scholarly journals Towards Property Profiling: SYNTHESIS and SAR Probing of New Tetracyclic Diazaphenothiazine Analogues

2021 ◽  
Vol 22 (23) ◽  
pp. 12826
Author(s):  
Anna Empel ◽  
Andrzej Bak ◽  
Violetta Kozik ◽  
Malgorzata Latocha ◽  
Alois Cizek ◽  
...  
Keyword(s):  
Principal Component ◽  
The Novel ◽  
Structure Property ◽  
Phenothiazine Derivatives ◽  
Anticancer Activities ◽  
Related Activity ◽  
X Ray ◽  
Antibacterial Screening ◽  
Property Evaluation ◽  
Pyridine Fragment

A series of new tertiary phenothiazine derivatives containing a quinoline and a pyridine fragment was synthesized by the reaction of 1-methyl-3-benzoylthio-4-butylthioquinolinium chloride with 3-aminopyridine derivatives bearing various substituents on the pyridine ring. The direction and mechanism of the cyclization reaction of intermediates with the structure of 1-methyl-4-(3-pyridyl)aminoquinolinium-3-thiolate was related to the substituents in the 2- and 4-pyridine position. The structures of the compounds were analyzed using 1H, 13C NMR (COSY, HSQC, HMBC) and X-ray analysis, respectively. Moreover, the antiproliferative activity against tumor cells (A549, T47D, SNB-19) and a normal cell line (NHDF) was tested. The antibacterial screening of all the compounds was conducted against the reference and quality control strain Staphylococcus aureus ATCC 29213, three clinical isolates of methicillin-resistant S. aureus (MRSA). In silico computation of the intermolecular similarity was performed using principal component analysis (PCA) and hierarchical clustering analysis (HCA) on the pool of structure/property-related descriptors calculated for the novel tetracyclic diazaphenothiazine derivatives. The distance-oriented property evaluation was correlated with the experimental anticancer activities and empirical lipophilicity as well. The quantitative shape-based comparison was conducted using the CoMSA method in order to indicate the potentially valid steric, electronic and lipophilic properties. Finally, the numerical sampling of similarity-related activity landscape (SALI) provided a subtle picture of the SAR trends.

scholarly journals Synthesis, Superoxide Dismutase Mimetic and Anticancer Activities of Metal Complexes of 2,2-Dimethylpentanedioic Acid(2dmepdaH2) and 3,3-Dimethylpentanedioic acid(3dmepdaH2): X-Ray Crystal Structures of [Cu(3dmepda)(bipy)]2⋅6H2Oand [Cu(2dmepda)(bipy)(EtOH)]2⋅4EtOH(bipy=2,2′Bipyridine)

2006 ◽  
Vol 2006 ◽  
pp. 1-11 ◽  
Author(s):  
Michael Devereux ◽  
Malachy McCann ◽  
Denis O'Shea ◽  
Mark O'Connor ◽  
Eileen Kiely ◽  
...  
Keyword(s):  
Hepatocellular Carcinoma ◽  
Superoxide Dismutase ◽  
Metal Complexes ◽  
Crystal Structures ◽  
Cell Lines ◽  
Copper Complexes ◽  
The Novel ◽  
Anticancer Activities ◽  
Adenocarcinoma Cell ◽  
X Ray

2,2-dimethylpentanedioic acid (2dmepdaH2) and 3,3-dimethylpentanedioic acid (3dmepdaH2) reacted with copper(II) acetate to give [Cu(2dmepda)(H2O)3]2(1) and [Cu(3dmepda)(H2O)3]2(2). Reaction of (1) and (2) with 1,10-phenanthroline and 2,2′-bipyridine yielded [Cu(2dmepda)(phen)(H2O)]20.5phen (3), [Cu(2dmepda)(bipy)(H2O)]2(4), [Cu(2dmepda)(bipy)(EtOH)]2⋅2EtOH(4A), [Cu(3dmepda)(phen)(H2O)]2(5), and [Cu(3dmepda)(bipy)(H2O)]2⋅(6). The structures of (4A) and (6) each consists of a [Cu(bipy)(dicarboxylate)(solvent)]2dimer. The superoxide dismutase (SOD) mimetic activity of the novel copper complexes and their manganese analogues was investigated. The dimethyl sulphoxide(DMSO) soluble complexes (1)–(4) and (6) were assessed for their cancer chemotherapeutic potential towards hepatocellular carcinoma and kidney adenocarcinoma cell lines. The 1,10-phenanthroline containing complex [Cu(2dmepda)(phen)(H2O)]20.5phen (3) was the most potent with activity that compares well to that ofcisplatin.

