scholarly journals Functionalized Wool as an Efficient and Sustainable Adsorbent for Removal of Zn(II) from an Aqueous Solution

Materials ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3208 ◽  
Author(s):  
Marjana Simonič ◽  
Lidija Fras Zemljič
Keyword(s):  
Metal Binding ◽  
Metal Ion ◽  
Chitosan Solution ◽  
Sorption Process ◽  
Ion Concentration ◽  
Amino Groups ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Polyelectrolyte Titration ◽  
Physical And Chemical

In this paper, the aim of the research was to obtain a highly efficient wool-based sorbent for the removal of zinc Zn(II) from wastewater. To increase the functional groups for metal binding, the wool was functionalized with chitosan. Chitosan has amino groups through which metals can be complexed easily to chelates. The physical and chemical modification of chitosan on wool was performed to analyze the influence of the coating bond on the final ability of the wool to remove metals. The presence of functional chitosan groups onto wool after adsorption was verified by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FT-IR) spectra. The effective binding of chitosan to wool was also determined by potentiometric and polyelectrolyte titration methods. The latter titration was used to analyze the chitosan desorption. The main part of the study was the sorption of Zn(II) on natural and functionalized wool. The influence was investigated as a function of contact time, pH, metal ion concentration and temperature on the sorption process. The absorbent with the highest concentration of protonated amino groups (607.7 mmol/kg) and responding sorption capacity of 1.52 mg/g was obtained with wool physically modified by a macromolecular chitosan solution (1%) at pH = 7. Adsorption of Zn(II) onto pristine and modified wool corresponded to pseudo-second order kinetics (R2 > 0.9884). The Langmuir model was found to be more suitable (R2 > 0.9866) in comparison to the Freundlich model. The Zn(II) sorption process was spontaneous (∆G < 0) and exothermic (∆H < 0). The results found in this study are significant for escalating the possible use of wool modified with polysaccharide coatings as a sustainable source to improve or increase the metal sorption activity of wool.

Removal of Mn(II) from Aqueous Solution Using Saponified Garlic Peel

2014 ◽  
Vol 694 ◽  
pp. 382-386 ◽  
Author(s):  
Bo Liang ◽  
Wan He Zhao ◽  
Kai Huang ◽  
Hong Min Zhu
Keyword(s):  
Metal Ion ◽  
Chemical Properties ◽  
Correlation Coefficients ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Physical And Chemical ◽  
Garlic Peel

The removal of Mn (II) ion by saponified garlic peel (S-GP) was investigated using batch adsorption. SEM and FT-IR were employed to investigate the physical and chemical properties of S-GP. The adsorption was evaluated as a function of initial metal ion concentration, contact time and temperature. The maximum adsorption capacity for Mn (II) was 0.51 mol/kg, and the adsorption process followed the Langmuir model. Pseudo-second-order models fitted the experimental data well and kinetic parameters, rate constants, equilibrium sorption capacity and related correlation coefficients at various temperatures were calculated and discussed. A possible adsorption mechanism based on a cation exchange was proposed for the adsorption of Mn (II).

Adsorption of Cu(II), Ni(II) and Zn(II) ions by nano kaolinite: Thermodynamics and kinetics studies

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Adsorption Process ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Adsorption Data ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir

An easy route for preparation emulsion of kaolinite (Al2Si2O5.4H2O) from Sweileh sand deposits, west Amman, Jordan by hydrochloric acid under continuous stirring for 4 h at room temperature was performed and nano kaolinite powder was used as an adsorbent for the removal of Cu(II), Zn(II) and Ni(II) ions. Nano kaolinite was characterized by XRD, FT-IR and SEM techniques. Effect of pH, adsorbent dose, initial metal ion concentration, contact time and temperature on adsorption process was examined. The negative values of ΔGo and the positive value of ΔHo revealed that the adsorption process was spontaneous and endothermic. The Langmuir isotherm model fitted well to metal ions adsorption data and the adsorption capacity. The kinetic data provided the best correlation of the adsorption with pseudo-second order kinetic model. In view of promising efficiency, the nano kaolinite can be employed for heavy metal ions adsorption.

scholarly journals Isothermal, kinetics and thermodynamics studies of the biosorption of Pb(II) ion from aqueous solution using the scale of croaker fish (Genyonemus lineatus)

2013 ◽  
Vol 3 (3) ◽  
pp. 239-248
Author(s):  
Mojisola O. Nkiko ◽  
Abideen I. Adeogun ◽  
N. A. Adesola Babarinde ◽  
Oluwabunmi J. Sharaibi
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Sorption Process ◽  
Ion Concentration ◽  
Isothermal Kinetics ◽  
Fish Scale ◽  
Biosorption Process ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Biomass Dosage

