scholarly journals Removal of Chromates and Sulphates by Mg/Fe LDH and Heterostructured LDH/Halloysite Materials: Efficiency, Selectivity, and Stability of Adsorbents in Single- and Multi-Element Systems

Materials ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1373 ◽  
Author(s):  
Jakub Matusik ◽  
Karolina Rybka
Keyword(s):  
Adsorption Properties ◽  
Small Extent ◽  
Minor Importance ◽  
Adsorption Efficiency ◽  
High Concentration ◽  
Lower Efficiency ◽  
Industrial Wastewaters ◽  
Column Adsorption ◽  
Double Hydroxides ◽  
Very High

Industrial wastewaters often contain mobile and toxic anions that cannot be removed by precipitation techniques and most known adsorbents. Layered double hydroxides (LDH) are excellent scavengers of anions; however, their use in real applications is of minor importance owing to their swelling behavior and high cost of production. The performed research shows the possibility of obtaining Mg/Fe LDH using natural magnesite. Moreover, heterostructured LDH/halloysite materials were synthesized. The adsorption efficiency of these materials was very high in both single- and multi-element systems, confirming the LDH selectivity. This was with the exception of wastewaters containing a high concentration of chlorides, which clearly hampered the removal of Cr(VI) and S(VI). The measurements indicated that LDH dissolution took place to a small extent (<10 wt%). The LDH/halloysite materials showed lower efficiency than the raw LDH; however, the clay presence has several benefits in terms of future applications: (i) it significantly reduces the pH, especially in contrast to the calcined LDH, which enables the reuse or safe disposal of purified water; (ii) it reduces swelling of the composite, which opens the possibility for applications in column adsorption; (iii) it induces dual adsorption properties through additional cation adsorption; and (iv) it substantially lowers the price of the adsorbent.

Ground water quality of selected areas of Punjab and Sind Provinces, Pakistan: Chemical and microbiological aspects

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Ionic Concentration ◽  
Chloride Ions ◽  
Potassium Ions ◽  
Ammonium Ions ◽  
High Concentration ◽  
Phosphate Ions ◽  
Sodium Magnesium ◽  
Very High ◽  
Microbiological Aspects

The assessment of groundwater is essential for the estimation of suitability of water for safe use. An attempt has been made to study the groundwater of selected areas of Punjab (Sheikhupura &amp; Sahiwal) and Sindh (Sindh, Jawar Dharki and Dharki), Pakistan. The results indicate that pH, color and odor were all within limits of WHO that is pH ranges 6.5–8.5, colorless and odorless, respectively. The high values of suspended solids were observed in the Sindh-1 and Dharki samples. Microbiologically only Sahiwal and Jawar Dharki were found fit for drinking purpose. Trace metals analysis of Sheikhupura-1 and Sindh-1 showed that values do not fall within limits of WHO for Iron. The ionic concentration analysis showed that high bicarbonate (HCO3-), ions are present in the samples of Sahiwal and Dharki; Sindh-1 and Jawar Dharki samples showed very high concentration for chloride ions, all samples were satisfactory level for sulphate (SO42-), sodium, magnesium and phosphate ions except samples of Sindh-1 and Jawar Dharki. High concentration of calcium and potassium ions was observed in samples of Sindh-1, while all other samples were found fit for drinking purposes in respect of nitrate, nitrite and ammonium ions. The high concentration of Fluoride was found only in Sheikhupura-2 samples.

The effect of heterotrophic yield on the assessment of the correction factor for anoxic growth

1996 ◽  
Vol 34 (5-6) ◽  
pp. 67-74 ◽  
Author(s):  
D. Orhon ◽  
S. Sözen ◽  
N. Artan
Keyword(s):  
Correction Factor ◽  
Domestic Sewage ◽  
Yield Coefficient ◽  
Heterotrophic Growth ◽  
Metabolic Processes ◽  
Anoxic Conditions ◽  
Industrial Wastewaters ◽  
Systems Modelling ◽  
Kinetics Of ◽  
Very High

For single-sludge denitrification systems, modelling of anoxic reactors currently uses the kinetics of aerobic heterotrophic growth together with a correction factor for anoxic conditions. This coefficient is computed on the basis of respirometric measurements with the assumption that the heterotrophic yield remains the same under aerobic and anoxic coditions. The paper provides the conceptual proof that the yield coefficient is significantly lower for the anoxic growth on the basis of the energetics of the related metabolic processes. This is used for the interpretation of the very high values for the correction factor experimentally determined for a number of industrial wastewaters. A default value for the anoxic heterotrophic yield coefficient is calculated for domestic sewage and compatible wastewaters and proposed for similar evaluations.

