scholarly journals Analysis of Input Voltage Switching Ripple in Three-Phase Four-Wire Split Capacitor PWM Inverters

Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5076 ◽  
Author(s):  
Manel Hammami ◽  
Riccardo Mandrioli ◽  
Aleksandr Viatkin ◽  
Mattia Ricco ◽  
Gabriele Grandi
Keyword(s):  
Numerical Simulations ◽  
Comprehensive Evaluation ◽  
Experimental Tests ◽  
Input Voltage ◽  
Switching Voltage ◽  
Two Phase ◽  
Voltage Ripple ◽  
Battery Chargers ◽  
Three Phase ◽  
Split Capacitor

Three-phase, four-wire split capacitor inverters are currently employed in many applications, such as photovoltaic systems, battery chargers for electric vehicles, active power filters, and, in general, in all grid-tied applications that deal with possible grid voltage and/or current unbalances. This paper provides a comprehensive evaluation of the capacitor-switching voltage ripple and dc-link switching voltage ripple for the three-phase, four-wire, split capacitor inverters. Specifically, analytical formulations of the peak-to-peak and rms values of the voltage ripples are originally pointed out in this paper and determined in the case of balanced three-phase and unbalanced (two-phase and single-phase) output (ac) currents. The obtained results can help in designing the considered inverter and sizing of the dc-link capacitors. Reference is made to the sinusoidal PWM modulation and sinusoidal three-phase output currents with an almost unity power factor, representing a grid-connected application. Extensive numerical simulations have been carried out to thoroughly verify all the analytical developments presented in this paper. Furthermore, some experimental tests, having balanced output currents on the ac side, have been accomplished, validating numerical simulations and analytical developments.

scholarly journals AC Current Ripple in Three-Phase Four-Leg PWM Converters with Neutral Line Inductor

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1430
Author(s):  
Aleksandr Viatkin ◽  
Riccardo Mandrioli ◽  
Manel Hammami ◽  
Mattia Ricco ◽  
Gabriele Grandi
Keyword(s):  
Numerical Simulations ◽  
Pulse Width Modulation ◽  
Neutral Line ◽  
Experimental Tests ◽  
Performance Comparison ◽  
Design Parameters ◽  
Switching Frequency ◽  
Three Phase ◽  
Ac Current ◽  
Current Ripple

This paper presents a comprehensive study of peak-to-peak and root-mean-square (RMS) values of AC current ripples with balanced and unbalanced fundamental currents in a generic case of three-phase four-leg converters with uncoupled AC interface inductors present in all three phases and in neutral. The AC current ripple characteristics were determined for both phase and neutral currents, considering the sinusoidal pulse-width modulation (SPWM) method. The derived expressions are simple, effective, and ready for accurate AC current ripple calculations in three- or four-leg converters. This is particularly handy in the converter design process, since there is no need for heavy numerical simulations to determine an optimal set of design parameters, such as switching frequency and line inductances, based on the grid code or load restrictions in terms of AC current ripple. Particular attention has been paid to the performance comparison between the conventional three-phase three-leg converter and its four-leg counterpart, with distinct line inductance values in the neutral wire. In addition to that, a design example was performed to demonstrate the power of the derived equations. Numerical simulations and extensive experimental tests were thoroughly verified the analytical developments.

scholarly journals Phase and Neutral Current Ripple Analysis in Three-Phase Four-Wire Split-Capacitor Grid Converter for EV Chargers

Electronics ◽  
2021 ◽  
Vol 10 (9) ◽  
pp. 1016
Author(s):  
Riccardo Mandrioli ◽  
Manel Hammami ◽  
Aleksandr Viatkin ◽  
Riccardo Barbone ◽  
Davide Pontara ◽  
...  
Keyword(s):  
Pulse Width ◽  
Pulse Width Modulation ◽  
Neutral Current ◽  
Experimental Tests ◽  
Single Carrier ◽  
Three Phase ◽  
Split Capacitor ◽  
Current Ripples ◽  
Sinusoidal Pulse Width Modulation ◽  
Current Ripple

