scholarly journals Biomethanation of Carbon Monoxide by Hyperthermophilic Artificial Archaeal Co-Cultures

Fermentation ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 276
Author(s):  
Aaron Zipperle ◽  
Barbara Reischl ◽  
Tilman Schmider ◽  
Michael Stadlbauer ◽  
Ivan Kushkevych ◽  
...  

Climate neutral and sustainable energy sources will play a key role in future energy production. Biomethanation by gas to gas conversion of flue gases is one option with regard to renewable energy production. Here, we performed the conversion of synthetic carbon monoxide (CO)-containing flue gases to methane (CH4) by artificial hyperthermophilic archaeal co-cultures, consisting of Thermococcus onnurineus and Methanocaldococcus jannaschii, Methanocaldococcus vulcanius, or Methanocaldococcus villosus. Experiments using both chemically defined and complex media were performed in closed batch setups. Up to 10 mol% CH4 was produced by converting pure CO or synthetic CO-containing industrial waste gases at a high rate using a co-culture of T. onnurineus and M. villosus. These findings are a proof of principle and advance the fields of Archaea Biotechnology, artificial microbial ecosystem design and engineering, industrial waste-gas recycling, and biomethanation.

2011 ◽  
Vol 77 (15) ◽  
pp. 5467-5475 ◽  
Author(s):  
Michael Köpke ◽  
Christophe Mihalcea ◽  
FungMin Liew ◽  
Joseph H. Tizard ◽  
Mohammed S. Ali ◽  
...  

ABSTRACT2,3-Butanediol (23BD) is a high-value chemical usually produced petrochemically but which can also be synthesized by some bacteria. To date, the best microbial 23BD production rates have been observed using pathogenic bacteria in fermentation systems that depend on sugars as the carbon and energy sources for product synthesis. Here we present evidence of 23BD production by three nonpathogenic acetogenicClostridiumspecies—Clostridium autoethanogenum,C. ljungdahlii, andC. ragsdalei—using carbon monoxide-containing industrial waste gases or syngas as the sole source of carbon and energy. Through an analysis of theC. ljungdahliigenome, the complete pathway from carbon monoxide to 23BD has been proposed. Homologues of the genes involved in this pathway were also confirmed for the other two species investigated. A gene expression study demonstrates a correlation between mRNA accumulation from 23BD biosynthetic genes and the onset of 23BD production, while a broader expression study of Wood-Ljungdahl pathway genes provides a transcription-level view of one of the oldest existing biochemical pathways.


Land ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 682
Author(s):  
Zita Szabó ◽  
Viola Prohászka ◽  
Ágnes Sallay

Nowadays, in the context of climate change, efficient energy management and increasing the share of renewable energy sources in the energy mix are helping to reduce greenhouse gases. In this research, we present the energy system and its management and the possibilities of its development through the example of an ecovillage. The basic goal of such a community is to be economically, socially, and ecologically sustainable, so the study of energy system of an ecovillage is especially justified. As the goal of this community is sustainability, potential technological and efficiency barriers to the use of renewable energy sources will also become visible. Our sample area is Visnyeszéplak ecovillage, where we examined the energy production and consumption habits and possibilities of the community with the help of interviews, literature, and map databases. By examining the spatial structure of the settlement, we examined the spatial structure of energy management. We formulated development proposals that can make the community’s energy management system more efficient.


Holzforschung ◽  
2020 ◽  
Vol 74 (11) ◽  
pp. 1071-1078
Author(s):  
Jie Chu ◽  
Anuj Kumar

AbstractThe implementation of circular economy in wood industries is an effective way for future sustainable development. The wood industries in China are not in the direction of circular economy approach due to less availability of assessment/calculation data of pollutants as per life cycle assessment (LCA) criteria. The present study focuses on the calculation of emission and pollutants from wood industries as per LCA; the emission and pollution data were collected from fiberboard Medium-density fiberboard (MDF), plywood and particleboard (PB) production. The comparative analysis of dust emissions, industrial waste gases and chemical oxygen demand (COD) were performed among three wood industries. The results revealed that the fiberboard industry was the highest emitter of dust, industrial waste gas and COD; and particleboard industry was the least emitter. Further, results indicated that pollutant index of wood industries were significantly changed between 2015 and 2017; the industrial waste water discharge increased five folds and the COD, dust and industrial gases increased two times. This study provides with the emission and pollutants data of wood industries as per LCA to promote the sustainable development for circular and low carbon economics.


