scholarly journals The Use of Glass from Photovoltaic Panels at the End of Their Life Cycle in Cement Composites

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6655
Author(s):  
Kateřina Máčalová ◽  
Vojtěch Václavík ◽  
Tomáš Dvorský ◽  
Róbert Figmig ◽  
Jakub Charvát ◽  
...  

This article deals with the use of photovoltaic panels at the end of their life cycle in cement composites. Attention is focused on the properties of cement composite after 100% replacement of natural aggregate with recycled glass from photovoltaic panels. This goal of replacing natural filler sources with recycled glass is based on the updated policy of the Czech Republic concerning secondary raw materials for the period of 2019–2022, which aims to increase the self-sufficiency of the Czech Republic in raw materials by replacing primary sources with secondary raw materials. The policy also promotes the use of secondary raw materials as a tool to reduce the material and energy demands of industrial production and supports the innovations and development of a circular economy within business. The research has shown that it is possible to prepare cement composite based on recycled glass from solar panels, with compressive and flexural strength after 28 days exceeding 40 MPa and 4 MPa. Furthermore, a possible modification of the cement composite with different pigments has been confirmed, without disrupting the contact zone.

2015 ◽  
Vol 729 ◽  
pp. 58-63
Author(s):  
Jana Hodná ◽  
Vit Petranek ◽  
Bozena Dohnalkova

The article reports on a hot topic over the last few years and the issue of recycling and further use of secondary raw materials from the solar panels. Recycling of solar panels is very difficult and complicated. Secondary materials that recycling generated so far have not found a application and their using is still not fully resolved. The research conducted on Brno University of Technology, Faculty of Civil Engineering (BUT) now being developed polymer materials used for industrial floors. These materials were incorporated secondary materials as fillers. It was thus replaced by a filler made from natural materials, which the Czech Republic is still declining. In the following text, which builds on earlier publications describe the procedures and results of new tests, which were conducted on these fuels, which confirms the possibility of the use of glass from solar panel in industrial polymer flooring systems.


Author(s):  
Renata Kučerová

The paper deals with the analysis of changes in the development of basic characteristics of the dairy industry in the Czech Republic, which cohere with the integration of the Czech Republic into the European Union. The attention is paid on size of the market, growth rate, life cycle, development of prices and development of foreign trade. The total domestic consumption reached 2111.1 million litres in 2004. The industry is in the maturity. The excess of supply exists in the industry; the growth rate is low, under 5% per year. The integration of the Czech Republic into the EU didn’t bring about changes in the development of basic characteristics – size of the market, growth rate, and life cycle. The volume of production changed. The total volume of purchase of raw milk for production went down by 1.4% to the value in 2000. And all prices in the product vertical – milk and milk products (prices of agricultural producers, production prices and consumer’s prices) rose.The paper is a part of solution of the research plan of the FBE MUAF in Brno, No. MSM 6215648904.


Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5833
Author(s):  
Markéta Šerešová ◽  
Jiří Štefanica ◽  
Monika Vitvarová ◽  
Kristina Zakuciová ◽  
Petr Wolf ◽  
...  

As both the human population and living standards grow, so does the worldwide electricity demand. However, the power sector is also one of the biggest environmental polluters. Therefore, options are currently being sought aimed at reducing environmental impacts, one of the potential tools for which concerns the use of life cycle assessment. This study, therefore, focuses on the most commonly used nonrenewable (black coal, lignite, natural gas and nuclear) and renewable sources (wind, hydro and photovoltaic) in the Czech Republic in terms of their construction, operation, and decommissioning periods. Environmental impacts are assessed via the use of selected impact categories by way of product environmental footprint methodology. The results highlight the potential environmental impacts associated with electricity generation for each of the primary energy sources. Black coal and lignite power plants were found to contribute most to the global warming, resource use, energy carriers and respiratory inorganics categories. On the other hand, the impact on water depletion and resource use, mineral and metals categories were found to be most significantly affected by the production of electricity from photovoltaic power plants. Finally, it is proposed that the results be employed to design scenarios for the future energy mix.