Biosorbent prepared from the scale of croaker fish (Genyonemus lineatus) has been used for the removal of Pb(II) ion from aqueous solution in a batch system. The effects of some important parameters such as pH, initial metal concentration, temperature and biosorbent dosage on biosorption capacity were investigated. Equilibrium time for the biosorption process is 20 and 30 min at lower and higher concentrations, respectively. The process at 28 °C is in agreement with a pseudo-second-order kinetics model. The equilibrium data obeyed the Langmuir adsorption isotherm with a maximum monolayer adsorption capacity of 14.58 mg g−1. The study showed that the sorption process depends on biomass dosage, temperature, pH and initial metal ion concentration. The calculated thermodynamics parameters (ΔGo, ΔHo and ΔSo) indicated that the biosorption of the metal ion onto fish scale is feasible, spontaneous and exothermic in nature.

scholarly journals Adsorption of Pd (II) and Au (III) Ions by Commercial Tris(2-Aminoethyl) Amine Polystyrene Polymer Beads

2020 ◽  
Author(s):  
Merve Özçelik ◽  
Mustafa CAN ◽  
Mustafa İmamoğlu
Keyword(s):  
Equilibrium Constant ◽  
Thermodynamic Parameters ◽  
Metal Ion ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Polymer Beads ◽  
Pseudo Second Order ◽  
Chlorine Ions ◽  
Ft Ir

Adsorption of gold, and palladium species containing chlorine ions species onto commercial N-{2-[Bis(2-aminoethyl)amino]ethyl}aminomethyl–polystyrene polymer beads (TRIS) were investigated. The influence of the pH, initial metal ion concentration, and contact time on the adsorption performance was examined in a batch adsorption experiment. Langmuir, Modified Langmuir, Freundlich and Freundlich, Dubinin–Radushkevich isotherm model variables are calculated. The Langmuir monolayer adsorption capacities of the Pd (II), and Au (III) chlorine ions species were found to be 204.5, and 168.5 mg/g, respectively. The two metal adsorption kinetics fit the pseudo-second order kinetic models. In thermodynamic calculations, the choice of different equilibrium constant and withal using dimension containing constant usage are an important problem in the field. To overcome these problems, the Modified Langmuir isotherm equilibrium constant is used at determination of thermodynamic parameters. Adsorption mechanism steps were characterized by using FT-IR, SEM, and EDS. The adsorbent is interacted with each metal ions in HCl solution electrostatic interaction and surface complex formation between the amine groups. The calculation of the thermodynamic parameters using the dimensionless modified Langmuir equilibrium constant calculated more satisfying and more reliable way. All thermodynamic parameters suggested that Pd (II) and Au (III) adsorptions onto TRIS beads was a spontaneous, physisorption.

scholarly journals Adsorption of Pd (II) and Au (III) Ions by Commercial Tris(2-Aminoethyl) Amine Polystyrene Polymer Beads

2020 ◽  
Author(s):  
Merve Özçelik ◽  
Mustafa CAN ◽  
Mustafa İmamoğlu
Keyword(s):  
Equilibrium Constant ◽  
Thermodynamic Parameters ◽  
Metal Ion ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Polymer Beads ◽  
Pseudo Second Order ◽  
Chlorine Ions ◽  
Ft Ir

Adsorption of gold, and palladium species containing chlorine ions species onto commercial N-{2-[Bis(2-aminoethyl)amino]ethyl}aminomethyl–polystyrene polymer beads (TRIS) were investigated. The influence of the pH, initial metal ion concentration, and contact time on the adsorption performance was examined in a batch adsorption experiment. Langmuir, Modified Langmuir, Freundlich and Freundlich, Dubinin–Radushkevich isotherm model variables are calculated. The Langmuir monolayer adsorption capacities of the Pd (II), and Au (III) chlorine ions species were found to be 204.5, and 168.5 mg/g, respectively. The two metal adsorption kinetics fit the pseudo-second order kinetic models. In thermodynamic calculations, the choice of different equilibrium constant and withal using dimension containing constant usage are an important problem in the field. To overcome these problems, the Modified Langmuir isotherm equilibrium constant is used at determination of thermodynamic parameters. Adsorption mechanism steps were characterized by using FT-IR, SEM, and EDS. The adsorbent is interacted with each metal ions in HCl solution electrostatic interaction and surface complex formation between the amine groups. The calculation of the thermodynamic parameters using the dimensionless modified Langmuir equilibrium constant calculated more satisfying and more reliable way. All thermodynamic parameters suggested that Pd (II) and Au (III) adsorptions onto TRIS beads was a spontaneous, physisorption.