Author(s):  
Wasu Suksuwan ◽  
◽  
Mohd Faizal Mohideen Batcha ◽  
Arkom Palamanit ◽  
Makatar Wae-hayee ◽  
...  

Combustion of agricultural residues and wastes for energy applications is still popular. However, combustion of biomass with different shapes leads to many side effects such as agglomeration, emission and incomplete combustion. The aim of this study was therefore to investigate the effects of biomass shapes on combustion characteristics in an updraft combustion chamber. The rubber wood chip, coconut shell, oil palm empty fruit bunch, corn straw, rubber wood sawdust, and mixed palm cake were used as fuel and they were categorized as 3 shapes namely, chip shape, fiber shape, and powder shape. The biomass sample was combusted in simple cylindrical shape combustion chamber. The diameter of combustion chamber was 20 cm and its height was 160 cm. The biomass sample (moisture content below 20%) with amount of 1 kg was used to perform the experiment. The ambient air that had velocity of 0.50, 0.75 and 1.00 m/s (corresponding to an equivalence ratio of 1-3.5) was supplied to combustion chamber. The temperature at different positions along combustion chamber height and the properties of flue gases (carbon monoxide) were then measured. The results showed that the biomass shape had effect on combustion characteristics. Combustion of fiber shape biomass led to low combustion temperature, while the carbon monoxide in flue gases was high. This indicates the improper combustion process. The chip shape biomass was well combusted at a higher air velocity and the flue gases had lowest carbon monoxide. The highest combustion temperature was obtained from combustion of powder shape biomass. However, it led to the problem of unburned biomass such in case of sawdust. This is because the sawdust powder was carried from combustion chamber before burning completely.


Author(s):  
Kau-Fui Vincent Wong ◽  
Guillermo Amador

As society continues advancing into the future, more energy is required to supply the increasing population and energy demands. Unfortunately, traditional forms of energy production through the burning of carbon-based fuels are dumping harmful pollutants into the environment, resulting in detrimental, and possibly irreversible, effects on our planet. The burning of coal and fossil fuels provides energy at the least monetary cost for countries like the US, but the price being paid through their negative impact of our atmosphere is difficult to quantify. A rapid shift to clean, alternative energy sources is critical in order to reduce the amount of greenhouse gas emissions. For alternative energy sources to replace traditional energy sources that produce greenhouse gases, they must be capable of providing energy at equal or greater rates and efficiencies, while still functioning at competitive prices. The main factors hindering the pursuit of alternative sources are their high initial costs and, for some, intermittency. The creation of electrical energy from natural sources like wind, water, and solar is very desirable since it produces no greenhouse gases and makes use of renewable sources—unlike fossil fuels. However, the planning and technology required to tap into these sources and transfer energy at the rate and consistency needed to supply our society comes at a higher price than traditional methods. These high costs are a result of the large-scale implementation of the state-of-the-art technologies behind the devices required for energy cultivation and delivery from these unorthodox sources. On the other hand, as fossil fuel sources become scarcer, the rising fuel costs drive overall costs up and make traditional methods less cost effective. The growing scarcity of fossil fuels and resulting pollutants stimulate the necessity to transition away from traditional energy production methods. Currently, the most common alternative energy technologies are solar photovoltaics (PVs), concentrated solar power (CSP), wind, hydroelectric, geothermal, tidal, wave, and nuclear. Because of government intervention in countries like the US and the absence of the need to restructure the electricity transmission system (due to the similarity in geographical requirements and consistency in power outputs for nuclear and traditional plants), nuclear energy is the most cost competitive energy technology that does not produce greenhouse gases. Through the proper use of nuclear fission electricity at high efficiencies could be produced without polluting our atmosphere. However, the initial capital required to erect nuclear plants dictates a higher cost over traditional methods. Therefore, the government is providing help with the high initial costs through loan guarantees, in order to stimulate the growth of low-emission energy production. This paper analyzes the proposal for the use of nuclear power as an intermediate step before an eventual transition to greater dependence on energy from wind, water, and solar (WWS) sources. Complete dependence on WWS cannot be achieved in the near future, within 20 years, because of the unavoidable variability of these sources and the required overhaul of the electricity transmission system. Therefore, we look to nuclear power in the time being to help provide predictable power as a means to reduce carbon emissions, while the other technologies are refined and gradually implemented in order to meet energy demand on a consistent basis.


