scholarly journals In Situ Study on Fracture Behavior of Z-Pinned Carbon Fiber-Reinforced Aluminum Matrix Composite via Scanning Electron Microscope (SEM)

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 1941
Author(s):  
Yunhe Zhang ◽  
Sian Wang ◽  
Xiwang Zhao ◽  
Fanming Wang ◽  
Gaohui Wu
Keyword(s):  
Stainless Steel ◽  
Shear Strength ◽  
Electron Microscope ◽  
Carbon Fiber ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composite ◽  
Interlaminar Shear Strength ◽  
Interlaminar Shear ◽  
Scanning Electron

Inside a scanning electron microscope (SEM) chamber, we performed an in situ interlaminar shear test on a z-pinned carbon fiber-reinforced aluminum matrix composite (Cf/Al) fabricated by the pressure the infiltration method to understand its failure mechanism. Experiments show that introducing a stainless-steel z-pin increases the interlaminar shear strength of Cf/Al composite by 148%. The increase in interlaminar shear strength is attributed to the high strength of the stainless-steel z-pin and the strong bonding between the z-pin and the matrix. When the z-pin/matrix interface failed, the z-pin can still experience large shear deformation, thereby enhancing delamination resistance. The failure mechanism of composite includes interfacial debonding, aluminum plough, z-pin shear deformation, frictional sliding, and fracture. These results in this study will help us understand the interlaminar strengthening mechanism of z-pins in the delamination of metal matrix composites.

Surface and Composite Interface of Carbon Fiber Modified by Grafting of Diethanolamine

2009 ◽  
Vol 79-82 ◽  
pp. 497-500 ◽  
Author(s):  
Lei Chen ◽  
Zhi Wei Xu ◽  
Jia Lu Li ◽  
Xiao Qing Wu ◽  
Li Chen
Keyword(s):  
Shear Strength ◽  
Carbon Fiber ◽  
Functional Groups ◽  
Carbon Fibers ◽  
Irradiation Dose ◽  
Interlaminar Shear Strength ◽  
Epoxy Composites ◽  
Composite Interface ◽  
Γ Ray ◽  
Interlaminar Shear

The γ-ray co-irradiation method was employed to study the effect of diethanolamine modification on the surface of carbon fiber (CF) and the interfacial properties of CF/epoxy composites. Compared with the original carbon fiber, the surface of modified fibers became rougher. The amount of oxygen-containing functional groups was increased and the nitrogen element was detected after irradiation grafting. The interlaminar shear strength (ILSS) of composites reinforced by carbon fibers irradiated in diethanolamine solution was increased and then decreased as the irradiation dose increased. The ILSS of CF/epoxy composites was enhanced by 16.1% at 200kGy dose, compared with that of untreated one. The γ-ray irradiation grafting is expected to be a promising method for the industrialized modification of carbon fibers.

scholarly journals 3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties

Nanomaterials ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 894 ◽  
Author(s):  
Hongjiao Lin ◽  
Hejun Li ◽  
Qingliang Shen ◽  
Xiaohong Shi ◽  
Tao Feng ◽  
...  
Keyword(s):  
Shear Strength ◽  
Thermal Properties ◽  
Sol Gel ◽  
Interlaminar Shear Strength ◽  
Mechanical And Thermal Properties ◽  
Initial Oxidation ◽  
Sic Nanowires ◽  
Out Of Plane ◽  
Interlaminar Shear

An in-situ, catalyst-free method for synthesizing 3C-SiC ceramic nanowires (SiCNWs) inside carbon–carbon (C/C) composites was successfully achieved. Obtained samples in different stages were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman scattering spectroscopy. Results demonstrated that the combination of sol-gel impregnation and carbothermal reduction was an efficient method for in-situ SiCNW synthesis, inside C/C composites. Thermal properties and mechanical behaviors—including out-of-plane and in-plane compressive strengths, as well as interlaminar shear strength (ILLS) of SiCNW modified C/C composites—were investigated. By introducing SiCNWs, the initial oxidation temperature of C/C was increased remarkably. Meanwhile, out-of-plane and in-plane compressive strengths, as well as interlaminar shear strength (ILLS) of C/C composites were increased by 249.3%, 109.2%, and 190.0%, respectively. This significant improvement resulted from simultaneous reinforcement between the fiber/matrix (F/M) and matrix/matrix (M/M) interfaces, based on analysis of the fracture mechanism.

