scholarly journals Economic and Socio-Environmental Benefits of Dry Beneficiation of Magnetite Ores

Minerals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 955
Author(s):  
Emmanuel Baawuah ◽  
Christopher Kelsey ◽  
Jonas Addai-Mensah ◽  
William Skinner
Keyword(s):  
Cost Savings ◽  
Environmental Benefits ◽  
Magnetic Separator ◽  
Wet Process ◽  
Dry Processing ◽  
Ore Processing ◽  
Process Flowsheet ◽  
Wet Processing ◽  
The Cost ◽  
Dry Beneficiation

In our previous studies, we demonstrated the performance of novel superfine crusher and pneumatic planar magnetic separator as energy-efficient technologies for dry processing of magnetite ores. The present study investigates the economic and socio-environmental benefits of applying these technologies in conceptual dry magnetite ore processing flowsheet. The outcome of the study is compared with that of a conceptual wet processing flowsheet for the same ore. The cost estimations used are based on the Brook Hunt C1 methodology whilst revenue estimations are based on the Platts Iron Ore Index specification. The demonstrated economic and socio-environmental benefits show that dry processing flowsheet offers significant energy and cost savings and improved revenue generation compared with the wet process flowsheet. These findings are vital to the magnetite industry, particularly in water- and energy-scarce regions as a benchmark for future studies aimed at deepening and expanding the knowledge base of dry beneficiation of magnetite ores.

Exploration-Stage Implementation Variation

2014 ◽  
Vol 222 (1) ◽  
pp. 37-48 ◽  
Author(s):  
Stephanie Romney ◽  
Nathaniel Israel ◽  
Danijela Zlatevski
Keyword(s):  
Parent Training ◽  
Average Cost ◽  
Cost Savings ◽  
Training Group ◽  
Group Differences ◽  
Triple P ◽  
Community Based ◽  
Parent Training Program ◽  
A Site ◽  
The Cost

The present study examines the effect of agency-level implementation variation on the cost-effectiveness of an evidence-based parent training program (Positive Parenting Program: “Triple P”). Staff from six community-based agencies participated in a five-day training to prepare them to deliver a 12-week Triple P parent training group to caregivers. Prior to the training, administrators and staff from four of the agencies completed a site readiness process intended to prepare them for the implementation demands of successfully delivering the group, while the other two agencies did not complete the process. Following the delivery of each agency’s first Triple P group, the graduation rate and average cost per class graduate were calculated. The average cost-per-graduate was over seven times higher for the two agencies that had not completed the readiness process than for the four completing agencies ($7,811 vs. $1,052). The contrast in costs was due to high participant attrition in the Triple P groups delivered by the two agencies that did not complete the readiness process. The odds of Triple P participants graduating were 12.2 times greater for those in groups run by sites that had completed the readiness process. This differential attrition was not accounted for by between-group differences in participant characteristics at pretest. While the natural design of this study limits the ability to empirically test all alternative explanations, these findings indicate a striking cost savings for sites completing the readiness process and support the thoughtful application of readiness procedures in the early stages of an implementation initiative.

REKAYASA NILAI HARGA PEMBUATAN TERHADAP EFEKTIFITAS PENGGUNAAN BAHAN PADA PEMBANGUNAN PERUMAHAN TIRTO PENATARAN ASRI TIPE 70/135 KECAMATAN NGLEGOK KABUPATEN BLITAR

2017 ◽  
Vol 7 (1) ◽  
pp. 43-52
Author(s):  
Mochamad Tamim Ma’ruf
Keyword(s):  
Engineering Application ◽  
Cost Savings ◽  
Comparison Method ◽  
Value Engineering ◽  
Design Work ◽  
Housing Projects ◽  
Initial Design ◽  
A Value ◽  
The Cost ◽  
Design Proposal

One-solving methods and techniques necessary to avoid inefficiencies and not economic costs as well as reduce the cost of housing construction is the method of Value Engineering. Value engineering is a method and cost control techniques to analyze a function to its value at the lowest cost alternative (most economical) without reducing the quality desired.At the writing of this study used a comparison method by comparing the initial design to the design proposal of the author. In the housing projects Upgrading Tirto Penataran Asri type 70, the application of Value Engineering conducted on the job a couple walls and roofs pair by replacing some work items with a more economical alternative but does not change the original function and high aesthetic level and still qualify safe. For that performed the step of determining a work item, the alternative stage, the analysis stage, and the stage of recommendations to get a Value Engineering application and cost savings against the wall a couple of work items and partner roof.The proposed design as compared to the initial design. Work items discussed was the work of a couple wall having analyzed obtained savings of Rp. 2,747,643.56 and the work of the roof pair obtained savings of Rp. 2,363,446.80. Thus the total overall savings gained is Rp 5,111,090.36 or savings of 0048%.

