scholarly journals Silicalite-1 Layers as a Biocompatible Nano- and Micro-Structured Coating: An In Vitro Study on MG-63 Cells

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3583 ◽  
Author(s):  
Martina Doubkova ◽  
Ivana Nemcakova ◽  
Ivan Jirka ◽  
Vitezslav Brezina ◽  
Lucie Bacakova
Keyword(s):  
Photoelectron Spectroscopy ◽  
Chemical Properties ◽  
In Vitro Study ◽  
Ammonium Hydroxide ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Orthopaedic Implants ◽  
Water Contact ◽  
Physico Chemical

Silicalite-1 is a purely siliceous form of zeolite, which does not contain potentially harmful aluminum in its structure as opposed to ZSM-5 aluminosilicate types of zeolite. This paper reports on a study of a silicalite-1 film, deposited on a silicon Si(100) substrate, as a potential anti-corrosive and biocompatible coating for orthopaedic implants. Silicalite-1 film was prepared in situ on the surface of Si(100) wafers using a reaction mixture of tetrapropyl-ammonium hydroxide (TPAOH), tetraethyl-orthosilicate (TEOS), and diH2O. The physico-chemical properties of the obtained surface were characterized by means of X-ray photoelectron spectroscopy, water contact angle measurement, atomic force microscopy, and scanning electron microscopy. The biocompatibility was assessed by interaction with the MG-63 cell line (human osteosarcoma) in terms of cell adhesion, morphology, proliferation, and viability. The synthesized silicalite-1 film consisted of two layers (b- and a, b-oriented crystals) creating a combination of micro- and nano-scale surface morphology suitable for cell growth. Despite its hydrophobicity, the silicalite-1 film increased the number of initially adhered human osteoblast-like MG-63 cells and the proliferation rate of these cells. The silicalite-1 film also improved the cell viability in comparison with the reference Si(100) substrate. It is therefore a promising candidate for coating of orthopaedic implants.

Fabrication and characterization of customized tubular scaffolds for tracheal tissue engineering by using solvent based 3D printing on predefined template

2021 ◽  
Vol 27 (2) ◽  
pp. 421-428
Author(s):  
Rudranarayan Kandi ◽  
Pulak Mohan Pandey ◽  
Misba Majood ◽  
Sujata Mohanty
Keyword(s):  
Tissue Engineering ◽  
Cell Adhesion ◽  
3D Printing ◽  
Chemical Properties ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
In Vitro Cytotoxicity ◽  
Content Type ◽  
Tracheal Tissue

Purpose This paper aims to discuss the successful fabrication of customized tubular scaffolds for tracheal tissue engineering with a novel route using solvent-based extrusion 3D printing. Design/methodology/approach The manufacturing approach involved extrusion of polymeric ink over a rotating predefined pattern to construct customized tubular structure of polycaprolactone (PCL) and polyurethane (PU). Dimensional deviation in thickness of scaffolds were calculated for various layer thicknesses of 3D printing. Physical and chemical properties of scaffolds were investigated by scanning electron microscope (SEM), contact angle measurement, Fourier Transform Infrared Spectroscopy (FTIR) and X-ray diffraction (XRD). Mechanical characterizations were performed, and the results were compared to the reported properties of human native trachea from previous reports. Additionally, in vitro cytotoxicity of the fabricated scaffolds was studied in terms of cell proliferation, cell adhesion and hemagglutination assay. Findings The developed fabrication route was flexible and accurate by printing customized tubular scaffolds of various scales. Physiochemical results showed good miscibility of PCL/PU blend, and decrease in crystalline nature of blend with the addition of PU. Preliminary mechanical assessments illustrated comparable mechanical properties with the native human trachea. Longitudinal compression test reported outstanding strength and flexibility to maintain an unobstructed lumen, necessary for the patency. Furthermore, the scaffolds were found to be biocompatible to promote cell adhesion and proliferation from the in vitro cytotoxicity results. Practical implications The attempt can potentially meet the demand for flexible tubular scaffolds that ease the concerns such as availability of suitable organ donors. Originality/value 3D printing over accurate predefined templates to fabricate customized grafts gives novelty to the present method. Various customized scaffolds were compared with conventional cylindrical scaffold in terms of flexibility.

