The Influence of the Hydrophobic Polymeric Coating on 5-ASA Release from the Bipolymeric Milibeads with Amidated Pectin

The industrial polymeric carriers for peroral mesalazine application exploit, i.a., cellulose or polyacrylic acid derivatives, polyvinylpyrrolidone, and modified starch. Pectins, as natural polymers, are interesting materials in pharmaceutical applications due to properties such as non-toxicity, biocompatibility, and biodegradability. The aim of the study was the evaluation of the release of the drug from coated pectin beads doped with synthetic polymers as drug carriers to the colon, as well as interactions between ingredients. The drug release was carried out using basket apparatus. The amount of 5-ASA (5-aminosalicylic acid, mesalazine) released to the pH = 7.4 buffer with pectinase was measured at selected time intervals using UV-Vis spectroscopy. The zero-, first-, and second-order kinetics, as well as Higuchi, Korsmeyer–Peppas, and Hixon–Crowell equations, were used to analyze the release pattern. The interactions between beads components were investigated employing FTIR spectrophotometry and DSC study. The dissolution of the drug was divided into two parts. It was found that the release of 5-ASA followed mainly the Higuchi equation. The mass transport in the first stage of the release followed a non-Fickian model and the parameter n was in the range of 0.74 ± 0.2–0.99 ± 0.2. The formulation doped with PA (polyacrylic acid) was the most appropriate and capable of overcoming the variable conditions of the gastrointestinal tract.

Fermentation study of Cassava bagasse starch hydrolyzed's using INIAP 650 and INIAP 651 varieties and a strain of Lactobacillus leichmannii for the lactic acid production

Ecuador is an agricultural country, which has an actual production of starch obtained from cassava. Tuber processing residues do not have an economic impact; for example, the cassava bagasse, only used for plant fertilization and animal feeding. This project aimed to study the influence of the fermentation variables (pH and agitation), on the lactic acid production. Enzymatic hydrolysis of cassava bagasse starch for the varieties INIAP 650 and INIAP 651 was performed using α-amylase and glucoamylase. Then, glucose was fermented by Lactobacillus leichmannii ATCC 7830 strains, varying conditions such as agitation (150 rpm and absence) and pH (4.5, 5.0, and 5.5). Finally, the determination of lactic acid was performed by potentiometric and FTIR analysis. Conversions of cassava bagasse to reduced sugars were 71.66 and 85.05 % for INIAP 650 and INIAP 651 varieties. The best lactic acid concentrations were 27.62 and 33.48 g/L, obtained at pH 5.5 and agitation, for INIAP 650 and INIAP 651 varieties. Qualitative analysis conducted by FTIR spectrophotometry confirmed the presence of lactic acid in the reacted products. Lactic acid production from cassava bagasse starch could contribute to the Manabí and Esmeraldas provinces of Ecuador's economic development.

Review: Analysis and Benefit of Shells Content of Freshwater and Land Snails from Gastropods Class

Gastropods are the largest class of phylum mollusks. Members of this class include land snails, sea snails, freshwater snails, land snails, and limpet. In some countries, snails are often processed to be food. Along with the high consumption of snail meat, their shells' disposal rate, which can become waste on land and waters, is also high. This study aimed to determine the analysis method and benefits of the chemical compound content of several freshwater and land snail shells from the gastropod class. The method in this review was literary search from national and international journals. The result is known that the snail shell contains major chemical compounds, namely CaCO3, chitin, and chitosan. In addition, there are other minor compounds, such as minerals zinc, iron, copper, phosphorus, manganese, sodium, potassium, and proximate data. These compounds can be used as biomaterials that are useful for the world of health. Instruments for analysis of chitin and chitosan compounds can use FTIR spectrophotometry and mineral compounds of CaCO3 also; other minerals can use AAS and XRF.

Synthesis of Organo-Quartz from Lumajang Sea Sand Using Sodium Dodecyl Benzene Sulfonate (SDBS) Modificator for Adsorption of Fe3+

This study aims to determine the effect of sea sand modification with SDBS for adsorption of Fe3+. Sea sand was treated with 0.1 M HCl solution at 25oC. Organo-quartz was prepared at SDBS concentration of below, equal, and above the CMC value by shaking the mixture for 4 hours at 100 rpm. Characterization by FTIR spectrophotometry showed a change in the spectra pattern. The activation caused increasing of -OH silanol while modifications make them decrease. Characterization with SEM showed that the morphology of the sea sand was not uniform with irregular white chunks. The EDX results showed that the dominant elements were C (13.89% ± 10.86), O (40.48% ± 6.58), Si (16.51% ± 8.13), and Fe (11.68% ± 14.38). Adsorption was carried out using Fe3+ at 50 ppm. The Fe3+ analysis was conducted by AAS. The adsorption value by activated sea sand was 58.22% ± 7.23% whereas without treatment sea sand was 70.46% ± 5.54, and the modified sea sand was 53.24% ± 4.86. The lower adsorption is probably caused by the dissolved iron oxides in sea sand during activation.

Synthesis and Characterization of Hydrogel of Chitosan-Poly (N-Vinyl-2-Pirrolidone) (PVP)- Alginate for Ibuprofen Release

Hydrogels chitosan-poly-(N-vinyl-pyrrolidone)-alginate (Ch/PVP/Alg) have been synthesized with Ca2+, Zn2+ and formaldehyde as crosslinker. Hydrogels with ratio polymer 70:20:10 give a high swelling ratio and good network. The Ch/PVP/Alg/Ca2+ has 463.73% swelling ratio and 80.59% gel. Ch/PVP/Alg/Zn has 489.21% swelling ratio and 81.67% gel. Ch/PVP/Alg crosslinked with formaldehyde result 488.03% swelling ratio and 85.34% gel. Dissolution test of hydrogels in pH 1.2 releases ibuprofen less than 30%. Whereas in the pH 7.4, the release of ibuprofen by hydrogels are relatively high. Ch/PVP/Alg/Ca reach up to 34.63% in 30 minutes and 40.86% for Ch/PVP/Alg/Zn. Meanwhile Ch/PVP/Alg/CH2O can release 44.92% of ibuprofen in 30 minutes. The obtained hydrogel was characterized using infrared (FTIR) spectrophotometry, differential scanning calorimetry (DSC) and scanning electron microscopy (SEM).

