scholarly journals Design and Development of an E-Textile Mat for Assuring the Comfort of Bedridden Persons

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5437
Author(s):  
Daniela Sofronova ◽  
Radostina A. Angelova ◽  
Yavor Sofronov
Keyword(s):  
Body Position ◽  
Production Method ◽  
High Wear Resistance ◽  
Continuous Control ◽  
Decubitus Ulcers ◽  
New Production ◽  
Electrically Conductive ◽  
Software Application ◽  
Non Invasive ◽  
Conductive Properties

An e-textile mat with capacitive textile sensors was designed and manufactured to monitor body position and prevent decubitus ulcers in the case of bedridden people. The sensors were incorporated through a process of machine embroidery with electrically conductive threads. A new production method for the conductive threads is still expected to be developed, resulting in good conductive properties, high wear resistance and durability. Samples of five variants of motifs without cross-stitching were studied, and the capacity and electrical resistance were determined experimentally. A prototype of the e-textile mat was made with a motif showing the best ratio between the inserted thread and the measured capacity. A hardware solution and a software application for collecting, processing and visualising the received information were developed. Tests were performed in real conditions, which clearly showed that the designed e-textile mat could be successfully applied for non-invasive and continuous control of the position of the human body in a supine position to prevent decubitus ulcers.

scholarly journals Mechanical and Electrical Performance of Flexible Polymer Film Designed for a Textile Electrically-Conductive Path

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2169
Author(s):  
Agnieszka Tabaczyńska ◽  
Anna Dąbrowska ◽  
Marcin Masłowski ◽  
Anna Strąkowska
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Surface Resistance ◽  
Conductive Filler ◽  
Extrusion Process ◽  
Electrical Performance ◽  
Electrically Conductive ◽  
Non Invasive ◽  
Flexible Polymer ◽  
The Stability

Electro-conductive paths that are mechanically resistant and stable during simulated aging cycles are promising, in relation to the non-invasive application in e-textiles in our everyday surroundings. In the paper, an analysis of the influence of electro-conductive filler, as well as ionic liquid on surface resistance is provided. Authors proved that depending on the tested variant, obtained surface resistance may vary from 50 kΩ (when 50 phr of Ag and [bmim][PF6] ionic liquid applied) to 26 GΩ (when 25 phr of Ag and [bmim][PF6] ionic liquid applied). The samples were also evaluated after simulated aging cycles and the stability of electric properties was confirmed. Moreover, it was proved that the addition of ionic liquids reduced the resistance of vulcanizates, while no significant influence of the extrusion process on conductivity was observed.

scholarly journals RoboEye, an Efficient, Reliable and Safe Semi-Autonomous Gaze Driven Wheelchair for Domestic Use

Technologies ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 16
Author(s):  
Luca Maule ◽  
Alessandro Luchetti ◽  
Matteo Zanetti ◽  
Paolo Tomasin ◽  
Marco Pertile ◽  
...  
Keyword(s):  
Mobile Robotics ◽  
Cost Effective ◽  
Continuous Control ◽  
Eye Tracker ◽  
Motor Disability ◽  
Non Invasive ◽  
Severe Motor ◽  
Core Elements ◽  
Domestic Use ◽  
User Friendly

Any severe motor disability is a condition that limits the ability to interact with the environment, even the domestic one, caused by the loss of control over one’s mobility. This work presents RoboEYE, a power wheelchair designed to allow users to move easily and autonomously within their homes. To achieve this goal, an innovative, cost-effective and user-friendly control system was designed, in which a non-invasive eye tracker, a monitor, and a 3D camera represent some of the core elements. RoboEYE integrates functionalities from the mobile robotics field into a standard power wheelchair, with the main advantage of providing the user with two driving options and comfortable navigation. The most intuitive and direct modality foresees the continuous control of frontal and angular wheelchair velocities by gazing at different areas of the monitor. The second, semi-autonomous modality allows navigation toward a selected point in the environment by just pointing and activating the wished destination while the system autonomously plans and follows the trajectory that brings the wheelchair to that point. The purpose of this work was to develop the control structure and driving interface designs of the aforementioned driving modalities taking into account also uncertainties in gaze detection and other sources of uncertainty related to the components to ensure user safety. Furthermore, the driving modalities, in particular the semi-autonomous one, were modeled and qualified through numerical simulations and experimental verification by testing volunteers, who are regular users of standard electric wheelchairs, to verify the efficiency, reliability and safety of the proposed system for domestic use. RoboEYE resulted suitable for environments with narrow passages wider than 1 m, which is comparable with a standard domestic door and due to its properties with large commercialization potential.

