scholarly journals Osteogenic Cell Behavior on Titanium Surfaces in Hard Tissue

2019 ◽  
Vol 8 (5) ◽  
pp. 604 ◽  
Author(s):  
Jung-Yoo Choi ◽  
Tomas Albrektsson ◽  
Young-Jun Jeon ◽  
In-Sung Luke Yeo

It is challenging to remove dental implants once they have been inserted into the bone because it is hard to visualize the actual process of bone formation after implant installation, not to mention the cellular events that occur therein. During bone formation, contact osteogenesis occurs on roughened implant surfaces, while distance osteogenesis occurs on smooth implant surfaces. In the literature, there have been many in vitro model studies of bone formation on simulated dental implants using flattened titanium (Ti) discs; however, the purpose of this study was to identify the in vivo cell responses to the implant surfaces on actual, three-dimensional (3D) dental Ti implants and the surrounding bone in contact with such implants at the electron microscopic level using two different types of implant surfaces. In particular, the different parts of the implant structures were scrutinized. In this study, dental implants were installed in rabbit tibiae. The implants and bone were removed on day 10 and, subsequently, assessed using scanning electron microscopy (SEM), immunofluorescence microscopy (IF), transmission electron microscopy (TEM), focused ion-beam (FIB) system with Cs-corrected TEM (Cs-STEM), and confocal laser scanning microscopy (CLSM)—which were used to determine the implant surface characteristics and to identify the cells according to the different structural parts of the turned and roughened implants. The cell attachment pattern was revealed according to the different structural components of each implant surface and bone. Different cell responses to the implant surfaces and the surrounding bone were attained at an electron microscopic level in an in vivo model. These results shed light on cell behavioral patterns that occur during bone regeneration and could be a guide in the use of electron microscopy for 3D dental implants in an in vivo model.

Coatings ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1035
Author(s):  
Mohammed E. Sayed ◽  
Maryam H. Mugri ◽  
Mazen A. Almasri ◽  
Manea Musa Al-Ahmari ◽  
Shilpa Bhandi ◽  
...  

Dental implants are a widely used treatment modality for oral rehabilitation. Implant failures can be a result of many factors, with poor osseointegration being the main culprit. The present systematic review aimed to assess the effect of stem cells on the osseointegration of dental implants. An electronic search of the MEDLINE, LILACS, and EMBASE databases was conducted. We examined quantitative preclinical studies that reported on the effect of mesenchymal stem cells on bone healing after implant insertion. Eighteen studies that fulfilled the inclusion criteria were included. Various surface modification strategies, sites of placement, and cell origins were analyzed. The majority of the selected studies showed a high risk of bias, indicating that caution must be exercised in their interpretation. All the included studies reported that the stem cells used with graft material and scaffolds promoted osseointegration with higher levels of new bone formation. The mesenchymal cells attached to the implant surface facilitated the expression of bio-functionalized biomaterial surfaces, to boost bone formation and osseointegration at the bone–implant interfaces. There was a promotion of osteogenic differentiation of human mesenchymal cells and osseointegration of biomaterial implants, both in vitro and in vivo. These results highlight the significance of biomodified implant surfaces that can enhance osseointegration. These innovations can improve the stability and success rate of the implants used for oral rehabilitation.


2020 ◽  
Vol 61 (6) ◽  
pp. 177-187
Author(s):  
Till Kämmerer ◽  
Tony Lesmeister ◽  
Victor Palarie ◽  
Eik Schiegnitz ◽  
Andrea Schröter ◽  
...  

Introduction: We aimed to compare implant osseointegration with calcium phosphate (CaP) surfaces and rough subtractive-treated sandblasted/acid etched surfaces (SA) in an in vivo minipig mandible model. Materials and Methods: A total of 36 cylindrical press-fit implants with two different surfaces (CaP, n = 18; SA, n = 18) were inserted bilaterally into the mandible of 9 adult female minipigs. After 2, 4, and 8 weeks, we analyzed the cortical bone-to-implant contact (cBIC; %) and area coverage of bone-to-implant contact within representative bone chambers (aBIC; %). Results: After 2 weeks, CaP implants showed no significant increase in cBIC and aBIC compared to SA (cBIC: mean 38 ± 5 vs. 16 ± 11%; aBIC: mean 21 ± 1 vs. 6 ± 9%). Two CaP implants failed to achieve osseointegration. After 4 weeks, no statistical difference between CaP and SA was seen for cBIC (mean 54 ± 15 vs. 43 ± 16%) and aBIC (mean 43 ± 28 vs. 32 ± 6). However, we excluded two implants in each group due to failure of osseointegration. After 8 weeks, we observed no significant intergroup differences (cBIC: 18 ± 9 vs. 18 ± 20%; aBIC: 13 ± 8 vs. 16 ± 9%). Again, three CaP implants and two SA implants had to be excluded due to failure of osseointegration. Conclusion: Due to multiple implant losses, we cannot recommend the oral mandibular minipig in vivo model for future endosseous implant research. Considering the higher rate of osseointegration failure, CaP coatings may provide an alternative to common subtractive implant surface modifications in the early phase post-insertion.