scholarly journals Near quantitative synthesis of urea macrocycles enabled by bulky N-substituent

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Yingfeng Yang ◽  
Hanze Ying ◽  
Zhixia Li ◽  
Jiang Wang ◽  
Yingying Chen ◽  
...  
Keyword(s):  
High Efficiency ◽  
Molecular Structures ◽  
High Yield ◽  
Kinetic Control ◽  
High Concentration ◽  
Weak Association ◽  
Quantitative Synthesis ◽  
Thermodynamic Stabilization ◽  
Discrete Structures ◽  
Very High

AbstractMacrocycles are unique molecular structures extensively used in the design of catalysts, therapeutics and supramolecular assemblies. Among all reactions reported to date, systems that can produce macrocycles in high yield under high reaction concentrations are rare. Here we report the use of dynamic hindered urea bond (HUB) for the construction of urea macrocycles with very high efficiency. Mixing of equal molar diisocyanate and hindered diamine leads to formation of macrocycles with discrete structures in nearly quantitative yields under high concentration of reactants. The bulky N-tert-butyl plays key roles to facilitate the formation of macrocycles, providing not only the kinetic control due to the formation of the cyclization-promoting cis C = O/tert-butyl conformation, but also possibly the thermodynamic stabilization of macrocycles with weak association interactions. The bulky N-tert-butyl can be readily removed by acid to eliminate the dynamicity of HUB and stabilize the macrocycle structures.

Small-volume vitrification and rapid warming yield high survivals of one-cell rat embryos in cryotubes

2021 ◽  
Author(s):  
Yasuyoshi Fukuda ◽  
Misako Higashiya ◽  
Takahiro Obata ◽  
Keita Basaki ◽  
Megumi Yano ◽  
...  
Keyword(s):  
Cooling Rate ◽  
Small Volume ◽  
Sucrose Solution ◽  
High Concentration ◽  
Rat Embryos ◽  
Low Concentrations ◽  
Intracellular Ice Formation ◽  
Intracellular Ice ◽  
Warming Rate ◽  
Very High

Abstract To cryopreserve cells, it is essential to avoid intracellular ice formation during cooling and warming. One way to achieve this is to convert the water inside the cells into a non-crystalline glass. It is currently believed that to accomplish this vitrification, the cells must be suspended in a very high concentration (20–40%) of a glass-inducing solute, and subsequently cooled very rapidly. Herein, we report that this belief is erroneous with respect to the vitrification of one-cell rat embryos. In the present study, one-cell rat embryos were vitrified with 5 μL of EFS10 (a mixture of 10% ethylene glycol, 27% Ficoll, and 0.45 M sucrose) in cryotubes at a moderate cooling rate, and warmed at various rates. Survival was assessed according to the ability of the cells to develop into blastocysts and to develop to term. When embryos were vitrified at a 2,613 °C/min cooling rate and thawed by adding 1 mL of sucrose solution (0.3 M, 50 °C) at a warming rate of 18,467 °C/min, 58.1 ± 3.5% of the EFS10-vitrified embryos developed into blastocysts, and 50.0 ± 4.7% developed to term. These rates were similar to those of non-treated intact embryos. Using a conventional cryotube, we achieved developmental capabilities in one-cell rat embryos by rapid warming that were comparable to those of intact embryos, even using low concentrations (10%) of cell-permeating cryoprotectant and at low cooling rates.

Diffusion In Insect Wing Muscle, The Most Active Tissue Known

1964 ◽  
Vol 41 (2) ◽  
pp. 229-256 ◽  
Author(s):  
TORKEL WEIS-FOGH
Keyword(s):  
Liquid Phase ◽  
Safety Factor ◽  
Metabolic Rates ◽  
High Concentration ◽  
Tracheal System ◽  
Insect Wing ◽  
Main Site ◽  
Normal Diffusion ◽  
Large Fibre ◽  
Very High

1. The tracheal system of insect wing muscle is so dense that between 10-1 and 10-3 of any cut area is occupied by air tubes. In most cases, air tube diffusion of O2 and CO2 through the muscle is therefore several thousand times quicker than diffusion in the liquid phase. 2. In large insects the primary tracheal supply must be strongly ventilated while diffusion is sufficient in the remaining part of the air tubes, even at the highest metabolic rates encountered in any insect. 3. The tracheoles represent the main site of exchange between the gaseous and the liquid phase while the tracheae are of little significance in this respect. The fibres cannot exceed about 20 µ in diameter unless the tracheoles indent the surface and become ‘internal’. 4. Muscular pumping of air and blood due to shortening is of little importance for the exchange of gases but of major importance for the supply with fuel for combustion. However, the large fibre diameters and the tidal nature of the pumping necessitates a very high concentration of fuel in the haemolymph. The high concentration of trehalose in insect blood is considered to be an essential adaptation to flapping flight. 5. The transport by diffusion of O2 and CO2 was followed in detail in a number of concrete examples in the gaseous as well as in the liquid phase. Within a safety factor of 2-3, the rate of transport was always found to be adequate. There is no reason to suggest other mechanisms than a simple, normal diffusion.

