scholarly journals Preparation and Characterization of Novel Mixed Periodic Mesoporous Organosilica Nanoparticles

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1569
Author(s):  
Hao Li ◽  
Laurence Raehm ◽  
Clarence Charnay ◽  
Jean-Olivier Durand ◽  
Roser Pleixats
Keyword(s):  
Cetyltrimethylammonium Bromide ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Periodic Mesoporous Organosilica ◽  
X Ray ◽  
Surface Areas ◽  
Mesoporous Organosilica ◽  
Transmission Electron ◽  
Cp Mas Nmr

We report herein the preparation of mixed periodic mesoporous organosilica nanoparticles (E-Pn 75/25 and 90/10 PMO NPs) by sol-gel co-condensation of E-1,2-bis(triethoxysilyl)ethylene ((E)-BTSE or E) with previously synthesized disilylated tert-butyl 3,5-dialkoxybenzoates bearing either sulfide (precursor P1) or carbamate (precursor P2) functionalities in the linker. The syntheses were performed with cetyltrimethylammonium bromide (CTAB) as template in the presence of sodium hydroxide in water at 80 °C. The nanomaterials have been characterized by Transmission Electron Microscopy (TEM), nitrogen-sorption measurements (BET), Dynamic Light Scattering (DLS), zeta-potential, Thermogravimetric Analysis (TGA), FTIR, 13C CP MAS NMR and small angle X-ray diffraction (p-XRD). All the nanomaterials were obtained as mesoporous rodlike-shape nanoparticles. Remarkably, E-Pn 90/10 PMO NPs presented high specific surface areas ranging from 700 to 970 m2g−1, comparable or even higher than pure E PMO nanorods. Moreover, XRD analyses showed an organized porosity for E-P1 90/10 PMO NPs typical for a hexagonal 2D symmetry. The other materials showed a worm-like mesoporosity.

scholarly journals Magnetically Separable Chiral Periodic Mesoporous Organosilica Nanoparticles

2020 ◽  
Vol 10 (17) ◽  
pp. 5960
Author(s):  
Suheir Omar ◽  
Raed Abu-Reziq
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Periodic Mesoporous Organosilica ◽  
X Ray ◽  
Mesoporous Organosilica ◽  
Transmission Electron ◽  
Sol Gel Process ◽  
First Time

We describe, for the first time, a successful strategy for synthesizing chiral periodic mesoporous organosilica nanoparticles (PMO NPs). The chiral PMO nanoparticles were synthesized in a sol–gel process under mild conditions; their preparation was mediated by hydrolysis and condensation of chiral-bridged organo-alkoxysilane precursor compounds, (OR‘)3Si-R-Si(OR‘)3, in the presence of cetyltrimethylammonium bromide (CTAB) surfactant. The resulting nanoparticles were composed merely from a chiral- bridged organo-alkoxysilane monomer. These systems were prepared by applying different surfactants and ligands that finally afforded monodispersed chiral PMO NPs consisting of 100% bridged-organosilane precursor. In addition, the major advancement that was achieved here was, for the first time, success in preparing magnetic chiral PMO NPs. These nanoparticles were synthesized by the co-polymerization of 1,1′-((1R,2R)-1,2-diphenylethane-1,2-diyl)bis(3-(3-(triethoxysilyl) propyl) urea) chiral monomer by an oil in water (o/w) emulsion process, to afford magnetic chiral PMO NPs with magnetite NPs in their cores. The obtained materials were characterized with high-resolution scanning electron microscopy (HR-SEM), high-resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray (EDX) spectroscopy, powder X-ray diffraction (XRD), solid-state NMR analysis, circular dichroism (CD) analysis, and nitrogen sorption analysis (N2-BET).