Environments ◽  
2019 ◽  
Vol 6 (3) ◽  
pp. 38 ◽  
Author(s):  
Simona Jursova ◽  
Dorota Burchart-Korol ◽  
Pavlina Pustejovska

In the light of recent developments regarding electric vehicle market share, we assess the carbon footprint and water footprint of electric vehicles and provide a comparative analysis of energy use from the grid to charge electric vehicle batteries in the Czech Republic. The analysis builds on the electricity generation forecast for the Czech Republic for 2015–2050. The impact of different sources of electricity supply on carbon and water footprints were analyzed based on electricity generation by source for the period. Within the Life Cycle Assessment (LCA), the carbon footprint was calculated using the Intergovernmental Panel on Climate Change (IPCC) method, while the water footprint was determined by the Water Scarcity method. The computational LCA model was provided by the SimaPro v. 8.5 package with the Ecoinvent v. 3 database. The functional unit of study was running an electric vehicle over 100 km. The system boundary covered an electric vehicle life cycle from cradle to grave. For the analysis, we chose a vehicle powered by a lithium-ion battery with assumed consumption 19.9 kWh/100 km. The results show that electricity generated to charge electric vehicle batteries is the main determinant of carbon and water footprints related to electric vehicles in the Czech Republic. Another important factor is passenger car production. Nuclear power is the main determinant of the water footprint for the current and future electric vehicle charging, while, currently, lignite and hard coal are the main determinants of carbon footprint.


Author(s):  
Karel Svoboda ◽  
Josef Podlaha ◽  
David Sˇi´r ◽  
Josef Mudra

In recent years, the amount of radioactive materials seizures (captured radioactive materials) has been rising. It was above all due to newly installed detection facilities that were able to check metallic scrap during its collection in scrap yards or on the entrance to iron-mills, checking municipal waste upon entrance to municipal disposal sites, even incineration plants, or through checking vehicles going through the borders of the Czech Republic. Most cases bore a relationship to secondary raw materials or they were connected to the application of machines and installations made from contaminated metallic materials. However, in accordance to our experience, the number of cases of seizures of materials and devices containing radioactive sources used in the public domain was lower, but not negligible, in the municipal storage yards or incineration plants. Atomic Act No. 18/1997 Coll. will apply to everybody who provides activities leading to exposure, mandatory assurance as high radiation safety as risk of the endangering of life, personal health and environment is as low as reasonably achievable in according to social and economic aspects. Hence, attention on the examination of all cases of the radioactive material seizure based on detection facilities alarm or reasonably grounds suspicion arising from the other information is important. Therefore, a service carried out by group of workers who ensure assessment of captured radioactive materials and eventual retrieval of radioactive sources from the municipal waste has come into existence in the Nuclear Research Institute Rez plc. This service has covered also transport, storage, processing and disposal of found radioactive sources. This service has arisen especially for municipal disposal sites, but later on even other companies took advantage of this service like incineration plants, the State Office for Nuclear Safety, etc. Our experience in the field of ensuring assessment of captured radioactive materials and eventual retrieval of radioactive sources will be presented in the paper.


Biologia ◽  
2008 ◽  
Vol 63 (4) ◽  
Author(s):  
Petr Pařil ◽  
Jindřiška Bojková ◽  
Jan Špaček ◽  
Jan Helešic

AbstractThe first records of Leuctra geniculata Stephens, 1836 in the north-eastern border of its area (the Czech Republic) are presented and an overview of references, synonyms and distribution of the species is given. The ecological preferences of the species, supported by chemical and hydromorphological parameters, are defined. Probable dissemination paths into the Czech Republic and the supposed life cycle of the species are discussed. Photographs of morphological characters, SEM photos of eggs, associated macroinvertebrate assemblages (EPT taxa) and maps of distribution are included.


10.5219/1397 ◽  
2021 ◽  
Vol 15 ◽  
pp. 369-377
Author(s):  
Vratislav Kozák ◽  
Vendula Lapčíková

The questionnaire survey was focused on the relation of university students of generation Z in the Czech Republic to beer from microbreweries. The survey involved 1,103 respondents from among Czech university students. 1,004 respondents complied with the survey conditions (they had to belong to university students and consume beer). Although 98% of beer consumed in the Czech Republic is from industrial breweries, it has turned out that the proportion of students who consume beer from industrial breweries and microbreweries is almost the same. As for beer from microbreweries, students prefer classic beers of the Pilsen type. So far, these do not circulate in beer tourism in larger quantities. The respondents agree that beer tourism will compete successfully with wine tourism. For beer tourism to develop successfully, microbreweries must also offer catering, accommodation, and other services; beer baths are in high demand at present. The economic benefits of microbreweries are in several areas – they integrate into tourist destinations, use local raw materials for beer and food preparation, create new jobs, enhance abandoned breweries and contribute to the development of rural areas.


Sign in / Sign up

Export Citation Format

Share Document