scholarly journals Transnational Accessibility between Residential Areas Based on Multimodal Transport System

2021 ◽  
Vol 10 (3) ◽  
pp. 136
Author(s):  
Nan Xia ◽  
Liang Cheng ◽  
Manchun Li
Keyword(s):  
Travel Time ◽  
Transport System ◽  
Process Analysis ◽  
Weighted Average ◽  
Residential Areas ◽  
Whole Process ◽  
Average Travel Time ◽  
Multimodal Transport ◽  
Transnational Activities ◽  
Basic Evaluation

Due to the development of globalization, transnational activities are more frequent and evaluations of current accessibility are the basis for accessibility improvements. Accessibility evaluation indices generally contain two parts: travel time and travel probability. However, complex transnational processes involve the multimodal transport system, including air and land transport networks, which makes the calculation of these indices more difficult because large quantities of fundamental data, in addition to suitable models, are needed. In this study, residential areas were set as the basic evaluation unit for fine-scale and whole-process analysis. Then, multiple web-sourced platforms were introduced to acquire the travel time between each pair of residential areas. The temporal-range radiation model was applied to calculate transnational travel probability by considering spatial interactions of populations. Finally, the weighted-average travel time to South Asia and Southeast Asia (SA&SEA) countries was generated to represent the overall accessibility for each populated area in China. The results showed that China had better accessibility to SEA than SA, and countries with high accessibility were Thailand, Singapore, and Malaysia. In China, southwest, south, and southeast regions showed larger accessibility to SA&SEA. Improvements of accessibility were also indicated by conjoint analysis of airport nodes. The proposed framework can help to delineate the spatial patterns of transnational accessibility and guide the enhancements of accessibility.

scholarly journals THE ACCESSIBILITY OF EUROPEAN REGIONS AND AIRPORT NETWORK

2015 ◽  
Vol 6 (2) ◽  
pp. 87-109 ◽  
Author(s):  
Renato Redondi ◽  
Paolo Malighetti ◽  
Stefano Paleari
Keyword(s):  
Travel Time ◽  
High Speed ◽  
Waiting Times ◽  
Weighted Average ◽  
Air Transport ◽  
High Speed Train ◽  
Territorial Unit ◽  
Average Travel Time ◽  
Direct Flight ◽  
Total Travel Time

The objective of this work is to evaluate the accessibility of European municipalities by air transport. We focus on travels that typically require the use of air transport by computing the quickest paths between any pair of municipalities separated by more than 500 km. The total travel time includes three components: i) travel by car or High Speed Train to reach the origin airport, ii) travel by air from the origin airport to the destination airport, including waiting times when no direct flight is available and iii) travel by car or High Speed Train from the destination airport to the municipality of destination. For each territorial unit, we calculate the population-weighted average travel time to reach any other municipality in Europe.

scholarly journals Impacts of the Qinghai–Tibet Railway on Accessibility and Economic Linkage of the Third Pole

2018 ◽  
Vol 10 (11) ◽  
pp. 3982 ◽  
Author(s):  
Shicheng Li ◽  
Jian Gong ◽  
Qinghai Deng ◽  
Tianyu Zhou
Keyword(s):  
Sustainable Development ◽  
Travel Time ◽  
Eastern China ◽  
Weighted Average ◽  
Spatial Disparity ◽  
The Sustainable Development ◽  
Capital Cities ◽  
The Third ◽  
Average Travel Time ◽  
Economic Linkages

