scholarly journals The Effect of Foliar Application of Magnetic Water and Nano-Fertilizers on Phytochemical and Yield Characteristics of Fennel

Horticulturae ◽  
2021 ◽  
Vol 7 (11) ◽  
pp. 475
Author(s):  
Shahin Faridvand ◽  
Reza Amirnia ◽  
Mehdi Tajbakhsh ◽  
Hesham Ali El Enshasy ◽  
R. Z. Sayyed
Keyword(s):  
Foliar Application ◽  
Block Design ◽  
Dry Weight ◽  
Chicken Manure ◽  
First Year ◽  
Fertilizer Treatment ◽  
Biological Yield ◽  
Research And Education ◽  
West Azerbaijan ◽  
Magnetic Water

Environmental factors, especially nutrients, can influence the production of medicinal plants. Thus, the present study assessed the response of some morphological and physiological characteristics of fennel ecotypes to the foliar application (magnetic water, organic and chemical fertilizers). The study was a factorial experiment based on the randomized complete block design, with three replications and 25 treatments at the research farm of the Agricultural and Natural Resources Research and Education Center of West Azerbaijan province, Iran, in the spring and summer of two consecutive years, 2014–2015 and 2015–2016. The first factor was assigned to fennel landraces (Gaziantep, Hamedan, Urmia, Yazd, and Shiraz) and the second factor to the foliar application (nitrogen nano-fertilizer, magnetic water, urea, chicken manure, and the control). Results showed that interaction of fertilizer treatment and landrace increased fresh and dry weight, biological yield, and seed yield significantly. In the first year, the highest fresh weight (166 g) and dry weight (35.5 g) were observed in the Gaziantep landrace fertilized with chicken manure. The highest anethole and fenchone contents (81.75% and 7.92%, respectively) were observed in the landraces treated with chicken manure. Based on the percentages, the Urmia landrace had the highest anethole percentage (83.2%), and the Shiraz landrace had the lowest one (77.5%). The highest fenchone contents (9.61%) and the lowest (2.18%) were observed in the Yazd and Urmia landraces. Due to the positive effect of application of chicken manure on improving the studied traits of fennel, it is recommended to include chicken manure inputs to enhance the efficiency of crops, reduce environmental pollution, and move toward sustainable agriculture.

Application of Potassium Fertilizer and Chicken Coop Fertilizer Against Growth and Production of Shallots (Allium ascalanicum L.)

Nabatia ◽  
2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Andy Pradana ◽  
Al Machfudz WDP
Keyword(s):  
Growth Phase ◽  
Vegetative Growth ◽  
Growth Parameters ◽  
Block Design ◽  
Dry Weight ◽  
Chicken Manure ◽  
Fertilizer Treatment ◽  
Potassium Fertilizer ◽  
Wet Weight ◽  
Number Of Leaves

This study aims to determine the application of potassium fertilizer and chicken manure to the growth and production of shallots (Allium ascalanicum L.). The study used a randomized block design with 2 factors repeated 3 times. Factor 1: Potassium Fertilizer 40,60,80 kg/ha. Factor 2: Chicken Manure 5,10,15 tons/ha. The results showed that the application of potassium fertilizer and chicken manure did not interact with either the growth phase or the production phase of the plant on all observation variables, while the potassium fertilizer treatment showed significantly different results only on the plant vegetative growth parameters, namely the number of leaves at the age of 7 days after planting, namely ( 8,111 strands), while the vegetative phase had no significant effect on the number of tubers per clump, wet weight of tubers per clump, wet weight of tubers per plot, dry weight of sun-dried tubers per clump, and dry weight of sun-dried tubers per plot. While the treatment of chicken manure had a significant effect on the vegetative growth phase of plants, namely the length of plants at 28 DAP (30.278 cm) and 35 DAP (32.704 cm), on the number of leaves at 7 DAP (8,000 strands). While the generative phase (60 DAP) significantly affected the number of tubers per clump, namely (5,889 grams), wet weight of tubers per clump (38,333 grams), wet weight of tubers per plot (319,000 grams), dry weight of sun-dried tubers per clump. namely (23.074 grams), and the dry weight of sun-dried tubers per plot (191.889 grams).

Efficacy of Magnetic Water and Methanol on Agronomic Traits of Soybean (Glycine max L.)