The current switching ripple in a three-phase four-wire split-capacitor converter is analyzed in this paper for all the four ac output wires in relation to both balanced and unbalanced working conditions. Specifically, analytical formulations of the peak-to-peak and root mean square (RMS) current ripples are originally evaluated as a function of the modulation index, separately for the three phases and the neutral wire. Initially, the single-carrier sinusoidal pulse width modulation (PWM) technique is outlined, as it generally concerns a straightforward and effective modulation. With the aim of mitigating the current ripple in the neutral wire, the interleaved multiple-carrier PWM strategy is adopted, also avoiding any repercussion on the phase one. Numerical simulations and experimental tests were carried out to verify all the analytical developments.

scholarly journals Capacitors Voltage Switching Ripple in Three-Phase Three-Level Neutral Point Clamped Inverters with Self-Balancing Carrier-Based Modulation

Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3244 ◽  
Author(s):  
Manel Hammami ◽  
Gabriele Rizzoli ◽  
Riccardo Mandrioli ◽  
Gabriele Grandi
Keyword(s):  
Experimental Tests ◽  
Neutral Point ◽  
Grid Connection ◽  
Voltage Ripple ◽  
Three Phase ◽  
Capacitor Voltage ◽  
Sinusoidal Load ◽  
Almost All ◽  
Current Ripple ◽  
Voltage Switching

This paper provides a comprehensive analysis of the capacitors voltage switching ripple for three-phase three-level neutral point clamped (NPC) inverter topologies. The voltage ripple amplitudes of the two dc-link capacitors are theoretically estimated as a function of both amplitude and phase angle of output current and the inverter modulation index. In particular, peak-to-peak distribution and maximum amplitudes of the capacitor voltage switching ripple over the fundamental period are obtained. A comparison is made considering different carrier-based pulse-width modulations in the case of almost all sinusoidal load currents, representing either grid connection or passive load with a negligible current ripple. Based on the voltage switching ripple requirements of capacitors, a simple and effective original equation for a preliminary sizing of the capacitors has been proposed. Numerical simulations and experimental tests have been carried out in order to verify the analytical developments.

The generated power of multipole induction generator with secondary winding on the stator

2009 ◽  
Vol 25 (25) ◽  
pp. 31-34
Author(s):  
Guntis Diļevs ◽  
Edgars Jakobsons
Keyword(s):  
Rotation Speed ◽  
Induction Generator ◽  
Two Phase ◽  
Three Phase ◽  
Secondary Winding

The generated power of multipole induction generator with secondary winding on the statorThis paper posses the construction of induction generator, which has the ability to operate at a low rotation speed. This generator can be applied for directly driven turbine without using the gearbox. The generator is multi pole with all of the windings placed on the stator. Rotor is tooth-like and has no windings on it. Primary winding is three phase, secondary winding is two phase.

Inductor Saturation Compensation in Three-Phase Three-Wire Voltage-Source Converters via Inverse System Dynamics-I

2020 ◽  
Author(s):  
Ziya Özkan ◽  
Ahmet Masum Hava
Keyword(s):  
Dynamic Model ◽  
Dynamic Performance ◽  
Current Control ◽  
Inverse System ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Two Phase ◽  
Inverse Dynamic ◽  
Three Phase ◽  
Steady State Current

In three-phase three-wire (3P3W) voltage-source converter (VSC) systems, utilization of filter inductors with deep saturation characteristics is often advantageous due to the improved size, cost, and efficiency. However, with the use of conventional synchronous frame current control (CSCC) methods, the inductor saturation results in significant dynamic performance loss and poor steady-state current waveform quality. This paper proposes an inverse dynamic model based compensation (IDMBC) method to overcome these performance issues. Accordingly, a review of inductor saturation and core materials is performed, and the motivation on the use of saturable inductors is clarified. Then, two-phase exact modelling of the 3P3W VSC control system is obtained and the drawbacks of CSCC have been demonstrated analytically. Based on the exact modelling, the inverse system dynamic model of the nonlinear system is obtained and employed such that the nonlinear plant is converted to a fictitious linear inductor system for linear current regulators to perform satisfactorily.