Cost-minimization analysis of drugs used in the treatment of Asthma and COPD diseases in India

2020 ◽  
Vol 15 ◽  
Author(s):  
Billu Payal ◽  
Anoop Kumar ◽  
Harsh Saxena
Keyword(s):  
Generic Drugs ◽  
Cost Minimization ◽  
Cost Savings ◽  
Chronic Obstructive ◽  
Pulmonary Medicine ◽  
Potential Cost ◽  
Maximum Cost ◽  
Cost Minimization Analysis ◽  
Cost Variation ◽  
The Cost

Background: Asthma and Chronic Obstructive Pulmonary Diseases (COPD) are well known respiratory diseases affecting millions of peoples in India. In the market, various branded generics, as well as generic drugs, are available for their treatment and how much cost will be saved by utilizing generic medicine is still unclear among physicians. Thus, the main aim of the current investigation was to perform cost-minimization analysis of generic versus branded generic (high and low expensive) drugs and branded generic (high expensive) versus branded generic (least expensive) used in the Department of Pulmonary Medicine of Era Medical University, Lucknow for the treatment of asthma and COPD. Methodology: The current index of medical stores (CIMS) was referred for the cost of branded drugs whereas the cost of generic drugs was taken from Jan Aushadi scheme of India 2016. The percentage of cost variation particularly to Asthma and COPD regimens on substituting available generic drugs was calculated using standard formula and costs were presented in Indian Rupees (as of 2019). Results: The maximum cost variation was found between the respules budesonide high expensive branded generic versus least expensive branded generic drugs and generic versus high expensive branded generic. In combination, the maximum cost variation was observed in the montelukast and levocetirizine combination. Conclusion: In conclusion, this study inferred that substituting generic antiasthmatics and COPD drugs can bring potential cost savings in patients.

Pound Wise and Penny Foolish? Weight Loss and The Dynamics of Health Care Spending

2011 ◽  
Vol 14 (2) ◽  
Author(s):  
Thomas G Koch
Keyword(s):  
Weight Loss ◽  
Cost Savings ◽  
Cost Effective ◽  
Economic Consequences ◽  
Health Care Spending ◽  
Order Of Magnitude ◽  
Dynamic Measures ◽  
The Cost ◽  
The Impact ◽  
The Relationship

Current estimates of obesity costs ignore the impact of future weight loss and gain, and may either over or underestimate economic consequences of weight loss. In light of this, I construct static and dynamic measures of medical costs associated with body mass index (BMI), to be balanced against the cost of one-time interventions. This study finds that ignoring the implications of weight loss and gain over time overstates the medical-cost savings of such interventions by an order of magnitude. When the relationship between spending and age is allowed to vary, weight-loss attempts appear to be cost-effective starting and ending with middle age. Some interventions recently proven to decrease weight may also be cost-effective.

scholarly journals Is an integrated model of school eye health delivery more cost-effective than a vertical model? An implementation research in Zanzibar

2021 ◽  
Vol 6 (1) ◽  
pp. e000561
Author(s):  
Ving Fai Chan ◽  
Fatma Omar ◽  
Elodie Yard ◽  
Eden Mashayo ◽  
Damaris Mulewa ◽  
...  
Keyword(s):  
Implementation Research ◽  
Cost Savings ◽  
Cost Effective ◽  
Integrated Model ◽  
Health Screening ◽  
High Coverage ◽  
Health Delivery ◽  
Screening Cost ◽  
Eye Health ◽  
The Cost

ObjectiveTo review and compare the cost-effectiveness of the integrated model (IM) and vertical model (VM) of school eye health programme in Zanzibar.Methods and analysisThis 6-month implementation research was conducted in four districts in Zanzibar. Nine and ten schools were recruited into the IM and VM, respectively. In the VM, teachers conducted eye health screening and education only while these eye health components were added to the existing school feeding programme (IM). The number of children aged 6–13 years old screened and identified was collected monthly. A review of project account records was conducted with 19 key informants. The actual costs were calculated for each cost categories, and costs per child screened and cost per child identified were compared between the two models.ResultsScreening coverage was 96% and 90% in the IM and VM with 297 children (69.5%) from the IM and 130 children (30.5%) from VM failed eye health screening. The 6-month eye health screening cost for VM and IM was US$6 728 and US$7 355. The cost per child screened for IM and VM was US$1.23 and US$1.31, and the cost per child identified was US$24.76 and US$51.75, respectively.ConclusionBoth models achieved high coverage of eye health screening with the IM being a more cost-effective school eye health delivery screening compared with VM with great opportunities for cost savings.