2021 ◽  
Author(s):  
A. Fatehi ◽  
B. Pasari ◽  
A. Rokhzadi
Keyword(s):  
Seed Yield ◽  
Seed Protein ◽  
Agronomic Traits ◽  
Foliar Application ◽  
Block Design ◽  
Water Control ◽  
Yield Attributes ◽  
Net Return ◽  
Biological Yield ◽  
Magnetic Water

Background: The major part of the edible oil used in Iran is supplied through imports. It is important to increase the yield of oilseed crops, especially soybeans, in non-chemical and environmentally friendly ways, along with its easy availability and low cost. The use of magnetic water as a new method, increases the yield of plants by improving solubility and access the nutrients. On the other hand, in recent years, methanol spraying as a source of carbon dioxide, which increases the concentration of this gas around the plant, enhancing the photosynthesis and plant yield. This study was conducted to study the efficacy of different intensities of magnetic water and various concentrations of methanol foliar application on agronomic traits of soybean. Methods: This experiment was carried out as split plot in a randomized complete block design with 3 replications during two consecutive years 2016-17. The main plot was irrigated with magnetic water in 4 intensity (0: control, 4, 8, 12mTesla) and a subplot was methanol spraying in 4 volumetric percentage (distilled water: control, 10, 20 and 30% v/v). Result: Photosynthetic pigments viz. (Chlorophyll a, b, carotenoid), yield attributes, seed yield, biological yield, seed protein and soybean economics were significantly affected by the magnetic water and methanol spraying. Seed yield and net return, as the most important traits increased by magnetic irrigated with 8 and 12mTesla intensities, compared to control, by 70.05-72.19% and 122.37-126.05%, respectively. Furthermore the maximum biological, stover yields and protein obtained by 8mTesla magnetic irrigation, compared to control, it showed 59.54, 54.9 and 10.07% superiority, respectively. Also, methanol foliar application at 20% concentration increased seed yield, biological yield, seed protein and net return by 19.01, 13.73, 5.24 and 26.43%, respectively.

scholarly journals Performance of concentrated cropmax on growth and yield of mungbean

2018 ◽  
Vol 29 (3) ◽  
pp. 239-247
Author(s):  
LA Shimu ◽  
MM Hasan ◽  
ABMMM Khan ◽  
MK Hossain ◽  
MHK Howlader
Keyword(s):  
Foliar Application ◽  
Block Design ◽  
Dry Weight ◽  
Research Field ◽  
Growth And Yield ◽  
Shoot Dry Weight ◽  
Randomized Block Design ◽  
Biological Yield ◽  
Pod Length ◽  
Plant Length

The present study was conducted at the research field of Patuakhali Science and Technology University (PSTU), Patuakhali during the period from December 2013 to March 2014 to study on the effect of a concentrated fertilizer (Cropmax) on the growth and yield the Mung bean. It also observed the comparative growth and yield performance of foliar application Cropmax ( 0, 2.0, 3.0 and 5.0 ml L–1) . Data were collected on plant height, leaf per plant, branches per plant, length of root, leaf area, dry weight of shoot, dry weight of root, TDM, AGR, CGR and RGR, number of pod per plant, pod length, number of seed per pod, thousand seed weight, grain yield (t ha–1), straw yield (t ha–1), biological yield (t ha–1) and harvest index (%) etc.The experiment was laid out in a completely randomized block design (RCBD) with three replications. The collected data were analyzed statistically and means were adjudged by DMRT at 5% level of probability. The treatments Cropmax @ 3.0 ml L–1 as foliar application gave the highest performance in respect of all growth and yield parameters. Progressive Agriculture 29 (3): 239-247, 2018

Effect of Urea and Nano-Nitrogen Fertigation and Foliar Application of Nano-Boron and Molybdenum on some Growth and Yield Parameters of Potato

2020 ◽  
Vol 10 (1) ◽  
pp. 253-263
Author(s):  
Hayyawi W.A. Al-juthery ◽  
Estabraq Hilal Obaid Al-Maamouri
Keyword(s):  
Foliar Application ◽  
Growth Traits ◽  
Solanum Tuberosum L ◽  
Block Design ◽  
Growth And Yield ◽  
Control Treatment ◽  
Acid Yield ◽  
Biological Yield ◽  
Starch Yield ◽  
Private Farm