Constructing the Qinghai–Tibet Railway (QTR) was a landmark project and was beneficial to the sustainable development of the Third Pole. To understand the sustainable development of remote regions by the provision of railway, we studied the QTR’s impact on accessibilities and economic linkages for four cities in the Third Pole, Xining, Golmud, Nagqu, and Lhasa, and between these four cities and 29 capital cities in mid-eastern China. First, employing average shortest travel time (ASTT) and weighted average travel time (WATT) as indicators, we calculated the railway-based accessibilities for June 2006 and January 2013. Then, using a gravity model, railway-based economic linkages were determined. The results demonstrate that: (i) ASTT for Xining–Golmud decreased by 4.14 h from June 2006 to January 2013. Both ASTT and WATT indicated that the accessibilities of the four cities and between these four cities and 29 capital cities in mid-eastern China improved significantly, and the spatial disparity in accessibility for the four cities decreased, which increased the balance and sustainability of the transportation system; (ii) the average contribution rate of the QTR to improving economic linkages for six routes among the four cities was 25.29%, with the Xining–Nagqu and Nagqu–Lhasa linkages improving most significantly; (iii) the QTR strengthened economic linkages between the four cities and mid-eastern cities. Because of the QTR, the economic linkages between the four cities and 29 capital cities increased 27.58% on average. The spatial disparity in interurban economic linkages also decreased. Transporting products from Tibet should be promoted to strengthen the sustainability of economic growth.

scholarly journals Travel Time Reliability for Urban Networks: Modelling and Empirics

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Fangfang Zheng ◽  
Xiaobo Liu ◽  
Henk van Zuylen ◽  
Jie Li ◽  
Chao Lu
Keyword(s):  
Standard Deviation ◽  
Travel Time ◽  
Network Traffic ◽  
Traffic Management ◽  
Weighted Average ◽  
Network Density ◽  
Travel Time Reliability ◽  
Time Rate ◽  
Traffic Characteristics ◽  
Average Travel Time

The importance of travel time reliability in traffic management, control, and network design has received a lot of attention in the past decade. In this paper, a network travel time distribution model based on the Johnson curve system is proposed. The model is applied to field travel time data collected by Automated Number Plate Recognition (ANPR) cameras. We further investigate the network-level travel time reliability by connecting the network reliability measures such as the weighted standard deviation of travel time rate and the weighted skewness of travel time rate distributions with network traffic characteristics (e.g., the network density). The weighting is done with respect to the number of signalized intersections on a trip. A clear linear relation between the weighted average travel time rate and the weighted standard deviation of travel time rate can be observed for different time periods with time-varying demand. Furthermore, both the weighted average travel time rate and the weighted standard deviation of travel time rate increase monotonically with network density. The empirical findings of the relation between network travel time reliability and network traffic characteristics can be possibly applied to assess traffic management and control measures to improve network travel time reliability.

scholarly journals Synergy Degree Evaluation of Container Multimodal Transport System

2020 ◽  
Vol 12 (4) ◽  
pp. 1487 ◽  
Author(s):  
Xiaoping Fang ◽  
Zhang Ji ◽  
Zhiya Chen ◽  
Weiya Chen ◽  
Chao Cao ◽  
...  
Keyword(s):  
Transport System ◽  
Measurement Model ◽  
Practical Experience ◽  
Evaluation Index System ◽  
Research Perspective ◽  
Whole Process ◽  
Business Operations ◽  
Operation Process ◽  
Multimodal Transport ◽  
Depth Interviews

Logistics activities are an important source of energy consumption and environmental issues. Research conclusions and practical experience show that promoting the development of container multimodal transport is an effective way to reduce the level of carbon footprint. The key to influencing the development of container multimodal transport lies in the cooperation of all participants and links (modes of transport, transport businesses). Evaluating the synergy degree is a key step in this development process. This paper takes the whole process of container multimodal transportation as the research perspective, analyzes the operation process, and treats the process as a production system composed of four subsystems: facilities and equipment, organizational management, business operations, and information interactions. Through in-depth interviews and an analysis of the academic literature and policy documents, we establish a synergy degree evaluation index system and measurement model of container multimodal transport based on synergy theory and case studies. The research results are consistent with the actual situation. From 2015 to 2018, the synergy of container multimodal transport system of China’s G port developed slowly, but generally moved in a more orderly direction.

scholarly journals GIS-Based Evaluation Method for Accessibility of Social Infrastructure Facilities