scholarly journals High Loading Capacity and Wear Resistance of Graphene Oxide/Organic Molecule Assembled Multilayer Film

2021 ◽  
Vol 9 ◽  
Author(s):  
Li Chen ◽  
Gang Wu ◽  
Yin Huang ◽  
Changning Bai ◽  
Yuanlie Yu ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Multilayer Films ◽  
Thickness Measurement ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Film Structure ◽  
Silicon Substrates ◽  
Water Contact ◽  
Macro Scale

Taking advantage of the strong charge interactions between negatively charged graphene oxide (GO) sheets and positively charged poly(diallyldimethylammonium chloride) (PDDA), self-assembled multilayer films of (GO/PDDA)n were created on hydroxylated silicon substrates by alternating electrostatic adsorption of GO and PDDA. The formation and structure of the films were analyzed by means of water contact angle measurement, thickness measurement, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). Meanwhile, tribological behaviors in micro- and macro- scale were investigated by AFM and a ball-on-plate tribometer, respectively. The results showed that (GO/PDDA)n multilayer films exhibited excellent friction-reducing and anti-wear abilities in both micro- and macro-scale, which was ascribed to the special structure in (GO/PDDA)n multilayer films, namely, a well-stacked GO–GO layered structure and an elastic 3D crystal stack in whole. Such a film structure is suitable for design molecular lubricants for MEMS and other microdevices.

scholarly journals IN VITRO STUDY OF PHYSICO-CHEMICAL PROPERTIES OF THE «BALANCED SALT SOLUTION − H2O» SYSTEM WITH THE PURPOSE OF DEVELOPMENT OF TREATMENT, REHABILITATION AND PREVENTIVE MEASURES IN OPHTHALMOLOGY

2021 ◽  
Author(s):  
O. Kofanova ◽  
К. Tkachuk ◽  
O. Kofanov ◽  
M. Saveliev ◽  
O. Tverda ◽  
...  
Keyword(s):  
Chemical Analysis ◽  
Mathematical Models ◽  
Salt Solution ◽  
Dynamic Viscosity ◽  
Preventive Measures ◽  
Chemical Properties ◽  
In Vitro Study ◽  
Vitro Study ◽  
Physico Chemical

The research is devoted to the in vitro study of the behavior of the model system «irrigation balanced salt solution BSS − H2O» in order to further develop treatment, rehabilitation and prevention measures for patients with ophthalmic diseases. The aim of the investigation is the experimental determination and analysis of physico-chemical properties of irrigated balanced salt solution, the study of its behavior in the aquatic environment to model changes in the characteristics of intraocular fluid and further development of rehabilitation and preventive measures for ophthalmic patients. Materials and Methods. The study used methods of physico-chemical analysis, in particular, densimetry and viscosimetry of model systems containing BSS for intraocular use and double-distilled water in different volume ratios. The density of the system was determined pycnometrically (20.00 0С ± 0.05 0С; 101.3 kPa); the correction for weight loss of bodies in the air has been taken into account. Viscosity was measured under the same conditions with an Ostwald viscometer. Statistical analysis and evaluation of the reliability of the results were performed using such software products as MS Excel 2007, Google Spreadsheets, SPSS Statistics. Results. Approximate mathematical models of the dependences of density and kinematic and dynamic viscosity on the composition of the multicomponent system «BSS – H2O» were obtained with quite high coefficients of determination. Statistical significance and adequacy of model selection were tested by Student's criterion at a significance level of 5 %. To develop therapeutic, prophylactic and rehabilitation measures, mathematical models of kinematic and dynamic viscosity dependences on the density of the «BSS – H2O» system, measured under the same conditions, were built. The models also have high coefficients of determination. Conclusion. The in vitro physico-chemical analysis of the system «BSS – H2O», as well as the obtained approximate mathematical models can be used to predict possible changes in the characteristics of irrigated balanced salt solution during its long stay in the patient's eye.