Investigating the effect of urea and nano-nitrogen fertigation and foliar application of nano B and Mo on growth and yield of potato Solanum tuberosum L. [Rivera-A]. The study was conducted in a private farm located in the Al-Taleah area - Babylon governorate. The experiment consisted of (12) treatments consisting of separated fertigation of nano nitrogen (25% N) and urea (46% N), single treatments of leaf spraying of nano Mo (5%), Nano B (9%), nano-binary combinations (Mo+B) and (U+ Nano Mo), (U+Nano B), Nano (N+Mo), Nano (N+B), and tricombination treatments of (U+Mo+B), Nano (N+Mo+B) additional to the control treatment. Randomize Complete Block Design (RCBD) and one way simple experiment with three replicates. Fertilizers were applied at levels of 40 liters h-1 of Nano-N fertilizer (25% N) and 300 kg h-1 urea fertilizer (46% N). They were sprayed early in the morning after (40) days after planting four times. Two weeks is the period between an application and another according to the recommendation of (1) kg  h-1 nano-fertilizer of (B) and (500) g h-1 of  Mo. Fertilizers were injected and sprayed at (10, 20, 30 and 40)% of the total amount of the fertilizer were applied as the first, second, third and fourth applications, respectively. Some growth traits were tested including the chlorophyll content in the leaves, the total dry vegetative yild, the soft tubers yield, and the biological yield, proteins and ascorbic acid yield compared to the control (spray water only). The results of the Duncan test showed a significant increase in most of the studied traits of nano-tricombination (N+Mo+B) in the fresh tubers yield,  dry vegetative yield  , the biological yield, starch yield ,the total protein and ascorbic yield (37.53, 1.799, 8.138,4.152 , 481.3and 653.8 meg ha-1) respectively .compare to control (21.58 , 0.890, 4.463  ,2.323 , 366.1 and 215.5 meg ha-1) respectively.

THE EFFECT OF SALINITY OF IRRIGATION WATER AND SPRAYING BY HUMIC ACID IN SOME OF MORPHOLOGICAL, PHYSIOLOGICAL PROPERTIES, GROWTH AND YIELD OF WHEAT (Triticum aestivum L.)

2020 ◽  
pp. 1-12
Author(s):  
E. K. Al-Fahdawe ◽  
A. A. Al-Sumaidaie ◽  
Y. K. Al-Hadithy
Keyword(s):  
Humic Acid ◽  
Plant Height ◽  
Irrigation Water ◽  
Saline Water ◽  
Block Design ◽  
Nitrogen Concentration ◽  
Dry Weight ◽  
Growth And Yield ◽  
Biological Yield ◽  
Phosphorus And Potassium

A pots experiment was conducted at the Department of Biology/College of Education for Girls/University of Anbar during Autumn season of 2018-2019 to study the effect of the salinity irrigation water and spray by humic acid in some of morphological, physiological, growth and yield traits of wheat cv. IPa. The experiment was randomized complete block design (RCBD) with three replications. The first factor was assigned for irrigation by saline water at four level (S0, S1, S2 and S3), while the second factor was the foliar spraying of humic acid in three level (0.0, 1.0 and 1.5 g l-1). The results showed that there was significant reduction in plant height, vegetative dry weight, biological yield and chlorophyll leaves content when the plants were irrigated by saline water approached to 41.09 cm, 0.747 g, 0.849 g plant-1 and 38.67 SPAD, respectively at salinity level of 8.3 ds m-1 compared with the plants which irrigated by fresh water. The total carbohydrates were significantly decreased at the treatment of 8.3 ds m-1 reached 18.71 mg g-1. Spray levels humic acid achieved a significant increase in plant height, dry weight of the vegetative part, biological yield and chlorophyll leaves content sprayed at 1.0 and 1.5 g l-1 compared to no sprayed. Nitrogen concentration was significantly increased, while both phosphorus and potassium were decreased in the vegetative parts of wheat as the salinity of irrigation water increased. However, the increase of humic acid levels led to significant increasing in nitrogen, phosphorus and potassium concentration.

scholarly journals Effect of Foliar Application of Growth Regulators on Vegetative and Physiological Growth Parameters in Ajowan (Trachyspermum ammi L. Sprague)

2020 ◽  
pp. 100-109
Author(s):  
Y. Rajasekhara Reddy ◽  
G. Ramanandam ◽  
P. Subbaramamma ◽  
A. V. D. Dorajeerao
Keyword(s):  
Leaf Area ◽  
Foliar Application ◽  
Growth Parameters ◽  
Block Design ◽  
Foliar Spray ◽  
Dry Weight ◽  
Area Index ◽  
Chlorophyll Contents ◽  
Trachyspermum Ammi ◽  
Number Of Leaves