Scanning x-ray fluorescence microscopy and principal component analysis

1992 ◽  
Vol 50 (2) ◽  
pp. 1752-1753
Author(s):  
Brian Cross
Keyword(s):  
Principal Component Analysis ◽  
Fluorescence Microscopy ◽  
Spatial Resolution ◽  
High Speed ◽  
Image Acquisition ◽  
Principal Component ◽  
Fluorescence Microscope ◽  
Acquisition Rate ◽  
X Ray ◽  
Speed Up

A relatively new entry, in the field of microscopy, is the Scanning X-Ray Fluorescence Microscope (SXRFM). Using this type of instrument (e.g. Kevex Omicron X-ray Microprobe), one can obtain multiple elemental x-ray images, from the analysis of materials which show heterogeneity. The SXRFM obtains images by collimating an x-ray beam (e.g. 100 μm diameter), and then scanning the sample with a high-speed x-y stage. To speed up the image acquisition, data is acquired "on-the-fly" by slew-scanning the stage along the x-axis, like a TV or SEM scan. To reduce the overhead from "fly-back," the images can be acquired by bi-directional scanning of the x-axis. This results in very little overhead with the re-positioning of the sample stage. The image acquisition rate is dominated by the x-ray acquisition rate. Therefore, the total x-ray image acquisition rate, using the SXRFM, is very comparable to an SEM. Although the x-ray spatial resolution of the SXRFM is worse than an SEM (say 100 vs. 2 μm), there are several other advantages.

Quantitative Analysis Of X-Ray Images From Geological Materials

1990 ◽  
Vol 48 (2) ◽  
pp. 244-245
Author(s):  
J. M. Paque ◽  
R. Browning ◽  
P. L. King ◽  
P. Pianetta
Keyword(s):  
Quantitative Analysis ◽  
Bulk Composition ◽  
Principal Component ◽  
Analytical Description ◽  
Bulk Sample ◽  
Geological Samples ◽  
X Ray ◽  
Software And Hardware ◽  
And Storage ◽  
Insight Into

Geological samples typically contain many minerals (phases) with multiple element compositions. A complete analytical description should give the number of phases present, the volume occupied by each phase in the bulk sample, the average and range of composition of each phase, and the bulk composition of the sample. A practical approach to providing such a complete description is from quantitative analysis of multi-elemental x-ray images.With the advances in recent years in the speed and storage capabilities of laboratory computers, large quantities of data can be efficiently manipulated. Commercial software and hardware presently available allow simultaneous collection of multiple x-ray images from a sample (up to 16 for the Kevex Delta system). Thus, high resolution x-ray images of the majority of the detectable elements in a sample can be collected. The use of statistical techniques, including principal component analysis (PCA), can provide insight into mineral phase composition and the distribution of minerals within a sample.

Ten-Vertex Polyhedral Monocarbaborane Chemistry. The Novel High-Yield Formation of the Ten-Vertex closo Compound [6-(PMe2Ph)-closo-1-CB9H9] from the Thermolysis of [8,8-(PMe2Ph)2-nido-8,7-PtCB9H11]

1993 ◽  
Vol 58 (12) ◽  
pp. 2924-2935 ◽  
Author(s):  
Jane H. Jones ◽  
Bohumil Štíbr ◽  
John D. Kennedy ◽  
Mark Thornton-Pett
Keyword(s):  
Nmr Spectroscopy ◽  
Diffraction Analysis ◽  
High Yield ◽  
Monoclinic Space Group ◽  
The Novel ◽  
X Ray Diffraction ◽  
Metal Centre ◽  
X Ray ◽  
Yield Formation ◽  
Boiling Toluene