Effect of Plasma-Induced Polymerization on Contact Angle of Paper

2011 ◽  
Vol 396-398 ◽  
pp. 1619-1623
Author(s):  
Zhao Ping Song ◽  
Jun Rong Li ◽  
Hui Ning Xiao
Keyword(s):  
Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Polymer Grafting ◽  
Hydrophobic Property ◽  
Cellulose Fibres ◽  
Water Contact ◽  
X Ray ◽  
Factors Associated

Hydrophobic modification of cellulose fibres was conducted by plasma-induced polymer grafting in an attempt to increase the hydrophobicity of paper. Two hydrophobic monomers, i.e., butyl acrylate (BA) and 2-ethylhexyl acrylate (2-EHA) were grafted on cellulose fibres, induced by atmospheric cold plasma. Various influencing factors associated with the plasma-induced grafting were investigated, including the contact time and reaction temperature with monomers, and the dosage of monomers. Contact-angle measurement, infrared spectrum (IR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM) were used to ascertain the occurrence of the grafting. The results showed that the hydrophobic property of the modified paper sheet was improved significantly after the plasma-induced grafting. The water contact angle on the surface of the paper reached up to higher than125°.

Bio-Inspired In Situ Fabrication of 11-Mercaptoundecanoic Acid Coating on Stainless Steel 304 for Corrosion Protection

2018 ◽  
Vol 913 ◽  
pp. 375-383
Author(s):  
Shuo Tian Sun ◽  
Yan Hua Lei ◽  
Tao Liu ◽  
Run Hua Fan ◽  
Shi Bin Sun
Keyword(s):  
Corrosion Protection ◽  
Photoelectron Spectroscopy ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Film Structure ◽  
Covalent Attachment ◽  
Water Contact ◽  
In Situ Fabrication ◽  
Corrosion Resistance Property

Bio-inspired in situ fabrication of 11-Mercaptoundecanoic Acid was proposed to prepare self-assembled coating of alkanethiolates on SS304 alloy. In this method, the SS304 was coated with a reactive biopolymer – Polydopamine (PDA) by dispersing them in a dopamine solution and mildly stirring at room temperature with subsequent covalent attachment of 11-Mercaptoundecanoic Acid molecules through the interaction between thiol groups and Polydopamine. The formation and surface structure of the coating were characterized by water contact angle measurement, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The electronic properties of such obtained functional film were studied by potentiodynamic polarization curve and EIS in 3.5% NaCl solution. Corrosion protection efficiency near 99 % was evaluated, and the excellent corrosion resistance property could be ascribed to the compact film structure and good seawater stability for modified SS304 surface, especially in limiting the infiltration of Cl-.

scholarly journals Development of Nanoporous AAO Membrane for Nano Filtration Using the Acoustophoresis Method

Sensors ◽  
2020 ◽  
Vol 20 (14) ◽  
pp. 3833
Author(s):  
Yatinkumar Patel ◽  
Giedrius Janusas ◽  
Arvydas Palevicius ◽  
Andrius Vilkauskas
Keyword(s):  
Acoustic Waves ◽  
Chemical Properties ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Nanoporous Structure ◽  
Destructive Testing ◽  
Water Contact ◽  
Force Microscopy ◽  
Interpore Distance ◽  
Nanoporous Surface