A field experiment was carried out during rabi season of 2018-2019, at college farm, College of Horticulture, Dr. Y.S.R. Horticultural University, Venkataramannagudem, West Godavari District, Andhra Pradesh. The experiment was laidout in a Randomised Block Design with eleven treatments (viz., T1- NAA @ 50 ppm, T2-NAA @ 100 ppm, T3-GA3 @ 50 ppm,  T4-GA3 @ 100 ppm, T5-Thiourea @ 250 ppm, T6-Thiourea @ 500 ppm, T7-28-Homobrassinolide @ 0.1 ppm, T8-28-Homobrassinolide @ 0.2 ppm, T9-Triacontinol @ 2.5 ppm, T10-Triacontinol @ 5 ppm, T11-(Control) Water spray) and three replications. The treatments were imposed at 30 and 45 DAT in the form of foliar spray. Foliar application of GA3@ 100 ppm (T4) had recorded the maximum plant height (108.20 cm), leaf area (9.53 cm2) and leaf area index (0.74). Foliar application of thiourea @ 250 ppm (T5) had recorded the maximum values with respect to number of primary branches (15.03 plant-1), number of secondary branches (83.40 plant-1), plant spread (1793 cm2 plant-1), fresh weight (376.29 g plant-1), dry weight (103.54 g plant-1) and number of leaves plant-1((298.8). The same treatment (T5) had recorded the highest values with respect to crop growth rate (1.44 gm-2d-1), chlorophyll-a (1.40 mg g-1), chlorophyll-b (0.076 mg g-1) and total chlorophyll contents (1.48 mg g-1) in the leaves.

scholarly journals The Effect of Organic and Inorganic Fertilization on The Yield and Some Yield Components of Lentil (Lens culinaris Medic.) In Van Conditions

2021 ◽  
Vol 5 (4) ◽  
pp. 786-794
Author(s):  
Cihan YEŞILBAŞ ◽  
Yeşim TOGAY
Keyword(s):  
Seed Yield ◽  
Yield Components ◽  
Block Design ◽  
Chicken Manure ◽  
Seed Number ◽  
Protein Ratio ◽  
Branch Number ◽  
Plant Seed ◽  
Growing Seasons ◽  
Biological Yield

The study was conducted to determine effects of organic and inorganic fertilization on the yield and some yield components in lentil cultivars in 2014-15 growing seasons in Van. The experiment was laid out in a factorial randomised block design with three replications. The study was conducted to determine effects of different fertilizer sources (Control, DAP, Chicken manure and sheep manure) on the yield and some yield components in two lentil cultivars (Özbek and Kafkas). In the study were investigated the plant height, first pod height, branch number per plant, pod and seed number per plant, seed number per pod, biological yield, seed yield per unit, harvest index, 1000-seed weight and protein ratio in seed. The highest seed yield was obtained from chicken manure application of Özbek cultivar with 157.6 kg da-1.  

scholarly journals Pengaruh Pupuk Majemuk NPKS dan NPK terhadap Pertumbuhan dan Hasil Padi Sawah pada Inceptisol

2016 ◽  
Vol 34 (3) ◽  
pp. 175
Author(s):  
Wiwik Hartatik ◽  
Ladiyani Retno Widowati
Keyword(s):  
Nutrient Uptake ◽  
Block Design ◽  
Chemical Properties ◽  
Dry Weight ◽  
Grain Weight ◽  
Production Performance ◽  
Growth And Yield ◽  
Fertilizer Treatment ◽  
Optimum Rate ◽  
Compound Fertilizer

<p>Rate of NPK fertilization on rice using NPK compound fertilizer needs to consider soil nutrient status and plant nutrient requirement. The research was aimed to determine the optimum rate of compound fertilizer and the effect of enriched S nutrient of NPKS compound (15-15-15-5S) and NPK compound fertilizer (15-15-15) on the growth and yield of rice. The experiments were conducted at two sites in Galuga, Ciampea Bogor, West Java from April to September 2013, using randomised complete block design with 3 replications. Experiment at site I consisted of 9 treatments: six levels of fertilizers NPKS i.e. 0; 150; 300; 450; 600; and 750 kg/ha, standard fertilizer, NPK compound fertilizer equivalent to standard, and standard fertilizer plus S. Rate of urea, SP-36, and KCl for standard fertilizer treatment was respectively 250, 75, and 50 kg/ha. At site II the treatments consisted of 6 levels of NPK compound fertilizer i.e. 0; 150; 300; 450; 600; and 750 kg/ha and the standard fertilizer with rate of 250 kg/ha of urea, 50 kg/ha SP-36, and 75 kg/ha KCl. Plot size was 4 m x 5 m planted with Ciherang variety. Data collection included chemical properties of soil before and after the experiment, plant height, number of tillers, straw weight, and dry grain weight and the nutrient uptake. The effectiveness of fertilizer was calculated by RAE (Relative Agronomic Effectiveness). Results showed that fertilizer NPKS (15-15-15-5S) at 600 kg/ha effectively increased dry grain weight from 3.63 t/ha to 4.67 t/ha, but was not significantly different from a standard fertilizer treatment. It increased dry grain weight by 29% compared to control. NPK fertilizer (15-15-15) effectively promoted growth and dry grain weight equivalent to standard fertilizer at rate of 300-750 kgha. The optimum rate of NPK compound fertilizer (15-15-15) was 440 kg/ha as was shown with the production performance of 4.12 t/ha with RAE by 58%. NPKS compound fertilizer with rate of 750 kg/ha showed the highest uptake of N, P, and K nutrients and significantly increased the available P in the soil. Whereas NPK compound fertilizer with a rate of 600 kg/ha indicated the highest P nutrient uptake. Fertilizer enrichment with sulfur on NPKS fertilizer (15-15-15-5S) did not significant affect on grain dry weight.</p>