2021 ◽  
Vol 11 (12) ◽  
pp. 5581
Author(s):  
Hayeon Yhee ◽  
Sungpyo Kim ◽  
Sanghyeok Kang
Keyword(s):  
South Korea ◽  
Travel Time ◽  
Evaluation Method ◽  
Comprehensive Evaluation ◽  
Weighted Average ◽  
Population Based ◽  
Social Infrastructure ◽  
Residential Areas ◽  
Poor Access ◽  
The Social

Social infrastructure is provided to improve the quality of life of residents. There are two approaches to social infrastructure planning: (1) a population-based approach and (2) an access-based approach. A plan for the social infrastructure facilities in South Korea has been developed based on the population or number of households in a region. Recently, the South Korean government presented a guideline in which accessibility is included in the criteria. This study proposes a comprehensive evaluation method for the accessibility of social infrastructure and for identifying residential areas with poor access. To obtain the travel time between the residence and the social infrastructure facility, we employed a navigation application programming interface that provides a travel time that reflects the resistances in an actual situation. The accessibility index (AI) is defined as a population-weighted average travel time. We also identified residential areas with poor access to social infrastructure by creating accessibility maps. This study includes social infrastructure facilities, such as parks, libraries, elementary schools, childcare centers, kindergartens, and sports facilities. The method proposed in this study was applied to Namdong-gu, Incheon Metropolitan City, South Korea, to evaluate its applicability. The proposed method has advantages in that (1) the AI is easy to understand because it represents an intuitive index for the overall accessibility in minutes of a region, and (2) accessibility maps effectively identify residential areas with poor access.

scholarly journals Bus arrival time prediction using mixed multi-route arrival time data at previous stop

Transport ◽  
2017 ◽  
Vol 33 (2) ◽  
pp. 543-554 ◽  
Author(s):  
Xuedong Hua ◽  
Wei Wang ◽  
Yinhai Wang ◽  
Min Ren
Keyword(s):  
Travel Time ◽  
Prediction Accuracy ◽  
Arrival Time ◽  
Weighted Average ◽  
Support Vector ◽  
Time Data ◽  
Time Prediction ◽  
Algorithm Comparison ◽  
Average Travel Time ◽  
Arrival Time Prediction

The primary objective of this paper is to develop models to predict bus arrival time at a target stop using actual multi-route bus arrival time data from previous stop as inputs. In order to mix and fully utilize the multiple routes bus arrival time data, the weighted average travel time and three Forgetting Factor Functions (FFFs) – F1, F2 and F3 – are introduced. Based on different combinations of input variables, five prediction models are proposed. Three widely used algorithms, i.e. Support Vector Machine (SVM), Artificial Neutral Network (ANN) and Linear Regression (LR), are tested to find the best for arrival time prediction. Bus location data of 11 road segments from Yichun (China), covering 12 bus stops and 16 routes, are collected to evaluate the performance of the proposed approaches. The results show that the newly introduced parameters, the weighted average travel time, can significantly improve the prediction accuracy: the prediction errors reduce by around 20%. The algorithm comparison demonstrates that the SVM and ANN outperform the LR. The FFFs can also affect the performance errors: F1 is more suitable for ANN algorithm, while F3 is better for SVM and LR algorithms. Besides, the virtual road concept in this paper can slightly improve the prediction accuracy and halve the time cost of predicted arrival time calculation.

scholarly journals Simulation Study of Dynamic Bus Lane Concept

2021 ◽  
Vol 13 (3) ◽  
pp. 1302
Author(s):  
Mateusz Szarata ◽  
Piotr Olszewski ◽  
Lesław Bichajło
Keyword(s):  
Genetic Algorithm ◽  
Travel Time ◽  
Simulation Study ◽  
Weighted Average ◽  
Model Parameters ◽  
Traffic Conditions ◽  
Average Travel Time ◽  
Bus Lane ◽  
Microsimulation Models ◽  
Exclusive Bus Lane

