scholarly journals Electromagnetic Interference Shielding Behavior of Magnetic Carbon Fibers Prepared by Electroless FeCoNi-Plating

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3774
Author(s):  
Yoon-Ji Yim ◽  
Jae Jun Lee ◽  
Alexandre Tugirumubano ◽  
Sun Ho Go ◽  
Hong Gun Kim ◽  
...  
Keyword(s):  
Carbon Fibers ◽  
Electromagnetic Interference ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
X Ray Diffraction ◽  
Emi Shielding Effectiveness ◽  
Plating Method ◽  
Magnetic Metal ◽  
Shielding Properties ◽  
Metal Layers

In this study, soft magnetic metal was coated on carbon fibers (CFs) using an electroless FeCoNi-plating method to enhance the electromagnetic interference (EMI) shielding properties of CFs. Scanning electron microscopy, X-ray diffraction, and a vibrating sample magnetometer were employed to determine the morphologies, structural properties, and magnetic properties of the FeCoNi-CFs, respectively. The EMI shielding behavior of the FeCoNi-CFs was investigated in the frequency range of 300 kHz to 3 GHz through vector network analysis. The EMI shielding properties of the FeCoNi-CFs were significantly enhanced compared with those of the as-received CFs. The highest EMI shielding effectiveness of the 60-FeCoNi-CFs was approximately 69.4 dB at 1.5 GHz. The saturation magnetization and coercivity of the 60-FeCoNi-CFs were approximately 103.2 emu/g and 46.3 Oe, respectively. This indicates that the presence of FeCoNi layers on CFs can lead to good EMI shielding due to the EMI adsorption behavior of the magnetic metal layers.

EMI Shielding Properties of Polymer Blend with the Inclusion of Graphene Nano Platelets

2021 ◽  
Vol 875 ◽  
pp. 160-167
Author(s):  
Muhammad Fayzan Shakir ◽  
Asra Tariq
Keyword(s):  
Electromagnetic Interference ◽  
Coaxial Cable ◽  
Network Analyzer ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electrically Conductive ◽  
Emi Shielding Effectiveness ◽  
Increasing Trend ◽  
Shielding Properties ◽  
Basic Prediction

Polymer nano composites based on poly vinyl chloride matrix were fabricated using polyaniline (PANI) and graphene nano platelets (GNP) as electrically conductive nano filler for the application of electromagnetic interference (EMI) shielding. DC conductivity was first evaluated by using cyclic voltammetry and found an increasing trend of electrical conductivity as PANI and GNP was added in PVC matrix that confirms the formation of electrically conductive network structure. Dielectric properties like dielectric constant, dielectric loss and AC conductivity were evaluated in frequency range of 100 Hz to 3 MHz that gives basic prediction for EMI shielding effectiveness. Vector Network Analyzer (VNA) was used to assess EMI shielding properties using coaxial cable method in 11GHz to 20GHz range and it was found that a maximum of 29 dB shielding was archived with the incorporation of 15 wt% of PANI in PVC. This value increased to 56 dB as 5 wt% GNP added in PVC/PANI 15 wt% blend. Interaction of matrix with filler, nature of filler and dispersion of filler in matrix are the key parameters for achieving high shielding effectiveness.

scholarly journals Fabrication of flexible thin veneer for electromagnetic interference shielding and decoration through simple electroless plating

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 5737-5748
Author(s):  
Yu Wang ◽  
Suri Gala ◽  
Jin Tian Huang
Keyword(s):  
Electromagnetic Interference ◽  
Poplar Wood ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
X Ray Diffraction ◽  
Wood Veneer ◽  
Emi Shielding Effectiveness ◽  
Veneer Surface ◽  
Diffraction Patterns ◽  
Thin Veneer

A widely applicable electromagnetic interference (EMI) shielding and decorative thin veneer containing copper was prepared with simple electroless technology. Copper was used as the structural and EMI reflection component to reinforce the mechanical strength and EMI shielding effectiveness. Both the texture and structural properties of copper deposited on poplar wood were characterized. The X-ray diffraction patterns indicated that the copper deposited on poplar wood had a crystallite size between 7.9 nm and 15.9 nm, and the copper crystallites grew rapidly as the number of electroless runs increased, which was consistent with the resistivity and microscopy analyses. The mechanical and EMI shielding effectiveness results showed that after two electroless runs, the wood veneer surface was completely covered, which improved the EMI shielding effectiveness and mechanical properties of wood veneer. The material could be bent 360° without being damaged and had a good decorative effect.