Are Roundabouts Safe and Economically Viable Replacing Conventional Diamond Interchange Ramp Terminals?

2021 ◽  
pp. 036119812110088
Author(s):  
Boris Claros ◽  
Beau Burdett ◽  
Madhav Chitturi ◽  
Andrea Bill ◽  
David A. Noyce
Keyword(s):  
Empirical Bayes ◽  
Methodological Approach ◽  
Cost Savings ◽  
Weighted Distribution ◽  
Crash Rates ◽  
Design Considerations ◽  
Rate Analysis ◽  
The Cost ◽  
Benefit Cost ◽  
Service Life Cycle

Roundabout implementations at traditional intersections have been shown to be effective at reducing severe crashes. Roundabouts have also been implemented at interchange ramp terminals; however, limited research is available. In this study, 25 roundabout ramp terminal implementations were evaluated. The methodological approach consisted of Empirical Bayes for safety effectiveness and crash cost changes, crash type weighted distribution, crash rate analysis of bypass configuration, and cost of implementation. Roundabouts were effective at reducing fatal and injury crashes when replacing existing interchange diamond ramp terminals: 65% reduction for roundabouts replacing stop-controlled ramp terminals and 41% reduction for roundabouts replacing signal-controlled ramp terminals. Observed crash type weighted distributions are provided to visualize the frequency and location of crashes within roundabout ramp terminals for design considerations. Exit ramp and outside crossroad approaches with right-turn bypass showed significantly lower crash rates than designs without bypass. The crash cost analysis showed that roundabouts replacing diamond ramp terminals yielded crash cost savings of between $95,000 and $253,000 per site per year (69% to 54% decrease in crash costs). Considering crash costs savings only, the cost of implementation should be less than $1.9 million for a roundabout replacing a stop-controlled ramp terminal and less than $5.1 million for a roundabout replacing a signal-controlled ramp terminal to accomplish benefit-cost ratios greater than one for a service life cycle of 20 years. Costs are in 2019 dollars.

scholarly journals Socio-Technical Viability Framework for Micro Hydropower in Group Water-Energy Schemes

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4222
Author(s):  
Kemi Adeyeye ◽  
John Gallagher ◽  
Aonghus McNabola ◽  
Helena M. Ramos ◽  
Paul Coughlan
Keyword(s):  
Cost Savings ◽  
Environmental Benefits ◽  
Technology Readiness ◽  
Water Networks ◽  
Policy Context ◽  
Recovery Potential ◽  
Sustainability Strategy ◽  
Financial Benefits ◽  
Group Water ◽  
Political Dimensions

Most renewable energy (RE) studies focus on technology readiness, environmental benefits and/or cost savings. The market permeation, viability and adoption of RE technologies such as micro hydropower (MHP), however, require the alignment of other interrelated factors, such as the socio-technical, institutional and political dimensions. This is particularly the case where the energy recovery potential in decentralised water networks is being explored as part of a wholesome sustainability strategy by and for individual and communal prosumers. This study employs a socio-technical approach to understand factors that influence the perceived viability and adoption of MHP in group water-energy schemes. Methods included a progressive literature review to formulate a conceptual framework for the implementation of MHP systems. The framework was validated using survey data from representative stakeholders from groups schemes in Ireland and Spain. These stakeholders were sampled and surveyed at the stage of considering the adoption of MHP in their water networks. The findings highlight the push–pull factors and discusses the opportunities and barriers to the adoption of MHP systems. It confirms that the market, institutional and policy context, cost and financial benefits, social support and collaborative services combine to influence the adoption of MHP technology. Thus, a framework for evaluating the socio-technical viability of MHP systems based on these more realistic integrated, multi-dimensional criteria is proposed.

Economic analysis of endobronchial ultrasound (EBUS) as a tool in the diagnosis and staging of lung cancer in Singapore

2010 ◽  
Vol 26 (2) ◽  
pp. 170-174 ◽  
Author(s):  
Shin Yuh Ang ◽  
Rachel Woo Yin Tan ◽  
Mariko Siyue Koh ◽  
Jeremy Lim
Keyword(s):  
Lung Cancer ◽  
Lung Biopsy ◽  
Cost Savings ◽  
Needle Aspiration ◽  
The Other ◽  
Transbronchial Lung Biopsy ◽  
Endobronchial Ultrasound ◽  
Economic Evaluations ◽  
Diagnosis Of Lung Cancer ◽  
The Cost