2018 ◽  
Vol 16 (2) ◽  
pp. 158-165
Author(s):  
Paulo Brito

The sustainable energy will play a key role in the future of the planet, not only because in 20 years Biomass is expected to deliver around 30% of total energy consumption, but also because BioEnergy, produced mainly through combustion and gasification of agro-industrial waste, woody materials and forest crops, is expected to be fundamental for sustainable energy production. Problems related to the emissions of greenhouse gases, lack of fossil natural resources and the increasing price of fuels have progressively encouraged research and adoption of new technological strategies for energy production from renewable sources and application of waste-to-energy (WTE) concepts. Syngas obtained from gasification of biomass and industrial wastes constitutes an interesting resource for energy generation because it has lower impacts for the environment compared to traditional technologies and allows for the valorisation of waste residues as feedstock. This work presents the scope, potential and technologies related to the use of biomass resources with a focus on thermal gasification of wastes.


2021 ◽  
Vol 2021 (6) ◽  
pp. 5312-5316
Author(s):  
MIROSLAV RIMAR ◽  
◽  
MARCEL FEDA ◽  
ANDRII KULIKOV ◽  
MILAN ABRAHAM ◽  
...  

The purpose of currently contribution is to analyse and compare effectivity of cogeneration unit in each summer and winter season. The main idea of combined heat and energy production is to reduce usage of primary fuels and with that connected reduction of pollutions due to the integration of renewable energy sources and with regard to the natural environment. Presented contribution is dedicated on issue on the operation of a cogeneration unit integrated in central heating system.


2012 ◽  
pp. 73-77
Author(s):  
Orsolya Nagy

Due to the exhaustion of the fossile fuel reserves of the Earth, the increase of fossile fuel prices and the difficulties concerning stable fuel supply, the increase of electricity production from renewable energy sources has a special strategic importance. In this study, I am going to evaluate the circumstances of the production and use of renewable energy sources in Hungary and in the European Union. I present the Hungarian economic, energy policy-related and social circumstances which make it necessary to support renewable energy production. I am going to give an overview on the related EU strategies concerning the sector and the Hungarian development plan in this field. I pay particular attention to the examination of development opportunities and the R&D activities going on in this area in Hungary, as well as the efficiency of the means used to improve renewable energy use.


2014 ◽  
pp. 13-17
Author(s):  
Zoltán Balla

The renewable energy sources could be used in energy production, while no or only very slightly emit harmful substances to the environment. The solar, wind, hydropower, biomass and heat rational utilization of land contributes to greenhouse gas emissions.Renewable energy sources also reduces the dependence on fossil fuels, thus contributing to increase security of supply. The creation of local jobs to strengthen the area's population retaining ability.


2019 ◽  
Vol 9 (9) ◽  
pp. 1844 ◽  
Author(s):  
Jesús Ferrero Bermejo ◽  
Juan F. Gómez Fernández ◽  
Fernando Olivencia Polo ◽  
Adolfo Crespo Márquez

The generation of energy from renewable sources is subjected to very dynamic changes in environmental parameters and asset operating conditions. This is a very relevant issue to be considered when developing reliability studies, modeling asset degradation and projecting renewable energy production. To that end, Artificial Neural Network (ANN) models have proven to be a very interesting tool, and there are many relevant and interesting contributions using ANN models, with different purposes, but somehow related to real-time estimation of asset reliability and energy generation. This document provides a precise review of the literature related to the use of ANN when predicting behaviors in energy production for the referred renewable energy sources. Special attention is paid to describe the scope of the different case studies, the specific approaches that were used over time, and the main variables that were considered. Among all contributions, this paper highlights those incorporating intelligence to anticipate reliability problems and to develop ad-hoc advanced maintenance policies. The purpose is to offer the readers an overall picture per energy source, estimating the significance that this tool has achieved over the last years, and identifying the potential of these techniques for future dependability analysis.


Sign in / Sign up

Export Citation Format

Share Document