Vaporization and Ultra-Fine Particle Generation during the Plasma Spraying Process

1997 ◽  
Author(s):  
K.A. Gross ◽  
P. Fauchais ◽  
M. Vardelle ◽  
J. Tikkanen ◽  
J. Keskinen
Keyword(s):  
Fine Particles ◽  
High Concentration ◽  
Thermal Spray Process ◽  
Particle Generation ◽  
Spray Process ◽  
Ultra Fine Particle ◽  
Fast Cooling ◽  
Ultra Fine Particles ◽  
Plasma Spraying Process ◽  
Very High

Abstract The thermal spray process melts powder at very high temperatures and propels the molten material to the substrate to produce a coherent deposit. This heating produces a certain amount of vaporization of the feedstock. Upon exiting the plasma plume the fast cooling conditions lead to condensation of the vapor. An electrical low pressure impactor was used to monitor the concentration of ultra-fine particles at various radial and axial distances. Metal, namely iron powder, showed very high concentration levels which increase with distance. Ultra-fine particles from ZrO2-8Y2O3 reached a peak concentration at 6 cm. Use of an air barrier during spraying decreases the population of ultra-fine particles facilitating the production of a stronger coating.

scholarly journals Synthesis of [1,2-3H2]cholecalciferol and metabolism of [4-14C,1,2-3H2]- and [4-14C,1-3H]-cholecalciferol in rachitic rats and chicks

1971 ◽  
Vol 121 (4) ◽  
pp. 673-682 ◽  
Author(s):  
D. E. M. Lawson ◽  
B. Pelc ◽  
P. A. Bell ◽  
P. W. Wilson ◽  
E. Kodicek
Keyword(s):  
Vitamin D ◽  
Substance P ◽  
Rat Kidney ◽  
Intracellular Localization ◽  
Specific Radioactivity ◽  
Experimental Period ◽  
Time Interval ◽  
High Concentration ◽  
Very High ◽  
25 Hydroxycholecalciferol

[1,2-3H2]Cholecalciferol has been synthesized with a specific radioactivity of 508mCi/mmol by using tristriphenylphosphinerhodium chloride, the homogeneous hydrogen catalyst. With doses of 125ng (5i.u.) of [4-14C,1-3H2]cholecalciferol the tissue distribution in rachitic rats of cholecalciferol and its metabolites (25-hydroxycholecalciferol and peak P material) was similar to that found in chicken with 500ng doses of the double-labelled vitamin. The only exceptions were rat kidney, with a very high concentration of vitamin D, and rat blood, with a higher proportion of peak P material, containing a substance formed from vitamin D with the loss of hydrogen from C-1. Substance P formed from [4-14C,1,2-3H2]cholecalciferol retained 36% of 3H, the amount expected from its distribution between C-1 and C-2, the 3H at C-1 being lost. 25-Hydroxycholecalciferol does not seem to have any specific intracellular localization within the intestine of rachitic chicks. The 3H-deficient substance P was present in the intestine and bone 1h after a dose of vitamin D and 30min after 25-hydroxycholecalciferol. There was very little 25-hydroxycholecalciferol in intestine at any time-interval, but bone and blood continued to take it up over the 8h experimental period. It is suggested that the intestinal 3H-deficient substance P originates from outside this tissue. The polar metabolite found in blood and which has retained its 3H at C-1 is not a precursor of the intestinal 3H-deficient substance P.

Microphone High-Temperature Test System Development Based on PID Control

2014 ◽  
Vol 912-914 ◽  
pp. 1294-1298
Author(s):  
Li Yan Zhao
Keyword(s):  
High Temperature ◽  
System Development ◽  
Test System ◽  
Lower Efficiency ◽  
Temperature Function ◽  
Control Center ◽  
Marketing Application ◽  
High Temperature Operation ◽  
Very High ◽  
Temperature Test

With PID as its control center, this system overcomes the uncontrol of temperature, lower efficiency, difficult operation and other drawbacks occurring in precious microphone high-temperature test system. Characterized by excellent adaptability, automatic heating and constant temperature function, and simple operation, the high-temperature test system can meet the special requirements during microphone high temperature operation, evaluate the phase, frequency response, background noise and other product indexes in a high temperature ambient, and possess a very high marketing application value.

Sign in / Sign up

Export Citation Format

Share Document