2020 ◽  
Vol 18 ◽  
pp. 228080002097517
Author(s):  
Yuan-ming Geng ◽  
Dong-ni Ren ◽  
Shu-yi Li ◽  
Zong-yi Li ◽  
Xiao-qing Shen ◽  
...  

Background: Poly Ether Ether Ketone (PEEK) has been considered as a potential alternative material for endosseous dental implants, for its low elastic modulus, biocompatibility, and low cost in customized device manufacture. Hydroxyapatite-incorporation is supposed to improve the poor osseointegration of PEEK. Methods: In the present study we analyzed the in vivo response of hydroxyapatite-incorporated PEEK (PEEK-HA) implants in canine tibia. PEEK-HA and PEEK implants were implanted and were examined 4 weeks and 12 weeks after implantation with radiology and histology. Commercial titanium dental implants served as controls. Results: The ratio of bone volume to tissue volume of PEEK-HA implants was higher than that of PEEK implants 4 weeks after implantation in the μ-CT analysis. The bone implant contact of PEEK and PEEK-HA implants showed no statistical difference in the histological examination, but newly-formed bone around PEEK-HA implants showed more signs of mineralization than that around PEEK implants. Conclusion: The study suggested that bone formation was improved with hydroxyapatite-incorporation in PEEK. Hydroxyapatite-incorporated PEEK implants may represent a potential material for endosseous dental implant.


1962 ◽  
Vol 12 (2) ◽  
pp. 385-410 ◽  
Author(s):  
Sanford L. Palay ◽  
S. M. McGee-Russell ◽  
Spencer Gordon ◽  
Mary A. Grillo

This paper describes in detail a method for obtaining nearly uniform fixation of the nervous system by vascular perfusion with solutions of osmium tetroxide. Criteria are given for evaluating the degree of success achieved in the preservation of all the cellular components of the nervous system. The method permits analysis of the structural relations between cells at the electron microscopic level to an extent that has not been possible heretofore.


1982 ◽  
Vol 30 (5) ◽  
pp. 481-486 ◽  
Author(s):  
R E McClung ◽  
J Wood

Analytical electron microscopy was used to determine the quantitative effects of paraformaldehyde pretreatment on the formation of the biogenic amine-glutaraldehyde-chrome complex. Pretreatment with paraformaldehyde prevented the glutaraldehyde-chrome reaction with norepinephrine in the rat adrenal medulla. In contrast to the effect of paraformaldehyde on norepinephrine, pretreatment did not prevent the chrome reaction in serotonin-containing argentaffin cells of the gut. X-Ray energy spectrographic analysis revealed a significant decrease in chrome content in the paraformaldehyde treated tissue, but sufficient chrome did react to produce an electron-dense product. Thus by treating tissue with paraformaldehyde prior to the glutaraldehyde chrome procedure, serotonergic sites may be differentiated from catecholaminergic areas at the electron microscopic level.