Possibilities of Utilization of Waste Materials in Production of Electrically Conductive Composites on Silicate Basis

2021 ◽  
Vol 321 ◽  
pp. 171-176
Author(s):  
Jana Majerová ◽  
Rostislav Drochytka
Keyword(s):  
Nickel Powder ◽  
Cement Composite ◽  
Wire Drawing ◽  
Waste Materials ◽  
Electrically Conductive ◽  
Conductive Composites ◽  
Steel Wires ◽  
The Subject ◽  
Conductive Properties ◽  
Functional Fillers

The electrical conductivity of concrete can be achieved by adding steel wires or functional fillers. Commonly used fillers are nanotubes, carbon black, nickel powder and so on. These fillers are expensive, but there is a possibility to use waste materials. This is the subject of this experiment. The conductive properties of conductive sand, sludge from the wire drawing process, iron grinding dust waste and waste carbon were verified. From these fillers, waste carbon showed the best electrical properties (impedance). The impedance of the waste carbon was 0.31 Ω and the impedance of the cement composite containing 70% of the weight of waste carbon was less than 670 Ω.

scholarly journals Benign tumors of the heart: Myxoma of the right atrium - a case report

2018 ◽  
Vol 75 (5) ◽  
pp. 512-515 ◽  
Author(s):  
Sasa Hinic ◽  
Jelena Saric ◽  
Predrag Milojevic ◽  
Jelena Gavrilovic ◽  
Tijana Durmic ◽  
...  
Keyword(s):  
Case Report ◽  
Body Position ◽  
Atrial Myxoma ◽  
Right Atrial ◽  
Benign Tumors ◽  
Non Invasive ◽  
Right Atrial Myxoma ◽  
The Right

Introduction. Myxoma is the most common primary benign heart tumor. The most frequent location is the left atrium, the chamber of the heart that receives oxygen- rich blood from the lungs. Myxomas usually develop in women, typically between the ages of 40 and 60. Symptoms may occur at any time, but most often they are asymptomatic or oligosymptomatic for a long period of time. Symptoms usually go along with body position, and are related to compression of the heart cavities, embolization and the appearance of general symptoms. The diagnosis of benign tumors of the heart is based on anamnesis, clinical features and findings of the tumor masses by use of non-invasive and invasive imaging methods. Extensive surgical resection of the myxoma is curative with minimal mortality. Long term clinical and echocardiographic follow-up is mandatory. Case report. We reported a case of a 62-year-old male, presented with 15 days of intermittent shortness of breath, dizziness and feeling of heart palpitations and subsequently diagnosed with right atrial myxoma based on transthoracic echocardiography . The patient was emergently operated in our hospital. Long-term followup did not reveal recurrence. Conclusion. Our case was an atypical localisation of right atrial myxoma. Whether the intracardiac mass is benign or malignant, early surgery is obligatory in order to prevent complications.

scholarly journals Production organization capacity of ethnic minorities in northwestern region of Vietnam

2020 ◽  
Vol 210 ◽  
pp. 16004
Author(s):  
Thu Trang Vu ◽  
Dung Vu ◽  
Thi Mai Lan Nguyen
Keyword(s):  
Ethnic Minorities ◽  
Shifting Cultivation ◽  
Production Capacity ◽  
Production Method ◽  
Small Scale ◽  
New Production ◽  
Organization Capacity ◽  
Northwestern Region ◽  
Traditional Production ◽  
Production Organization

Survey results of 1,452 people representing families of 6 ethnic minorities in 11 communes of 7 districts in 7 provinces in the Northwest region shows that the production organization capacity of the ethnic minorities surveyed has changed, but still remains many limitations. The change in production capacity of ethnic minorities is reflected in the fact that the majority of families have produced in a new way (know how to use some machines, use new plant varieties and breeds, apply chemical fertilizers, use pesticides, and some agricultural products produced for sale). The limitations of the production organization capacity of ethnic minority families are shifting cultivation, dibbling, rudimentary production tools, low labor productivity, production by small-scale, autarky, shifting cultivation of wandering hilltribes). If comparing between traditional production method and new production method, the traditional production method is still more prevalent. One of the main causes of this situation is that ethnic minorities live in mountainous areas with difficult transportation, so the main cultivation method is shifting cultivation. The application of machines in production faces many difficulties.

scholarly journals Preparation Method of Spherical and Monocrystalline Aluminum Powder

Metals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 375 ◽  
Author(s):  
Mateusz Skalon ◽  
Marek Hebda ◽  
Ricardo Buzolin ◽  
Gernot Pottlacher ◽  
Stefan Mitsche ◽  
...  
Keyword(s):  
Silica Nanoparticles ◽  
Aluminum Powder ◽  
Electron Backscatter Diffraction ◽  
High Surface ◽  
Spherical Shape ◽  
Production Method ◽  
Processing Temperature ◽  
Powder Preparation ◽  
New Production ◽  
Aluminum Particles

