plant ◽  
Operational Performance ◽  
Power Company ◽  
Plant Utilization ◽  
Centralized Biogas Plant ◽  
Economic Balance

A centralized biogas plant was built in Shikaoi town, Hokkaido, Japan to treat manure from 1320 cattle heads. The biogas plant was designed to operate at a feeding amount of 85.8 t/day, a hydraulic retention time (HRT) of 37 days and at a digester temperature of 38 ?C. In this study, the operational performance of biogas plant, utilization of digested slurry and economic balance were investigated. Since the working conditions of the plant became stable, the biogas production was 2,687 m3/day, 92% of produced biogas was consumed in power generation. Average methane concentration in produced biogas was 57.7%. The hydrogen sulfide (H2S) concentration was decreased to below 140 ppm as a result of bio-desulfurization and dry-desulfurization. The average power generation was 3,737 kwh/day and from that 54% of produced biogas was consumed in the facility operation, while 46% was sold to Power Company. About 20,260 t of digested slurry were applied onto 602 ha grassland and agricultural fields. From the results of the operational performance of the plant and the economic balance evidence, it is evident that the centralized biogas plant has a positive effect on the local economy.

scholarly journals State estimation for anaerobic digesters using the ADM1

2012 ◽  
Vol 66 (5) ◽  
pp. 1088-1095 ◽  
Author(s):  
D. Gaida ◽  
C. Wolf ◽  
C. Meyer ◽  
A. Stuhlsatz ◽  
J. Lippel ◽  
...  
Keyword(s):  
Anaerobic Digestion ◽  
State Estimation ◽  
Ph Value ◽  
Biogas Production ◽  
Synthetic Data ◽  
Full Scale ◽  
Biogas Plant ◽  
Actual State ◽  
Wide Range ◽  
Biogas Plants

The optimization of full-scale biogas plant operation is of great importance to make biomass a competitive source of renewable energy. The implementation of innovative control and optimization algorithms, such as Nonlinear Model Predictive Control, requires an online estimation of operating states of biogas plants. This state estimation allows for optimal control and operating decisions according to the actual state of a plant. In this paper such a state estimator is developed using a calibrated simulation model of a full-scale biogas plant, which is based on the Anaerobic Digestion Model No.1. The use of advanced pattern recognition methods shows that model states can be predicted from basic online measurements such as biogas production, CH4 and CO2 content in the biogas, pH value and substrate feed volume of known substrates. The machine learning methods used are trained and evaluated using synthetic data created with the biogas plant model simulating over a wide range of possible plant operating regions. Results show that the operating state vector of the modelled anaerobic digestion process can be predicted with an overall accuracy of about 90%. This facilitates the application of state-based optimization and control algorithms on full-scale biogas plants and therefore fosters the production of eco-friendly energy from biomass.

BIOGAS PRODUCTION IN THE CONCENTRATED DISTILLERY WASTEWATER TREATMENT

2018 ◽  
pp. 51-59 ◽  
Author(s):  
N. Golub ◽  
M. Potapova ◽  
M. Shinkarchuk ◽  
O. Kozlovets
Keyword(s):  
Wastewater Treatment ◽  
Dry Matter ◽  
Ph Value ◽  
Biogas Production ◽  
Anaerobic Sludge ◽  
Methane Formation ◽  
Maximum Output ◽  
Processing Technologies ◽  
Spent Wash ◽  
Distillery Spent Wash