Sol-Gel Synthesis and Characterization of Nanocrystalline Bi4Ti3O12 Powders

2014 ◽  
Vol 997 ◽  
pp. 359-362 ◽  
Author(s):  
Chun Hong Ma ◽  
Xue Lin ◽  
Liang Wang ◽  
Yong Sheng Yan
Keyword(s):  
Phase Inversion ◽  
Bismuth Titanate ◽  
Sol Gel ◽  
Tetrabutyl Titanate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Sol Gel Synthesis ◽  
Source Materials

Nanocrystalline bismuth titanate (Bi4Ti3O12; BTO) powders were successfully prepared by the sol-gel method, using bismuth nitrate (Bi(NO3)3·5H2O) and tetrabutyl titanate (Ti(OC4H9)4) as source materials, acetic anhydride and ethanediol as solvents. The thermal decomposition and phase inversion process of the gel precursors were studied by using differential thermal analysis (DTA). The crystal structures and microstructures of BTO powders were investigated by using x-ray diffraction (XRD), and transmission electron microscope (TEM). The crystallization of amorphous bismuth titanate has been discussed. The effect of sintering temperature on the structure and morphology of BTO was investigated. At 644 oC and above, BTO powder undergoes a phase transformation from tetragonal to orthorhombic. At 900 oC, the purified orthorhombic BTO nanocrystals were obtained.

Sol-gel derived Ba(Mg1/3Ta2/3)O3 thin films: Preparation and structure

1997 ◽  
Vol 12 (3) ◽  
pp. 596-599 ◽  
Author(s):  
Ji Zhou ◽  
Qing-Xin Su ◽  
K. M. Moulding ◽  
D. J. Barber
Keyword(s):  
Thin Films ◽  
Annealing Temperature ◽  
Volume Fraction ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Sol Gel Process ◽  
Small Grains

Ba(Mg1/3Ta2/3)O3 thin films were prepared by a sol-gel process involving the reaction of barium isopropoxide, tantalum ethoxide, and magnesium acetate in 2-methoxyethanol and subsequently hydrolysis, spin-coating, and heat treatment. Transmission electron microscopy, x-ray diffraction, and Raman spectroscopy were used for the characterization of the thin films. It was shown that the thin films tend to crystallize with small grains sized below 100 nm. Crystalline phase with cubic (disordered) perovskite structure was formed in the samples annealed at a very low temperature (below 500 °C), and well-crystallized thin films were obtained at 700 °C. Although disordered perovskite is dominant in the thin films annealed below 1000 °C, a low volume fraction of 1 : 2 ordering domains was found in the samples and grows with an increase of annealing temperature.

Synthesis and Characterization of Lamellar Nanostructured Yttrium Films Using Lyotropic Liquid Crystalline Templates

2011 ◽  
Vol 399-401 ◽  
pp. 1915-1918
Author(s):  
Rui Jie Guo ◽  
Xiao Juan Sha ◽  
Lei Lei Cao
Keyword(s):  
Electron Microscope ◽  
Liquid Crystalline ◽  
Electroless Deposition ◽  
Electronic Materials ◽  
X Ray Diffraction ◽  
Regular Array ◽  
X Ray ◽  
Surface Areas ◽  
Transmission Electron

The lamellar nanostructured yttrium films on α-Al2O3 substrates were successfully synthesized by electroless deposition using the lyotropic liquid crystalline templating strategy. The reaction of hydrazine hydrate and Y3+ dissolved within the aqueous domains of the lyotropic liquid crystalline phase produced the nanostructured yttrium films. The low-angle X-ray diffraction (XRD), transmission electron microscope (TEM) and scanning electron microscope (SEM) indicated that the as-resulted films possessed lamellar regular array of nanochannels with periodicity of 6 nm. With well-defined nanochannels and higher surface areas, the nanostructured films may find applications in the field of electronic materials.