scholarly journals Polymeric Substitution of Triazole Moieties in Cellulosic Schiff Base for Heavy Metal Complexation Studies

2021 ◽  
Author(s):  
R MAHALAKSHMI ◽  
SARAVANAN R ◽  
P SELVAKUMAR ◽  
M S KARTHIKEYAN ◽  
L RAVIKUMAR
Keyword(s):  
Schiff Base ◽  
Metal Ion ◽  
Equilibrium Concentration ◽  
Sorption Process ◽  
Complexation Reaction ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Adsorption Desorption

Abstract The adsorption of metal ions from wastewater using Schiff base cellulose bearing pendulant heterocyclic chelating groups (MC-Tz) as a sorbent is the subject of this paper. Solid state 13 C-NMR, FT-IR, SEM, and XRD spectroscopy, as well as TGA and XRD were utilized to examine the adsorbent. The batch sorption process used pH, adsorbent dose, initial adsorbate concentration, temperature, as well as contact time to calculate the metal ion levels. The optimum pH-6.0, with the complexation reaction and ion exchange phase as the mechanisms at work. To investigate the equilibrium concentration and temperature-dependent rate constants, various models, such as the Langmuir, Freundlich, Temkin, and Redlich-Peterson adsorption isotherm were utilized. A Kinetic study shows that the Langmuir is more in agreement with the Pseudo-second order Kinetic model. Adsorption-Desorption experiments over four cycles demonstrated the feasibility of the sorbent's regeneration potential and the measured values of enthalpy and entropy explain the essence of the adsorption process. The objective of this research is to discover non-toxic, environmentally friendly adsorbent biodegradable components and to conduct evaluations to determine their use in wastewater treatment.

scholarly journals Adsorption of Pd (II) and Au (III) Ions by Commercial Tris(2-Aminoethyl) Amine Polystyrene Polymer Beads

2020 ◽  
Author(s):  
Merve Özçelik ◽  
Mustafa CAN ◽  
Mustafa Imamoglu
Keyword(s):  
Equilibrium Constant ◽  
Thermodynamic Parameters ◽  
Metal Ion ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Polymer Beads ◽  
Pseudo Second Order ◽  
Chlorine Ions ◽  
Ft Ir

Adsorption of gold, rhodium, platinium, and palladium species containing chlorine ions species onto commercial N-{2-[Bis(2-aminoethyl)amino]ethyl}aminomethyl–polystyrene polymer beads (TRIS) were investigated. The influence of the pH, initial metal ion concentration, and contact time on the adsorption performance was examined in a batch adsorption experiment. Langmuir, Modified Langmuir, Freundlich and Freundlich, Dubinin–Radushkevich isotherm model variables are calculated. The Langmuir monolayer adsorption capacities of the Pd (II), and Au (III) chlorine ions species were found to be 204.5, and 168.5 mg/g, respectively. The two metal adsorption kinetics fit the pseudo-second order kinetic models. In thermodynamic calculations, the choice of different equilibrium constant and withal using dimension containing constant usage are an important problem in the field. To overcome these problems, the Modified Langmuir isotherm equilibrium constant is used at determination of thermodynamic parameters. Adsorption mechanism steps were characterized by using FT-IR, SEM, and EDS. The adsorbent is interacted with each metal ions in HCl solution electrostatic interaction and surface complex formation between the amine groups. The calculation of the thermodynamic parameters using the dimensionless modified Langmuir equilibrium constant calculated more satisfying and more reliable way. All thermodynamic parameters suggested that Pd (II) and Au (III) adsorptions onto TRIS beads was a spontaneous, physisorption.

scholarly journals Recovery of Lanthanum(III) and Nickel(II) Ions from Acidic Solutions by the Highly Effective Ion Exchanger

Molecules ◽  
2020 ◽  
Vol 25 (16) ◽  
pp. 3718
Author(s):  
Dorota Kołodyńska ◽  
Dominika Fila ◽  
Zbigniew Hubicki
Keyword(s):  
Sorption Process ◽  
Sorption Equilibrium ◽  
Phase Contact Time ◽  
Acidic Solutions ◽  
Dynamic Experiments ◽  
Maximum Sorption ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Resin Regeneration ◽  
Sodium Form

