scholarly journals Effect of Temperature Field and Stress Field of Different Crack Behavior on Twins and Dislocations under Mg Alloy Rolling

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5668
Author(s):  
Jing Tian ◽  
Jiafei Deng ◽  
Quanxin Shi ◽  
Yuanying Chang ◽  
Wei Liang ◽  
...  

Aiming at the problem of the poor plasticity of magnesium alloy leading to serious edge cracks in the rolling process, this paper conducts a systematic study on the crack suppression mechanism of rolling under different thickness reductions. Using restricted rolling and conventional rolling, comparing the microstructure evolution of the plate after rolling, and combining the information of the simulated temperature field and stress field of the plates, the behavior of twins and dislocations under different thickness reductions is explained, and the influence of serious damage caused by single-pass hot rolling of magnesium alloy is explored. The compressive stress fields along with the transverse and normal directions under restricted rolling cause the compression twins to mature into secondary twins under rolling with small thickness reduction and induce a large number of tensile twins when the thickness reduction amount is increased. The multiple slips activated by the higher temperature field at the edge of the small thickness reduction amount cause dislocations to be distributed inside and outside the twins, while the edge with large thickness reduction can activate more slip due to the high-temperature field resulting from friction, resulting in the twin be destroyed.

2011 ◽  
Vol 103 ◽  
pp. 442-446
Author(s):  
Zhuo Fu ◽  
Yi Lun Liu ◽  
Xue Liu

According to actual structure parameters and the technological parameters in an aluminum hot rolling production line, consider the rolling of metal plastic deformation heat, the contact surface heat conductivity, friction heat effect on the rolled piece and the roller heat transfer, use finite element analysis software MSC.Marc to build thermo-mechanical coupled finite element simulation model about aluminum hot rolling frame F2. Analyzing different rolling process parameters on the influence of the temperature field distribution regularity, and by adjusting the rolled-piece technology parameters to control temperature distribution, so as to achieve the purpose of improving product quality, and to provide theoretical basis for production of aluminum strip.


Author(s):  
P. R. Swann ◽  
W. R. Duff ◽  
R. M. Fisher

Recently we have investigated the phase equilibria and antiphase domain structures of Fe-Al alloys containing from 18 to 50 at.% Al by transmission electron microscopy and Mössbauer techniques. This study has revealed that none of the published phase diagrams are correct, although the one proposed by Rimlinger agrees most closely with our results to be published separately. In this paper observations by transmission electron microscopy relating to the nucleation of disorder in Fe-24% Al will be described. Figure 1 shows the structure after heating this alloy to 776.6°C and quenching. The white areas are B2 micro-domains corresponding to regions of disorder which form at the annealing temperature and re-order during the quench. By examining specimens heated in a temperature gradient of 2°C/cm it is possible to determine the effect of temperature on the disordering reaction very precisely. It was found that disorder begins at existing antiphase domain boundaries but that at a slightly higher temperature (1°C) it also occurs by homogeneous nucleation within the domains. A small (∼ .01°C) further increase in temperature caused these micro-domains to completely fill the specimen.


Author(s):  
Reza Masoudi Nejad ◽  
Peyman Noroozian Rizi ◽  
Maedeh Sadat Zoei ◽  
Karim Aliakbari ◽  
Hossein Ghasemi

2013 ◽  
Vol 197 ◽  
pp. 232-237 ◽  
Author(s):  
Dariusz Kuc ◽  
Eugeniusz Hadasik

The paper presents a model of microstructure changes elaborated for magnesium alloy type AZ31. In previous papers, the function of flow stress was defined on the basis of uniaxial hot compression tests. On the basis of marked relaxation curves and quantitative tests of structure the softening indicators were defined together with elaboration of equations which describe the changes in the grain size. Marked coefficients of equations were introduced in the code of simulation program. Calculations were conducted for given temperature values from 450 ÷ 250°C and strain rate from 0.01 to 10 s-1, which correspond with rolling temperature range of this alloy. Prepared model will allow the proper choice of parameters in hot rolling process of this alloy to achieve the assumed microstructure.


2014 ◽  
Vol 783-786 ◽  
pp. 375-379
Author(s):  
Mitsuaki Furui ◽  
Shouyou Sakashita ◽  
Kazuya Shimojima ◽  
Tetsuo Aida ◽  
Kiyoshi Terayama ◽  
...  

Extrusion-torsion simultaneous processing is a very attractive technique for fabricating a rod-shape material with fine grain and random texture. We have proposed a new screw form rolling process combined with preliminary extrusion-torsion simultaneous working. Microstructure evolution and mechanical property change of AZ91D magnesium alloy during extrusion-torsion simultaneous processing was examined through microstructure observation, X-ray diffraction analysis and micro-Vickers hardness measurement. By the addition of torsion, the crystal orientation of AZ91D magnesium alloy workpiece was drastically changed from basal crystalline orientation to the random orientation. Crystal grain occurred through the dynamic recrystallization and tended to coarsen with an increase of extrusion-torsion temperature. Grain refinement under 2 um was achieved at the lowest extrusion-torsion temperature of 523 K. M8 gauge AZ91D magnesium alloy screw was successfully formed at room temperature using the extrusion-twisted workpiece preliminary solution treating at 678 K for 345.6 ks. It was found that the extrusion-torsion temperature of 678 K must be selected to fabricate the good screw without any defects.


2011 ◽  
Vol 686 ◽  
pp. 120-124
Author(s):  
Jin Ping Fan ◽  
She Bin Wang ◽  
Bing She Xu

The effects of Sr addition on the mechanical properties and microstructure of Mg-6Al mag- nesium alloy both at 25 °C and at 175 °C were investigated by means of OM, SEM and EDS and XRD. Upon the Sr addition of 2%, the tensile strength was increased by 7.2% to 184.4MPa at 25 °C, while it was increased by 30% to 155.4MPa at 175 °C. The strengthening mechanism of Mg-6Al-xSr at lower temperature (25 °C) was different from that at higher temperature (175°C). The results show that the addition of strontium effectively improved the microstructure and mechanical properties of magnesium alloy.


2016 ◽  
Vol 716 ◽  
pp. 864-870
Author(s):  
Andrzej Stefanik ◽  
Piotr Szota ◽  
Sebastian Mróz ◽  
Teresa Bajor ◽  
Sonia Boczkal

This paper presents the research results of the microstructure changes of the round rods of AZ31 magnesium alloy in the hot rolling processes. The rolling was conducted in duo mill and a three-high skew rolling mill. Numerical modelling of the AZ31 magnesium alloy round rods rolling process was conducted using a computer program Forge 2011®. The verification of the results of numerical modelling was carried out during laboratory tests in a two-high rolling mill D150 and a three-high skew rolling mill RSP 40/14. Distributions of the total effective strain and temperature during AZ31 rods rolling process were determined on the basis of the theoretical analysis. Microstructure and texture changes during both analysed processes were studied.


Sign in / Sign up

Export Citation Format

Share Document