A concept of a nanoporous anodic aluminum oxide (AAO) membrane as a vibro-active micro/nano-filter in a micro hydro mechanical system for the filtration, separation, and manipulation of bioparticles is reported in this paper. For the fabrication of a nanoporous AAO, a two-step mild anodization (MA) and hard anodization (HA) technique was used. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used to analyze the surface morphology of nanoporous AAO. A nanoporous structure with a pore diameter in the range of 50–90 nm, an interpore distance of 110 nm, and an oxide layer thickness of 0.12 mm with 60.72% porosity was obtained. Fourier-transform infrared spectroscopy (FTIR) and energy-dispersive X-ray spectroscopy (EDS) were employed to evaluate AAO chemical properties. The obtained results showed that the AAO structure is of hexagonal symmetry and showed where Al2O3 is dominant. The hydrophobic properties of the nanoporous surface were characterized by water contact angle measurement. It was observed that the surface of the nanoporous AAO membrane is hydrophilic. Furthermore, to determine whether a nanomembrane could function as a vibro-active nano filter, a numerical simulation was performed using COMSOL Multiphysics 5.4 (COMSOL Inc, Stockholm, Sweden). Here, a membrane was excited at a frequency range of 0–100 kHz for surface acoustics wave (SAW) distribution on the surface of the nanoporous AAO using a PZT 5H cylinder (Piezo Hannas, Wuhan, China). The SAW, standing acoustic waves, and travelling acoustic waves of different wavelengths were excited to the fabricated AAO membrane and the results were compared with experimental ones, obtained from non-destructive testing method 3D scanning vibrometer (PSV-500-3D-HV, Polytec GmbH, Waldbronn, Germany) and holographic interferometry system (PRISM, Hy-Tech Forming Systems (USA), Phoenix, AZ, USA). Finally, a simulation of a single nanotube was performed to analyze the acoustic pressure distribution and time, needed to center nanoparticles in the nanotube.

scholarly journals Simple method of fabrication of hydrophobic coatings for polyurethanes

2011 ◽  
Vol 9 (6) ◽  
pp. 1039-1045 ◽  
Author(s):  
Beata Butruk ◽  
Paulina Ziętek ◽  
Tomasz Ciach
Keyword(s):  
Contact Angle ◽  
High Efficiency ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Acoustic Microscopy ◽  
Water Contact ◽  
Simple Method ◽  
Hydrophobic Coatings ◽  
Grafting Reaction

AbstractThe aim of this study was to develop a method of manufacturing versatile hydrophobic coatings for polymers. Authors present a simple technique of polyurethane (PU) surface modification with covalently attached silicones (PDMS) or fluorocarbons (PFC). Diisocyanates were applied as linker molecules. The obtained coatings were characterized using spectroscopic analysis (FTIR), scanning acoustic microscopy (SAM) and water contact angle measurements. FTIR analysis revealed high efficiency of grafting reaction. The results of contact angle measurement indicated significant increase of hydrophobicity — from 66° (unmodified PU) to 113° (PU grafted with PDMS) and 118° (PU grafted with PFC). Acoustic microscopy analysis confirmed satisfactory homogeneity and smoothness of the fabricated layers. In vitro cell tests revealed non-adherent properties of the surfaces. Both, MTT assay and fluorescence staining confirmed non-cytotoxicity of the coatings, which makes them potential candidates for use in biomedical applications.

Fabrication of superhydrophobic cotton fabrics through wrapping silica with plasma-induced grafting polymerization

2017 ◽  
Vol 89 (3) ◽  
pp. 401-410 ◽  
Author(s):  
Yongqiang Li ◽  
Chao Zou ◽  
Jianzhong Shao ◽  
Ya’nan Li
Keyword(s):  
Contact Angle ◽  
Water Contact Angle ◽  
Cotton Fabric ◽  
Photoelectron Spectroscopy ◽  
Contact Angle Measurement ◽  
Cotton Fabrics ◽  
Angle Measurement ◽  
Water Contact ◽  
Washing Durability ◽  
Before And After

Cotton fabric is commonly used in daily life, but it is easily wetted and contaminated by liquid. Herein, we present a simple and environmentally friendly plasma technology for hydrophobic modification of cotton fabric. In order to endow superhydrophobicity to cotton fabric, helium plasma inducing graft polymerization of 1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane (D4Vi) was utilized to wrap SiO2 particles on cotton fabrics. Cotton fabrics were successively dipped in silica sol and D4Vi, then treated by plasma. Cotton fabrics before and after modification were characterized by using field emission scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and water contact angle measurement. The experimental results showed that the cotton-SiO2-D4Vi consisted of nanoscale SiO2 protrusions and low-surface-energy film polymerized by D4Vi. In addition, the one wrapped SiO2 of 161 nm presented excellent hydrophobicity, washing durability, and repellency toward different types of liquids with a water contact angle of 152°.