2002 ◽  
Vol 22 (5) ◽  
pp. 586-595 ◽  
Author(s):  
Karin Pierre ◽  
Pierre J. Magistretti ◽  
Luc Pellerin

Although previous Northern blot and in situ hybridization studies suggested that neurons express the monocarboxylate transporter MCT2, subsequent immunohistochemical analyzes either failed to confirm the presence of this transporter or revealed only a low density of immunolabeled neuronal processes in vivo. The authors report that appropriate section pretreatment (brief warming episode or proteinase K exposure) leads to extensive labeling of the neuropil, which appears as tiny puncta throughout the whole mouse brain. In addition, intense MCT2 immunoreactivity was found in cerebellar Purkinje cell bodies and their processes, on mossy fibers in the cerebellum, and on sensory fibers in the brainstem. Double immunofluorescent labeling with appropriate markers and observation with epifluorescence and confocal microscopy did not show extensive colocalization of MCT2 immunoreactivity with presynaptic or postsynaptic elements, but colocalization could be observed occasionally in the cortex with the postsynaptic density protein PSD95. Observations made at the electron microscopic level in the cortex corroborated these results and showed that MCT2 immunoreactivity was associated with wide membrane segments of neuronal processes. These data provide convincing evidence that MCT2 represents a major neuronal monocarboxylate transporter in the adult mouse brain, and further suggest that mature neurons could use monocarboxylates such as lactate as additional energy substrates.


1998 ◽  
Vol 4 (S2) ◽  
pp. 440-441
Author(s):  
Maryann E. Martone ◽  
Andrea Thor ◽  
Stephen J. Young ◽  
Mark H. Ellisman.

Light microscopic imaging has experienced a renaissance in the past decade or so, as new techniques for high resolution 3D light microscopy have become readily available. Light microscopic (LM) analysis of cellular details is desirable in many cases because of the flexibility of staining protocols, the ease of specimen preparation and the relatively large sample size that can be obtained compared to electron microscopic (EM) analysis. Despite these advantages, many light microscopic investigations require additional analysis at the electron microscopic level to resolve fine structural features.High voltage electron microscopy allows the use of relatively thick sections compared to conventional EM and provides the basis for excellent new methods to bridge the gap between microanatomical details revealed by LM and EM methods. When combined with electron tomography, investigators can derive accurate 3D data from these thicker specimens. Through the use of correlated light and electron microscopy, 3D reconstructions of large cellular or subcellular structures can be obtained with the confocal microscope,


1991 ◽  
Vol 81 (6) ◽  
pp. 294-299
Author(s):  
J Atkin ◽  
VW Thompson ◽  
RB Boyd

Duchenne muscular dystrophy is a genetic disease with a sex-linked pattern of inheritance. This disease is present at birth, becomes symptomatic during early childhood, leads to inability to walk near the end of the first decade, and usually results in death by the end of the second decade. In this study, the extensor digitorum longus and soleus muscles from genetically dystrophic mice were examined at the electron microscopic level. The authors describe their results and discuss how these findings might provide some insight into one of the mechanisms of fiber necrosis in Duchenne muscular dystrophy.


Blood ◽  
2013 ◽  
Vol 122 (21) ◽  
pp. 881-881 ◽  
Author(s):  
Michaela R Reagan ◽  
Archana Swami ◽  
Pamela A Basto ◽  
Yuji Mishima ◽  
Jinhe Liu ◽  
...  