scholarly journals Carbon Fibers Encapsulated with Nano-Copper: A Core‒Shell Structured Composite for Antibacterial and Electromagnetic Interference Shielding Applications

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 460 ◽  
Author(s):  
Yue Jiao ◽  
Caichao Wan ◽  
Wenbo Zhang ◽  
Wenhui Bao ◽  
Jian Li
Keyword(s):  
Carbon Fibers ◽  
Electromagnetic Interference ◽  
Interfacial Polarization ◽  
Core Shell ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Step Method ◽  
Water Contact ◽  
Conduction Loss ◽  
Emi Shielding Effectiveness

A facile and scalable two-step method (including pyrolysis and magnetron sputtering) is created to prepare a core‒shell structured composite consisting of cotton-derived carbon fibers (CDCFs) and nano-copper. Excellent hydrophobicity (water contact angle = 144°) and outstanding antibacterial activity against Escherichia coli and Staphylococcus aureus (antibacterial ratios of >92%) are achieved for the composite owing to the composition transformation from cellulose to carbon and nano-size effects as well as strong oxidizing ability of oxygen reactive radicals from interactions of nano-Cu with sulfhydryl groups of enzymes. Moreover, the core‒shell material with high electrical conductivity induces the interfacial polarization loss and conduction loss, contributing to a high electromagnetic interference (EMI) shielding effectiveness of 29.3 dB. Consequently, this flexible and multi-purpose hybrid of nano-copper/CDCFs may be useful for numerous applications like self-cleaning wall cladding, EMI shielding layer and antibacterial products.

scholarly journals Ultrathin, Lightweight, and Flexible CNT Buckypaper Enhanced Using MXenes for Electromagnetic Interference Shielding

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Rongliang Yang ◽  
Xuchun Gui ◽  
Li Yao ◽  
Qingmei Hu ◽  
Leilei Yang ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
High Performance ◽  
Electronic Devices ◽  
Deposition Process ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
X Band ◽  
Wearable Electronic Devices ◽  
Emi Se

AbstractLightweight, flexibility, and low thickness are urgent requirements for next-generation high-performance electromagnetic interference (EMI) shielding materials for catering to the demand for smart and wearable electronic devices. Although several efforts have focused on constructing porous and flexible conductive films or aerogels, few studies have achieved a balance in terms of density, thickness, flexibility, and EMI shielding effectiveness (SE). Herein, an ultrathin, lightweight, and flexible carbon nanotube (CNT) buckypaper enhanced using MXenes (Ti3C2Tx) for high-performance EMI shielding is synthesized through a facile electrophoretic deposition process. The obtained Ti3C2Tx@CNT hybrid buckypaper exhibits an outstanding EMI SE of 60.5 dB in the X-band at 100 μm. The hybrid buckypaper with an MXene content of 49.4 wt% exhibits an EMI SE of 50.4 dB in the X-band with a thickness of only 15 μm, which is 105% higher than that of pristine CNT buckypaper. Furthermore, an average specific SE value of 5.7 × 104 dB cm2 g−1 is exhibited in the 5-μm hybrid buckypaper. Thus, this assembly process proves promising for the construction of ultrathin, flexible, and high-performance EMI shielding films for application in electronic devices and wireless communications.

scholarly journals Electromagnetic Interference Shielding Performance Enhancement of Stretchable Transparent Conducting Silver Nanowire Networks with Graphene Encapsulation

2021 ◽  
Author(s):  
Siyi Yan ◽  
Peng Li ◽  
Zhongshi Ju ◽  
He Chen ◽  
Jiangang Ma
Keyword(s):  
Electromagnetic Interference ◽  
Performance Enhancement ◽  
Mechanical Stability ◽  
Silver Nanowire ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Dielectric Polarization ◽  
Emi Shielding Effectiveness ◽  
Graphene Films ◽  
Transparent Conducting