Thermolysis of [8,8-(PMe2Ph)2-nido-8,7-PtCB9H11] in boiling toluene solution results in an elimination of the platinum centre and cluster closure to give the ten-vertex closo species [6-(PMe2Ph)-closo-1-CB9H9] in 85% yield as a colourles air stable solid. The product is characterized by NMR spectroscopy and single-crystal X-ray diffraction analysis. Crystals (from hexane-dichloromethane) are monoclinic, space group P21/c, with a = 903.20(9), b = 1 481.86(11), c = 2 320.0(2) pm, β = 97.860(7)° and Z = 8, and the structure has been refined to R(Rw) = 0.045(0.051) for 3 281 observed reflections with Fo > 2.0σ(Fo). The clean high-yield elimination of a metal centre from a polyhedral metallaborane or metallaheteroborane species is very rare.

scholarly journals Some Novel Cobalt Diphenylphosphine Complexes: Synthesis, Characterization, and Behavior in the Polymerization of 1,3-Butadiene

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 4067
Author(s):  
Giovanni Ricci ◽  
Giuseppe Leone ◽  
Giorgia Zanchin ◽  
Benedetta Palucci ◽  
Alessandra Forni ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Single Crystals ◽  
The Novel ◽  
X Ray Diffraction ◽  
X Ray ◽  
And Behavior

Some novel cobalt diphenylphosphine complexes were synthesized by reacting cobalt(II) chloride with (2-methoxyethyl)diphenylphosphine, (2-methoxyphenyl)diphenylphosphine, and 2-(1,1-dimethylpropyl)-6-(diphenylphosphino)pyridine. Single crystals suitable for X-ray diffraction studies were obtained for the first two complexes, and their crystal structure was determined. The novel compounds were then used in association with methylaluminoxane (MAO) for the polymerization of 1,3-butadiene, and their behavior was compared with that exhibited in the polymerization of the same monomer by the systems CoCl2(PnPrPh2)2/MAO and CoCl2(PPh3)2/MAO. Some significant differences were observed depending on the MAO/Co ratio used, and a plausible interpretation for such a different behavior is proposed.

scholarly journals The Influence of Varying Fluorination Patterns on the Thermodynamics and Kinetics of Benzenesulfonamide Binding to Human Carbonic Anhydrase II

Biomolecules ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 509 ◽  
Author(s):  
Steffen Glöckner ◽  
Khang Ngo ◽  
Björn Wagner ◽  
Andreas Heine ◽  
Gerhard Klebe
Keyword(s):  
Carbonic Anhydrase ◽  
Carbonic Anhydrase Ii ◽  
The Novel ◽  
Binding Modes ◽  
X Ray ◽  
Structure Activity ◽  
Small Set ◽  
Novel Method ◽  
Human Carbonic Anhydrase ◽  
Kinetics Of

The fluorination of lead-like compounds is a common tool in medicinal chemistry to alter molecular properties in various ways and with different goals. We herein present a detailed study of the binding of fluorinated benzenesulfonamides to human Carbonic Anhydrase II by complementing macromolecular X-ray crystallographic observations with thermodynamic and kinetic data collected with the novel method of kinITC. Our findings comprise so far unknown alternative binding modes in the crystalline state for some of the investigated compounds as well as complex thermodynamic and kinetic structure-activity relationships. They suggest that fluorination of the benzenesulfonamide core is especially advantageous in one position with respect to the kinetic signatures of binding and that a higher degree of fluorination does not necessarily provide for a higher affinity or more favorable kinetic binding profiles. Lastly, we propose a relationship between the kinetics of binding and ligand acidity based on a small set of compounds with similar substitution patterns.

scholarly journals A Strategy for Dimensionality Reduction and Data Analysis Applied to Microstructure–Property Relationships of Nanoporous Metals

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1822
Author(s):  
Norbert Huber
Keyword(s):  
Machine Learning ◽  
Dimensionality Reduction ◽  
Work Hardening ◽  
Large Range ◽  
Scaling Law ◽  
Principal Component ◽  
Underlying Structure ◽  
Structure Property ◽  
Work Hardening Rate ◽  
Nanoporous Metals

