scholarly journals Construction Materials from Vitrified Lignite Fly Ash in Plasmatron Plasma Reactor

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 905 ◽  
Author(s):  
Jakub Szałatkiewicz
Keyword(s):  
Fly Ash ◽  
Building Materials ◽  
Plasma Reactor ◽  
Construction Materials ◽  
Chemical Properties ◽  
Building Construction ◽  
Total Power ◽  
Process Conditions ◽  
Lignite Fly Ash ◽  
And Chemical Properties

This article presents results of an investigation of vitrified (melted) fly ash samples from lignite (brown coal) in a plasmatron plasma reactor, to determine its mechanical and chemical properties. The XRF elemental analysis results of sample tests, from before the vitrification process and after the vitrification process are shown. The experiments were carried out in a plasma plasmatron reactor with a total power of 65 kW, enabling testing on a quarter technical scale. During the tests, samples of fly ash of about 4 kg mass were processed under selected process conditions. Produced samples of vitrified materials were analyzed in accordance to the requirements for building/construction materials. Results from this investigation confirm its quality to be used as concrete and cement filler, as an addition, and as synthetic aggregate, safe for the environment and neutral for cements. Also the most important leaching of heavy metals to water was analyzed which confirmed meeting of all of requirements necessary to use this material in building materials.

scholarly journals Utilization of Pet Wastes Aggregate in Building Construction - A Review

2020 ◽  
Vol 9 (3) ◽  
pp. 656-663
Keyword(s):  
Building Materials ◽  
Construction Materials ◽  
Chemical Properties ◽  
Waste Recycling ◽  
Building Construction ◽  
Recycled Pet ◽  
Pet Waste ◽  
Physical And Chemical ◽  
Plastic Containers ◽  
And Chemical Properties

The rapid increase of plastics waste produced worldwide today poses a danger to human health because of the pollution caused by the unsafe disposal and non-biodegradability of this waste combined with toxic gas emissions during incineration. Globally, PET (polyethylene terephalate) is commonly used for bottling water and other plastic containers. Recycling the waste would be an additional benefit. This study focuses some researchers on the forms, methods of recycling and various literature applications of PET wastes. Recycled PET can of course be used when combined with the sand aggregate to manufacture of various construction materials, such as tiles, bricks, paving stones etc. This research focuses on its application as it attracts substantial building materials such as the manufacture of various PET waste tiles and their unique mechanical , physical and chemical properties; There are some important studies discussed in relation to PET waste, recycling methods , and results from the study. Even various applications are described here. Its usefulness is further defined as roofing Composite concrete, floor tiling and other applications

Development of Sustainable Alternative Building Materials from Quarry Dust

2018 ◽  
Vol 761 ◽  
pp. 181-188
Author(s):  
Ehud Cohen ◽  
Gabriela Bar Nes ◽  
Alva Peled
Keyword(s):  
Fly Ash ◽  
Building Material ◽  
Building Materials ◽  
Waste Product ◽  
Mining Industry ◽  
Chemical Properties ◽  
High Volume ◽  
Waste Products ◽  
Quarry Dust ◽  
And Chemical Properties

The main goal of our work is to develop an alternative building material based on “zero waste” objective, thus creating commercially valuable products from materials that are otherwise high-volume waste products. Fine dolomitic quarry dust is a waste product manufactured in several millions of cubic tons each year in the mining industry of Israel. Our study examines a sustainable and useful solution to use this quarry dust (QD) as a part of fly ash based geopolymeric systems. Mechanical, thermal and chemical properties were examined and analyzed.

scholarly journals Eco-Compatible Construction Materials Containing Ceramic Sludge and Packaging Glass Cullet

2021 ◽  
Vol 11 (8) ◽  
pp. 3545
Author(s):  
Fernanda Andreola ◽  
Isabella Lancellotti ◽  
Paolo Pozzi ◽  
Luisa Barbieri
Keyword(s):  
Raw Materials ◽  
Construction Materials ◽  
Treatment Plant ◽  
Glass Ceramics ◽  
Chemical Properties ◽  
Linear Shrinkage ◽  
Glass Cullet ◽  
Commercial Glass ◽  
Packaging Glass ◽  
And Chemical Properties

This research reports results of eco-compatible building material obtained without natural raw materials. A mixture of sludge from a ceramic wastewater treatment plant and glass cullet from the urban collection was used to obtain high sintered products suitable to be used as covering floor/wall tiles in buildings. The fired samples were tested by water absorption, linear shrinkage, apparent density, and mechanical and chemical properties. Satisfactory results were achieved from densification properties and SEM/XRD analyses showed a compact polycrystalline microstructure with albite and wollastonite embedded in the glassy phase, similar to other commercial glass-ceramics. Besides, the products were obtained with a reduction of 200 °C with respect to the firing temperatures of commercial ones. Additionally, the realized materials were undergone to leaching test following Italian regulation to evaluate the mobility of hazardous ions present into the sludge. The data obtained verified that after thermal treatment the heavy metals were immobilized into the ceramic matrix without further environmental impact for the product use. The results of the research confirm that this valorization of matter using only residues produces glass ceramics high sintered suitable to be used as tile with technological properties similar or higher than commercial ones.