Abstract Silver nanowire (AgNW) networks are promising transparent conducting materials for electromagnetic interference (EMI) shielding and diverse optoelectronic devices. However, the poor contact between adjacent AgNWs leads to low electrical conductivity and weak mechanical stability of AgNW networks, which are limiting the practical application of these electronics. Here we report an efficient strategy to improve the overall performance of AgNW networks, in which the AgNW networks are sandwiched between two layers of graphene films. The graphene films improve the contact of overlapped AgNWs and bridge the discrete AgNWs, and thus increase the conductivity of graphene/AgNWs/graphene (GAG) films. Microwave permittivity measurements together with mechanism analyses reveal that the graphene films can enhance the EMI shielding effectiveness of AgNW networks through offering extra conduction loss, multiple dielectric polarization centers and multi-reflection processes. As a result, the GAG film with an average transmittance of 88% exhibits a sheet resistance lower than 15 Ω sq− 1 and an EMI shielding effectiveness of 31 dB (in the frequency range of 8.2‒12.4 GHz) after repeated stretching and release at a strain of 40%. Such a total performance is superior to that of most of as-reported transparent conductors. The GAG films therefore show application potential in the age of Internet of Things that electromagnetic radiation pollutions are everywhere.

Flexible, conductive, porous, fibrillar polymer–gold nanocomposites with enhanced electromagnetic interference shielding and mechanical properties

2017 ◽  
Vol 5 (5) ◽  
pp. 1095-1105 ◽  
Author(s):  
Jun Li ◽  
Hu Liu ◽  
Jiang Guo ◽  
Zhen Hu ◽  
Zhijiang Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Gold Nanoparticles ◽  
Self Assembly ◽  
Electromagnetic Interference ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Emi Shielding Effectiveness ◽  
Conductive Nanocomposites ◽  
Gold Nanocomposites

Flexible lightweight conductive nanocomposites prepared by self-assembly of gold nanoparticles on charged polymer nanofibers show enhanced EMI shielding effectiveness and mechanical properties.

CNT@PDMS/NW composite materials with superior electromagnetic shielding

Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Zi-Jing Zhou ◽  
Zhen-Xing Wang ◽  
Xiao-shuai Han ◽  
Jun-Wen Pu
Keyword(s):  
Electromagnetic Interference ◽  
Cellulose Nanofibers ◽  
Original Structure ◽  
Impregnation Method ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Band Frequency ◽  
Conductive Composites ◽  
Emi Shielding Effectiveness ◽  
Xrd Patterns

Abstract Lightweight materials with high electrical conductivity and hydrophobic mechanical properties are ideal materials for electromagnetic interference (EMI) shielding. Herein, the conductive composites with great EMI shielding effectiveness (SE) were successfully obtained by introducing multi-walled carbon nanotube (CNT) and polydimethylsiloxane (PDMS) based on the original structure of natural wood (NW). CNT@PDMS/NW composites were prepared via vacuum-pulse impregnation method and characterized by Fourier transform infrared (FTIR), scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) patterns, hydrophobicity analysis, and EMI shielding performance. As demonstrated, CNT nanosheets were successfully inserted into wood matrices, and hydrogen bonding between CNT nanosheets and cellulose nanofibers induced the fabrication of CNT@PDMS/NW composites. CNT@PDMS/NW composites exhibited excellent EMI SE values of 25.2 dB at the X-band frequency.

Freestanding Fe3O4 / Ti3C2Tx MXene / polyurethane composite film with efficient electromagnetic shielding and ultra-stretchable performance

2022 ◽  
Author(s):  
Yongqin Hu ◽  
Chen Hou ◽  
Yuxia Shi ◽  
Jiamei Wu ◽  
Da Yang ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Tensile Elongation ◽  
Energy Conversion Efficiency ◽  
High Energy ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
Polyurethane Composite ◽  
Human Reproductive ◽  
Interfacial Scattering

Abstract Electromagnetic pollution seriously affects the human reproductive system, cardiovascular system, people’s visual system, and so on. A novel versatile stretchable and biocompatible electromagnetic interference (EMI) shielding film has been developed, which could effectively attenuate electromagnetic radiation. The EMI shielding film was fabricated with a convenient solution casting and steam annealing with 2D MXene, iron oxide nanoparticles, and soluble polyurethane. The EMI shielding effectiveness is about 30.63 dB at 8.2 GHz, based on its discretized interfacial scattering and high energy conversion efficiency. Meanwhile, the excellent tensile elongation is 30.5%, because of the sliding migration and gradient structure of the nanomaterials doped in a polymer matrix. In addition, the film also demonstrated wonderful biocompatibility and did not cause erythema and discomfort even after being attached to the arm skin over 12 hours, which shows the great potential for attenuation of electromagnetic irradiation and protection of human health.

Sign in / Sign up

Export Citation Format

Share Document