The paper deals with the waste disposal problem of the alcohol industry caused by the widespread use of alcohol as biofuels. In the technology for the production of alcohol from cereal crops, a distillery spent wash (DSW) is formed (per 1 dm3 of alcohol – 10–20 dm3 DSW), which refers to highly concentrated wastewater, the COD value reaches 40 g O2/dm3. Since the existing physical and chemical methods of its processing are not cost-effective, the researchers develop the processing technologies for its utilization, for example, an anaerobic digestion. Apart from the purification of highly concentrated wastewater, the advantage of this method is the production of biogas and highquality fertilizer. The problems of biotechnology for biogas production from the distillery spent wash are its high acidity–pH 3.7–5.0 (the optimum pH value for the methanogenesis process is 6.8–7.4) and low nitrogen content, the lack of which inhibits the development of the association of microorganisms. In order to solve these problems, additional raw materials of various origins (chemical compounds, spent anaerobic sludge, waste from livestock farms, etc.) are used. The purpose of this work is to determine the appropriate ratio of the fermentable mixture components: cosubstrate, distillery spent wash and wastewater of the plant for co-fermentation to produce an energy carrier (biogas) and effective wastewater treatment of the distillery. In order to ensure the optimal pH for methanogenesis, poultry manure has been used as a co-substrate. The co-fermentation process of DSW with manure has been carried out at dry matter ratios of 1:1, 1:3, 1:5, 1:7 respectively. It is found that when the concentration of manure in the mixture is insufficient (DSW/manure – 1:1, 1:3), the pH value decreases during fermentation which negatively affects methane formation; when the concentration of manure in the mixture is increased (DSW/manure – 1:5, 1:7), the process is characterized by a high yield of biogas and methane content. The maximum output of biogas with a methane concentration of 70 ± 2% is observed at the ratio of components on a dry matter “wastewater: DSW: manure” – 0,2:1:7 respectively. The COD reduction reaches a 70% when using co-fermentation with the combination of components “wastewater: DSW: manure” (0,3:1:5) respectively.

Biogas Production Using Anaerobic Digestion of Industrial Waste

2016 ◽  
Vol 832 ◽  
pp. 55-62
Author(s):  
Ján Gaduš ◽  
Tomáš Giertl ◽  
Viera Kažimírová
Keyword(s):  
Anaerobic Digestion ◽  
Industrial Waste ◽  
Large Scale ◽  
Biogas Production ◽  
Biogas Plant ◽  
Parallel Operation ◽  
Paper Production ◽  
Biochemical Conversion ◽  
Mixed Biomass ◽  
Economic Balance

In the paper experiments and theory of biogas production using industrial waste from paper production as a co-substrate are described. The main aim of the experiments was to evaluate the sensitivity and applicability of the biochemical conversion using the anaerobic digestion of the mixed biomass in the pilot fermentor (5 m3), where the mesophillic temperature was maintained. It was in parallel operation with a large scale fermentor (100 m3). The research was carried out at the biogas plant in Kolíňany, which is a demonstration facility of the Slovak University of Agriculture in Nitra. The experiments proved that the waste arising from the paper production can be used in case of its appropriate dosing as an input substrate for biogas production, and thus it can improve the economic balance of the biogas plant.

scholarly journals Innovations in anaerobic digestion: a model-based study

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Karol Postawa ◽  
Jerzy Szczygieł ◽  
Marek Kułażyński
Keyword(s):  
Mathematical Model ◽  
Anaerobic Digestion ◽  
Production Efficiency ◽  
Biogas Production ◽  
Biogas Plant ◽  
Methane Content ◽  
Pig Manure ◽  
Pig Slurry ◽  
Production Chain ◽  
The Impact