Abstract Introduction The bone marrow (BM) niche is known to exert a protective effect on lymphoid tumors, such as multiple myeloma (MM), where mesenchymal stem cell interactions with clonal plasma cells increase tumor proliferation and survival. However, certain cells within the BM milieu, such as mature osteoblasts and osteocytes, have demonstrated the potential to inhibit tumor growth; utilizing these cells presents a promising new anti-cancer approach. Hence, designing better methods of bone-specific delivery for both direct cancer cell treatment and indirect treatment through the modulation of bone cells may result in a potent, two-pronged anti-cancer strategy. Our work aimed to develop a novel system to target both MM and bone cells to induce greater osteogenesis and hamper tumor growth. Methods PEG–PLGA nanoparticles (NPs) coupled to alendronate (“bone-targeted”) or alone (“non-targeted”) were formulated and loaded with bortezomib (“BTZ-NPs”) or left empty (“BTZ-free”). NPs were characterized for their physiochemical properties, including size (using dynamic light scattering; surface charges (Zeta potential); and bone affinity (using hydroxyapatite binding). NPs were engineered with different formulation methods and those with the optimal physiochemical characteristics and drug encapsulation efficiency were used for further studies. BTZ release kinetics were analyzed using HPLC. Anti-MM effects were assessed in vitro using MTT, bioluminescence (BLI) and Annexin V/PI apoptosis flow cytometry analysis on MM1S cells. In vivo, efficacy was measured by mouse weight, BLI and survival after i.v. cancer cell injections in mice. Cellular uptake was assessed in vitro by flow cytometry and in vivo biodistribution was assessed using fluorescent whole body and fixed section imaging. Bone specificity was assessed in vitro by co-culture of bone-targeted and non-targeted NPs with bone chips or hydroxyapatite using fluorescence and TEM imaging. In an in vivo model of myeloma treatment, female Nod/SCID beige mice were injected i.v. with 4 × 106 Luc+/GFP+ MM1S cells and, at day 21, treated with a) BTZ, b) BTZ-bone-targeted NPs, c) BTZ-non-targeted NPs or d) BTZ-free bone-targeted NPs. Using an in vivo model of pre-treatment for cancer prevention, mice were pre-treated with i.p. injections of BTZ-bone-targeted NPs and appropriate controls thrice weekly for 3 weeks. They were then injected i.v. with Luc+/GFP+ 5TGM1 or MM1S cells and monitored for BLI and survival. Static and dynamic bone histomorphometry and μCT were used to assess effects of pre-treatment on bone formation and osteolysis prevention. Results Our biodegradable, NPs had uniform size distribution within the range of 100 to 200 nm based on the type of formulation, with a zeta potential of ±5mV. Bone- targeted NPs showed high affinity towards bone mineral in vitro and better skeletal accumulation in vivo compared to non-targeted NPs. NPs were easily up-taken by cells in vitro, and BTZ release kinetics showed a burst followed by a sustained-release pattern over 60 hrs. BTZ-NPs induced apoptosis in MM cells in vitro. Importantly, BTZ-bone-targeted-NP pre-treated mice showed significantly less tumor burden (BLI) and longer survival than free drug or drug-free bone-targeted NPs, thus demonstrating a tumor-inhibiting effect unique to the BTZ-bone-targeted-NPs. Pre-treatment with BTZ increased bone formation in tibias and femurs, as measured by μCT of bone volume/total volume, and trabecular thickness and number, suggesting that increased bone volume may inhibit MM. In a second mouse model, both BTZ-bone-targeted NPs and BTZ-free NPs were equally able to reduce tumor growth in vivo when given after tumor formation. Conclusion Bone-targeted nanoparticles hold great potential for clinical applications in delivering chemotherapies to bone marrow niches, reducing off-target effects, increasing local drug concentrations, and lengthening the therapeutic window. BTZ-bone-targeted NPs are able to slow tumor growth and increase survival in mice when used as a pre-treatment. This may result, at least in part, from BTZ-induced increased bone formation. These findings indicate that BTZ-bone-targeted NPs exert a chemopreventive effect in MM in vivo, thus suggesting their potential use in the clinical setting. Disclosures: Basto: BIND Therapeutics: Patent licensed by BIND, Patent licensed by BIND Patents & Royalties. Farokhzad:BIND Therapeutics: Employment, Equity Ownership; Selecta Biosciences: Employment, Equity Ownership. Ghobrial:Onyx: Membership on an entity’s Board of Directors or advisory committees; BMS: Membership on an entity’s Board of Directors or advisory committees; BMS: Research Funding; Sanofi: Research Funding; Novartis: Membership on an entity’s Board of Directors or advisory committees.


Author(s):  
Karthikeyan Subramani

This manuscript reviews about titanium surface modification techniques for its application in orthopaedic and dental implants. There are a few limitations in the long term prognosis of orthopaedic and dental implants. Poor osseointegration with bone, periimplant infection leading to implant failure and short term longevity demanding revision surgery, are to mention a few. Micro- and nanoscale modification of titanium surface using physicochemical, morphological and biochemical approaches have resulted in higher bone to implant contact ratio and improved osseointegration. With recent advances in micro, nano-fabrication techniques and multidisciplinary research studies focusing on bridging biomaterials for medical applications, TiO2 nanotubes have been extensively studied for implant applications. The need for titanium implant surface that can closely mimic the nanoscale architecture of human bone has become a priority. For such purpose, TiO2 nanotubes of different dimensions and architectural fashions at the nanoscale level are being evaluated. This manuscript discusses in brief about the in-vitro and in-vivo studies on titanium surface modification techniques. This manuscript also addresses the recent studies done on such nanotubular surfaces for the effective delivery of osteoinductive growth factors and anti bacterial/ anti inflammatory drugs to promote osseointegration and prevent peri-implant infection.


Sign in / Sign up

Export Citation Format

Share Document