Transport of organochlorine pesticides in soil columns enhanced by dissolved organic carbon

1997 ◽  
Vol 35 (7) ◽  
pp. 139-145 ◽  
Author(s):  
Jiann-Yuan Ding ◽  
Shian-Chee Wu
Keyword(s):  
Organic Carbon ◽  
Dissolved Organic Carbon ◽  
Organochlorine Pesticides ◽  
Transport Model ◽  
Phase Model ◽  
Soil Columns ◽  
Two Phase ◽  
Three Phase ◽  
Phase Transport ◽  
Remediation Of Soil

The objective of this study is to quantify the effects of humic acid solution infiltration on the transport of organochlorine pesticides (OCPs) in soil columns using a three-phase transport model. From experimental results, it is found that the dissolved organic carbon enhances the transport of OCPs in the soil columns. In the OCPs-only column, the concentration profiles of OCPs can be simulated well using a two-phase transport model with numerical method or analytical solution. In the OCPs-DOC column, the migrations of aldrin, DDT and its daughter compounds are faster than those in the OCPs-only column. The simulation with the three-phase model is more accurate than that with the two-phase model. In addition, significant decrease of the fluid pore velocities of the OCPs-DOC column was found. When DOC leachate is applied for remediation of soil or groundwater pollution, the decrease of mean pore velocities will be a crucial affecting factor.

A Novel Two-phase Soft Starter Used for Three-phase Asynchronous Motors

2020 ◽  
Vol 13 (8) ◽  
pp. 1175-1182
Author(s):  
Jingwen Chen ◽  
Hongshe Dang
Keyword(s):  
Pulse Generation ◽  
Power Module ◽  
Two Phase ◽  
Power Semiconductor ◽  
Starting Current ◽  
Semiconductor Switches ◽  
Soft Starter ◽  
Three Phase ◽  
And Control ◽  
Driving Circuit

Background: Traditional thyristor-based three-phase soft starters of induction motor often suffer from high starting current and heavy harmonics. Moreover, both the trigger pulse generation and driving circuit design are usually complicated. Methods: To address these issues, we propose a novel soft starter structure using fully controlled IGBTs in this paper. Compared to approaches of traditional design, this structure only uses twophase as the input, and each phase is controlled by a power module that is composed of one IGBT and four diodes. Results: Consequently, both driving circuit and control design are greatly simplified due to the requirement of fewer controlled power semiconductor switches, which leads to the reduction of the total cost. Conclusion: Both Matlab/Simulink simulation results and experimental results on a prototype demonstrate that the proposed soft starter can achieve better performances than traditional thyristorbased soft starters for Starting Current (RMS) and harmonics.

Variable Switching Frequency PWM for Three-Phase Four-Wire Split-Capacitor Inverter Performance Enhancement

2021 ◽  
pp. 1-1
Author(s):  
Riccardo Mandrioli ◽  
Aleksandr Viatkin ◽  
Manel Hammami ◽  
Mattia Ricco ◽  
Gabriele Grandi
Keyword(s):  
Performance Enhancement ◽  
Switching Frequency ◽  
Three Phase ◽  
Split Capacitor

scholarly journals Investigation of Pressure Oscillation and Cavitation Characteristics for Submerged Self-Resonating Waterjet

2021 ◽  
Vol 11 (15) ◽  
pp. 6972
Author(s):  
Lihua Cui ◽  
Fei Ma ◽  
Tengfei Cai
Keyword(s):  
Sudden Change ◽  
Three Dimensional ◽  
Pressure Oscillation ◽  
Experimental Tests ◽  
Low Pressure ◽  
The Self ◽  
Two Phase ◽  
Cavitation Phenomenon ◽  
Pressure Zone ◽  
Unsteady Characteristics

The cavitation phenomenon of the self-resonating waterjet for the modulation of erosion characteristics is investigated in this paper. A three-dimensional computational fluid dynamics (CFD) model was developed to analyze the unsteady characteristics of the self-resonating jet. The numerical model employs the mixture two-phase model, coupling the realizable turbulence model and Schnerr–Sauer cavitation model. Collected data from experimental tests were used to validate the model. Results of numerical simulations and experimental data frequency bands obtained by the Fast Fourier transform (FFT) method were in very good agreement. For better understanding the physical phenomena, the velocity, the pressure distributions, and the cavitation characteristics were investigated. The obtained results show that the sudden change of the flow velocity at the outlet of the nozzle leads to the forms of the low-pressure zone. When the pressure at the low-pressure zone is lower than the vapor pressure, the cavitation occurs. The flow field structure of the waterjet can be directly perceived through simulation, which can provide theoretical support for realizing the modulation of the erosion characteristics, optimizing nozzle structure.

Sign in / Sign up

Export Citation Format

Share Document