Abstract Background Increasing the efficiency of the biogas production process is possible by modifying the technological installations of the biogas plant. In this study, specific solutions based on a mathematical model that lead to favorable results were proposed. Three configurations were considered: classical anaerobic digestion (AD) and its two modifications, two-phase AD (TPAD) and autogenerative high-pressure digestion (AHPD). The model has been validated based on measurements from a biogas plant located in Poland. Afterward, the TPAD and AHPD concepts were numerically tested for the same volume and feeding conditions. Results The TPAD system increased the overall biogas production from 9.06 to 9.59%, depending on the feedstock composition, while the content of methane was slightly lower in the whole production chain. On the other hand, the AHPD provided the best purity of the produced fuel, in which a methane content value of 82.13% was reached. At the same time, the overpressure leads to a decrease of around 7.5% in the volumetric production efficiency. The study indicated that the dilution of maize silage with pig manure, instead of water, can have significant benefits in the selected configurations. The content of pig slurry strengthens the impact of the selected process modifications—in the first case, by increasing the production efficiency, and in the second, by improving the methane content in the biogas. Conclusions The proposed mathematical model of the AD process proved to be a valuable tool for the description and design of biogas plant. The analysis shows that the overall impact of the presented process modifications is mutually opposite. The feedstock composition has a moderate and unsteady impact on the production profile, in the tested modifications. The dilution with pig manure, instead of water, leads to a slightly better efficiency in the classical configuration. For the TPAD process, the trend is very similar, but the AHPD biogas plant indicates a reverse tendency. Overall, the recommendation from this article is to use the AHPD concept if the composition of the biogas is the most important. In the case in which the performance is the most important factor, it is favorable to use the TPAD configuration.

scholarly journals Empirical Validation of a Biogas Plant Simulation Model and Analysis of Biogas Upgrading Potentials

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2424
Author(s):  
Jan Martin Zepter ◽  
Jan Engelhardt ◽  
Tatiana Gabderakhmanova ◽  
Mattia Marinelli
Keyword(s):  
Simulation Model ◽  
Biogas Production ◽  
Biogas Plant ◽  
Raw Material ◽  
Biogas Upgrading ◽  
Integrated Energy Systems ◽  
First Order Kinetics ◽  
Biogas Plants ◽  
Plant Simulation ◽  
Kinetics Of

Biogas plants may support the transformation towards renewable-based and integrated energy systems by providing dispatchable co-generation as well as opportunities for biogas upgrading or power-to-X conversion. In this paper, a simulation model that comprises the main dynamics of the internal processes of a biogas plant is developed. Based on first-order kinetics of the anaerobic digestion process, the biogas production of an input feeding schedule of raw material can be estimated. The output of the plant in terms of electrical and thermal energy is validated against empirical data from a 3-MW biogas plant on the Danish island of Bornholm. The results show that the model provides an accurate representation of the processes within a biogas plant. The paper further provides insights on the functioning of the biogas plant on Bornholm as well as discusses upgrading potentials of biogas to biomethane at the plant from an energy perspective.

scholarly journals Evaluation of Eco-Efficiency of Two Alternative Agricultural Biogas Plants

2018 ◽  
Vol 8 (11) ◽  
pp. 2083 ◽  
Author(s):  
Magdalena Muradin ◽  
Katarzyna Joachimiak-Lechman ◽  
Zenon Foltynowicz
Keyword(s):  
Waste Heat ◽  
Negative Impact ◽  
Biogas Production ◽  
Biogas Plant ◽  
Waste To Energy ◽  
Cost Calculation ◽  
Processing Plant ◽  
The European Union ◽  
Levelized Cost Of Electricity ◽  
Biogas Plants

Implementation of the circular economy is one of the priorities of the European Union, and energy efficiency is one of its pillars. This article discusses an effective use of agri-food industry waste for the purposes of waste-to-energy in biogas plants. Its basic objective is the comparative assessment of the eco-efficiency of biogas production depending on the type of feedstock used, its transport and possibility to use generated heat. The environmental impact of the analysed installations was assessed with the application of the Life Cycle Assessment (LCA) methodology. Cost calculation was performed using the Levelized Cost of Electricity (LCOE) method. The LCA analysis indicated that a biogas plant with a lower level of waste heat use where substrates were delivered by wheeled transport has a negative impact on the environment. The structure of distributed energy production cost indicates a substantial share of feedstock supply costs in the total value of the LCOE ratio. Thus, the factor affecting the achievement of high eco-efficiency is the location of a biogas plant in the vicinity of an agri-food processing plant, from which the basic feedstock for biogas production is supplied with the transmission pipeline, whereas heat is transferred for the needs of production processes in a processing plant or farm.