Synthesis and Characterization of MgPSZ-PMMA Composite by Sol-Gel Modification and Direct Foaming Technique Using Egg Whites

2016 ◽  
Vol 720 ◽  
pp. 290-295
Author(s):  
Veni Takarini ◽  
Alfend Rudyawan ◽  
Andri Hardiansyah ◽  
Rifki Septawendar ◽  
Niki Prastomo ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Crystal Size ◽  
Sol Gel ◽  
Porous Structures ◽  
X Ray Diffraction ◽  
X Ray ◽  
Direct Foaming ◽  
Transmission Electron ◽  
Direct Foaming Method

This study prepared Magnesium-Partially Stabilized Zirconia (Mg-PSZ) filler synthesis and direct foaming technique using egg whites, and impregnated by PMMA. The results were evaluated systematically by X-ray diffraction (XRD), Scanning Electron Microscope (SEM), and Transmission Electron Microscope (TEM). XRD results denote that the powder sample of MgPSZ was successfully formed with various crystal size of tetragonal and monoclinic phase. SEM and TEM observations revealed that nanoparticles MgPSZ were in spherical and long rounded shapes. Furthermore, SEM observation revealed that the direct foaming method were also successful in the formation of porous structures which favourable for impregnation process by PMMA. The use of egg whites as a polymer precursor in both methods demonstrates that porous specimens contained nanosized, predominantly tetragonal, Mg-PSZ powders were successfully synthesized. This shall yield an interesting prospect towards cheap, reliable, and biocompatible product to resemble the modulus elasticity of dentin.

Characterization of Y/TiO2 Nanoparticles and their Reactivity for CO2 Photoreduction

2011 ◽  
Vol 55-57 ◽  
pp. 1506-1510 ◽  
Author(s):  
Jing Wei ◽  
Xin Tan ◽  
Tao Yu ◽  
Lin Zhao
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Chemical Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Illumination ◽  
Transmission Electron ◽  
And Chemical Properties

A series of Y/TiO2nanoparticles (NPs) were synthesized via sol-gel method. The crystal structures, morphologies and chemical properties were characterized using X-ray diffraction (XRD), high resolution transmission electron microscopy (HR-TEM) and X-ray photoelectron spectroscopy (XPS). We investigated the effects of different doping amounts of Y on the reaction of CO2photoreduction. The results shown that 0.1 wt.%Y/TiO2(0.1YT) performed the highest photocatalytic activity, which yielded 384.62 µmol/g∙cat. formaldehyde after 6 h of UV illumination.

scholarly journals Fabrikasi Nanotubes Titanium Dioksida (TiO2) Menggunakan Metode Hidrotermal

2017 ◽  
Vol 3 (1) ◽  
pp. 20-26
Author(s):  
Atik Setyani ◽  
Emas Agus Prastyo Wibowo
Keyword(s):  
Tio2 Nanoparticles ◽  
Tio2 Nanotubes ◽  
Crystal Size ◽  
High Surface ◽  
Sol Gel ◽  
High Surface Area ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

Nanotubes received great attention because it has a high surface area. In this study, TiO2 nanotubes fabricated via hydrothermal method from  synthesis of TiO2 nanoparticles via sol-gel method. Catalysts that have been synthesized later in the characterization by X-Ray Diffraction (XRD) to obtain the crystal size and crystallinity. Crystal size of TiO2 nanoparticles at a temperature of 450C is 13.78 nm. Then characterized by Transmission Electron Microscopy (TEM) to look at the formation of nanotubes. Characterization of TiO2 nanotubes with TEM shows that the structure of the tubes had already been formed TNTs although the growth has not been perfect. It can be seen from the structure TNTs who tend to be short and yet so irregular.DOI: http://dx.doi.org/10.15408/jkv.v0i0.5036  

scholarly journals Fabrication and characterization of ferrites (Mg and Mn) based on FTIR, XRD, SEM and TEM

2014 ◽  
Vol 8 (3) ◽  
Author(s):  
Tang Ing Hua ◽  
Rita Sundari
Keyword(s):  
Electron Microscope ◽  
Volume Expansion ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Semiconducting Materials ◽  
Thermal Agitation ◽  
X Ray ◽  
Transmission Electron ◽  
Fabrication And Characterization