The recovery of La(III) and Ni(II) ions by a macroporous cation exchanger in sodium form (Lewatit Monoplus SP112) has been studied in batch experiments under varying HNO3 concentrations (0.2–2.0 mol/dm3), La(III) and Ni(II) concentrations (25–200 mg/dm3), phase contact time (1–360 min), temperature (293–333 K), and resin mass (0.1–0.5 g). The experimental data revealed that the sorption process was dependent on all parameters used. The maximum sorption capacities were found at CHNO3 = 0.2 mol/dm3, m = 0.1 g, and T = 333 K. The kinetic data indicate that the sorption followed the pseudo-second order and film diffusion models. The sorption equilibrium time was reached at approximately 30 and 60 min for La(III) and Ni(II) ions, respectively. The equilibrium isotherm data were best fitted with the Langmuir model. The maximum monolayer capacities of Lewatit Monoplus SP112 were equal to 95.34 and 60.81 mg/g for La(III) and Ni(II) ions, respectively. The thermodynamic parameters showed that the sorption process was endothermic and spontaneous. Moreover, dynamic experiments were performed using the columns set. The resin regeneration was made using HCl and HNO3 solutions, and the desorption results exhibited effective regeneration. The ATR/FT-IR and XPS spectroscopy results indicated that the La(III) and Ni(II) ions were coordinated with the sulfonate groups.

scholarly journals Eco-Efficient Biosorbent Based on Leucaena leucocephala Residues for the Simultaneous Removal of Pb(II) and Cd(II) Ions from Water System: Sorption and Mechanism

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
C. A. Cimá-Mukul ◽  
Youness Abdellaoui ◽  
Mohamed Abatal ◽  
Joel Vargas ◽  
Arlette A. Santiago ◽  
...  
Keyword(s):  
Leucaena Leucocephala ◽  
Metal Ion ◽  
Water System ◽  
Ion Concentration ◽  
Point Of Zero Charge ◽  
Southern Mexico ◽  
Lead And Cadmium ◽  
Biosorption Process ◽  
Monolayer Adsorption ◽  
Pseudo Second Order

Leucaena leucocephala is a potential source of polyphenols widely available in southern Mexico. This work highlights the extraction of polyphenols from Leucaena leucocephala leaves waste (LLEPs) and the evaluation of their efficiency to remove the single and multicomponent Pb(II) and Cd(II) metal ions from aqueous solutions. Batch test conditions were carried out to examine the effects of contact time, initial metal ion concentration, and adsorbent dosage on the biosorption process. The surface textures and the composition of the LLEP biosorbent was characterized using pH of point of zero charge (pHPZC), attenuated total reflectance Fourier transform infrared (ATR-FTIR), and matrix-assisted laser desorption/ionization time of flight (MALDI-TOF) mass spectrometry, respectively. Further analysis using ATR-FTIR after adsorption contact of biosorbent was also investigated. The highest Langmuir saturation monolayer adsorption capacity, qm, for the removal of Pb(II) by LLEPs was obtained as 25.51 and 21.55 mg/g in mono- and bimetal solutions, respectively. The pseudo-second-order model provided the best fit for the kinetic data obtained for the removal of Pb(II), Cd(II), and their mixture, and the k2 values depend on the adsorbent mass. This implied that the chemisorption process might be the mechanism of the solute ions-LLEPs interaction in this study. Furthermore, nearly 100% removal of lead and cadmium individually and 95% of their mixture was found using 0.9 g of LLEPs.

Chelating modified cellulose bearing pendant heterocyclic moiety for effective removal of heavy metals

2019 ◽  
Vol 80 (8) ◽  
pp. 1549-1561
Author(s):  
R. Saravanan ◽  
R. Mahalakshmi ◽  
M. S. Karthikeyan ◽  
L. Ravikumar
Keyword(s):  
Metal Ion ◽  
Ion Concentration ◽  
Batch Mode ◽  
Effective Removal ◽  
Removal Of Heavy Metals ◽  
Intra Particle Diffusion ◽  
Functional Factors ◽  
Pseudo Second Order ◽  
Heterocyclic Moiety ◽  
Maximum Removal

Abstract Cellulose bearing pendant Schiff base with heterocyclic chelating groups (CMC-Bz) was synthesized, which were fully characterized using various instrumental techniques such as solid state carbon-13 nuclear magnetic resonance (13C-NMR), Fourier transform infrared (FTIR), scanning electron microscope (SEM) and energy dispersive X-ray analysis (EDX) spectra. The adsorption of toxic metals onto cellulosic material was tested in a batch mode operation. The adsorption functional factors such as pH, adsorbent dose, metal ion concentration, equilibrium time and temperature were experimentally optimized for the maximum removal of Cu(II) and Pb(II) ions. Adsorption isotherms were evaluated with Langmuir, Freundlich, Temkin and Redlich–Peterson isotherms. Kinetic parameters and equilibrium adsorption capacities were investigated for pseudo-first-order, pseudo-second-order and intra-particle diffusion models. Thermodynamic parameters and reusability were also evaluated.

Sign in / Sign up

Export Citation Format

Share Document