scholarly journals Application of Drip Irrigation on Various Planting Media and Cow Urine in the Main Media of Preliminary Oil Palm Nursery

2021 ◽  
Vol 883 (1) ◽  
pp. 012015
Author(s):  
C I Wahyudin ◽  
A S Mahulette ◽  
V L Tanasale ◽  
D A Marasabessy ◽  
N Goo ◽  
...  
Keyword(s):  
Plant Height ◽  
Oil Palm ◽  
Drip Irrigation ◽  
Block Design ◽  
Dry Weight ◽  
Weight Increase ◽  
Fertilizer Treatment ◽  
Media Composition ◽  
Cow Urine ◽  
Wet Weight

Abstract The objective of this study was to determine the effect of drip irrigation and biological organic fertilizer treatment on oil palm growth. This study used a randomized complete block design with 3 replications. This research consisted of three experiments, namely drip irrigation, planting media composition, and cow urine dose on the growth of oil palm seedlings. There are three levels of drip irrigation, namely 30 minutes, 60 minutes and 90 minutes. Experiments on the type of planting media composition consisted of two types, namely M1 (ultisol soil + husk charcoal + fern fertilizer) and M2 (ultisol soil + empty bunches + goat manure). The cow urine experiment consisted of three levels, namely 100 ml, 150 ml, 300 ml. The results showed that giving water for 30 minutes gave the best results on stem circumference, plant height increase, plant dry weight increase, plant wet weight increase in oil palm seedlings. M1 media (ultisol soil + husk charcoal + fern fertilizer) had a significant effect on the increase in plant height, wet weight and dry weight of oil palm seedlings. Treatment of 150 ml cow urine liquid fertilizer is sufficient for the needs of oil palm seedlings with a response that is not different from 200 ml of cow urine.

scholarly journals Study of Seed Soaking and Foliar Application of Ascorbic Acid, Citric Acid and Humic Acid on Growth, Yield and Active Components In Maize

2021 ◽  
Vol 910 (1) ◽  
pp. 012076
Author(s):  
J. J. Kadhim ◽  
J. H. Hamza
Keyword(s):  
Ascorbic Acid ◽  
Citric Acid ◽  
Humic Acid ◽  
Foliar Application ◽  
Block Design ◽  
Growth Yield ◽  
Active Components ◽  
Seed Soaking ◽  
Maize Seeds ◽  
Biological Yield

Abstract Foliar application and seed soaking has been used as a means of supplying supplemental doses of nutrients, plant hormones, stimulants, and organic components. the effects of these applications have included yield increases, and improved drought tolerance, and enhanced crop quality, so A field experiment was carried out during spring seasons in 2019 and 2020 for styding Seed soaking and Foliar Application of Ascorbic acid, Citric acid and Humic acid on Growth, Yield and Active Components IN Maize. Randomized complete block design in split plots arrangement was used with three replicates. Main-plots were for seeds soaking with ascorbic, citric (100 mg l-1) frequently and humic at (1 ml l-1). Sub-plots were for vegetative parts nutrition with same acids above. Results showed a significant superiority of seeds soaking in humic acid for traits of ears number per plant (1.3 and 1.6), rows number per ear (16.6 and 17.5), grains number per row (39.3 and 45.3), grains number per ear (644.3 and 793.5), weight of 300 grains (75.3 and 100.6 g), total grain yield ( 6.0 and 8.3 ton ha-1), shelling ratio (79.3 and 85.1%), biological yield (20.7 and 26.8 ton ha-1), harvesting index (30.4 and 31.2%), in both seasons respectively. Effect of vegetative parts nutrition or interaction between studied factors was non-significant on most traits studied. It can be concluded that soaking maize seeds in humic acid improves yield and yield components.

Sign in / Sign up

Export Citation Format

Share Document