This paper presents a new production method for a spherical and monocrystalline aluminum powder. Aluminum powder of irregular particle shapes was mixed with silica nanoparticles and heated to a temperature above the melting point of aluminum. Due to its molten state, high surface tension, and poor wettability, the aluminum particles were transformed into liquid and spherical droplets separated by silica nanoparticles. The spherical shape was then retained when the aluminum particles solidified. The influence of the processing temperature on the particle shape, phase composition, and microstructure was investigated. Moreover, calorimetric, X-ray diffraction, grain size, and scanning electron microscopy with electron backscatter diffraction (SEM-EBSD) measurements of the particles’ microstructure are presented. It is proven that, by this means, a spherical and monocrystalline aluminum powder can be efficiently created directly from an air-atomized irregular powder. The observed phenomenon of particles becoming round is of great importance, especially when considering powder preparation for powder-based additive manufacturing processes.

scholarly journals Justification of the active method of protecting the insulation of submersible electric motors

2019 ◽  
Vol 124 ◽  
pp. 02003
Author(s):  
V. A. Trushkin ◽  
O. N. Churlyaeva ◽  
R. V. Kozichev
Keyword(s):  
Physical Properties ◽  
Electrical Breakdown ◽  
Electrical Equipment ◽  
Working Environment ◽  
Operating Parameters ◽  
Insulation Resistance ◽  
Electric Motors ◽  
Electrically Conductive ◽  
Active Method ◽  
Conductive Properties

The article provides an analysis of the properties of the working environment of submersible electrical equipment. The influence of the operating parameters of electrical equipment on the physical properties of the fluid (its electrically conductive properties) is considered. Mathematical confirmation of the implementation of electroosmosis in the capillaries of the insulation of submersible electric motors is given. The rationale for the active method of protecting submersible electrical equipment from reducing insulation resistance and preventing electrical breakdown is given.

HORIZONTAL DRILLING, A NEW PRODUCTION METHOD

1988 ◽  
Vol 28 (1) ◽  
pp. 41
Author(s):  
Jacques Bosio
Keyword(s):  
World Wide ◽  
Horizontal Wells ◽  
Production Method ◽  
New Production ◽  
Horizontal Drilling ◽  
New Approach ◽  
Flow Geometry ◽  
The Future ◽  
Deviated Wells

Vertical or deviated wells cross a production formation for only short distances. Horizontal wells, however, are capable of remaining within a reservoir for distances up to several hundred metres in an effort to enhance production possibilities.A world-wide coverage of the method will be presented, with the latest information on drilling, logging, completion and costs.Application of horizontal wells will be described with an emphasis on the production results recently obtained and, more particularly, on the Rospo Mare field, offshore, in the Adriatic Sea.Horizontal wells are providing a new approach to the flow geometry within a production formation. There is no doubt that they will be used more and more in the future to optimise the drainage of most reservoirs.

scholarly journals Impact Toughness of FRTP Composites Produced by 3D Printing

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5654
Author(s):  
Milan Vaško ◽  
Milan Sága ◽  
Jaroslav Majko ◽  
Alan Vaško ◽  
Marián Handrik
Keyword(s):  
3D Printing ◽  
Mechanical Testing ◽  
Impact Load ◽  
Production Method ◽  
Research Area ◽  
New Production ◽  
Manufacturing Method ◽  
Continuous Fibre ◽  
Research Activities ◽  
The Impact

The additive manufacturing represents a new production method of composites reinforced with a continuous fibre. In recent times, the material produced by this new manufacturing method constituted a replacement for conventional materials—e.g., steel in many technical areas. As the research on FRTP composites is currently under way, the purpose of this article is to add information to the mosaic of studies in this research area. The scientific articles published until now have focused especially on mechanical testing, such as tensile and bending mechanical testing and their assessment. Therefore, the authors decided to carry out and assess the impact test of the FRTP composites produced by 3D printing because this area offers a large extent of research activities. We observed the influence of the reinforcement in the form of the micro-fibre carbon in the thermoplastic (Onyx) or a continuous reinforcement fibre in the lamina on the specimen’s behaviour during the impact load processes. The results of the experimental measurements show that the presence of a continuous fibre in the structure significantly affects the strength of the printed specimens; however, the design process of the printed object has to take into account the importance of selecting a suitable fibre type. The selection of a suitable strategy for arranging the fibre in the lamina and the direction of the impact load against the position of the fibre seem to be very important parameters.

Sign in / Sign up

Export Citation Format

Share Document