This study has encountered with the fabrication of ferrites (Mg and Mn) using citric acid as anionic surfactant in sol-gel method followed by calcinations at varied temperatures (300, 600, 800°C) for 2h, respectively. The fabricated ferrites have been characterized by FTIR (Fourier Transform Infrared Spectroscopy), XRD (X-Ray Diffraction), SEM (Scanning Electron Microscope) and TEM (Transmission Electron Microscope). The FTIR spectrum for MnFeO3 shows that some functional groups already removed under 300°C calcination due to several oxidation numbers possessed by Mn leading to more flexibility. The XRD diffractograms for both MgFe2O4 and MnFeO3 show that the transition phase from amorphous to crystalline structure occurred in the temperature range of 300-600°C. The SEM mappings based on the Fe distribution for both MgFe2O4 and MnFeO3 show that more Fe distributed over the ferrites surface at 600 and 800°C, while the SEM mappings for both ferrites (Mg and Mn) show less Fe distribution at 300°C calcination, thus, it indicates more repulsion force bearing by higher amounts of Fe atoms at higher thermal agitation due to volume expansion. The TEM spectra proved that both ferrites existed as crystals after calcined at 600°C. The fabricated ferrites have remarkable electrical properties useful for the manufacture of semiconducting materials.

scholarly journals Preparation and characterization of magnetite-based silica nanocomposite

2004 ◽  
pp. 121-129 ◽  
Author(s):  
Mihaela Popovici ◽  
Cecilia Savii ◽  
Daniel Niznanský ◽  
Jan Subrt ◽  
Eva Vecernikova ◽  
...  
Keyword(s):  
Thermal Analyses ◽  
Sol Gel ◽  
Nitrogen Atmosphere ◽  
Thermal Treatments ◽  
Vibrating Sample Magnetometry ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Magnetite Phase

Sol-gel method and successive thermal treatments in vacuum and nitrogen atmosphere were employed to synthesize magnetite nanoparticles isolate them with the aid of amorphous silica. Thermogravimetric and differential thermal analyses coupled with mass spectrometry, X-ray diffraction, transmission electron microscopy, M?ssbauer spectroscopy and vibrating sample magnetometry measurements were performed on the obtained nanocomposites. The effect of atmosphere on the formation of magnetite phase was remarkable.

scholarly journals Adsorption characteristics of 2,4-dichorophenoxy acetic acid onto surfactant modified titania nanoparticles

2021 ◽  
Vol 10 (4) ◽  
pp. xx-xx
Author(s):  
Dung Le Thi ◽  
Loan Nguyen Quynh ◽  
Thang Nguyen Duc ◽  
Son Le Thanh ◽  
Duc Pham Tien
Keyword(s):  
Acetic Acid ◽  
Surface Modification ◽  
Cetyltrimethylammonium Bromide ◽  
Sol Gel ◽  
Titania Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Adsorption Mechanisms ◽  
Transmission Electron ◽  
Effective Conditions

The present study investigated adsorption of 2,4-dichorophenoxy acetic acid(2,4-D) on titania (TiO2) nanoparticles with surface modification by cationic surfactant, cetyltrimethylammonium bromide (CTAB). Titania nanoparticles which were successfully synthesized by sol-gel method, were characterized by X-ray diffraction (XRD) and Transmission electron microscopy (TEM). Surface modification of TiO2 with CTAB enhanced the removal of 2,4-D significantly. Some effective conditions affect to the removal of 2,4-D using CTAB modified TiO2 such as pH and adsorbent dosage were systematically studied and found to be 5 and 10 mg/mL, respectively. Adsorption mechanisms of 2,4-D onto CTAB modified TiO2 was suggested based on the change in surface charge after adsorption. 

Sign in / Sign up

Export Citation Format

Share Document