Nanoporous metals, with their complex microstructure, represent an ideal candidate for the development of methods that combine physics, data, and machine learning. The preparation of nanporous metals via dealloying allows for tuning of the microstructure and macroscopic mechanical properties within a large design space, dependent on the chosen dealloying conditions. Specifically, it is possible to define the solid fraction, ligament size, and connectivity density within a large range. These microstructural parameters have a large impact on the macroscopic mechanical behavior. This makes this class of materials an ideal science case for the development of strategies for dimensionality reduction, supporting the analysis and visualization of the underlying structure–property relationships. Efficient finite element beam modeling techniques were used to generate ~200 data sets for macroscopic compression and nanoindentation of open pore nanofoams. A strategy consisting of dimensional analysis, principal component analysis, and machine learning allowed for data mining of the microstructure–property relationships. It turned out that the scaling law of the work hardening rate has the same exponent as the Young’s modulus. Simple linear relationships are derived for the normalized work hardening rate and hardness. The hardness to yield stress ratio is not limited to 1, as commonly assumed for foams, but spreads over a large range of values from 0.5 to 3.

Effect of pouring temperature on A356-TiB2 MMCs cast in sand and permanent moulds by in-situ method

2016 ◽  
Vol 25 (5-6) ◽  
pp. 165-169
Author(s):  
C. Rajaravi ◽  
P.R. Lakshminarayanan
Keyword(s):  
Evaluation Studies ◽  
Physical And Mechanical Properties ◽  
Xrd Analysis ◽  
Matrix Composites ◽  
Structure Property ◽  
Pouring Temperature ◽  
Matrix Metal ◽  
Property Evaluation ◽  
The Matrix

AbstractThe paper describes a different condition of pouring temperature by sand and permanent mould to produce A356-6 wt% TiB2 metal matrix composites by in-situ method salt metal reaction route. The observation of SEM micrographs shows particle distribution of the TiB2 and it appears in hexagonal shape in Al matrix. The results of X-ray diffraction (XRD) analysis confirmed the formation of those TiB2 particulates and the results showed TiB2 particles are homogeneously dispersed throughout the matrix metal. Subsequent structure-property evaluation studies indicated sub-micron size reinforcement of in-situ formed TiB2 particles with improved physical and mechanical properties as compared to sand and permanent mould of Al-TiB2 composites. From, the permanent mould Al-TiB2 composite has an advantage of increase the properties over sand mould Al-TiB2 composite.

scholarly journals Insertion of Phosphenium Ions into a Bicyclo[1.1.0]Tetraphosphabutane Iron Complex

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3920
Author(s):  
Martin Weber ◽  
Gábor Balázs ◽  
Alexander V. Virovets ◽  
Eugenia Peresypkina ◽  
Manfred Scheer
Keyword(s):  
Diffraction Analysis ◽  
Room Temperature ◽  
31P Nmr ◽  
Spectroscopic Studies ◽  
Iron Complex ◽  
The Novel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Phosphenium Ions

By reacting [{Cp‴Fe(CO)2}2(µ,η1:1-P4)] (1) with in situ generated phosphenium ions [Ph2P][A] ([A]− = [OTf]− = [O3SCF3]−, [PF6]−), a mixture of two main products of the composition [{Cp‴Fe(CO)2}2(µ,η1:1-P5(C6H5)2)][PF6] (2a and 3a) could be identified by extensive 31P NMR spectroscopic studies at 193 K. Compound 3a was also characterized by X-ray diffraction analysis, showing the rarely observed bicyclo[2.1.0]pentaphosphapentane unit. At room temperature, the novel compound [{Cp‴Fe}(µ,η4:1-P5Ph2){Cp‴(CO)2Fe}][PF6] (4) is formed by decarbonylation. Reacting 1 with in situ generated diphenyl arsenium ions gives short-lived intermediates at 193 K which disproportionate at room temperature into tetraphenyldiarsine and [{Cp‴Fe(CO)2}4(µ4,η1:1:1:1-P8)][OTf]2 (5) containing a tetracyclo[3.3.0.02,7.03,6]octaphosphaoctane ligand.

Sign in / Sign up

Export Citation Format

Share Document