Monitoring of Fluctuations in the Physical and Chemical Properties of a High-Calcium Fly Ash

1987 ◽  
Vol 113 ◽  
Author(s):  
Scott Schlorholtz ◽  
Ken Bergeson ◽  
Turgut Demirel
Keyword(s):  
Fly Ash ◽  
Chemical Properties ◽  
Operating Conditions ◽  
Physical And Chemical Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Morphological Studies ◽  
High Calcium ◽  
Physical And Chemical ◽  
And Chemical Properties

ABSTRACTThe physical and chemical properties of fly ash produced at Ottumwa Generating Station have been monitored since April, 1985. The fly ash is produced from burning a low sulfur, sub-bituminous coal obtained from the Powder River Basin near Gillette, Wyoming. One-hundred and sixty samples of fly ash were obtained during the two year period. All of the samples were subjected to physical testing as specified by ASTM C 311. About one-hundred of the samples were also subjected to a series of tests designed to monitor the self-cementing properties of the fly ash. Many of the fly ash samples were subjected to x-ray diffraction and fluorescence analysis to define the mineralogical and chemical composition of the bulk fly ash as a function of sampling date. Hydration products in selected hardened fly ash pastes, were studied by x-ray diffraction and scanning electron microscopy. The studies indicated that power plant operating conditions influenced the compressive strength of the fly ash paste specimens. Mineralogical and morphological studies of the fly ash pastes indicated that stratlingite formation occurred in the highstrength specimens, while ettringite was the major hydration product evident in the low-strength specimens.

TRACE ELEMENT ANALYSIS OF FLY ASH BY PIXE

1999 ◽  
Vol 09 (03n04) ◽  
pp. 417-422 ◽  
Author(s):  
V. VIJAYAN ◽  
S. N. BEHERA
Keyword(s):  
Fly Ash ◽  
Trace Element ◽  
Power Plants ◽  
Building Materials ◽  
Thermal Power ◽  
Trace Element Analysis ◽  
Chemical Properties ◽  
Solid Material ◽  
Thermal Power Plants ◽  
Element Analysis

Fly ash is a major component of solid material generated by the coal-fired thermal power plants. In India the total amount of fly ash produced per annum is around 100 million tonnes. Fly ash has a great potential for utilization in making industrial products such as cement, bricks as well as building materials, besides being used as a soil conditioner and a provider of micro nutrients in agriculture. However, given the large amount of fly ash that accumulate at thermal power plants, their possible reuse and dispersion and mobilization into the environment of the various elements depend on climate, soils, indigenous vegetation and agriculture practices. Fly ash use in agriculture improved various physico-chemical properties of soil, particularly the water holding capacity, porosity and available plant nutrients. However it is generally apprehended that the application of large quantity of fly ash in fields may affect the plant growth and soil texture. Hence there is a need to characterize trace elements of fly ash. The results of trace element analysis of fly ash and pond ash samples collected from major thermal power plants of India by Particle Induced X-ray Emission (PIXE) have been discussed.

scholarly journals A Novel Method for nZEB Internal Coverings Design Based on Neural Networks

Coatings ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 288 ◽  
Author(s):  
José A. Orosa ◽  
Diego Vergara ◽  
Ángel M. Costa ◽  
Rebeca Bouzón
Keyword(s):  
Building Materials ◽  
International Energy Agency ◽  
Construction Materials ◽  
Real Data ◽  
Point Of View ◽  
Building Construction ◽  
Sampled Data ◽  
Energy Agency ◽  
Vapour Permeability ◽  
Weather Changes

Research from the International Energy Agency about indoor ambiences and nearly zero energy buildings (nZEB) in the past has been centred on different aspects such as the prediction of indoor conditions as a function of the weather using laboratory material properties for simulations and real sampled data for validation. Thus, it is possible to use real data for defining behavioural groups of indoor ambiences as a function of real vapour permeability of internal coverings. However, this method is not suitable for modelling it and predicting its behaviour under weather changes, which is of interest to improve the method of selection and use of building construction materials. In this research, artificial intelligence procedures were employed as the first model of permeable coverings material behaviour to provide a newer understanding of building materials and applications for the generation of new control procedures between the mechanical and electronic point of view of building construction materials.

Mechanical Properties of Mortars Prepared by Alkali Activated Fly Ash Coming from Different Production Batches

2015 ◽  
Vol 244 ◽  
pp. 140-145 ◽  
Author(s):  
Matej Špak ◽  
Pavel Raschman
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Construction Materials ◽  
Chemical Properties ◽  
Raw Material ◽  
Fly Ashes ◽  
Coal Burning ◽  
Alkali Solutions ◽  
One Year ◽  
Alkali Activated

Fly ash is a well utilizable secondary raw material for the production of alkali activated construction materials. It is a significant alumina-silicates source suitable for the chemical reaction resulting in hardened composites. Physical and chemical properties of fly ashes as a co-product of coal burning mainly depend on characteristics of coal, burning temperature and combustion conditions. High variability of the properties of fly ash causes an uncertainty in the properties of alkali activated mortars. Time behaviour of the composition of the fly ash produced in a heating plant located in Košice, Slovakia as well as leaching behaviour of both alumina and silica from particular batches during one-year period was documented. Leaching tests were carried out using the distilled water and alkali solutions with three different concentrations. Both compressive and tensile strengths of alkali activated mortars were measured, and the correlation between the mechanical properties of hardened mortars and the chemical composition of fly ashes as well as their leaching characteristics was investigated.

Sign in / Sign up

Export Citation Format

Share Document