Analysis of pork adulteration in the corned products using FTIR associated with chemometrics analysis

Meat-based foods such as beef corned became one of the targets of counterfeiting with pork because relatively cheaper. This becomes a serious problem for Muslims, especially in Indonesia. One method that can be used to detect fat was Fourier transform infrared (FTIR) spectrophotometry. The purpose of this study was to quantitatively analyze and a group of corned beef and corned pork using FTIR spectrophotometry combined with chemometrics. Reference samples corned pork-beef made of 7 various concentration (0%, 25%, 35%, 50%, 65%, 75%, 100%) and 6 product samples purchased in the Umbulharjo, Yogyakarta. Extraction was carried out by the soxhlet apparatus using n-hexane technical solvent for 4 – 5 hours at 69 – 70 °C. Fat analyzed using FTIR spectrophotometry for generating infrared spectral data then processed with Partial least square (PLS) chemometrics for quantitative analysis and Principal component analysis (PCA) for grouping. Results of quantitative analysis chemometrics PLS, selected areas fingerprints for analysis corned pork-beef was 1180 – 730 cm-1 with R2 0.9833; RMSEC 2.06%; RMSEP 1.65% and RMSECV 2.22%. The results of PCA showed groupings in different quadrants between corned pork 100% and corned beef 100%. Results showed that FTIR spectrophotometry combined with chemometrics can be used for quantitative analysis and grouping of pork corned and beef corned on the market but it can not identify pork in corned after choking process.

Effect of Incorporating Zirconia Powder into a Primer on the Resin Bond Strength to Zirconia Ceramic

The adhesion property of zirconia powder-incorporated primers was investigated in vitro with the aim of enhancing the resin bond strength to zirconia ceramic. A commercial zirconia primer was modified through the addition of 0 (control), 5, 10, 25, and 50 wt% of a zirconia powder (codes: ZP0, ZP5, ZP10, ZP25, and ZP50, respectively). Prior to primer modification, the powder was characterized via differential scanning calorimetry (DSC) and Fourier-transform infrared (FTIR) spectrophotometry. The surfaces of dental zirconia ceramic discs were air-abraded and treated with one of the five primers. One resin composite cylinder (diameter: 2.38 mm) was bonded on one specimen surface (n = 12/group). The bonded specimens were all stored for 24 h in distilled water at 37 °C and subjected to 5000 thermal cycles prior to shear bond strength (SBS) testing. The DSC and FTIR analyses confirmed that the zirconia powder contained an organic binder. The SBS test results showed that the groups could be arranged as follows, ZP25 > ZP10 > ZP5 > ZP0, i.e., in descending order of the mean value. The lowest SBS value was obtained for the ZP50 group. The results suggest that the incorporation of a zirconia powder into a primer represents a promising modification method for improving the resin bond strength to zirconia ceramic.

Physicochemical Study of Mangosteen (Garcinia mangostana L.) peel Extract as Coloring Agent in Tablet Formulation

The mangosteen peel (Garcinia mangostana L.) contains anthocyanin pigments, which has an important role in coloring. This study aims to determine the physicochemical properties of mangosteen peel extract (Garcinia mangostana L.) with two methods, which is an examination with UV-Vis and FTIR spectrophotometry. Then the extract was characterized, identified, and analyzed for its stability against temperature, pH, and applied as a coloring agent in the formulation of pharmaceutical preparations (tablets). The results showed that the yield of mangosteen peel extract obtained 13.0975 %, drying losses 5.2822 %, total ash content 14.488 %, acid insoluble ash content 0.684 %, water-soluble extract content 29.58 %, extract content dissolved in ethanol 37.78 %, total anthocyanin content with λmax = 367 nm which is = 9.58 mg / 100 g and with λmax = 289 nm which is = 52.43 mg / 100 g. In this study, the anthocyanin pigment content in mangosteen peel extract cannot be used as an alternative to natural dyes for pharmaceutical preparations (tablets).

A VALIDATED METHOD FOR QUANTITATION OF PREGABALIN AND METHYLCOBALAMIN USING DIFF USE REFLECTANCE FTIR SPECTROSCOPY IN BULK AND COMBINED TABLET DOSAGE FORM

A Simple, accurate precise and validated FTIR method was developed for the determination ofpregabalin (PRG) and methylcobalamin (MCA) in bulk as well as in tablet dosage form. The drug was analyzed by FTIR spectrophotometry with DRIFT sampling technique. wavenumber ranges 1660-1600 cm-1 (-COOH) and3400-3250 cm−1(-CONH2) were selected for pregabalin and methylcobalamin, respectively. The method was found to be linear over the range of PRG 1–6% w/w and MCA 0.2–1.2% w/w with good regression coefficient (r2) of PRG 0.9960 and MCA 0.9976. The percent recovery of pregabalin and methylcobalamin in marketed tablet dosage form was in the range of 98.25 – 99.00% and 98.62 – 99.60%, respectively. The LOD & LOQ were found 1.4003 & 4.2434 of PRG and 0.2027 & 0.6142 of MCA, respectively.The developed FTIR method was validated as per ICH guidelines and it can be used for the estimation of both drugs in combined dosage form.