Not many publications are available on using microsimulation models to analyze the feasibility of implementing the dynamic bus lane (DBL) concept. The paper presents the methodology and calibration process used for DBL modeling. For the selected four sites in Rzeszów (Poland), three options were analyzed: no bus lane, standard exclusive bus lane (XBL), and dynamic bus lane. The analyses were carried out using PTV Vissim software with an additional logic script to control the DBL activation. Simulation model parameters were calibrated using a genetic algorithm. The final assessment of individual options was based on the weighted average travel time for all transport modes. The results show that the dynamic bus lane could bring the same benefits to public transport and cause only a slight increase in travel times in private transport compared to XBL. The XBL solution, depending on the site, led to increasing the average travel time in private transport by 12% to 25%, while the dynamic bus lane increased by 1% to 12%. Weighted average travel time per person is proposed as the overall indicator of efficiency. Preliminary analyses show that the bus volume, bus occupancy, routing, and traffic conditions will affect the efficiency of the new solution.

Semi-Enclosed Cold Forging Process Analysis and Progressive Die Design of CPU Fin

2008 ◽  
Vol 575-578 ◽  
pp. 174-179
Author(s):  
Juan Hua Su ◽  
Feng Zhang Ren ◽  
Lei Wang
Keyword(s):  
Production Efficiency ◽  
High Efficiency ◽  
Process Analysis ◽  
Die Design ◽  
Cold Forging ◽  
Forming Process ◽  
Element Analysis ◽  
Whole Process ◽  
Progressive Dies ◽  
Transfer Unit

This paper analyzes the forming process methods of fin used in CPU chip to emit heat. The whole process is blanking, the first forging forming, the second forging (sizing), and trimming. The chamfer design of CPU fin blank is simulated by finite element analysis. The optimized chamfer 1.6 mm is available. Semi-enclosed cold forging of progressive dies is put forward. The newly designed transfer unit is applied, which unifies the merit of high efficiency of the progressive dies and the high material-using ratio of the project die. Quick disassembly structure is designed and pins are used as quick disassembly pins by means of ball bearing bushing. The unique processing of the shearing scrap structure is adopted when designing the inverted trimming dies. Compared with the traditional die, the mechanization and electrization are realized to increase the production efficiency and get highly precise CPU fin.

scholarly journals Characteristics Analysis of Freight Mode Choice Model According to the Introduction of a New Freight Transport System

2019 ◽  
Vol 11 (4) ◽  
pp. 1209 ◽  
Author(s):  
Seungjin Shin ◽  
Hong-Seung Roh ◽  
Sung Hur
Keyword(s):  
Travel Time ◽  
Transport System ◽  
Choice Model ◽  
Stated Preference ◽  
Statistical Significance ◽  
Explanatory Power ◽  
Service Level ◽  
Freight Transport ◽  
Transport Cost ◽  
Transport Mode

The purpose of this study is to identify the characteristics of freight mode choices made by shippers and carriers with the introduction of a new freight transport system. We set an area in which actual freight transport takes place as the analysis scope and performed a survey of the shippers and carriers that transport containers to identify their stated preference (SP) regarding the new freight mode. The SP survey was carried out through an experimental design and this study considered the three factors of transport time, transport cost, and service level. This study compared and analyzed the models by distance using an individual behavior model. The results of estimating the model showed that the explanatory power of the model classified by distance and the individual parameters have statistical significance. The hit ratio was also high, which confirms that the model was estimated properly. In addition, the range of elasticity and the value of travel time analyzed using the model were evaluated to be appropriate compared to previous studies. The findings of the elasticity analysis show that strategies for reducing the transport cost are effective to increase the demand for the new transport mode. The value of travel time of freight transport was found to be higher than the current value generally applied in Korea. Considering that the value of travel time currently used is based on road freight transport, further research is required to apply a new value of travel time that reflects the characteristics of the new transport mode in the future.

Sign in / Sign up

Export Citation Format

Share Document