Objectives: Endobronchial ultrasound (EBUS), encompassing endobronchial ultrasound transbronchial needle aspiration (EBUS-TBNA) and Endobronchial ultrasound transbronchial lung biopsy (EBUS-TBLB) has been proven to be a useful modality in the staging and diagnosis of lung cancer. However, there are limited publications on the cost-effectiveness of EBUS and no economic evaluations relevant to the Singapore setting. An economic evaluation using our hospital's data was used to assess the cost implications of EBUS substituting where clinically appropriate: transthoracic needle aspiration; (TTNA), fluoroscopy-guided transbronchial lung biopsy (TBLB), and mediastinoscopy in the diagnosis and staging of lung cancer.Methods: Relationship between the clinical and economic implications of alternative modalities was modeled using data inputs that were relevant to the Singapore setting. Two decision analytic models were constructed to evaluate the cost of EBUS compared with TTNA, TBLB, and staging mediastinoscopy. Only direct costs were imputed.Results: In the base–case analysis, TTNA was the most economical strategy (SGD3,335 = US$2,403) where clinically suitable for the diagnosis of lung cancer as compared to the other options: TBLB (SGD4,499) and EBUS-TBLB (SGD4,857). On the other hand, EBUS-TBNA resulted in expected cost savings of SGD1,214 per positive staging of lung cancer as compared to mediastinoscopy.Conclusions: The use of EBUS-TBNA could result in cost savings of SGD1,214 per positive staging of lung cancer as compared to mediastinoscopy. Whereas TTNA was the most economical intervention for the diagnosis of lung cancer as compared to the other options, its main limitation lies in its suitability only for peripheral lung lesions and high complication rate.

scholarly journals Self-fill oxygen technology: benefits for patients, healthcare providers and the environment

Breathe ◽  
2016 ◽  
Vol 12 (2) ◽  
pp. 113-119 ◽  
Author(s):  
Phyllis Murphie ◽  
Nick Hex ◽  
Jo Setters ◽  
Stuart Little
Keyword(s):  
Positive Impact ◽  
Healthcare Providers ◽  
Cost Savings ◽  
Cost Effective ◽  
Evidence Base ◽  
Environmental Benefits ◽  
List Type ◽  
Potential Cost ◽  
Unlimited Supply ◽  
Technology Benefits

“Non-delivery” home oxygen technologies that allow self-filling of ambulatory oxygen cylinders are emerging. They can offer a relatively unlimited supply of ambulatory oxygen in suitably assessed people who require long-term oxygen therapy (LTOT), providing they can use these systems safely and effectively. This allows users to be self-sufficient and facilitates longer periods of time away from home. The evolution and evidence base of this technology is reported with the experience of a national service review in Scotland (UK). Given that domiciliary oxygen services represent a significant cost to healthcare providers globally, these systems offer potential cost savings, are appealing to remote and rural regions due to the avoidance of cylinder delivery and have additional lower environmental impact due to reduced fossil fuel consumption and subsequently reduced carbon emissions. Evidence is emerging that self-fill/non-delivery oxygen systems can meet the ambulatory oxygen needs of many patients using LTOT and can have a positive impact on quality of life, increase time spent away from home and offer significant financial savings to healthcare providers.Educational aimsProvide update for oxygen prescribers on options for home oxygen provision.Provide update on the evidence base for available self-fill oxygen technologies.Provide and update for healthcare commissioners on the potential cost-effective and environmental benefits of increased utilisation of self-fill oxygen systems.

Are Apprenticeships Still Relevant in the 21st Century? A Case Study of Changing Youth Training Arrangements in German Banks

ILR Review ◽  
2002 ◽  
Vol 55 (4) ◽  
pp. 667-685 ◽  
Author(s):  
David Finegold ◽  
Karin Wagner
Keyword(s):  
21St Century ◽  
Cost Savings ◽  
New Firms ◽  
Workplace Flexibility ◽  
Transferable Skills ◽  
The Past ◽  
Detailed Case ◽  
The Cost ◽  
Youth Training

The authors present a detailed case study of the evolution of apprenticeships in German banking over the past two decades to analyze why employers continue to be willing to invest in these programs that provide workers with transferable skills. They explain employers' motivation in terms of two “logics.” Some considerations stemming from the logic of consequences, such as recruitment cost savings and enhanced workplace flexibility, encourage retention of the apprenticeship system. On balance, however, the cost calculus that is at the heart of the logic of consequences would, if unopposed, encourage head-hunting for apprentices trained by other firms, eventually undermining the system. The countervailing logic of appropriateness, however, discourages defections from the system by fostering trust among employers, encouraging new firms to participate in the system, supporting the strong reputational effect associated with training, and creating mechanisms with which banks can have a hand in keeping the system efficient.

Sign in / Sign up

Export Citation Format

Share Document