scholarly journals Biological efficacy of perpendicular type-I collagen protruded from TiO2-nanotubes

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Chia-Yu Chen ◽  
David. M. Kim ◽  
Cliff Lee ◽  
John Da Silva ◽  
Shigemi Nagai ◽  
...  
Keyword(s):  
Platelet Activation ◽  
Type I Collagen ◽  
Cell Attachment ◽  
In Vitro Study ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Type I ◽  
Nih3t3 Cells ◽  
Biological Efficacy

AbstractThe aim of this study was to evaluate the biological efficacy of a unique perpendicular protrusion of type-I collagen (Col-I) from TiO2 nanotubes (NT-EPF surface). We hypothesized that the NT-EPF surface would play bifunctional roles in stimulating platelet-mediated fibroblast recruitment and anchoring fibroblast-derived Col-I to form a perpendicular collagen assembly, mimicking the connective tissue attachment around natural teeth for the long-term maintenance of dental implants. Ti surface modification was accomplished in two steps. First, TiO2 nanotubes (NT) array was fabricated via anodization. Diameters and depths of NTs were controlled by applied voltage and duration. Subsequently, an electrophoretic fusion (EPF) method was applied to fuse Col-I into nanotube arrays in a perpendicular fashion. Surface wettability was assessed by contact angle measurement. The bioactivity of modified TiO2 surfaces was evaluated in terms of NIH3T3 fibroblast attachment, platelet activation, and collagen extension. Early attachment, aggregation, and activation of platelets as well as release of platelet-related growth factors were demonstrated on NT-EPF surfaces. Platelet-mediated NIH3T3 cells migration toward NT-EPF was significantly increased and the attached cells showed a typical fibrous morphology with elongated spindle shape. A direct linkage between pseudopod-like processes of fibroblasts to NT-EPF surfaces was observed. Furthermore, the engineered EPF collagen protrusion linked with cell-derived collagen in a perpendicular fashion. Within the limitation of this in vitro study, the TiO2 nanotube with perpendicular Col-I surface (NT-EPF) promoted better cell attachment, induced a strong platelet activation which suggested the ability to create a more robust soft tissue seal.

scholarly journals Fabrication and characterization of superhydrophobic and superlipophilic silica nanofibers mats with excellent heat resistance

2016 ◽  
Vol 52 (1) ◽  
pp. 87-92 ◽  
Author(s):  
S. Gao ◽  
H. Watanabe ◽  
K. Nakane ◽  
K. Zhao
Keyword(s):  
Contact Angle ◽  
Heat Resistance ◽  
Photoelectron Spectroscopy ◽  
Treatment Time ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
High Specific Surface Area ◽  
Water Contact ◽  
Water Filter ◽  
Silica Nanofibers

A kind of silica nanofibers (SNF) mats with superhydrophobicity and superlipophilicity as well as excellent heat resistance, had been prepared by modifying of 1, 1, 1, 3, 3, 3-hexamethyldisilazane on electrospun SNF mats. The effects of heat treatment time on properties of modified SNF mats were investigated by scanning electron microscopy, nitrogen absorption analysis, X-ray photoelectron spectroscopy, and contact angle measurement. With high specific surface area 240.1 m2/g, the optimal modified SNF mat approached water contact angle (WCA) 153.2? and fuel contact angle (FCA) 0?, furthermore, even after annealing by 450?C in air for 1h , WCA remained at 135.5? and FCA kept at 3.8?, which opened a new way to improve heat resistance of fuel-water filter paper.

Sign in / Sign up

Export Citation Format

Share Document