scholarly journals Biogas Production from Combined Irish Potato and Poultry Wastes: Optimization and Kinetic Studies

2018 ◽  
Vol 7 (3.36) ◽  
pp. 170
Author(s):  
Umar M. Ibrahim ◽  
Saeed I. Ahmed ◽  
Babagana Gutti ◽  
Idris M. Muhammad ◽  
Usman D. Hamza ◽  
...  
Keyword(s):  
Anaerobic Digestion ◽  
Kinetic Parameters ◽  
Ph Value ◽  
Biogas Production ◽  
Irish Potato ◽  
Coefficient Of Determination ◽  
Optimum Conditions ◽  
Biogas Yield ◽  
Potato Waste ◽  
Initial Ph

The combination of Irish potato waste (IPW) and poultry waste (PW) can form a synergy resulting into an effective substrate for a better biogas production due to some materials they contain. In this work, optimization and kinetic study of biogas production from anaerobic digestion of IPW and PW was investigated. Response surface methodology (RSM) was applied to optimize conditions such as initial pH, solids concentrations and waste ratios. The anaerobic digestion of the two wastes was carried out in the mesophilic condition and Box-Behnken design (BBD) was used to develop and analyze a predictive model which describes the biogas yield. The results revealed that there is a good fit between the experimental and the predicted biogas yield as revealed by the coefficient of determination (R2) value of 97.93%. Optimization using quadratic RSM predicts biogas yield of 19.75% at the optimal conditions of initial pH value 7.28, solids concentration (w/v) 9.85% and waste ratio (IPW:PW) 45:55%. The reaction was observed to have followed a first order kinetics having R2 and relative squared error (RSE) values of 90.61 and 9.63% respectively. Kinetic parameters, such as rate constant and half-life of the biogas yield were evaluated at optimum conditions to be 0.0392 day-1 and 17.68 days respectively. The optimum conditions and kinetic parameters generated from this research can be used to design real bio-digesters, monitor substrate concentrations, simulate biochemical processes and predict performance of bio-digesters using IPW and PW as substrate.  

scholarly journals Economic and Technical Evaluation of Flexible Power Generation Scenarios for a Biogas Plant

2020 ◽  
Vol 8 (2) ◽  
pp. 328-343 ◽  
Author(s):  
Ervin Saracevic ◽  
Franz Theuretzbacher ◽  
David Woess ◽  
Anton Friedl ◽  
Angela Miltner
Keyword(s):  
Power Generation ◽  
Biogas Plant ◽  
Technical Evaluation

scholarly journals A review of anaerobic landfill bioreactor using leachate recirculation to increase methane gas recovery

2021 ◽  
Vol 894 (1) ◽  
pp. 012013
Author(s):  
M A Budihardjo ◽  
B S Ramadan ◽  
E Yohana ◽  
Syafrudin ◽  
F Rahmawati ◽  
...  
Keyword(s):  
Alternative Energy ◽  
Ph Value ◽  
Biogas Production ◽  
Future Research ◽  
Leachate Recirculation ◽  
Methane Gas ◽  
Gas Recovery ◽  
Development Plans ◽  
Waste Degradation ◽  
The Relationship

Abstract Municipal Solid Waste (MSW) treatment with anaerobic landfill bioreactor utilizes landfill as a place of biodegradation and produces methane gas which can be used as renewable alternative energy source. Anaerobic landfill bioreactor technology is a landfill development method that can increase waste degradation and increase biogas production. The increase of biogas and the removal of pollutants from leachate needs to pay attention to the factors that influence the success of anaerobic landfill bioreactor, including pH value, temperature, water content, and COD concentration after recirculation, and methane production. The relationship between these factors was discussed in depth in this paper. The method used is a narrative review where metadata is obtained from Google Scholar and Web of Science. This study explains the development of an anaerobic landfill bioreactor and conducts a synthesis for future research development plans by leachate recirculation.

Sign in / Sign up

Export Citation Format

Share Document