Microstructure optimizations for improving interlaminar shear strength and self-healing efficiency of spread carbon fiber/epoxy laminates containing microcapsules

2020 ◽  
Vol 55 (1) ◽  
pp. 27-38
Author(s):  
Yasuka Nassho ◽  
Kazuaki Sanada
Keyword(s):  
Shear Strength ◽  
Carbon Fiber ◽  
Optical Microscope ◽  
Interlaminar Shear Strength ◽  
Self Healing ◽  
Short Beam ◽  
Healing Efficiency ◽  
Beam Shear ◽  
Interlaminar Shear ◽  
Carbon Fiber Epoxy

The purpose of this study is to improve interlaminar shear strength and self-healing efficiency of spread carbon fiber (SCF)/epoxy (EP) laminates containing microcapsules. Microencapsulated healing agents were embedded within the laminates to impart a self-healing functionality. Self-healing was demonstrated on short beam shear specimens, and the healing efficiency was evaluated by strain energies of virgin and healed specimens. The effects of microcapsule concentration and diameter on apparent interlaminar shear strength and healing efficiency were discussed. Moreover, damaged areas after short beam shear tests were examined by an optical microscope to investigate the relation between the microstructure and the healing efficiency of the laminates. The results showed that the stiffness and the apparent interlaminar shear strength of the laminates increased as the microcapsule concentration and diameter decreased. However, the healing efficiency decreased with decreasing the microcapsule concentration and diameter.

scholarly journals Effect of Graphene Additive on Flexural and Interlaminar Shear Strength Properties of Carbon Fiber-Reinforced Polymer Composite

2020 ◽  
Vol 4 (4) ◽  
pp. 162
Author(s):  
Mohamed Ali Charfi ◽  
Ronan Mathieu ◽  
Jean-François Chatelain ◽  
Claudiane Ouellet-Plamondon ◽  
Gilbert Lebrun
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Carbon Fiber ◽  
Flexural Strength ◽  
Interlaminar Shear Strength ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Adhesion Properties ◽  
Reinforced Polymer ◽  
Interlaminar Shear

Composite materials are widely used in various manufacturing fields from aeronautic and aerospace industries to the automotive industry. This is due to their outstanding mechanical properties with respect to their light weight. However, some studies showed that the major flaws of these materials are located at the fiber/matrix interface. Therefore, enhancing matrix adhesion properties could significantly improve the overall material characteristics. This study aims to analyze the effect of graphene particles on the adhesion properties of carbon fiber-reinforced polymer (CFRP) through interlaminar shear strength (ILSS) and flexural testing. Seven modified epoxy resins were prepared with different graphene contents. The CFRP laminates were next manufactured using a method that guarantees a repeatable and consistent fiber volume fraction with a low porosity level. Short beam shear and flexural tests were performed to compare the effect of graphene on the mechanical properties of the different laminates. It was found that 0.25 wt.% of graphene filler enhanced the flexural strength by 5%, whilst the higher concentrations (2 and 3 wt.%) decreased the flexural strength by about 7%. Regarding the ILSS, samples with low concentrations (0.25 and 0.5 wt.%) demonstrated a decent increase. Meanwhile, 3 wt.% slightly decreases the ILSS.

Effect of cure pressure on microstructure and interlaminar shear strength properties of carbon fiber–reinforced plastics with microwave curing

2017 ◽  
Vol 30 (9) ◽  
pp. 1084-1093 ◽  
Author(s):  
Xiaoping Chen ◽  
Lihua Zhan ◽  
Yongwei Pu ◽  
Minghui Huang ◽  
Xintong Wu ◽  
...  
Keyword(s):  
Shear Strength ◽  
Carbon Fiber ◽  
Threshold Value ◽  
Interlaminar Shear Strength ◽  
Fiber Reinforced ◽  
Pressure Stage ◽  
Microwave Curing ◽  
Carbon Fiber Reinforced ◽  
Interlaminar Shear ◽  
Curing Pressure

Under a given microwave curing process, different curing pressures were applied to the carbon fiber–reinforced epoxy resin pre-impregnated laminates. Nondestructive testing and microscopic analysis were used to assess the effect of curing pressure on the interlaminar shear strength (ILSS) of the carbon fiber–reinforced plastic (CFRP) laminates. Results showed that in the low curing pressure stage (below 0.4 MPa), the porosity and ILSS of the components were reduced substantially as the curing pressure increased. In the high curing pressure stage (above 0.4 MPa), the ILSS only increased by 2.2% or so and the porosity and ILSS were no longer sensitive to the pressure, which indicated there was a threshold value (0.4 MPa) of mechanical property for forming the CFRP by the microwave curing. Above the threshold value, the curing pressure should be sufficient to allow the volatile gases to dissolve in the resin, thereby eliminating the generation of voids fundamentally, and the effect of curing pressure on the quality of composites was becoming small. These results could give process engineers some basic references for eliminating the voids in the CFRP component, so that they could reach a balance between preserving the mechanical properties and reducing the curing pressure in a cost-effective way.

Sign in / Sign up

Export Citation Format

Share Document